CLD-DS56 [CREE]
Cree® XLamp® XP-E2 LEDs; Cree® XLamp® XP -E2 LED灯
| 型号： | CLD-DS56 |
| 厂家： | 
CREE, INC |
| 描述： | Cree® XLamp® XP-E2 LEDs |
| 文件： | 总17页 (文件大小：1857K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Product family data sheet
cꢀꢁꢁ® Xlꢂꢃp® XP-e2 ledꢄ
Product descriPtion
features
table of contents
The XLamp XP-ꢀ2 LꢀD builds on the
unprecedented performance of the
original XP-ꢀ by increasing lumen
output up to 20% while providing
a single die LꢀD point source for
precise optical control. The XP-ꢀ2
LꢀD shares the same footprint
as the original XP-ꢀ, providing a
seamless upgrade path to more
lumens and/or greater efficiency
while shortening the design cycle
for existing XP customers.
• Available in white, outdoor
white, 80-CRI, 85-CRI, 90-CRI
white, royal blue, blue, green,
amber, red-orange & red
• ANSI-compatible chromaticity
bins
Characteristics .......................... 2
Flux Characteristics - White ........ 3
Flux Characteristics - Color ......... 4
Relative Spectral Power
Distribution............................... 6
Relative Flux vs. Junction
• White binned at 85 °C
• Maximum drive current: 1 A
• Low thermal resistance: as low
as 5 °C/W
Temperature............................. 7
ꢀlectrical Characteristics............. 8
Relative Flux vs. Current ............ 9
Relative Chromaticity vs. Current
and Temperature......................10
Typical Spatial Distribution.........11
Thermal Design........................12
Reflow Soldering Characteristics .13
Notes......................................14
Mechanical Dimensions..............15
Tape and Reel ..........................16
Packaging................................17
• Wide viewing angle: 110°-135°
• Unlimited floor life at
≤ 30 °C/85% RH
XLamp XP-ꢀ2 LꢀDs are the ideal
choice for lighting applications
where high light output and
maximum efficacy are required,
such as LED retrofit lamps, outdoor,
• Reflow solderable - JEDEC
J-STD-020C compatible
• ꢀlectrically neutral thermal path
• UL-recognized component
(ꢀ349212)
portable,
indoor
directional,
emergency vehicle or architectural.
Cree, Inc.
4600 Silicon Drive
Copyright © 2012-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without
notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc.
Durham, NC 27703
USA Tel: +1.919.313.5300
xlamp xp-e2 leds
characteristics
cꢅꢂꢀꢂꢆꢇꢁꢀꢈꢄꢇꢈꢆꢄ
uꢉꢈꢇ
mꢈꢉꢈꢃꢊꢃ
tꢋpꢈꢆꢂꢌ
mꢂxꢈꢃꢊꢃ
Thermal resistance, junction to solder point - white, royal blue, blue
Thermal resistance, junction to solder point - green
Thermal resistance, junction to solder point - amber
Thermal resistance, junction to solder point - red-orange, red
Viewing angle (FWHM) - white
°C/W
°C/W
9
15
°C/W
7
°C/W
5
degrees
degrees
degrees
mꢁ/°C
mꢁ/°C
mꢁ/°C
mꢁ/°C
110
135
130
-2.3
-3.3
-3.8
-1.8
Class 2
Viewing angle (FWHM) - royal blue, blue, green
Viewing angle (FWHM) - amber, red-orange, red
Temperature coefficient of voltage - white
Temperature coefficient of voltage - royal blue, blue
Temperature coefficient of voltage - green
Temperature coefficient of voltage - amber, red-orange, red
ESD classification (HBM per Mil-Std-883D)
DC forward current
mA
ꢁ
1000
5
Reverse voltage
Forward voltage (@ 350 mA, 85 °C) - white
Forward voltage (@ 700 mA, 85 °C) - white
Forward voltage (@ 1000 mA, 85 °C) - white
Forward voltage (@ 350 mA, 25 °C) - royal blue, blue
Forward voltage (@ 350 mA, 25 °C) - green
Forward voltage (@ 350 mA, 25 °C) - amber, red-orange, red
Forward voltage (@ 1000 mA, 25 °C) - royal blue, blue
Forward voltage (@ 1000 mA, 25 °C) - green
Forward voltage (@ 1000 mA, 25 °C) - amber, red-orange, red
LꢀD junction temperature
ꢁ
2.9
3.05
3.15
3.1
3.25
ꢁ
ꢁ
3.5
3.6
2.6
3.2
ꢁ
2.2
ꢁ
3.4
ꢁ
3.7
ꢁ
2.65
°C
150
Copyright © 2012-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered
trademarks of Cree, Inc.
