CLX6F-AKB [CREE]
Cree® PLCC6 3 in 1 SMD LED;
| 型号： | CLX6F-AKB |
| 厂家： | 
CREE, INC |
| 描述： | Cree® PLCC6 3 in 1 SMD LED |
| 文件： | 总11页 (文件大小：1477K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
PRODUCT FAMILY DATA SHEET
®
Cree PLCC6 3 in 1 SMD LED
CLX6F-AKB
PRODUCT DESCRIPTION
FEATURES
APPLICATIONS
• Size (mm):3.5 x 3.4 x 2.8
• Architecture Lighting
These SMD LEDs are packaged in an
industry standard PLCC6 package.
These high reliability and high
brightness LEDs are designed to work
in a wide range of environmental
condition and are ideally suited for
use in illumination applications.
• Dominant Wavelength:
Amber (587.5 - 597.5nm)
• Channel Letter
• Backlight
• Luminous Intensity (mcd)
Amber (3550-7100)
• Water-Resistant (IPX8)*
• Moisture Sensitivity Level: 5a
• Lead-Free
Its wide viewing angle makes these
LEDs ideally suited for channel
letter, or general backlighting and
illumination applications. The flat top
emitting surface makes it easy for
these LEDs to mate with light pipes.
• RoHS Compliant
• Matte Surface
*:This part is tested under the condition of assembling it on a PCB with isolating the electrical path by silicone.
The leads area of the LED is not IPx8 rated and it’s required to insulate for moisture by customer in outdoor
application.
Copyright © 2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
the Cree logo are registered trademarks of Cree, Inc.
USA Tel: +1.919.313.5300
Cree PLCC6 3 in 1 SMD LED
CLX6F-AKB
ABSOLUTE MAXIMUM RATINGS (TA = 25°C)
Items
Symbol
Absolute Maximum Rating
Unit
mA
mA
V
Note 1
Forward Current
IF
3 x 70
3 x 200
5
Note 2
Peak Forward Current
Reverse Voltage
IFP
VR
PD
Power Dissipation
3 x 196
-40 ~ +85
-40 ~ +100
110
mW
°C
Operation Temperature
Storage Temperature
T
opr
Tstg
TJ
°C
Junction Temperature
°C
Junction/ambient 1 chip on
Junction/solder point 1 chip on
RTHJA
RTHJS
270
°C/W
°C/W
160
Electrostatic Discharge
Classification(MIL-STD-883E)
ESD
1000 V
Note: 1.Single-color light.
2.Pulse width ≤0.1 msec, duty ≤1/10.
TYPICAL ELECTRICAL & OPTICAL CHARACTERISTICS (TA = 25°C)
Characteristics
Condition
Symbol
Values
Unit
Dominant Wavelength
IF = 3 x 50 mA
IF = 3 x 50 mA
λDOM
587.5-597.5
nm
Spectral bandwidth at 50% IREL max
Δ λ
VF(avg)
VF(max)
IV(min)
IV(avg)
ΦV(avg)
IR
24
2.2
nm
V
Forward Voltage
IF = 3 x 50 mA
IF = 3 x 50 mA
2.8
V
3550
4700
14.1
10
mcd
mcd
lm
Luminous Intensity
Luminous Flux(Reference)
Reverse Current (max)
IF = 3 x 50 mA
VR = 5 V
μA
Note: Continuous reverse voltage can cause LED damage.
Copyright © 2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
2
Cree PLCC6 3 in 1 SMD LED
CLX6F-AKB
INTENSITY BIN LIMIT (IF = 3 X 50 mA)
Amber
Bin Code
Min.(mcd) Max.(mcd)
U
1f1g
V
3550
4025
4500
5020
5600
4500
5020
5600
6300
7100
1h1j
W
Tolerance of measurement of luminous intensity is ±10%.
COLOR BIN LIMIT (IF = 3 X 50 mA)
Amber
Bin Code
Min.(nm)
Max.(nm)
AF
AG
AH
587.5
590
592.5
595
592.5
597.5
Tolerance of measurement of dominant wavelength is ±1 nm.
Copyright © 2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
3
Cree PLCC6 3 in 1 SMD LED
CLX6F-AKB
ORDER CODE TABLE*
Luminous Intensity (mcd)
Dominant Wavelength (nm)
Kit Number
Color
Package
Color
Bin
Min.
Color
Bin
Max.
(nm)
Min.
3550
Max.
