SLV6D-FKB-CM1P1F1BB7D3D3 [CREE]
Cree® PLCC6 3 in 1 SMD LED;
| 型号： | SLV6D-FKB-CM1P1F1BB7D3D3 |
| 厂家： | 
CREE, INC |
| 描述： | Cree® PLCC6 3 in 1 SMD LED |
| 文件： | 总11页 (文件大小：1441K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
PRODUCT FAMILY DATA SHEET
®
Cree PLCC6 3 in 1 SMD LED
SLV6D-FKB
PRODUCT DESCRIPTION
FEATURES
APPLICATIONS
• Size (mm):5.5 x 5.5
These SMD LEDs are packaged in an
industry standard PLCC6 package.
These high performance tricolor SMT
LEDs are designed to work in a wide
range of applications. A wide viewing
angle and high brightness make
these LEDs suitable for various
full color applications.
• Decorative lighting
• Amusement
• Dominant Wavelength:
Red (619 - 624nm)
Green (520 - 540nm)
Blue (460 - 480nm)
• Luminous Intensity (mcd)
Red (560 - 1120)
Green (900- 1800)
Blue (180 - 450)
The encapsulation resin contains UV
inhibitors to minimize the effects of
long-termexposuretodirectsunlight,
resulting in stable light output over
the life of the LED.
• Moisture Sensitivity Level: 5a
• Lead-Free
• RoHS Compliant
• Matte Surface
*:This part is tested under the condition of assembling it on a PCB with isolating the electrical path by silicone.
The leads area of the LED is not IPx8 rated and it’s required to insulate for moisture by customer in outdoor
application.
Copyright © 2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
the Cree logo are registered trademarks of Cree, Inc.
USA Tel: +1.919.313.5300
Cree PLCC6 3 in 1 SMD LED
SLV6D-FKB
ABSOLUTE MAXIMUM RATINGS (TA = 25°C)
Absolute Maximum Rating
Items
Symbol
Unit
R
50
G
35
B
Note 1
Forward Current
IF
35
100
5
mA
mA
Note 2
Peak Forward Current
Reverse Voltage
IFP
VR
PD
200
5
100
5
V
Power Dissipation
125
126
133
mW
°C
Operation Temperature
T
-40 ~ +100
-40 ~ +100
110
opr
Storage Temperature
Tstg
TJ
°C
Junction Temperature
110
450
650
230
230
110
450
680
200
200
°C
Junction/ambient 1 chip on
Junction/ambient 3 chips on
Junction/solder point 1 chip on
Junction/solder point 3 chips on
RTHJA
RTHJA
RTHJS
RTHJS
400
°C/W
°C/W
°C/W
°C/W
580
230
230
Electrostatic Discharge
Classification(MIL-STD-883E)
ESD
1000 V
Note: 1.Single-color light.
2.Pulse width ≤0.1 msec, duty ≤1/10.
TYPICAL ELECTRICAL & OPTICAL CHARACTERISTICS (TA = 25°C)
Values
G
Characteristics
Condition
Symbol
Unit
R
B
I = 15 mA(R)
IF = 10 mA(G)
IFF = 10 mA(B)
Dominant Wavelength
λDOM
Δ λ
619~624
520~540
38
460~480
nm
nm
I = 15 mA(R)
IF = 10 mA(G)
IFF = 10 mA(B)
Spectral bandwidth at 50% IREL max
Forward Voltage
24
28
I = 15 mA(R)
IF = 10 mA(G)
IFF = 10 mA(B)
VF(avg)
VF(max)
IV(min)
IV(avg)
IR
2.0
2.5
560
780
10
2.8
3.6
3.0
3.8
180
280
10
V
V
I = 15 mA(R)
IF = 10 mA(G)
IFF = 10 mA(B)
900
1200
10
mcd
mcd
μA
Luminous Intensity
Reverse Current (max)
VR = 5 V
Copyright © 2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
2
Cree PLCC6 3 in 1 SMD LED
SLV6D-FKB
INTENSITY BIN LIMIT (RED IF = 15 mA, GREEN IF = 10 mA, BLUE IF = 10 mA)
Red
Green
Blue
Bin Code
Min.(mcd) Max.(mcd)
Bin Code
Min.(mcd) Max.(mcd)
Bin Code
Min.(mcd)
Max.(mcd)
K
np
M
560
635
710
805
900
710
805
N
st
P
900
1120
1260
1400
1600
1800
E
bc
F
180
202
224
252
280
318
355
224
252
280
318
355
403
450
1010
1120
1260
1400
900
qr
N
1010
1120
vw
Q
de
G
fg
H
Tolerance of measurement of luminous intensity is ±10%.