2
xlamp xp-e2 leds
fluX characteristics (tJ = 85 °c) - White
The following table provides several base order codes for XLamp XP-ꢀ2 LꢀDs. It is important to note that the base order
codes listed here are a subset of the total available order codes for the product family. For more order codes, as well
as a complete description of the order-code nomenclature, please consult the XLamp XP Family Binning and Labeling
document.
bꢂꢄꢁ oꢀꢎꢁꢀ cꢍꢎꢁꢄ
mꢈꢉ. lꢊꢃꢈꢉꢍꢊꢄ fꢌꢊx (ꢌꢃ)
@ 350 ꢃa
cꢂꢌꢆꢊꢌꢂꢇꢁꢎ mꢈꢉꢈꢃꢊꢃ
lꢊꢃꢈꢉꢍꢊꢄ fꢌꢊx (ꢌꢃ)**
@ 85 °c
cct rꢂꢉgꢁ
cꢍꢌꢍꢀ
oꢀꢎꢁꢀ cꢍꢎꢁ
fꢌꢊx (ꢌꢃ)
@ 85 °c
fꢌꢊx (ꢌꢃ)
@ 25 °c*
mꢈꢉ.
mꢂx.
Gꢀꢍꢊp
700 ꢃa
1.0 a
Q4
Q5
R2
R3
Q4
Q5
R2
R3
Q4
Q5
R2
Q2
Q3
Q2
Q3
Q4
P2
P3
P4
Q2
P2
P3
P4
100
107
114
122
100
107
114
122
100
107
114
87.4
93.9
87.4
93.9
100
67.2
73.9
80.6
87.4
67.2
73.9
80.6
116
171
183
195
209
171
183
195
209
171
183
195
150
161
150
161
171
115
127
138
150
115
127
138
218
233
249
266
218
233
249
266
218
233
249
191
205
191
205
218
147
161
176
191
147
161
176
XPEBWT-L1-0000-00C51
XPEBWT-L1-0000-00D51
XPEBWT-L1-0000-00E51
XPEBWT-L1-0000-00F51
XPEBWT-01-0000-00CC2
XPEBWT-01-0000-00DC2
XPEBWT-01-0000-00EC2
XPEBWT-01-0000-00FC2
XPEBWT-L1-0000-00CE4
XPEBWT-L1-0000-00DE4
XPEBWT-L1-0000-00EE4
XPEBWT-H1-0000-00AE7
XPEBWT-H1-0000-00BE7
XPEBWT-L1-0000-00AE7
XPEBWT-L1-0000-00BE7
XPEBWT-L1-0000-00CE7
XPEBWT-P1-0000-007E7
XPEBWT-P1-0000-008E7
XPEBWT-P1-0000-009E7
XPEBWT-P1-0000-00AE7
XPEBWT-U1-0000-007E7
XPEBWT-U1-0000-008E7
XPEBWT-U1-0000-009E7
124
132
142
116
124
132
142
116
124
132
101
109
101
109
116
78.0
85.7
93.5
101
78.0
85.7
93.5
Cool White
5000 K
4000 K
10,000 K
ꢂutdoor
White
5300 K
Neutral
White
3700 K
2600 K
2600 K
5300 K
4300 K
3700 K
80-CRI
White
Warm
White
85-CRI
White
2600 K
2600 K
3200 K
3200 K
90-CRI
White
Notes:
•
Cree maintains a tolerance of ± 7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2
on CRI measurements.
