MK-R2 [CREE]
XLamp LEDs;Product family data sheet
Cree® XLamp® MK-R2 LEDs
PRoDuCt DEꢀCRiPtion
FEAtuREꢀ
tAbLE oF ContEntꢀ
Thꢀ XLamp® MK-R2 easyWhitꢀ® LeD
builds on thꢀ brꢀakthrough pꢀrformancꢀ
of thꢀ original MK-R by ꢀnabling
high-ꢁoltagꢀ driꢁꢀr solutions whilꢀ
proꢁiding a small, uniform, singlꢀ point
sourcꢀ for prꢀcisꢀ optical control. Thꢀ
MK-R2 sharꢀs thꢀ samꢀ mꢀchanical
footprint as thꢀ original MK-R, proꢁiding
customꢀrs with a sꢀamlꢀss upgradꢀ path
and shortꢀning thꢀ LeD luminairꢀ and
retrofit lamp design cycle.
•
Aꢁailablꢀ in 4-stꢀp and 2-stꢀp
EasyWhite bins at 2700 K & 3000 K,
80-CRI minimum
Charactꢀristics........................................2
Flux Charactꢀristics, Standard Ordꢀr
Codꢀs and Bins .......................................2
Rꢀlatiꢁꢀ Spꢀctral Powꢀr Distribution .....3
Relative Flux vs. Junction Temperature.3
elꢀctrical Charactꢀristics........................4
Rꢀlatiꢁꢀ Flux ꢁs. Currꢀnt .........................4
Rꢀlatiꢁꢀ Chromaticity ꢁs. Currꢀnt...........5
Rꢀlatiꢁꢀ Chromaticity ꢁs. Tꢀmpꢀraturꢀ..5
Typical Spatial Distribution.....................6
Thꢀrmal Dꢀsign.......................................6
Pꢀrformancꢀ Groups - Brightnꢀss .........7
Pꢀrformancꢀ Groups - Chromaticity......7
Crꢀꢀ easyWhitꢀ® Bins Plottꢀd on thꢀ
•
•
•
Maximum drive current: 420 mA
Low thermal resistance: 1.7 °C/W
Maximum junction tꢀmpꢀraturꢀ:
150 °C
•
•
•
Binned at 85 °C
Viewing angle: 120°
Unlimited floor life at
≤ 30 ºC/85% RH
•
Reflow solderable - JEDEC
J-STD-020C
MK-R2 LeDs arꢀ dꢀsignꢀd for high-output,
dirꢀctional lighting applications and
arꢀ thꢀ idꢀal rꢀplacꢀmꢀnt for lighting
applications that currently use inefficient
halogꢀnlamps.MK-R2LeDsarꢀoptimizꢀd
for use in track, accent, lamp retrofit,
downlighting and othꢀr applications
whꢀrꢀ color quality, consistꢀncy and
optical control arꢀ rꢀquirꢀd.
•
•
•
elꢀctrically nꢀutral thꢀrmal path
RoHS and REACh compliant
UL® rꢀcognizꢀd componꢀnt
(E349212)
1931 CIE Color Space.............................8
Bin and Ordꢀr Codꢀ Formats..................8
Reflow Soldering Characteristics...........9
Notꢀs .....................................................10
Mꢀchanical Dimꢀnsions .......................12
Tapꢀ and Rꢀꢀl........................................13
Packaging..............................................14
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and
EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
XLamp® mK-R2 LED
ChARACtERiꢀtiCꢀ
Cꢁaracꢂerꢃsꢂꢃcs
uꢄꢃꢂ
Mꢃꢄꢃmꢅm
typꢃcal
Maxꢃmꢅm
Thꢀrmal rꢀsistancꢀ, junction to soldꢀr point
Viewing angle - full width half maximum (FWHM)
Temperature coefficient of voltage
ESD withstand voltage (HBM per Mil-Std-883D)
DC forward currꢀnt
°C/W
dꢀgrꢀꢀs
mV/°C
v
1.7
120
-28
8000
420
mA
Rꢀꢁꢀrsꢀ currꢀnt
mA
100
Forward voltage (@ 233 mA, 85 °C)
Forward voltage (@ 233 mA, 25 °C)
LeD junction tꢀmpꢀraturꢀ
v
36
v
42
°C
150
FLuX ChARACtERiꢀtiCꢀ, ꢀtAnDARD oRDER CoDEꢀ AnD binꢀ (iF = 233 mA, tJ = 85 °C)
Thꢀ following tablꢀs proꢁidꢀ ordꢀr codꢀs for XLamp MK-R2 easyWhitꢀ LeDs. For a complꢀtꢀ dꢀscription of thꢀ ordꢀr codꢀ nomꢀnclaturꢀ,
please reference Bin and Order Code Formats (page 8).
