CA12584-LXB2-RS2 [CREE]
Leila series; 莱拉系列型号: | CA12584-LXB2-RS2 |
厂家: | CREE, INC |
描述: | Leila series |
文件: | 总9页 (文件大小:830K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
PRODUCT DATASHEET
Leila series
last update 4/6/2012
Ordering number CA12584_LXB2-RS2
Family
Leila
FWHM
9 degrees
85 %
Type
Assembly
XB-D
Efficiency
cd/lm
LED
21.000
Color
Black
Gerber File
Available
Diameter
Height
21.6 mm
14.6 mm
Round
PMMA
PC
Style
Optic Material
Holder Material
Fastening
Status
Tape
Ready
Ordering number CA12844_LXB2-O-90
Family
Leila
FWHM
10+36 degrees
80 %
Type
Assembly
XB-D
Efficiency
cd/lm
LED
4.680
Color
Black
Gerber File
Available
Diameter
Height
21.6 mm
14.6 mm
Round
PMMA
PC
Style
Optic Material
Holder Material
Fastening
Status
Tape
Ready
Ordering number CA12665_LXB2-D
Family
Leila
FWHM
12 degrees
80 %
Type
Assembly
XB-D
Efficiency
cd/lm
LED
11.500
Color
Black
Gerber File
Available
Diameter
Height
21.6 mm
14.6 mm
Round
PMMA
PC
Style
Optic Material
Holder Material
Fastening
Status
Tape
Ready
Ordering number CA12666_LXB2-M
Family
Leila
FWHM
22 degrees
81 %
Type
Assembly
XB-D
Efficiency
cd/lm
LED
4.590
Color
Black
Gerber File
Available
Diameter
Height
21.6 mm
14.6 mm
Round
PMMA
PC
Style
Optic Material
Holder Material
Fastening
Status
Tape
Ready
October 19th 2012 0:25 Copyright Ledil Oy - Subject to change without prior notice - Page 1/3
Ledil Oy
http://www.ledil.com
email: ledil@ledil.com
FAX: +358-2-733 8001
Salorankatu 10
24240 SALO
Finland
PRODUCT DATASHEET
Leila series
last update 4/6/2012
Ordering number CA12667_LXB2-W
Family
Leila
FWHM
41 degrees
81 %
Type
Assembly
XB-D
Efficiency
cd/lm
LED
1.630
Color
Black
Gerber File
Available
Diameter
Height
21.6 mm
14.6 mm
Round
PMMA
PC
Style
Optic Material
Holder Material
Fastening
Status
Tape
Ready
NOTE: The typical divergence will be changed by different color, chip size and chip position
tolerance. The typical total divergence is the full angle measured where the luminous intensity
is half of the peak value.
October 19th 2012 0:25 Copyright Ledil Oy - Subject to change without prior notice - Page 2/3
Ledil Oy
http://www.ledil.com
Salorankatu 10
24240 SALO
Finland
email: ledil@ledil.com
FAX: +358-2-733 8001
PRODUCT DATASHEET
Leila series
last update 4/6/2012
GENERAL INFORMATION
- Product series especially designed & optimized for XB-D series of LEDs.
- Special care taken to make light distribution as uniform as possible.
- Lens material optical grade PMMA with high UV and temperature resistance (105 degrees of Celcius / 220
degrees of Fahrenheit). Allows use of high current and temperature conditions.
Please find more information about used material from below:
http://ledil.fi/sites/default/files/Documents/Technical/Material/PMMA%208N%20UL94_Yellow%20Card.pdf
http://ledil.fi/sites/default/files/Documents/Technical/Material/PMMA%208N%20PLEXIGLAS-Datasheet.pdf
- Optic holder molded by high quality PC material (120 dergees of Celcius / 248 degrees of Fahrenheit).
- Fastening to heat sink with a PU foam adhesive tape of automotive grade. Please find fastening details by
clicking link: http://www.ledil.com/datasheets/DataSheet_TAPE.pdf
NOTE 1: We advise customer to ensure the suitability and sufficiency of the bond in the end
product. For example, mechanical stress, vibration and holes on the surface of the circuit boar
weaken the strength of the tape.
NOTE 2: Assembly to the surface must be made straight, so the tape bonds constant and
balanced with fastening surface. Slanted assembly might cause unbalanced bond to the
surface. All surfaces where tape is applied must be clean, dry and free from grease and dirt.
If cleaning of PCB surfaces is needed, please follow strictly the cleaning instructions of your
LED manufacturer - this is important as cleaning shall under no circumstances damage LEDs or
other electronics components on the PCB.
Further note that optical components shall not be cleaned with any chemicals - only micro fiber
cloth may be used to remove fingerprints or other traces from handling.
October 19th 2012 0:25 Copyright Ledil Oy - Subject to change without prior notice - Page 3/3
Ledil Oy
http://www.ledil.com
email: ledil@ledil.com
FAX: +358-2-733 8001
Salorankatu 10
24240 SALO
Finland
2.5
4
3
2
1
Isometric view
Scale: 1:1
Tape
Holder
Lens
Materials:
Lens PMMA
Holder PC, Black
Tape PU foam with PSA
Tolerances for dimensions:
0-20mm tolerance value +-0.1mm
21-45mm tolerance value +-0.2mm
46-90mm tolerance value +-0.3mm
91-100mm tolerance value +-0.4mm
101-mm tolerance value +-0.5mm
Ledil Oy
This drawing is our property.
It can't be reproduced
or communicated without
our written agreement.
Salorankatu 10
FIN 24240 SALO
Finland
DRAWING TITLE
DRAWN BY
DATE
Datasheet LXB2 Tape Assy
pv
11.04.2012
CHECKED BY
DATE SIZE DRAWING NUMBER
REV
sn
-
19.01.2012
1
A4
DESIGNED BY
pv
DATE
19.01.2012
SCALE 2:1 WEIGHT(g)
SHEET 1/1
A
相关型号:
©2020 ICPDF网 联系我们和版权申明