•
•
•
•
•
•
•
*
Typical CRI for Cool White (5000 K – 10,000 K CCT) is 70.
Typical CRI for Neutral White (3700 K – 5300 K CCT) is 75.
Typical CRI for ꢂutdoor White (4000 K - 5300 K CCT) is 70.
Typical CRI for Warm White (2600 K – 3700 K CCT) is 80.
Minimum CRI for 80-CRI White is 80.
Minimum CRI for 85-CRI White is 85.
Minimum CRI for 90-CRI White is 90.
Flux values @ 25 °C are calculated and for reference only.
** Calculated flux values at 700 mA and 1 A are for reference only.
Copyright © 2012-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered
trademarks of Cree, Inc.
3
xlamp xp-e2 leds
fluX characteristics (tJ = 25 °c) - color
The following table provides several base order codes for XLamp XP-ꢀ2 color LꢀDs. It is important to note that the base
order codes listed here are a subset of the total available order codes for the product family. For more order codes,
as well as a complete description of the order-code nomenclature, please consult the XLamp XP Family Binning and
Labeling document.
mꢈꢉꢈꢃꢊꢃ
rꢂꢎꢈꢂꢉꢇ fꢌꢊx @
350 ꢃa
dꢍꢃꢈꢉꢂꢉꢇ Wꢂvꢁꢌꢁꢉgꢇꢅ rꢂꢉgꢁ
mꢈꢉ. mꢂx.
cꢍꢌꢍꢀ
oꢀꢎꢁꢀ cꢍꢎꢁꢄ,
fꢌꢊx
Gꢀꢍꢊp
dWl
dWl
(ꢉꢃ)
(ꢃW)
Gꢀꢍꢊp
Gꢀꢍꢊp
(ꢉꢃ)
30
31
32
33
34
35
450
475
500
525
550
575
D3
D3
D3
D3
D3
D3
450
450
450
450
450
450
D5
D5
D5
D5
D5
D5
465
XPEBRY-L1-0000-00J01
XPEBRY-L1-0000-00K01
XPEBRY-L1-0000-00L01
XPEBRY-L1-0000-00M01
XPEBRY-L1-0000-00N01
XPEBRY-L1-0000-00P01
455
455
455
455
465
Royal
Blue
bꢂꢄꢁ oꢀꢎꢁꢀ
dꢍꢃꢈꢉꢂꢉꢇ Wꢂvꢁꢌꢁꢉgꢇꢅ rꢂꢉgꢁ
mꢈꢉ. mꢂx.
cꢍꢎꢁꢄ mꢈꢉ.
lꢊꢃꢈꢉꢍꢊꢄ fꢌꢊx
(ꢌꢃ) @ 350 ꢃa
cꢍꢌꢍꢀ
oꢀꢎꢁꢀ cꢍꢎꢁ
dWl
(ꢉꢃ)
dWl
(ꢉꢃ)
fꢌꢊx
Gꢀꢍꢊp
Gꢀꢍꢊp
Gꢀꢍꢊp
(ꢌꢃ)
K2
K3
M2
M3
30.6
35.2
39.8
45.7
XPEBBL-L1-0000-00Y01
XPEBBL-L1-0000-00Z01
XPEBBL-L1-0000-00201
XPEBBL-L1-0000-00301
Blue
B3
465
B6
485
bꢂꢄꢁ oꢀꢎꢁꢀ
cꢍꢎꢁꢄ mꢈꢉ.
lꢊꢃꢈꢉꢍꢊꢄ fꢌꢊx
(ꢌꢃ) @ 350 ꢃa
dꢍꢃꢈꢉꢂꢉꢇ Wꢂvꢁꢌꢁꢉgꢇꢅ rꢂꢉgꢁ
mꢈꢉ. mꢂx.
cꢍꢌꢍꢀ
oꢀꢎꢁꢀ cꢍꢎꢁ
dWl
(ꢉꢃ)
dWl
(ꢉꢃ)
fꢌꢊx
Gꢀꢍꢊp
Gꢀꢍꢊp
Gꢀꢍꢊp
(ꢌꢃ)
Q2
Q3
Q4
Q5
R2
R3
87.4
93.9
100
107
114
122
XPEBGR-L1-0000-00A01
XPEBGR-L1-0000-00B01
XPEBGR-L1-0000-00C01
XPEBGR-L1-0000-00D01
XPEBGR-L1-0000-00E01
XPEBGR-L1-0000-00F01
Green
G2
520
G4
535
Note: Cree maintains a tolerance of ± 7% on flux and power measurements and ± 1 nm on dominant wavelength
measurements.
