CLMUD-DXW-XHHJJKKLLMMNN4 [CREE]
Cree® PLCC4 3 in 1 RGB SMD LED;型号: | CLMUD-DXW-XHHJJKKLLMMNN4 |
厂家: | CREE, INC |
描述: | Cree® PLCC4 3 in 1 RGB SMD LED |
文件: | 总11页 (文件大小:1258K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
PRODUCT FAMILY DATA SHEET
®
Cree PLCC4 3 in 1 RGB SMD LED
CLMUD-FKA
PRODUCT DESCRIPTION
FEATURES
APPLICATIONS
• Size (mm):1.5x 1.5
• Full-Color Video Screen
The CLMUD-FKA full-color RGB LED
offers a high-intensity light output and
a wide viewing angle. The compact
1.5mm x 1.5mm package allows for
a very high resolution screen and is
designed to work in a wide array of
environmental conditions. Cree PLCC
full-color RGB LEDs are suited for
indoor video screen, decorative lighting
and amusement applications.
• Dominant Wavelength:
Red (619 - 624nm)
Green (520 - 535nm)
Blue (465 - 475nm)
• Decorative lighting
• Amusement
• Luminous Intensity (mcd)
Red (36 - 81)@ 5mA
Green (126 - 252)@ 5mA
Blue (22 - 45)@ 5mA
• Moisture Sensitivity Level: 5a
• Lead-Free
• RoHS Compliant
• Matte Surface
Copyright © 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
the Cree logo are registered trademarks of Cree, Inc.
USA Tel: +1.919.313.5300
Cree PLCC4 3 in 1 SMD RGB LED
CLMUD-FKA
ABSOLUTE MAXIMUM RATINGS (TA = 25°C)
Absolute Maximum Rating
Items
Symbol
Unit
R
25
70
5
G
B
Note 1
Forward Current
IF
13
13
50
5
mA
mA
V
Note 2
Peak Forward Current
Reverse Voltage
IFP
VR
PD
50
5
Power Dissipation
60
50
50
mW
°C
Operation Temperature
Storage Temperature
T
-40 ~ +85
-40 ~ +100
110
opr
Tstg
TJ
°C
Junction Temperature
110
460
250
110
410
250
°C
Junction/ambient 1 chip on
Junction/solder point 1 chip on
RTHJA
RTHJS
430
°C/W
°C/W
270
Note: 1.Single-color light.
2.Pulse width ≤0.1 msec, duty ≤1/10.
TYPICAL ELECTRICAL & OPTICAL CHARACTERISTICS (TA = 25°C)
Values
G
Characteristics
Condition
Symbol
Unit
R
B
Dominant Wavelength
IF = 5 mA
IF = 5 mA
λDOM
619~624
520~535
465~475
nm
Spectral bandwidth at 50% IREL max
Δ λ
16
28
19
nm
VF(avg)
1.9
2.8
2.9
V
Forward Voltage
IF = 5 mA
IF = 5 mA
VF(max)
IV(min)
IV(avg)
2.4
36
54
3.8
126
180
3.8
22
30
V
mcd
mcd
Luminous Intensity
Luminous Intensity(Reference)
Reverse Current (max)
IF = 20/10/10 mA
IV(avg)
IR
215
10
260
45
10
mcd
VR = 5 V
10
μA
Note: Continuous reverse voltage can cause LED damage.
Copyright © 2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
2
Cree PLCC4 3 in 1 SMD RGB LED
CLMUD-FKA
INTENSITY BIN LIMIT (IF = 5 mA)
Blue
Green
Red
Bin Code
Min.(mcd) Max.(mcd)
Bin Code
Min.(mcd) Max.(mcd)
Bin Code
Min.(mcd) Max.(mcd)
L6
22
25
28
32
36
28
32
36
41
45
78
D
126
140
160
180
202
160
180
202
224
252
L8
3g3f
L9
36
41
45
51
56
64
45
51
56
64
71
81
3m3k
L7
9a
E
3j3h
L8
3e3d
L
bc
3c3b
Tolerance of measurement of luminous intensity is ±10%.
COLOR BIN LIMIT (IF = 5 mA)
Blue
Green
Red
Bin Code
Min.(nm)
Max.(nm)
Bin Code
Min.(nm)
Max.(nm)
Bin Code
Min.(nm)
Max.(nm)
B4
B45
B5
465
467.5
470
470
472.5
475
G7
G23
G8
520
522.5
525
525
527.5
530
RB
619
624
G45
G9
527.5
530
532.5
535
Tolerance of measurement of dominant wavelength is ±1 nm.
Copyright © 2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
3
Cree PLCC4 3 in 1 SMD RGB LED
CLMUD-FKA
ORDER CODE TABLE*
Luminous Intensity (mcd)
Dominant Wavelength (nm)
Pack-
Kit Number
Color
Color
Bin
Min.
Color
Bin
Max.
(nm)
age
Min.
Max.
