CP42T-RKS [CREE]
Cree® P4 LED;型号: | CP42T-RKS |
厂家: | CREE, INC |
描述: | Cree® P4 LED |
文件: | 总8页 (文件大小:708K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
PRODUCT FAMILY DATA SHEET
Cree® P4 LED
CP42T-RKS
PRODUCT DESCRIPTION
FEATURES
APPLICATIONS
•ꢀ Size (mm): 7.6 x 7.6
•ꢀChannelꢀLetter
This revolutionary package design
allows the lighting designer to reduce
the number of LEDs required and
provide a more uniform and unique
illuminated appearance than with
other LED solutions.
•ꢀ Color and Typical Dominant
Wavelength:
•ꢀAmusement
Red (628nm)
•ꢀ Luminous Flux (mlm)
CP42T-RKS:
(3300-5500)
Thisꢀisꢀpossibleꢀthroughꢀtheꢀefficientꢀ
optical-package design and high-
currentꢀ capabilities.ꢀ Theꢀ low-profileꢀ
package can be easily coupled with
reflectorsꢀ orꢀ lensesꢀ toꢀ efficientlyꢀ
distribute light and provide the
desired lit appearance. This product
family employs green and blue LED
materials, which allows designers
to match the color of many lighting
applications such as vehicle signal
lamps and amusement lighting.
•ꢀ Lead - Free
•ꢀ RoHS Compliant
Copyright © 2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
the Cree logo are registered trademarks of Cree, Inc.
USA Tel: +1.919.313.5300
Cree P4 LED
CP42T-RKS
ABSOLUTE MAXIMUM RATINGS (TA = 25°C)
Items
Forward Current
Symbol
Absolute Maximum Rating
Unit
mA
mA
V
Note1
IF
70
Note2
Peak Forward Current
Reverse Voltage
IFP
VR
PD
200
5
Power Dissipation
220
mW
°C
Operation Temperature
Storage Temperature
T
-40 ~ +100
-40 ~ +100
opr
Tstg
Tsol
°C
Max. 260°C for 5 sec. max.
(3 mm from the base of the epoxy bulb)
Lead Soldering Temperature
Note:
1. A heat sink is recommended if the device is operated at ambient temperatures higher than 25°C.
2.ꢀPulseꢀwidthꢀ≤0.1ꢀmsec,ꢀdutyꢀ≤1/10.
TYPICAL ELECTRICAL & OPTICAL CHARACTERISTICS (TA = 25°C)
Characteristics
Forward Voltage
Symbol
Condition
IF = 70 mA
VR = 5 V
Unit
V
Minimum
Typical
Maximum
3.2
VF
IR
2.6
Reverse Current
μA
100
Dominant Wavelength
Luminous Flux
λD
Φv
IF = 70 mA
IF = 70 mA
IF = 70 mA
nm
mlm
deg
620
628
4000
120
637
3300
50% Power Angle
2θ½
Copyright © 2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
2
Cree P4 LED
CP42T-RKS
FLUX BIN LIMIT (IF = 70 mA)
Red
Bin Code
Min.(mlm) Max.(mlm)
J0
K0
L0
3300
3850
4400
3850
4400
5500
•ꢀToleranceꢀofꢀmeasurementꢀofꢀluminousꢀfluxꢀisꢀ±15%
COLOR BIN LIMIT (IF = 70 mA)
Red
Bin Code
Min.(nm)
Max.(nm)
RE
620
637
•ꢀToleranceꢀofꢀmeasurementꢀofꢀdominantꢀwavelengthꢀisꢀ±1ꢀnm
VF BIN LIMIT (IF = 70 mA)
Red
Bin Code
Min. (V)
Max. (V)
24
25
26
27
28
2.2
2.4
2.6
2.8
3.0
2.4
2.6
2.8
3.0
3.2
• ToleranceꢀofꢀmeasurementꢀofꢀVFꢀisꢀ±0.05V.
Copyright © 2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
3
Cree P4 LED
CP42T-RKS
ORDER CODE TABLE*
Luminous Flux (mlm)
Dominant Wavelength
Viewing
Angle
Color
Kit Number
Color
Bin
Min.
Color
Bin
Max.
(nm)
Min.
Max.
(nm)
Red
CP42T-RKS-CJ0L0EE4
120
3300
5500
RE
620
RE
637
Notes:
1.ꢀꢀTheꢀaboveꢀkitꢀnumbersꢀrepresentꢀorderꢀcodesꢀwhichꢀincludeꢀmultipleꢀflux-binꢀandꢀcolor-binꢀcodes.ꢀ
ꢀꢀꢀꢀꢀOnlyꢀoneꢀflux-binꢀcodeꢀandꢀoneꢀcolor-binꢀcodeꢀwillꢀbeꢀshippedꢀonꢀeachꢀreel.