Copyright © 2012-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered
trademarks of Cree, Inc.
4
xlamp xp-e2 leds
fluX characteristics (tJ = 25 °c) - color (continued)
bꢂꢄꢁ oꢀꢎꢁꢀ
cꢍꢎꢁꢄ mꢈꢉ.
lꢊꢃꢈꢉꢍꢊꢄ fꢌꢊx
(ꢌꢃ) @ 350 ꢃa
dꢍꢃꢈꢉꢂꢉꢇ Wꢂvꢁꢌꢁꢉgꢇꢅ rꢂꢉgꢁ
mꢈꢉ. mꢂx.
cꢍꢌꢍꢀ
oꢀꢎꢁꢀ cꢍꢎꢁ
dWl
(ꢉꢃ)
dWl
(ꢉꢃ)
fꢌꢊx
Gꢀꢍꢊp
Gꢀꢍꢊp
Gꢀꢍꢊp
(ꢌꢃ)
N4
P2
P3
P4
62.0
67.2
73.9
80.6
XPEBAM-L1-0000-00601
XPEBAM-L1-0000-00701
XPEBAM-L1-0000-00801
XPEBAM-L1-0000-00901
Amber
A2
585
A3
595
bꢂꢄꢁ oꢀꢎꢁꢀ
cꢍꢎꢁꢄ mꢈꢉ.
lꢊꢃꢈꢉꢍꢊꢄ fꢌꢊx
(ꢌꢃ) @ 350 ꢃa
dꢍꢃꢈꢉꢂꢉꢇ Wꢂvꢁꢌꢁꢉgꢇꢅ rꢂꢉgꢁ
mꢈꢉ. mꢂx.
cꢍꢌꢍꢀ
oꢀꢎꢁꢀ cꢍꢎꢁ
dWl
(ꢉꢃ)
dWl
(ꢉꢃ)
fꢌꢊx
Gꢀꢍꢊp
Gꢀꢍꢊp
Gꢀꢍꢊp
(ꢌꢃ)
P2
P3
P4
Q2
Q3
67.2
73.9
80.6
87.4
93.9
XPEBRO-L1-0000-00701
XPEBRO-L1-0000-00801
XPEBRO-L1-0000-00901
XPEBRO-L1-0000-00A01
XPEBRO-L1-0000-00B01
Red-
ꢂrange
ꢂ3
610
ꢂ4
620
bꢂꢄꢁ oꢀꢎꢁꢀ
cꢍꢎꢁꢄ mꢈꢉ.
lꢊꢃꢈꢉꢍꢊꢄ fꢌꢊx
(ꢌꢃ) @ 350 ꢃa
dꢍꢃꢈꢉꢂꢉꢇ Wꢂvꢁꢌꢁꢉgꢇꢅ rꢂꢉgꢁ
mꢈꢉ. mꢂx.
cꢍꢌꢍꢀ
oꢀꢎꢁꢀ cꢍꢎꢁ
dWl
(ꢉꢃ)
dWl
(ꢉꢃ)
fꢌꢊx
Gꢀꢍꢊp
Gꢀꢍꢊp
Gꢀꢍꢊp
(ꢌꢃ)
N3
N4
P2
P3
56.8
62.0
67.2
73.9
XPEBRD-L1-0000-00501
XPEBRD-L1-0000-00601
XPEBRD-L1-0000-00701
XPEBRD-L1-0000-00801
Red
R2
620
R3
630
Note: Cree maintains a tolerance of ± 7% on flux and power measurements and ± 1 nm on dominant wavelength
measurements.
