XD16AWT-H0-0000-00000UFE5 [CREE]
Cree® XLamp® XD16 LEDs;
| 型号： | XD16AWT-H0-0000-00000UFE5 |
| 厂家： | 
CREE, INC |
| 描述： | Cree® XLamp® XD16 LEDs |
| 文件： | 总29页 (文件大小：2078K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Product family data sheet
Cree® XLamp® XD16 LEDs
PꢀoDuCt DEꢁCꢀiPtion
FEAtuꢀEꢁ
tAbLE oF ContEntꢁ
Thꢀ XLamp® XD16 LeDs arꢀ thꢀ industry’s
first Extreme Density LEDs, delivering up
to 5½ times higher lumen density than
Cree’s previous generation of high‑power
LeDs. Thꢀ cꢀramic-basꢀd XD16 LeD
is built on Cree’s groundbreaking
NX Technology Platform to address
challenges with luminaire manufacturing,
thermal design, optical design and
reliability that have been experienced
with competing LEDs. The XD16 LED
enables lighting manufacturers to
achieve dramatic improvements in
lumen output and efficacy, without
increasing the size of the LED array, for
a wide spectrum of lighting applications
such as color tuning, directional lighting
and industrial lighting.
•
Available in outdoor white and 70‑, 80‑
and 90‑CRI white
Charactꢀristics............................................2
Flux Characteristics ....................................3
Relative Spectral Power Distribution ...... 12
Relative Flux vs. Junction Temperature.. 12
Electrical Characteristics......................... 13
Relative Flux vs. Current .......................... 13
Relative Chromaticity vs. Current and
•
•
•
•
•
•
•
•
•
•
ANSI‑compatible chromaticity bins
3-stꢀp and 5-stꢀp options
Binned at 85 °C
Maximum drive current: 2000 mA
Low thermal resistance: 6 °C/W
Wide viewing angle: 135°
Tꢀmpꢀraturꢀ............................................. 14
Typical Spatial Distribution...................... 15
Unlimited floor life at ≤ 30 ºC/85% RH
Reflow solderable ‑ JEDEC J‑STD‑020C Thermal Design........................................ 15
RoHS and REACh compliant
UL® recognized component (E349212)
Performance Groups ‑ Luminous Flux.... 16
Performance Groups ‑ Chromaticity....... 16
Cree’s Cool White Kits Plotted on ANSI
Standard Chromaticity Regions .............. 19
Cree’s Warm and Neutral White Kits
Plotted on ANSI Standard Chromaticity
Regions..................................................... 20
Cree’s EasyWhite® White Kits Plotted on
ANSI Standard Chromaticity Regions..... 21
Cree’s Standard Chromaticity Kits .......... 22
Bin and Ordꢀr Codꢀ Formats................... 23
Reflow Soldering Characteristics............ 24
Notꢀs ........................................................ 25
Mechanical Dimensions .......................... 27
Tape and Reel........................................... 28
Packaging................................................. 29
Copyright © 2017-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo,
XLamp® and EasyWhite® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
XLamp® XD16 LED
ChAꢀACtEꢀiꢁtiCꢁ
Cꢂaracꢃerꢄsꢃꢄcs
uꢅꢄꢃ
Mꢄꢅꢄmꢆm
typꢄcal
Maxꢄmꢆm
Thermal resistance, junction to solder point
Viewing angle (FWHM)
°C/W
6
degrees
135
-1.3
Temperature coefficient of voltage
DC forward current
mV/°C
mA
v
2000
Reverse voltage
5
3
Forward voltage (@ 350 mA, 85 °C)
Forward voltage (@ 700 mA, 85 °C)
Forward voltage (@ 1000 mA, 85 °C)
Forward voltage (@ 1500 mA, 85 °C)
Forward voltage (@ 2000 mA, 85 °C)
LED junction temperature
v
2.73
2.83
2.90
3.00
3.07
v
v
v
v
°C
150
Copyright © 2017-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
2
XLamp® XD16 LED
FLuX ChAꢀACtEꢀiꢁtiCꢁ (tJ = 85 °C)
The following table provides order codes for XLamp XD16 LEDs. For a complete description of the order code nomenclature, please see
the Bin and Order Code Formats section (page 23). For definitions of the chromaticity kits, please see the Cree’s Standard Chromaticity
Kits section (page 22).
