LC503TPG1-15P-A1-00012 [CREE]

Visible LED;
LC503TPG1-15P-A1-00012
型号: LC503TPG1-15P-A1-00012
厂家: CREE, INC    CREE, INC
描述:

Visible LED

文件: 总5页 (文件大小:312K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
®
Cree 5-mm Round LED  
Model # LC503TPG1-15P-A1  
Data Sheet  
15-degree, 5-mm LED lamp in green color with water-transparent lens and stopper  
Applications  
•ꢀ Advertising Signs  
•ꢀ Indicators  
•ꢀ LCD Back Lights  
•ꢀ Moving-Message Signs  
Absolute Maximum Ratings (TA = 25°C)  
Items  
Symbol  
Absolute Maximum Rating  
Unit  
mA  
mA  
V
Forward Current  
Peak Forward Current  
Reverse Voltage  
Power Dissipation  
IF  
25  
100  
Note  
IFP  
VR  
PD  
5
100  
mW  
°C  
Operation Temperature  
Storage Temperature  
T
-40 ~ +95  
-40 ~ +100  
opr  
Tstg  
Tsol  
°C  
Max. 260°C for 3 sec. max.  
(3 mm from the base of the epoxy bulb)  
Lead Soldering Temperature  
Note: Pulseꢀwidthꢀ≤0.1ꢀmsec,ꢀdutyꢀ≤1/10.  
Typical Electrical & Optical Characteristics (TA = 25°C)  
Characteristics  
Forward Voltage  
Forward Voltage  
Reverse Current  
Dominant Wavelength  
Luminous Intensity  
50% Power Angle  
Symbol  
Condition  
IF = 20 mA  
IF = 1.0 µA  
VR = 5 V  
Unit  
V
Minimum  
Typical  
Maximum  
4.0  
VF  
3.4  
VF  
V
1.7  
2.5  
IR  
λD  
μA  
100  
IF = 20 mA  
IF = 20 mA  
IF = 20 mA  
nm  
mcd  
deg  
520  
527  
23000  
15  
535  
IV  
12000  
2θ½H-H  
Subject to change without notice.  
www.cree.com/ledlamps  
1
Standard Bins for LC503TPG1-15P-A1 (IF = 20 mA)  
Lamps are sorted to luminous intensity (IV)ꢀandꢀdominantꢀwavelengthꢀ(λD) bins shown.  
OrdersꢀforꢀLC503TPG1-15P-A1ꢀmayꢀbeꢀfilledꢀwithꢀanyꢀorꢀallꢀbinsꢀcontainedꢀasꢀbelow.ꢀꢀ  
All luminous intensity (IV)ꢀandꢀdominantꢀwavelengthꢀ(λD)ꢀvaluesꢀshownꢀandꢀspecifiedꢀareꢀatꢀIF = 20 mA.  
X7  
X8  
X9  
Z5 or  
above  
46100 mcd  
32900 mcd  
23500 mcd  
16800 mcd  
12000 mcd  
Z4  
Z3  
Z2  
Z1  
520 nm  
530 nm  
DominantꢀWavelengthꢀ(λD)  
525 nm  
535 nm  
Important Notes:  
1. All ranks will be included per delivery; rank ratio will be based on the dice distribution.  
2. Pb content <1000 ppm.  
3. Tolerance of measurement of luminous intensity is ±15%.  
4. Tolerance of measurement of dominant wavelength is ±1 nm.  
5. Tolerance of measurement of VF is ±0.05 V.  
6. Packaging methods are available for selection; please refer to the “Cree LED Lamp Packaging Standard” docu-  
ment.  
7. Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions.  
8. Pleaseꢀreferꢀtoꢀtheꢀ“CreeꢀLEDꢀLampꢀSolderingꢀ&ꢀHandling”ꢀdocumentꢀforꢀinformationꢀaboutꢀhowꢀtoꢀuseꢀthisꢀLEDꢀ  
product safely.  
Cree, Inc.  
4600 Silicon Drive  
Durham, NC 27703  
USA Tel: +1.919.313.5300  
www.cree.com/ledlamps  
Copyright © 2008 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and  
the Cree logo are registered trademarks of Cree, Inc.  
2
CLD-CT058.000  
Graphs  
0
-10  
-40  
-30 -20  
-50  
If (mA)  
0.0  
Vr(V)  
100.0  
80.0  
60.0  
-10.0  
-20.0  
-30.0  
-40.0  
40.0  
20.0  
-50.0  
Ir(uA)  
Vf(V)  
0.0  
3.0  
FIG.2 REVERSE CURRENT VS.  
REVERSE VOLTAGE.  
5.0  
3.4 3.8  
4.2 4.6  
FIG.1 FORWARD CURRENT VS.  
FORWARD VOLTAGE.  
Half Power WL=38nm  
Domi WL= 525nm  
I (RELATIVE LUMINOUS INTENSITY)  
100%  
5.0  
4.0  
3.0  
75%  
50%  
25%  
2.0  
1.0  
WL(nm)  
500 600 700 800  
0%  
300  
If(mA)  
20.0 40.0 60.0 80.0 100.0  
400  
0.0  
0.0  
FIG.4 RELATIVE LUMINOUS INTENSITY VS.  
WAVELENGTH.  
FIG.3 RELATIVE LUMINOUS INTENSITY VS.  
FORWARD CURRENT.  
50% Power Angle : 15  
Ie(%)  
IF(mA)  
0
50  
100%  
40  
30  
80%  
60%  
20  
10  
40%  
20%  
0%  
Ta( C)  