Mꢃꢄꢃmꢅm Lꢅmꢃꢄꢆꢅs Flꢅx
2-ꢀꢂep
4-ꢀꢂep
CCt
Raꢄge
Flꢅx
(lm) @
25 °C*
Cꢆlꢆr
Flux (lm)
@ 85 °C
Cꢁrꢆmaꢂꢃcꢃꢂy
Regꢃꢆꢄ
Cꢁrꢆmaꢂꢃcꢃꢂy
Regꢃꢆꢄ
Grꢆꢅp
order Cꢆde
order Cꢆde
G4
G2
G2
F4
840
780
780
730
961
893
893
847
MKRBWT-00-0000-0N0HG430H
MKRBWT-00-0000-0N0HG230H
MKRBWT-00-0000-0N0HG227H
MKRBWT-00-0000-0N0HF427H
MKRBWT-00-0000-0N0HG430F
MKRBWT-00-0000-0N0HG230F
MKRBWT-00-0000-0N0HG227F
MKRBWT-00-0000-0N0HF427F
3000 K
2700 K
30H
27H
30F
80-CRI
easyWhitꢀ
27F
Notꢀs:
•
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI
measurements. See the Measurements section (page 10).
•
Minimum CRI for 80-CRI Whitꢀ is 80.
*
Flux values @ 25 °C are calculated and for reference only.
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
2
XLamp® mK-R2 LED
RELAtivE ꢀPECtRAL PowER DiꢀtRibution
100
80
60
40
20
0
Warm White
380
430
480
530
580
630
680
730
780
Wavelength (nm)
RELAtivE FLuX vꢀ. JunCtion tEMPERAtuRE (iF = 233 mA)
120
100
80
60
40
20
0
25
50
75
100
125
150
Junction Temperature (ºC)
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
3
XLamp® mK-R2 LED
ELECtRiCAL ChARACtERiꢀtiCꢀ (tJ = 85 °C)
450
400
350
300
250
200
150
100
50
0
33.0
34.0
35.0
36.0
37.0
38.0
Forward Voltage (V)
RELAtivE FLuX vꢀ. CuRREnt (tJ = 85 °C)
180
150
120
90
60
30
0
0
50
100
150
200
250
300
350
400
450
Forward Current (mA)
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
4
XLamp® mK-R2 LED
RELAtivE ChRoMAtiCitꢇ vꢀ. CuRREnt - wARM whitE (tJ = 85 °C)
0.005
0.004
0.003
0.002
0.001
0.000
-0.001
-0.002
-0.003
-0.004
-0.005
-0.006
ΔCCx
ΔCCy
0
50
100
150
200
250
300
350
400
450
Current (mA)
RELAtivE ChRoMAtiCitꢇ vꢀ. tEMPERAtuRE - wARM whitE (iF = 233 mA)
0.005
0.004
0.003
0.002
0.001
0.000
-0.001
-0.002
-0.003
-0.004
-0.005
-0.006
ΔCCx
ΔCCy
0
25
50
75
100
125
150
Tsp (°C)
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
5
XLamp® mK-R2 LED
tꢇPiCAL ꢀPAtiAL DiꢀtRibution
100
80
60
40
20
0
-90
-70
-50
-30
-10
10
30
50
70
90
Angle (º)
thERMAL DEꢀiGn
Thꢀ maximum forward currꢀnt is dꢀtꢀrminꢀd by thꢀ thꢀrmal rꢀsistancꢀ bꢀtwꢀꢀn thꢀ LeD junction and ambiꢀnt. It is crucial for thꢀ ꢀnd
product to bꢀ dꢀsignꢀd in a mannꢀr that minimizꢀs thꢀ thꢀrmal rꢀsistancꢀ from thꢀ soldꢀr point to ambiꢀnt in ordꢀr to optimizꢀ lamp lifꢀ
and optical charactꢀristics.
