CCCCC-DXF-XHHKKMR4 [CREE]
Cree® Screen Master® 4-mm Oval LED;型号: | CCCCC-DXF-XHHKKMR4 |
厂家: | CREE, INC |
描述: | Cree® Screen Master® 4-mm Oval LED |
文件: | 总10页 (文件大小:897K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
PRODUCT FAMILY DATA SHEET
Cree® Screen Master® 4-mm Oval LED
C4SMA-RGY/GGY/BGY
PRODUCT DESCRIPTION
FEATURES
APPLICATIONS
•
Size (mm): 4
These oval LEDs are specifically de-
signed for full-color video screens, dig-
ital billboards and passenger-informa-
tion signs. The oval-shaped radiation
pattern and high luminous intensity
ensure that these devices are excel-
lent for bright sunlight or low power
consumption outdoor applications.
•
Electronic Signs & Signals
(ESS)
•
Color and Typical Dominant
Wavelength:
Red (621nm)
Green(527nm)
Blue(472nm)
•
•
•
•
•
•
Full Color Video Screen
Digital Billboards
Motorway Signs
•
Luminous Intensity (mcd)
Variable Message Sign (VMS)
Advertising Signs
Petrol Signs
C4SMA-RGY: (1017-2347)@15mA
C4SMA-GGY: (1672-3885)@15mA
C4SMA-BGY: (605-1415)@10mA
These lamps are made with an ad-
vanced optical-grade epoxy that offers
superior high-temperature and high-
moisture-resistance performance in
outdoor signal and sign applications.
The encapsulation resin contains anti-
UV material in order to reduce the ef-
fects of long-term exposure to direct
sunlight.
•
•
Lead - Free
RoHS Compliant
Copyright © 2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
the Cree logo are registered trademarks of Cree, Inc.
USA Tel: +1.919.313.5300
Cree 4-mm Oval LED
C4SMA-RGY/GGY/BGY
ABSOLUTE MAXIMUM RATINGS (TA = 25°C)
Items
Symbol
Absolute Maximum Rating
Red Blue and Green
Unit
Note1
Forward Current
Peak Forward Current
Reverse Voltage
IF
50
35
100
5
mA
mA
V
Note2
IFP
VR
PD
200
5
Power Dissipation
130
140
mW
°C
Operation Temperature
Storage Temperature
T
-40 ~ +95
opr
Tstg
Tsol
-40 ~ +100
°C
Max. 260°C for 3 sec. max.
(3 mm from the base of the epoxy bulb)
Lead Soldering Temperature
Electrostatic Discharge
Classification (MIL-STD-883E)
ESD
Class 2
Note:
1. For long term performance the drive currents between 10mA and 30mA are recommended. Please contact CREE
sales representative for more information on recommended drive conditions.
2. Pulse width ≤0.1 msec, duty ≤1/10.
TYPICAL ELECTRICAL & OPTICAL CHARACTERISTICS (TA = 25°C)
Characteristics
Color
Red
Symbol
Condition
IF = 15 mA
IF = 10 mA
Unit
V
Minimum
Typical
2.0
Maximum
2.6
VF
VF
Green
V
3.0
3.8
Forward Voltage
Blue
Red
VF
IR
IF = 10 mA
VR = 5 V
V
2.9
3.8
100
100
624
540
475
μA
μA
nm
nm
nm
Reverse Current
Blue/Green
Red
IR
VR = 5 V
λD
λD
λD
IF = 15 mA
IF = 10 mA
IF = 10 mA
619
520
465
621
527
472
Green
Blue
Dominant Wavelength
Red
Green
Blue
IV
IV
IV
IF = 15 mA
IF = 10 mA
IF = 10 mA
mcd
mcd
mcd
1017
1672
605
1500
2500
900
Luminous Intensity
Note: Continuous reverse voltage can cause LED damage.