Copyright © 2012-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered
trademarks of Cree, Inc.
5
xlamp xp-e2 leds
relatiꢏe sPectral PoWer distribution
100
90
80
70
60
50
40
30
20
10
0
Cool White
Warm White
380
430
480
530
580
630
680
730
780
Wavelength (nm)
100
80
60
40
20
0
Royal Blue
Blue
Green
Amber
Red-Orange
Red
380
430
480
530
580
630
680
730
780
Wavelength (nm)
Copyright © 2012-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered
trademarks of Cree, Inc.
6
xlamp xp-e2 leds
relatiꢏe fluX ꢏs. Junction temPerature (if = 350 ꢃa)
120
100
80
60
40
20
0
White
25
50
75
100
125
150
Junction Temperature (ºC)
100
90
80
70
60
50
40
30
20
10
0
Royal Blue
25
50
75
100
125
150
Junction Temperature (ºC)
100
90
80
70
60
50
40
30
20
10
0
Blue
Green
Amber
Red-Orange, Red
25
50
75
100
125
150
Junction Temperature (ºC)
Copyright © 2012-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered
trademarks of Cree, Inc.
7
xlamp xp-e2 leds
electrical characteristics (tJ = 85 °c)
1000
900
800
700
600
500
400
300
200
100
0
White
2.7
2.8
2.9
3.0
3.1
3.2
Forward Voltage (V)
electrical characteristics (tJ = 25 °c)
1000
900
800
700
600
500
400
300
200
100
0
Royal Blue, Blue
Green
Amber, Red-Orange, Red
2.00
2.25
2.50
2.75
3.00
3.25
3.50
3.75
4.00
Forward Voltage (V)
Copyright © 2012-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered
trademarks of Cree, Inc.
8
xlamp xp-e2 leds
relatiꢏe fluX ꢏs. current (tJ = 85 °c)
250
200
150
100
50
White
0
0
100
200
300
400
500
600
700
800
900
1000
Forward Current (mA)
relatiꢏe fluX ꢏs. current (tJ = 25 °c)
250
200
150
100
50
Royal Blue
0
0
100
200
300
400
500
600
700
800
900
1000
Forward Current (mA)
300
250
200
150
100
50
Blue
Green
Amber
Red-Orange, Red
0
0
100
200
300
400
500
600
700
800
900
1000
Forward Current (mA)
Copyright © 2012-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered
trademarks of Cree, Inc.
9
xlamp xp-e2 leds
relatiꢏe chromaticity ꢏs. current and temPerature - Warm White*
0.020
T
= 85 °C
J
0.015
0.010
0.005
0.000
-0.005
-0.010
-0.015
-0.020
ΔCCx
ΔCCy
0
100
200
300
400
500
600
700
800
900
1000
Current (mA)
0.020
0.015
0.010
0.005
0.000
-0.005
-0.010
-0.015
-0.020
I
= 350 mA
F
ΔCCx
ΔCCy
0
20
40
60
80
100
120
140
160
Tsp (°C)
* Warm White XLamp XP-ꢀ2 LꢀDs have a typical CRI of 80.
Copyright © 2012-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered
trademarks of Cree, Inc.
10
xlamp xp-e2 leds
tyPical sPatial distribution
100
80
60
White
40
20
0
-90
-70
-50
-30
-10
10
30
50
70
90
Angle (°)
100
80
60
40
20
0
Royal Blue, Blue, Green
Amber, Red-Orange, Red
-90
-70
-50
-30
-10
10
30
50
70
90
Angle (º)
Copyright © 2012-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered
trademarks of Cree, Inc.
11
xlamp xp-e2 leds
thermal desiGn
The maximum forward current is determined by the thermal resistance between the LꢀD junction and ambient. It is
crucial for the end product to be designed in a manner that minimizes the thermal resistance from the solder point to
ambient in order to optimize lamp life and optical characteristics.