ꢀꢀꢀꢀꢀAndꢀsingleꢀflux-binꢀcode,singleꢀcolorꢀbin-codesꢀwillꢀnotꢀbeꢀorderable.
2. Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions.
3. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED
product safely.
Copyright © 2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
4
Cree P4 LED
CP42T-RKS
GRAPHS
(RELATIVE LUMINOUS Flux)
IF (mA)
2.5
2.0
1.5
100.0
80.0
60.0
40.0
1.0
0.5
0.0
20.0
0.0
IF(mA)
VF(V)
2.8
1.8
0
20
60
40
80
100
2.0
2.2
2.4
2.6
FIG.2 RELATIVE LUMINOUS FLUX VS.
FORWARD CURRENT
FIG.1 FORWARD CURRENT VS.
FORWARD VOLTAGE.
(RELATIVE LUMINOUS INTENSITY)
-20
-10
-40
-30
-60
-50
Vr(V)
0
100%
80%
-10
-20
-30
-40
60%
40%
20%
0%
WL(nm)
800
-50
Ir(uA)
300
400
500
600 700
FIG.3 REVERSE CURRENT
VS. REVERSE VOLTAGE.
FIG.4 RELATIVE LUMINOUS INTENSITY VS.
WAVELENGTH.
50% Power Angle : 120
(RELATIVE LUMINOUS INTENSITY)
0
IF(mA)
100
1.0
80
60
40
0.5
20
0
Ta( C)
100
Angle
90
0
-90
40
20
60
80
60
-60
FIG.6 FAR FIELD PATTERN
-30
0
30
0
FIG.5 MAXIMUM FORWARD
DCCURRENT VS AMBIENT
TEMPERATURE (Tjmax=120 C)
Theꢀaboveꢀdataꢀareꢀcollectedꢀfromꢀstatisticalꢀfiguresꢀthatꢀdoꢀnotꢀnecessarilyꢀcorrespondꢀtoꢀtheꢀactual
parameters of each single LED. Hence, these data will be changed without further notice.
Copyright © 2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
5
Cree P4 LED
CP42T-RKS
MECHANICAL DIMENSIONS
Allꢀdimensionsꢀareꢀinꢀmm.ꢀToleranceꢀisꢀ±0.25ꢀmmꢀunlessꢀotherwiseꢀnoted.
An epoxy meniscus may extend about 1.5 mm down the leads.
Burr around bottom of epoxy may be 0.5 mm max.
NOTES
RoHS Compliance
The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or other-
wise restricted materials in this product are below the maximum concentration values (also referred to as the threshold
limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/
EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as
amended through April 21, 2006.
Vision Advisory Claim
Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye.
Copyright © 2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
6
Cree P4 LED
CP42T-RKS
KIT NUMBER SYSTEM
All dimensions in mm.CreeꢀLEDꢀlampsꢀareꢀtestedꢀandꢀsortedꢀintoꢀperformanceꢀbins.ꢀAꢀbinꢀisꢀspecifiedꢀbyꢀrangesꢀofꢀcolor,ꢀ
forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to
the “Cree LED Lamp Packaging Standard” document for more information about shipping and packaging options.
CreeꢀLEDsꢀareꢀsoldꢀbyꢀorderꢀcodesꢀinꢀcombinationsꢀofꢀbinsꢀcalledꢀkits.ꢀOrderꢀcodesꢀareꢀconfiguredꢀinꢀtheꢀfollowingꢀman-
ner:
Copyright © 2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
7
Cree P4 LED
CP42T-RKS
PACKAGING
Features:
•ꢀ The LEDs are packed in cardboard boxes after packaging in normal or anti-electrostatic bags.
•ꢀ Cardboard boxes will be used to protect the LEDs from mechanical shock during transportation.
•ꢀ The boxes are not water resistant, and they must be kept away from water and moisture.
•ꢀ The Tube Pack type of packaging.
•ꢀ Max 60 pcs per tube.
R
xxx xxx
R
COLOR LED LAMP
T
YPE
LXXXXXXXX-XXX
LOT
QT
J
OWAXXXXX -XX-XXX
CS
Y
P
R
A
N
K
I
v
X
V
f
XX
XX
Hu
e
AX XXX XXX XXX
X
Copyright © 2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
8
相关型号:
©2020 ICPDF网 联系我们和版权申明