Copyright © 2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
2
Cree 4-mm Oval LED
C4SMA-RGY/GGY/BGY
INTENSITY BIN LIMIT (RED IF = 15 mA, GREEN IF = 10 mA, BLUE IF = 10 mA)
Green: C4SMA-GGY
Blue: C4SMA-BGY
Red: C4SMA-RGY
Bin Code
Min.(mcd)
Max.(mcd)
Bin Code
Min.(mcd)
Max.(mcd)
Bin Code
Min.(mcd)
Max.(mcd)
R2
R3
R4
S1
S2
S3
S4
T1
T2
T3
605
660
660
715
U2
U3
U4
V1
V2
V3
V4
W1
W2
W3
1672
1824
1976
2130
2347
2564
2781
3000
3295
3590
1824
1976
2130
2347
2564
2781
3000
3295
3590
3885
S4
T1
T2
T3
T4
U1
U2
U3
U4
V1
1017
1100
1205
1310
1415
1520
1672
1824
1976
2130
1100
1205
1310
1415
1520
1672
1824
1976
2130
2347
715
770
770
852
852
934
934
1017
1100
1205
1310
1415
1017
1100
1205
1310
• Tolerance of measurement of luminous intensity is ±15%
COLOR BIN LIMIT (RED IF = 15 mA, GREEN IF = 10 mA, BLUE IF = 10 mA)
Blue
Red
Green
Bin Code
Min.(nm)
Max.(nm)
Bin Code
RB
Min.(nm)
Max.(nm)
Bin Code
Min.(nm)
Max.(nm)
B4
B45
B5
465
467.5
470
470
472.5
475
619
624
G7
G23
G8
520
522.5
525
525
527.5
530
G45
G9
527.5
530
532.5
535
G67
Ga
532.5
535
537.5
540
• Tolerance of measurement of dominant wavelength is ±1 nm
Copyright © 2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
3
Cree 4-mm Oval LED
C4SMA-RGY/GGY/BGY
ORDER CODE TABLE*
C4SMA-RGY
Luminous Intensity (mcd)
Dominant Wavelength
Pack-
age
Color
Kit Number
Min.
Max.
(nm)
Min.
Max.
Color Bin
Color Bin
(nm)
Red
Red
Red
Red
Red
Red
C4SMA-RGY-CS4V1BB1
C4SMA-RGY-CT24QBB1
C4SMA-RGY-CT34QBB1
C4SMA-RGY-CS4V1BB2
C4SMA-RGY-CT24QBB2
C4SMA-RGY-CT34QBB2
1017
2347
RB
RB
RB
RB
RB
RB
619
619
619
619
619
619
RB
RB
RB
RB
RB
RB
624
624
624
624
624
624
Bulk
Bulk
Any 4 consecutive sub-bins: T2(1205) - U3(1976)
Any 4 consecutive sub-bins: T3(1310) - U4(2130)
Bulk
1017
2347
Ammo
Ammo
Ammo
Any 4 consecutive sub-bins: T2(1205) - U3(1976)
Any 4 consecutive sub-bins: T3(1310) - U4(2130)
C4SMA-GGY
Luminous Intensity (mcd)
Dominant Wavelength
Pack-
age
Color
Kit Number
Min.
Max.
(nm)
Min.
Max.
Color Bin
Color Bin
(nm)
Green C4SMA-GGY-CU2W37a1
Green C4SMA-GGY-CU44Q7D1
Green C4SMA-GGY-CV14Q7D1
Green C4SMA-GGY-CU2W37a2
Green C4SMA-GGY-CU44Q7D2
Green C4SMA-GGY-CV14Q7D2
1672
3885
G7
520
Ga
540
Bulk
Bulk
Any 4 consecutive sub-bins: U4(1976) - W1(3295)
Any 4 consecutive sub-bins: V1(2130) - W2(3590)
Any 1 color bin from G7 (520) to Ga (540)
Any 1 color bin from G7 (520) to Ga (540)
Bulk
1672
3885
G7
520
Ga
540
Ammo
Ammo
Ammo
Any 4 consecutive sub-bins: U4(1976) - W1(3295)
Any 4 consecutive sub-bins: V1(2130) - W2(3590)
Any 1 color bin from G7 (520) to Ga (540)
Any 1 color bin from G7 (520) to Ga (540)
Copyright © 2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
4
Cree 4-mm Oval LED
C4SMA-RGY/GGY/BGY
ORDER CODE TABLE*
C4SMA-BGY
Luminous Intensity (mcd)
Dominant Wavelength
Pack-
age
Color
Kit Number
Min.