Wꢅꢈꢇꢁ
rꢍꢋꢂꢌ bꢌꢊꢁ, bꢌꢊꢁ
1200
1200
1000
800
1000
800
600
600
Rj-a = 10°C/W
Rj-a = 10°C/W
Rj-a = 15°C/W
Rj-a = 20°C/W
Rj-a = 15°C/W
Rj-a = 20°C/W
Rj-a = 25°C/W
400
200
0
400
Rj-a = 25°C/W
200
0
0
20
40
60
80
100
120
140
0
20
40
60
80
100
120
140
Ambient Temperature (ºC)
Ambient Temperature (ºC)
Gꢀꢁꢁꢉ
aꢃꢐꢁꢀ, rꢁꢎ-oꢀꢂꢉgꢁ, rꢁꢎ
1200
1200
1000
800
600
400
200
1000
800
600
Rj-a = 10°C/W
Rj-a = 15°C/W
Rj-a = 20°C/W
Rj-a = 20°C/W
Rj-a = 25°C/W
Rj-a = 30°C/W
Rj-a = 35°C/W
400
Rj-a = 25°C/W
200
0
0
0
0
20
40
60
80
100
120
140
20
40
60
80
100
120
140
Ambient Temperature (ºC)
Ambient Temperature (ºC)
Copyright © 2012-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered
trademarks of Cree, Inc.
12
xlamp xp-e2 leds
refloW solderinG characteristics
In testing, Cree has found XLamp XP-E2 LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed
below. As a general guideline, Cree recommends that users follow the recommended soldering profile provided by the
manufacturer of solder paste used.
Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment.
Profile Feature
lꢁꢂꢎ-bꢂꢄꢁꢎ sꢍꢌꢎꢁꢀ
lꢁꢂꢎ-fꢀꢁꢁ sꢍꢌꢎꢁꢀ
Average Ramp-Up Rate (Tsmax to Tp)
3 °C/second max.
100 °C
3 °C/second max.
150 °C
Preheat: Temperature Min (Tsmin
Preheat: Temperature Max (Tsmax
Preheat: Time (tsmin to tsmax
)
)
150 °C
60-120 seconds
183 °C
200 °C
60-180 seconds
217 °C
)
Time Maintained Above: Temperature (TL)
Time Maintained Above: Time (tL)
60-150 seconds
60-150 seconds
Peak/Classification Temperature (Tp)
215 °C
260 °C
Time Within 5 °C of Actual Peak Temperature (tp)
Ramp-Down Rate
10-30 seconds
6 °C/second max.
6 minutes max.
20-40 seconds
6 °C/second max.
8 minutes max.
Time 25 °C to Peak Temperature
Note: All temperatures refer to topside of the package, measured on the package body surface.
Copyright © 2012-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered
trademarks of Cree, Inc.
13
xlamp xp-e2 leds
notes
lꢊꢃꢁꢉ mꢂꢈꢉꢇꢁꢉꢂꢉꢆꢁ Pꢀꢍjꢁꢆꢇꢈꢍꢉꢄ
Cree now uses standardized IꢀS LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LꢀD
lumen maintenance. For information on the specific LM-80 data sets available for this LED, refer to the public LM-80
results document at www.cree.com/xlamp_app_notes/LM80_results.
Please read the XLamp Long-Term Lumen Maintenance application note at www.cree.com/xlamp_app_notes/lumen_
maintenance for more details on Cree’s lumen maintenance testing and forecasting. Please read the XLamp Thermal
Management application note at www.cree.com/xlamp_app_notes/thermal_management for details on how thermal
design, ambient temperature, and drive current affect the LꢀD junction temperature.
mꢍꢈꢄꢇꢊꢀꢁ sꢁꢉꢄꢈꢇꢈvꢈꢇꢋ
In testing, Cree has found XLamp XP-E2 LEDs to have unlimited floor life in conditions ≤ 30 ºC/85% relative humidity
(RH). Moisture testing included a 168-hour soak at 85 ºC/85% RH followed by 3 reflow cycles, with visual and electrical
inspections at each stage.