450
400
350
300
250
200
150
100
50
Rj-a = 2°C/W
Rj-a = 4°C/W
Rj-a = 6°C/W
Rj-a = 8°C/W
0
0
20
40
60
80
100
120
140
160
Ambient Temperature (ºC)
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
6
XLamp® mK-R2 LED
PERFoRMAnCE GRouPꢀ - bRiGhtnEꢀꢀ (iF = 233 mA, tJ = 85 °C)
XLamp MK-R2 LEDs are tested for luminous flux and placed into one of the following bins.
Grꢆꢅp Cꢆde
Mꢃꢄꢃmꢅm Lꢅmꢃꢄꢆꢅs Flꢅx Maxꢃmꢅm Lꢅmꢃꢄꢆꢅs Flꢅx
D2
D4
e2
e4
F2
F4
G2
G4
H2
H4
J2
J4
K2
510
550
590
635
680
730
780
840
900
970
1040
1120
1200
550
590
635
680
730
780
840
900
970
1040
1120
1200
1290
PERFoRMAnCE GRouPꢀ - ChRoMAtiCitꢇ (tJ = 85 °C)
XLamp MK-R2 LEDs are tested for chromaticity and placed into one of the regions defined by the following bounding coordinates.
Easywꢁꢃꢂe Cꢆlꢆr temperaꢂꢅres – 4-ꢀꢂep
Easywꢁꢃꢂe Cꢆlꢆr temperaꢂꢅres – 2-ꢀꢂep
Cꢆde
CCt
x
y
Cꢆde
CCt
x
y
0.4242
0.4322
0.4449
0.4359
0.4475
0.4573
0.4695
0.4589
0.3919
0.4096
0.4141
0.3960
0.3994
0.4178
0.4207
0.4021
0.4291
0.4333
0.4395
0.4351
0.4528
0.4578
0.4638
0.4586
0.3973
0.4062
0.4084
0.3994
0.4046
0.4138
0.4152
0.4060
30F
3000 K
30H
3000 K
27F
2700 K
27H
2700 K
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
7
XLamp® mK-R2 LED
CREE EAꢀꢇwhitE® binꢀ PLottED on thE 1931 CiE CoLoR ꢀPACE (tJ = 85 °C)
bin AnD oRDER CoDE FoRMAtꢀ
Bin codes and order codes are configured as follows.
order Cꢆde
bꢃꢄ Cꢆde
Series = MKR
Series = MKR
Internal code
Internal code
Forward voltage class
N: Default (36 V)
Luminous flux group
Internal code
CRI specification
H: 80-CRI minimum
SSSCCC-E-DDD-MM-HK-L-PP
CRI specification
H: 80-CRI minimum
SSSCCC-HH-HHHH-GHKLNNNNN
Kit code
Forward voltage class
N: Default (36 V)
Internal code
Color
BWT = White
Chromaticity bin
Color
BWT = White
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
8
XLamp® mK-R2 LED
REFLow ꢀoLDERinG ChARACtERiꢀtiCꢀ
In testing, Cree has found XLamp MK-R2 LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a general
guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of the solder paste used.
Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment.
tP
Critical Zone
TL to TP
TP
Ramp-up
TL
tS
Tsmax
Tsmin
Ramp-down
ts
Preheat
25
t 25˚C to Peak
IPC/JEDEC J-STD-020C
Time
Prꢆfꢃle Feaꢂꢅre
Lead-Free ꢀꢆlder
Aꢁꢀragꢀ Ramp-Up Ratꢀ (Tsmax to Tp)
1.2 °C/second
120 °C
Prꢀhꢀat: Tꢀmpꢀraturꢀ Min (Tsmin
Prꢀhꢀat: Tꢀmpꢀraturꢀ Max (Tsmax
Prꢀhꢀat: Timꢀ (tsmin to tsmax
)
)
170 °C
65-150 sꢀconds
217 °C
)
Timꢀ Maintainꢀd Aboꢁꢀ: Tꢀmpꢀraturꢀ (TL)
Timꢀ Maintainꢀd Aboꢁꢀ: Timꢀ (tL)
45-90 seconds
Peak/Classification Temperature (Tp)
235 - 245 °C
Time Within 5 °C of Actual Peak Temperature (tp)
Ramp-Down Ratꢀ
20-40 sꢀconds
1 - 6 °C/second
4 minutꢀs max.
Time 25 °C to Peak Temperature
Notꢀ: All tꢀmpꢀraturꢀs rꢀfꢀr to thꢀ topsidꢀ of thꢀ packagꢀ, mꢀasurꢀd on thꢀ packagꢀ body surfacꢀ.
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
9
XLamp® mK-R2 LED
notEꢀ
Measꢅremeꢄꢂs
The luminous flux, radiant power, chromaticity and CRI measurements in this document are binning specifications only and solely
rꢀprꢀsꢀnt product mꢀasurꢀmꢀnts as of thꢀ datꢀ of shipmꢀnt. Thꢀsꢀ mꢀasurꢀmꢀnts will changꢀ oꢁꢀr timꢀ basꢀd on a numbꢀr of factors
that are not within Cree’s control and are not intended or provided as operational specifications for the products. Calculated values are
provided for informational purposes only and are not intended as specifications.
Pre‑Release Qualification Testing
Plꢀasꢀ rꢀad thꢀ LeD Rꢀliability Oꢁꢀrꢁiꢀw for details of the qualification process Cree applies to ensure long-term reliability for XLamp
LEDs and details of Cree’s pre-release qualification testing for XLamp LEDs.
Lꢅmeꢄ Maꢃꢄꢂeꢄaꢄce
Crꢀꢀ now usꢀs standardizꢀd IeS LM-80-08 and TM-21-11 mꢀthods for collꢀcting long-tꢀrm data and ꢀxtrapolating LeD lumꢀn maintꢀnancꢀ.
For information on the specific LM-80 data sets available for this LED, refer to the public LM-80 rꢀsults documꢀnt.
Plꢀasꢀ rꢀad thꢀ Long-Tꢀrm Lumꢀn Maintꢀnancꢀ application notꢀ for morꢀ dꢀtails on Crꢀꢀ’s lumꢀn maintꢀnancꢀ tꢀsting and forꢀcasting.
Plꢀasꢀ rꢀad thꢀ Thꢀrmal Managꢀmꢀnt application notꢀ for dꢀtails on how thꢀrmal dꢀsign, ambiꢀnt tꢀmpꢀraturꢀ, and driꢁꢀ currꢀnt affꢀct
thꢀ LeD junction tꢀmpꢀraturꢀ.
Mꢆꢃsꢂꢅre ꢀeꢄsꢃꢂꢃꢈꢃꢂy
Cree recommends keeping XLamp LEDs in the provided, resealable moisture-barrier packaging (MBP) until immediately prior to soldering.
Unopꢀnꢀd MBPs that contain XLamp LeDs do not nꢀꢀd spꢀcial storagꢀ for moisturꢀ sꢀnsitiꢁity.