(nm)
Max.
(nm)
Min.
Max.
1415
Color Bin
Color Bin
Blue
Blue
Blue
Blue
Blue
Blue
C4SMA-BGY-CR2T3451
C4SMA-BGY-CR34Q4S1
C4SMA-BGY-CR44Q4S1
C4SMA-BGY-CR2T3452
C4SMA-BGY-CR34Q4S2
C4SMA-BGY-CR44Q4S2
605
B4
465
B5
475
Bulk
Bulk
Any 4 consecutive sub-bins: R3(660) - S4(1100)
Any 4 consecutive sub-bins: R4(715) - T1(1205)
Any 1 color bin from B4 (465) to B5 (475)
Any 1 color bin from B4 (465) to B5 (475)
Bulk
605
1415
B4
465
B5
475
Ammo
Ammo
Ammo
Any 4 consecutive sub-bins: R3(660) - S4(1100)
Any 4 consecutive sub-bins: R4(715) - T1(1205)
Any 1 color bin from B4 (465) to B5 (475)
Any 1 color bin from B4 (465) to B5 (475)
Notes:
1. The above kit numbers represent order codes that include multiple intensity-bin and color-bin codes. Only one
intensity-sub-bin code and one color-bin code will be shipped on each reel. Selected single intensity-bin, single
color-bin codes will be orderable in certain quantities. For example, any four consecutive sub-bins from V1 to W2
mean only one intensity bin with four sub-bins of the following brightness ranges (V1-V4, V2-W1, V3-W2) will be
shipped by Cree. For example, any one-color bin from G7 to Ga means only one color bin (G7 or G23 or G8 or G45
or G9 or G67 or Ga) will be shipped by Cree.
2. Please refer to the “Cree LED Lamp Reliability Test Standards” document
3. Please refer to the “Cree LED Lamp Soldering & Handling” document
#1
for reliability test conditions.
#2
for information about how to use this LED
product safely.
#1: Refer to http://www.cree.com/led-components/media/documents/LED_Lamp_Reliability_Test_Standard.pdf
#2: Refer to http://www.cree.com/led-components/media/documents/sh-HB.pdf
Copyright © 2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
5
Cree 4-mm Oval LED
C4SMA-RGY/GGY/BGY
GRAPHS
The above data are collected from statistical figures that do not necessarily correspond to the actual
parameters of each single LED. Hence, these data will be changed without further notice.
Copyright © 2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
6
Cree 4-mm Oval LED
C4SMA-RGY/GGY/BGY
MECHANICAL DIMENSIONS
All dimensions are in mm. Tolerance is ±0.25 mm unless otherwise noted.
An epoxy meniscus may extend about 1.5 mm down the leads.
Burr around bottom of epoxy may be 0.5 mm max.
NOTES
Lead Frame Materials
Ag-plated and Lead-free Solder-plated iron.
RoHS Compliance
The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or other-
wise restricted materials in this product are below the maximum concentration values (also referred to as the threshold
limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/
EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as
amended through April 21, 2006.
Vision Advisory Claim
Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye.
Copyright © 2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
7
Cree 4-mm Oval LED
C4SMA-RGY/GGY/BGY
KIT NUMBER SYSTEM
All dimensions in mm.Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color,
forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to
the “Cree LED Lamp Packaging Standard” document for more information about shipping and packaging options.
Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following man-
ner:
C C C C C - P r o d u c t S e r i e s
D - C o l o r
G - O p t i o n
S : S t a n d o f f
N : N o S t a n d o f f
B : B l a c k F a c e
W : W h i t e F a c e
A : B l a c k B o d y
F : I r o n L e a d F r a m e w i t h S t a n d o f f
T - P a c k a g i n g Ty p e
1 : B u l k P a c k
2 : A m m o P a c k
3 : Ta p e & R e e l ( R o l l P a c k )
4 : Tu b e P a c k
C C C C C - D X G - X H H K K M N T
N - M a x . Wa v e l e n g t h / C h r o m a t i c i t y R a n g e
R : S e l e c t 1 h u e f r o m 4 h u e b i n s
S : S e l e c t 1 h u e f r o m 3 h u e b i n s
T : S e l e c t 1 h u e f r o m 2 h u e b i n s
U : S e l e c t 2 h u e f r o m 4 h u e b i n s
V : S e l e c t 2 h u e f r o m 3 h u e b i n s
M - M i n . Wa v e l e n g t h / C h r o m a t i c i t y R a n g e
R e f e r t o o r d e r c o d e t a b l e
K K - M a x i m u m I n t e n s i t y B i n
R e f e r t o o r d e r c o d e t a b l e
H H - M i n i m u m I n t e n s i t y B i n
R e f e r t o o r d e r c o d e t a b l e
*
P l e a s e c o n t a c t o u r s a l e s r e p r e s e n t a t i v e f o r o r d e r i n g i n f o r m a t i o n .
Copyright © 2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
8
Cree 4-mm Oval LED
C4SMA-RGY/GGY/BGY
REFLOW SOLDERING
The LED soldering specification is shown below(suitable for both leaded solder & lead-free solder):
Manual Soldering
Solder Dipping
Soldering iron
Temperature
35 W max
Preheat
110 ºC max
Preheat time
60 seconds max
300 ºC max
Solder-bath temperature 260 ºC Max
Soldering time
Position
3 seconds max
Dipping time
Position
5 seconds max
Not less than 3 mm from the base of the package.
Not less than 3 mm from the base of the package.
• Manual soldering onto the PCB is not recommended because soldering time is uncontrollable.
• The recommended wave soldering is as below:
300
laminar wave
250
200
150
100
Fluxing
50
30
0
Preheat
30 40
10
20
50
60
70
80
90
100
110
120
Times (sec)
•
•
Do not apply any stress to the LED package, particularly when heated.
Only bottom preheat is suggested & should not preheat on top in order to reduce thermal stress experienced by the
LEDs.
•
•
The LEDs must not be re used once they have been extracted from PCB.
After soldering the LEDs, the package should be protected from mechanical shock or vibration until the LEDs have
reached 40 ºC or below.
•
•
•
Precautions must be taken as mechanical stress on the LEDs may be caused by PCB warpage or from the clinching
and cutting of the LED leads.
When it is necessary to clam the LEDs during soldering, it is important to ensure no mechanical stress is exerted on
the LEDs.
Cut the LED lead at normal room temperature. Lead cutting at high temperature may cause failure of the LEDs.
Refer to "http://www.cree.com/led-components/media/documents/sh-HB.pdf" for soldering & handling details.
Copyright © 2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
9
Cree 4-mm Oval LED
C4SMA-RGY/GGY/BGY
PACKAGING
Features:
•
•
•
•
•
The LEDs are packed in cardboard boxes after packaging in normal or anti-electrostatic bags.
Cardboard boxes will be used to protect the LEDs from mechanical shock during transportation.
The boxes are not water resistant, and they must be kept away from water and moisture.
The Bulk Pack types of packaging.
Max 1000 pcs per bulk and Max 3000 pcs per ammo.
Bulk Pack Packaging Type:
Ammo Pack Packaging Type:
xxx xxx
A
XXXXXXXXXXX
Label
(anti-electrostatic bag)
10 bags/carton
Copyright © 2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
10
相关型号:
©2020 ICPDF网 联系我们和版权申明