(nm)
CLX6F-AKB-CUWFH3
CLX6F-AKB-CU1FS3
Amber
Amber
7100
AF
587.5
AH
597.5
Reel
Reel
Any 1 Intensity bin from U(3550) - W(7100)
Any 1 hue bin from AF(587.5) - AH(597.5)
Notes:
1. The above kit numbers represent the order codes which include multiple intensity-bin and color-bin codes.Only one
intensity-bin code and one color-bin code will be shipped on each reel. Single intensity-bin code and single color-bin
code will be orderable in certain quantities. For example, intensity bin from U - W means intensity bin from (U or
1f1g or V or 1h1j or 1W) will be shipped by Cree. For example, FH means color bin AF&AG&AH will be shipped by Cree.
#1
2. Please refer to the “Cree LED Lamp Reliability Test Standards” document
3. Please refer to the “Cree LED Lamp Soldering & Handling” document
for reliability test conditions.
#2
for information about how to use this LED
product safely.
#1: Refer to http://www.cree.com/led-components/media/documents/LED_Lamp_Reliability_Test_Standard.pdf
#2: Refer to http://www.cree.com/led-components/media/documents/sh-HB.pdf
Copyright © 2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
4
Cree PLCC6 3 in 1 SMD LED
CLX6F-AKB
GRAPHS
The above data are collected from statistical figures that do not necessarily correspond to the actual
parameters of each single LED. Hence, these data will be changed without further notice.
Copyright © 2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
5
Cree PLCC6 3 in 1 SMD LED
CLX6F-AKB
GRAPHS
℃
℃
The above data are collected from statistical figures that do not necessarily correspond to the actual
parameters of each single LED. Hence, these data will be changed without further notice.
Copyright © 2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
6
Cree PLCC6 3 in 1 SMD LED
CLX6F-AKB
MECHANICAL DIMENSIONS
All dimensions are in mm.
（
（
（
）
）
）
（
（
（
）
）
）
NOTES
RoHS Compliance
The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or other-
wise restricted materials in this product are below the maximum concentration values (also referred to as the threshold
limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/
EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as
amended through April 21, 2006.
Vision Advisory Claim
Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye.
Copyright © 2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
7
Cree PLCC6 3 in 1 SMD LED
CLX6F-AKB
KIT NUMBER SYSTEM
Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and
brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED Lamp
Packaging Standard” document for more information about shipping and packaging options.
Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following man-
ner:
Copyright © 2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
8
Cree PLCC6 3 in 1 SMD LED
CLX6F-AKB
REFLOW SOLDERING
•ꢀ The CLX6F-AKB is rated as a MSL 5a product.
•ꢀ Theꢀrecommendedꢀfloorꢀlifeꢀoutꢀofꢀbagꢀisꢀ24hrs.ꢀ
•ꢀ Theꢀtemperatureꢀprofileꢀisꢀasꢀbelow.
Melting-point
Cooling
Pre-heat
Soak
Reflow
Time
Use only with CLX6F-AKB
Solder
Average ramp-up rate = 4ºC/s max
Preheat temperature = 150ºC ~200ºC
Preheat time = 120s max
Ramp-down rate = 6ºC/s max
Peak temperature = 250ºC max
Time within 5ºC of actual Peak Temperature = 10s max
Duration above 217ºC is 60s max
Referꢀtoꢀ"http://www.cree.com/led-components/media/documents/sh-HB.pdf"ꢀforꢀsolderingꢀ&ꢀhandlingꢀdetails.
Copyright © 2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
9
Cree PLCC6 3 in 1 SMD LED
CLX6F-AKB
NOTES
•
•
The packaging sizes of these SMD products are very small and the resin is still soft after solidification. Users are
required to handle with care. Never touch the resin surface of SMD products.
To avoid damaging the product’s surface and interior device, it is recommended to choose a special nozzle to pick
up the SMD products during the process of SMT production. If handling is necessary, take special care when picking
up these products. The following method is necessary:
Copyright © 2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
10
Cree PLCC6 3 in 1 SMD LED
CLX6F-AKB
PACKAGING
• The boxes are not water resistant and they must be kept away from water and moisture.
• The LEDs are packed in cardboard boxes after packaging in normal or anti-electrostatic bags.
• Cardboard boxes will be used to protect the LEDs from mechanical shocks during transportation.
• The reel pack is applied in SMD LED.
• Max 2800 pcs per reel.
Copyright © 2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
11
相关型号：
©2020 ICPDF网 联系我们和版权申明