(nm)
Red
Green
Blue
36
126
22
81
252
45
RB
G7
B4
RB
619
520
465
619
RB
G9
B5
RB
624
535
475
624
Reel
Reel
Reel
Reel
Reel
Reel
CLMUD-FKA-CL83c3b78bcL6L8BB79453
CLMUD-FKA-CL81781L61BB7C4S3
Red
Any 1 Intensity bin from L8(36) - 3c3b(81)
Any 1 Intensity bin from 78(126) - bc(252)
Any 1 Intensity bin from L6(22) - L8(45)
Green
Blue
Any 1 hue bin from G7(520) - G9(535)
Any 1 hue bin from B4(465) - B5(475)
Notes:
1. The above kit numbers represent the order codes which include multiple intensity-bin and color-bin codes. Only one
intensity-bin code and one color-bin code will be shipped on each reel. Single intensity-bin code and single color-
bin code will be orderable in certain quantities.
2. For example, any 1 intensity-bin from 78 - bc means only 1 intensity-bin (78 or D or 9a or E or bc) will be
shipped by Cree.
3. For example, any 1 color-bin from G7 - G9 means only 1 color-bin (G7 or G23 or G8 or G45 or G9) will be shipped
by Cree.
4. Please refer to the “Cree LED Lamp Reliability Test Standards” document #1 for reliability test conditions.
5. Please refer to the “Cree LED Lamp Soldering & Handling” document#2 for information about how to use this LED
product safely.
#1: Refer to http://www.cree.com/led-components/media/documents/LED_Lamp_Reliability_Test_Standard.pdf
#2: Refer to http://www.cree.com/led-components/media/documents/sh-HB.pdf
Copyright © 2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
4
Cree PLCC4 3 in 1 SMD RGB LED
CLMUD-FKA
GRAPHS
The above data are collected from statistical figures that do not necessarily correspond to the actual
parameters of each single LED. Hence, these data will be changed without further notice.
Copyright © 2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
5
Cree PLCC4 3 in 1 SMD RGB LED
CLMUD-FKA
GRAPHS
The above data are collected from statistical figures that do not necessarily correspond to the actual
parameters of each single LED. Hence, these data will be changed without further notice.
Copyright © 2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
6
Cree PLCC4 3 in 1 SMD RGB LED
CLMUD-FKA
MECHANICAL DIMENSIONS
All dimensions are in mm.
1
2
4
3
1
1 COMMON ANODE
2 CATHODE FOR Red
3 CATHODE FOR Green
4 CATHODE FOR Blue
3
4
2
NOTES
RoHS Compliance
The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or other-
wise restricted materials in this product are below the maximum concentration values (also referred to as the threshold
limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/
EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as
amended through April 21, 2006.
Vision Advisory Claim
Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye.
Copyright © 2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
7
Cree PLCC4 3 in 1 SMD RGB LED
CLMUD-FKA
KIT NUMBER SYSTEM
Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and
brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED Lamp
Packaging Standard” document for more information about shipping and packaging options.
Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following man-
ner:
Copyright © 2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
8
Cree PLCC4 3 in 1 SMD RGB LED
CLMUD-FKA
REFLOW SOLDERING
•ꢀ The CLMUD-FKA is rated as a MSL 5a product.
•ꢀ After opening the sealed bag,the SMD LED must be stored under the condition<30ºC and<60%RH. Under these conditions,the
SMDꢀLEDsꢀmustꢀbeꢀusedꢀ(subjectꢀtoꢀreflow)ꢀwithinꢀ24ꢀhoursꢀafterꢀbagꢀopening,ꢀandꢀbakingꢀ24-hour/80ºC is required when
exceeding 24 hours.
•ꢀ Noteꢀthatꢀbakingꢀmustꢀonlyꢀbeꢀdoneꢀonce.ꢀ
•ꢀ Theꢀtemperatureꢀprofileꢀisꢀasꢀbelow.
Melting-point
Cooling
Pre-heat
Soak
Reflow
Time
Use only with CLMUD-FKA
Solder
Average ramp-up rate = 4ºC/s max
Preheat temperature = 150ºC ~200ºC
Preheat time = 120s max
Ramp-down rate = 6ºC/s max
Peak temperature = 235ºC max
Time within 5ºC of actual Peak Temperature = 10s max
Duration above 217ºC is 45s max
Refer to "http://www.cree.com/led-components/media/documents/sh-HB.pdf" for soldering & handling details.
Copyright © 2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
9
Cree PLCC4 3 in 1 SMD RGB LED
CLMUD-FKA
NOTES
•
•
The packaging sizes of these SMD products are very small and the resin is still soft after solidification. Users are
required to handle with care. Never touch the resin surface of SMD products.
To avoid damaging the product’s surface and interior device, it is recommended to choose a special nozzle to pick
up the SMD products during the process of SMT production. If handling is necessary, take special care when picking
up these products. The following method is necessary:
Copyright © 2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
10
Cree PLCC4 3 in 1 SMD RGB LED
CLMUD-FKA
PACKAGING
•
The CLMUD-FKA is rated as a MSL 5a product.
• The boxes are not water resistant and they must be kept away from water and moisture.
• The LEDs are packed in cardboard boxes after packaging in normal or anti-electrostatic bags.
• Cardboard boxes will be used to protect the LEDs from mechanical shocks during transportation.
• The reel pack is applied in SMD LED.
• Max 12800 pcs per reel.
AAvvooiidd eettaall
AAvvooiidd eettaall
CC
CC
CCoobbaalltt FFrreeee
CCoobbaalltt FFrreeee
Copyright © 2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
11
相关型号:
©2020 ICPDF网 联系我们和版权申明