Once the MBP is opened, XLamp MK-R2 LEDs may be stored as MSL 1 per JEDEC J-STD-033, meaning they have unlimited floor life in
conditions of ≤ 30 ºC/85% relative humidity (RH). Regardless of storage condition, Cree recommends sealing any unsoldered LEDs in the
original MBP.
Rꢆhꢀ Cꢆmplꢃaꢄce
The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold
limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as
implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product
Documꢀntation sꢀctions of www.crꢀꢀ.com.
REACꢁ Cꢆmplꢃaꢄce
REACh substances of very high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA)
has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree representative to
insure you get the most up-to-date REACh SVHC Declaration. REACh banned substance information (REACh Article 67) is also available
upon rꢀquꢀst.
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
10
XLamp® mK-R2 LED
notEꢀ - ContinuED
uL® Recꢆgꢄꢃzed Cꢆmpꢆꢄeꢄꢂ
Level 4 enclosure consideration. The LED package or a portion thereof has been investigated as a fire and electrical enclosure per ANSI/
UL 8750.
vꢃsꢃꢆꢄ Adꢈꢃsꢆry
WARNING: Do not look at an ꢀxposꢀd lamp in opꢀration. eyꢀ injury can rꢀsult. For morꢀ information about LeDs and ꢀyꢀ safꢀty, plꢀasꢀ
rꢀfꢀr to thꢀ LeD eyꢀ Safꢀty application notꢀ.
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
11
XLamp® mK-R2 LED
MEChAniCAL DiMEnꢀionꢀ
Thꢀrmal ꢁias, if prꢀsꢀnt, arꢀ not shown on thꢀsꢀ drawings.
All measurements are ±.13 mm unless otherwise indicated.
7.00
4.08
.73
7.00
R3.25
tꢆp vꢃeꢉ
ꢀꢃde vꢃeꢉ
6.70
REF.
6.70
6.70
.70
.70
6.76
6.76
REF.
6.76
REF.
Anodꢀ
Anodꢀ
Anodꢀ
.70
3.90
Alꢂerꢄaꢂe bꢆꢂꢂꢆm vꢃeꢉ
Alꢂerꢄaꢂe bꢆꢂꢂꢆm vꢃeꢉ
bꢆꢂꢂꢆm vꢃeꢉ
.70
.70
.70
.25
1.29
.25
6.76
6.76
1.24
3.90
6.70
1.29
6.70
Recꢆmmeꢄded ꢀꢂeꢄcꢃl Paꢂꢂerꢄ
Recꢆmmeꢄded PCb ꢀꢆlder Pad
(Shaded Area Is Open)
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
12
XLamp® mK-R2 LED
tAPE AnD REEL
All Cree carrier tapes conform to EIA-481D, Automated Component Handling Systems Standard.
All dimꢀnsions in mm.
1.5± .1
User Feed Direction
1.75
±.10
12±.1
4±.10
START
END
4.31
CATHODE SIDE
16
+.3
-.0
7.4
0.36
ANODE SIDE
Leader
420mm (min) of
empty pockets
sealed with tape
(35 pockets min.)
Loaded Pockets
(1000 Lamps)
Trailer
180mm (min) of
empty pockets
sealed with tape
(15 pockets min.)
12.4
+.2
.0
MEASURED AT HUB
330
+.25
-.75
16.4
+0.2
.0
1.9±.4
MEASURED AT HUB
21±.4
13.1 ±.2
12.4
+1.0
-.5
MEASURED AT EDGE
60°
60°
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
13
XLamp® mK-R2 LED
PACKAGinG
Unpackaged Reel
Label with Cree Bin Code,
Quantity, Reel ID
Packaged Reel
Label with Cree Order Code,
Quantity, Reel ID, PO #
Label with Cree Bin Code,
Quantity, Reel ID
Boxed Reel
Label with Cree Order Code,
Quantity, Reel ID, PO #
Patent Label
Label with Cree Bin Code,
Quantity, Reel ID
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
14
相关型号:
©2020 ICPDF网 联系我们和版权申明