Cree recommends keeping XLamp LꢀDs in their sealed moisture-barrier packaging until immediately prior to use. Cree
also recommends returning any unused LꢀDS to the resealable moisture-barrier bag and closing the bag immediately
after use.
ul rꢁꢆꢍgꢉꢈzꢁꢎ cꢍꢃpꢍꢉꢁꢉꢇ
Level 4 enclosure consideration. The LED package or a portion thereof has been investigated as a fire and electrical
enclosure per ANSI/UL 8750.
ꢏꢈꢄꢈꢍꢉ aꢎvꢈꢄꢍꢀꢋ cꢌꢂꢈꢃ
WARNING: Do not look at exposed lamp in operation. ꢀye injury can result. See LꢀD ꢀye Safety at www.cree.com/
xlamp_app_notes/led_eye_safety.
Copyright © 2012-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered
trademarks of Cree, Inc.
14
xlamp xp-e2 leds
mechanical dimensions
All measurements are ±.13 mm unless otherwise indicated.
Anode
2.36
3.30
2.30
3.45
.50
.83
3.30
3.45
R1.53
Anode
.65
1.30
sꢈꢎꢁ ꢏꢈꢁw
bꢍꢇꢇꢍꢃ ꢏꢈꢁw
tꢍp ꢏꢈꢁw
1.15
.65
.50
.60
1.20
.60
.50
.40
3.30
3.20
1.60
.40
1.65
.40
.40
1.30
3.30
3.20
.50
rꢁꢆꢍꢃꢃꢁꢉꢎꢁꢎ Pcb sꢍꢌꢎꢁꢀ Pꢂꢎ
rꢁꢆꢍꢃꢃꢁꢉꢎꢁꢎ sꢇꢁꢉꢆꢈꢌ Pꢂꢇꢇꢁꢀꢉ
hꢂꢇꢆꢅꢁꢎ aꢀꢁꢂ ꢈꢄ opꢁꢉꢈꢉg
Copyright © 2012-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered
trademarks of Cree, Inc.
15
xlamp xp-e2 leds
taPe and reel
All Cree carrier tapes conform to EIA-481D, Automated Component Handling Systems Standard.
All dimensions in mm.
P2
Po
1.55
T
0.30 0.05
2.0 0.05 (I)
4.0 0.1 (II)
Do
0.05
Y
CATHODE SIDE
Ao
3.70
+/- 0.1
Bo
Ko
F
3.70
2.40
5.50
+/- 0.1
+0.0/-0.1
+/- 0.05
F(III)
8.00
P
+/- 0.1
W
1
REF
4.375
W
12.00
+0.3/-0.1
Bo
X
X
(I)
Measured from centerline of sprocket hole
to centerline of pocket.
R0.2
TYPICAL
(II)
(III)
(IV)
Cumulative tolerance of 10 sprocket
holes is 0.20.
ANꢂDꢀ SIDꢀ
Y
Ko
Measured from centerline of sprocket
hole to centerline of pocket.
Other material available.
P1
Ao
D1
1.5 MIN.
SECTION Y-Y
REF 0.59
SECTION X-X
END
START
Loaded Pockets
(1,000 Lamps)
Trailer
Leader
400mm (min) of
empty pockets with
at least 100mm
160mm (min) of
empty pockets
sealed with tape
(20 pockets min.)
sealed by tape
(50 empty pockets min.)
16.40
190
61 +/-
0.5
+
0
2.00
12.40
MEASURED AT HUB
13
12.40
MEASURED AT INSIDE EDGE
Copyright © 2012-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered
trademarks of Cree, Inc.
16
xlamp xp-e2 leds
PackaGinG
Unpackaged Reel
Label with Cree Bin
Code, Qty, Reel ID
Packaged Reel
Label with Cree Order Code,
Qty, Reel ID, PO #
Label with Cree Bin
Code, Qty, Reel ID
Boxed Reel
Label with Cree Order Code,
Qty, Reel ID, PO #
Label with Cree Bin
Code, Qty, Reel ID
Patent Label
(on bottom of box)
Copyright © 2012-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered
trademarks of Cree, Inc.
17
相关型号：
©2020 ICPDF网 联系我们和版权申明