0
-30  
0
90  
-90  
-60  
30  
60  
0.0  
20.0 40.0 60.0 80.0 100.0  
FIG.6 FAR FIELD PATTERN  
FIG.5 MAXIMUM FORWARD DC CURRENT VS  
AMBIENT TEMPERATURE (Tjmax=105 C)  
Cree, Inc.  
4600 Silicon Drive  
Durham, NC 27703  
Copyright © 2008 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and  
the Cree logo are registered trademarks of Cree, Inc.  
USA Tel: +1.919.313.5300  
www.cree.com/ledlamps  
3
CLD-CT058.000  
Mechanical Dimensions  
All dimensions are in mm. Tolerance is ±0.25 mm unless otherwise noted.  
An epoxy meniscus may extend about 1.5 mm down the leads.  
Burr around bottom of epoxy may be 0.5 mm max.  
Notes  
RoHSꢀCompliance  
The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or  
otherwise restricted materials in this product are below the maximum concentration values (also referred to as the  
threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Direc-  
tiveꢀ2002/95/ECꢀonꢀtheꢀrestrictionꢀofꢀtheꢀuseꢀofꢀcertainꢀhazardousꢀsubstancesꢀinꢀelectricalꢀandꢀelectronicꢀequipmentꢀ  
(RoHS),ꢀasꢀamendedꢀthroughꢀAprilꢀ21,ꢀ2006.  
Vision Advisory Claim  
Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye.  
Cree, Inc.  
4600 Silicon Drive  
Durham, NC 27703  
USA Tel: +1.919.313.5300  
www.cree.com/ledlamps  
Copyright © 2008 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and  
the Cree logo are registered trademarks of Cree, Inc.  
4
CLD-CT058.000  
Kit Number System  
CreeꢀLEDꢀlampsꢀareꢀtestedꢀandꢀsortedꢀintoꢀperformanceꢀbins.ꢀAꢀbinꢀisꢀspecifiedꢀbyꢀrangesꢀofꢀcolor,ꢀforwardꢀvoltage,ꢀ  
and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED  
Lamp Packaging Standard” document for more information about shipping and packaging options.  
CreeꢀLEDsꢀareꢀsoldꢀbyꢀorderꢀcodesꢀinꢀcombinationsꢀofꢀbinsꢀcalledꢀkits.ꢀOrderꢀcodesꢀareꢀconfiguredꢀinꢀtheꢀfollowingꢀ  
manner:  
Standard/Custom  
0: Standard  
C: Custom  
VF  
0: Full forward voltage distribution  
1~9, A~Z . . . : special request *  
Wd/Color  
1: Full-color distribution  
2~9, A~Z . . . : special request *  
aaaaaaaaa-aaa-aa- x x x x x  
I
V0: Full luminous intensity distribution  
1~9, A~Z . . . :special request *  
Packing type  
0: Standard = Bulk pack  
1~9, A~Z . . . : special request *  
Product P/N  
* Contact your Cree sales representative for ordering information.  
Standard Available Kits*  
Kit Number  
Description  
LC503TPG1-15P-A1-00001 5mm Round 15 Green, Full Rank, Bulk Pack  
LC503TPG1-15P-A1-00002 5mmꢀRoundꢀ15ꢀGreen,ꢀIV:ꢀFullꢀRank,ꢀHue:ꢀX7-X8,ꢀBulkꢀPack  
LC503TPG1-15P-A1-00003 5mmꢀRoundꢀ15ꢀGreen,ꢀIV:ꢀFullꢀRank,ꢀHue:ꢀX8-X9,ꢀBulkꢀPack  
LC503TPG1-15P-A1-00011 5mmꢀRoundꢀ15ꢀGreen,ꢀIV:ꢀZ2,ꢀZ3,ꢀZ4,ꢀHue:ꢀFullꢀRank,ꢀBulkꢀPack  
LC503TPG1-15P-A1-00012 5mmꢀRoundꢀ15ꢀGreen,ꢀIV:ꢀZ2,ꢀZ3,ꢀZ4,ꢀHue:ꢀX7-X8,ꢀBulkꢀPack  
LC503TPG1-15P-A1-00013 5mmꢀRoundꢀ15ꢀGreen,ꢀIV:ꢀZ2,ꢀZ3,ꢀZ4,ꢀHue:ꢀX8-X9,ꢀBulkꢀPack  
* Please contact your Cree representative about the availability of non-standard kits.  
Cree, Inc.  
4600 Silicon Drive  
Durham, NC 27703  
Copyright © 2008 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and  
the Cree logo are registered trademarks of Cree, Inc.  
USA Tel: +1.919.313.5300  
www.cree.com/ledlamps  
5
CLD-CT058.000  

相关型号:

LC503TPG1-30G-A

5mm Green InGaN LED
MARKTECH

LC503TPG1-30G-A-MT

LC503TPG1-30G-A-MT
MARKTECH

LC503TPG1-30H-A

5mm Green InGaN LED
MARKTECH
MARKTECH

LC503TPG1-30H-A1

Optoelectronic Device,
CREE

LC503TPG1-30P-A1

5-mm Round LED
CREE

LC503TPG1-30P-A1-00001

Optoelectronic Device
CREE

LC503TPG1-30Q-A1

5-mm Round LED
CREE

LC503TPG1-30Q-A1-00001

Optoelectronic Device
CREE