COLOR BIN LIMIT (RED IF = 15 mA, GREEN IF = 10 mA, BLUE IF = 10 mA)
Red
Green
Blue
Bin Code
Min.(nm)
Max.(nm)
Bin Code
Min.(nm)
Max.(nm)
Bin Code
Min.(nm)
Max.(nm)
RB
619
624
G7
G23
G8
520
522.5
525
525
527.5
530
B3
B23
B4
460
462.5
465
465
467.5
470
G45
G9
527.5
530
532.5
535
B45
B5
467.5
470
472.5
475
G67
Ga
532.5
535
537.5
540
B67
B6
472.5
475
477.5
480
Tolerance of measurement of dominant wavelength is ±1 nm.
Copyright © 2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
3
Cree PLCC6 3 in 1 SMD LED
SLV6D-FKB
ORDER CODE TABLE*
Luminous Intensity (mcd)
Dominant Wavelength (nm)
Pack-
age
Kit Number
Color
Color
Bin
Min.
(nm)
Max.
(nm)
Min.
Max.
Color Bin
Red
560
900
180
1120
1800
450
RB
619
RB
624
Reel
SLV6D-FKB-CKNNQEHBB7a363
Green
Blue
G7
B3
RB
520
460
619
Ga
B6
RB
540
480
624
Reel
Reel
Reel
Reel
Reel
Reel
Reel
Reel
Red
Any 1 Intensity bin from K(560) - N(1120)
Any 1 Intensity bin from N(900) - Q(1800)
Any 1 Intensity bin from E(180) - H(450)
Any 1 Intensity bin from M(710) - N(1120)
Any 1 Intensity bin from P(1120) - Q(1800)
Any 1 Intensity bin from F(224) - H(450)
SLV6D-FKB-CK1N1E1BB7D3D3
SLV6D-FKB-CM1P1F1BB7D3D3
Green
Blue
Any 1 hue bin from G7(520) - Ga(540)
Any 1 hue bin from B3(460) - B6(480)
Red
RB
619
RB
624
Green
Blue
Any 1 hue bin from G7(520) - Ga(540)
Any 1 hue bin from B3(460) - B6(480)
Notes:
1. The above kit numbers represent the order codes which include multiple intensity-bin and color-bin codes. Only one
intensity-bin code and one color-bin code will be shipped on each reel. Single intensity-bin code and single color-
bin code will be orderable in certain quantities.
2. For example, any 1 intensity-bin from K - N means only 1 intensity-bin (K or np or M or qr or N) will be
shipped by Cree.
3. For example, any 1 color-bin from G7 - Ga means only 1 color-bin (G7 or G23 or G8 or G45 or G9 or G67 or Ga) will
be shipped by Cree.
4. Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions.
5. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED
product safely.
Copyright © 2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
4
Cree PLCC6 3 in 1 SMD LED
SLV6D-FKB
GRAPHS
The above data are collected from statistical figures that do not necessarily correspond to the actual
parameters of each single LED. Hence, these data will be changed without further notice.
Copyright © 2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
5
Cree PLCC6 3 in 1 SMD LED
SLV6D-FKB
GRAPHS
The above data are collected from statistical figures that do not necessarily correspond to the actual
parameters of each single LED. Hence, these data will be changed without further notice.
Copyright © 2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
6
Cree PLCC6 3 in 1 SMD LED
SLV6D-FKB
MECHANICAL DIMENSIONS
All dimensions are in mm.
NOTES
RoHS Compliance
The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or other-
wise restricted materials in this product are below the maximum concentration values (also referred to as the threshold
limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/
EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as
amended through April 21, 2006.
Vision Advisory Claim
Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye.
Copyright © 2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
7
Cree PLCC6 3 in 1 SMD LED
SLV6D-FKB
KIT NUMBER SYSTEM
Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and
brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED Lamp
Packaging Standard” document for more information about shipping and packaging options.
Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following man-
ner:
Copyright © 2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
8
Cree PLCC6 3 in 1 SMD LED
SLV6D-FKB
RELIABILITY
Tests and Results
Number of
Damaged
Test
Applicable Standards
Test Condition
Note
JEITA ED-4701
-40°C~25°C~100°C~25°C
Temperature Cycle
100 cycles
100 cycles
10 cycles
500 hrs
500 hrs
500 hrs
1000 hrs
1000 hrs
500 hrs
500 hrs
2 times
/
0/45
0/45
0/45
0/45
0/45
0/45
0/45
0/45
0/45
0/45
0/45
0/45
100 105
30 mins, 5 mins, 30 mins, 5 mins
-40°C~100°C
30 mins, 30 mins
Thermal Shock
Moisture Resistance
MIL-STD-202G
JEITA ED-4701
200 203
25°C~65°C~
90%RH 24hrs/1cycle
JEITA ED-4701
200 201
High Temperature Storage
Temperature Humidity Storage
Low Temperature Storage
High Temperature Life Test
Life Test
TA=100°C
JEITA ED-4701
100 103
TA=60°C
RH=90%
JEITA ED-4701
200 202
TA=-40°C
TA=85°C
IF=15 mA
-
-
-
-
T =25°C
IF: R=30mAAG=35mA B=20mA
60°C RH=90%
IF=15 mA
High Humidity Heat Life Test
Low Temperature Life Test
Ta=-40°C
IF: R=30mA G=35mA B=20mA
Resistance to Soldering Heat(Reflow
Soldering)
JEITA ED-4701
300 301
Tsol=250°C,10sec
(Pre treatment 30°C,70%,168hrs)
MIL-STE-883
Method 2007
20G min, 20 to 2000Hz, 4cycles, 4mins,
Each x,y,z
Vibration-variable Frequency
Human body model 1000 V
(Forward and reverse current conduct
electricity each 1time)
Electrostatic Discharge Test
AEC(Q101-001)
/
0/45
Failure Criteria
Criteria for Judgment
Test
Condition
Item
Symbol
Min.
Max.
Forward Voltage
Reverse Current
VF
IR
IF = 20 mA
VR = 5 V
–
Initial Data x 1.1
-
10 μA
Luminous Flux/Intensity
ФV
IF = 20 mA
Initial Data x 0.7
-
Resistance to Soldering
Heat
-
-
IF = 20 mA
IF = 20 mA
No dead lamps and visual damage
Vibration-variable
No dead lamps and visual damage
Frequency
Copyright © 2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
9
Cree PLCC6 3 in 1 SMD LED
SLV6D-FKB
REFLOW SOLDERING
•ꢀ TheꢀSLV6D-FKBꢀisꢀratedꢀasꢀaꢀMSLꢀ5aꢀproduct.ꢀꢀ
•ꢀ Theꢀrecommendedꢀfloorꢀlifeꢀoutꢀofꢀbagꢀisꢀ24hrs.ꢀ
•ꢀ Theꢀtemperatureꢀprofileꢀisꢀasꢀbelow:
Melting-point
Cooling
Pre-heat
Soak
Reflow
Time
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ
Use only with SLV6D-FKB
Solderingꢀpad:
Solder
Average ramp-up rate = 4ºC/s max
Preheat temperature = 150ºC ~200ºC
Preheat time = 120s max
2.7
Ramp-down rate = 6ºC/s max
Peak temperature = 250ºC max
Time within 5ºC of actual Peak Temperature = 10s max
Duration above 217ºC is 60s max
8.2
Copyright © 2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
10
Cree PLCC6 3 in 1 SMD LED
SLV6D-FKB
PACKAGING
• The boxes are not water resistant and they must be kept away from water and moisture.
• The LEDs are packed in cardboard boxes after packaging in normal or anti-electrostatic bags.
• Cardboard boxes will be used to protect the LEDs from mechanical shocks during transportation.
• The reel pack is applied in SMD LED.
• Max 3000 pcs per reel.
Copyright © 2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
11
相关型号：
SLVDA2.8.TB
Trans Voltage Suppressor Diode, 300W, 2.8V V(RWM), Bidirectional, 4 Element, Silicon, MS-012AA
SEMTECH
SLVDA2.8.TC
Trans Voltage Suppressor Diode, 300W, 2.8V V(RWM), Bidirectional, 8 Element, Silicon, SO-8
SEMTECH
©2020 ICPDF网 联系我们和版权申明