Calcꢆlaꢃed
Mꢄꢅꢄmꢆm Lꢆmꢄꢅꢇꢆs Flꢆx
Mꢄꢅꢄmꢆm
Luminous Flux (lm)
@ 85 °C**
Cꢂrꢇmaꢃꢄcꢄꢃy
order Cꢇdes
(lm) @ 350 mA
Flꢆx
Flꢆx
Kꢄꢃ
CCt
Cꢇde (lm) @ (lm) @ 700 mA
1.0 A
nꢇ Mꢄꢅꢄmꢆm Cꢀi
70 CRI Minimum
80 CRI Minimum
90 CRI Minimum
85 °C
25 °C*
XD16AWT‑H0‑0000‑
000000JDT
XD16AWT‑H0‑0000‑
00000BJDT
XD16AWT‑H0‑0000‑
00000HJDT
S2
R5
R4
S2
R5
R4
S3
S2
R5
R4
S3
S2
R5
R4
R3
R2
148
162
272
255
239
272
255
239
287
272
255
239
287
272
255
239
224
209
365
343
321
365
343
321
385
365
343
321
385
365
343
321
301
281
XD16AWT‑H0‑0000‑
000000HDT
XD16AWT‑H0‑0000‑
00000BHDT
XD16AWT‑H0‑0000‑
00000HHDT
DT
7000 K
139
130
148
139
130
156
148
139
130
156
148
139
130
122
114
152
142
162
152
142
170
162
152
142
170
162
152
142
133
125
XD16AWT‑H0‑0000‑
00000HGDT
XD16AWT‑H0‑0000‑
000000JE1
XD16AWT‑H0‑0000‑
00000BJE1
XD16AWT‑H0‑0000‑
00000HJE1
XD16AWT‑H0‑0000‑
000000HE1
XD16AWT‑H0‑0000‑
00000BHE1
XD16AWT‑H0‑0000‑
00000HHE1
e1
50
6500 K
XD16AWT‑H0‑0000‑
00000HGE1
XD16AWT‑H0‑0000‑
000000K50
XD16AWT‑H0‑0000‑
000000J50
XD16AWT‑H0‑0000‑
00000HJ50
6200 K
XD16AWT‑H0‑0000‑
000000H50
XD16AWT‑H0‑0000‑
00000HH50
XD16AWT‑H0‑0000‑
00000HG50
XD16AWT‑H0‑0000‑
000000KDV
XD16AWT‑H0‑0000‑
00000BKDV
XD16AWT‑H0‑0000‑
000000JDV
XD16AWT‑H0‑0000‑
00000BJDV
XD16AWT‑H0‑0000‑
00000HJDV
XD16AWT‑H0‑0000‑
000000HDV
XD16AWT‑H0‑0000‑
00000BHDV
XD16AWT‑H0‑0000‑
00000HHDV
Dv
6000 K
XD16AWT‑H0‑0000‑
00000HGDV
XD16AWT‑H0‑0000‑
00000UFDv
XD16AWT‑H0‑0000‑
00000UeDv
Notꢀ
•
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 25).
•
Cree XLamp XD16 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than
the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions
specified by the order code.
*
Flux values @ 25 °C are calculated and for reference only.
** Flux values @ 700 mA and 1.0 A are calculated and for reference only.
Copyright © 2017-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
3
XLamp® XD16 LED
FLuX ChAꢀACtEꢀiꢁtiCꢁ (tJ = 85 °C) - CꢀꢁtIꢁꢂed
Calcꢆlaꢃed
Mꢄꢅꢄmꢆm Lꢆmꢄꢅꢇꢆs Flꢆx
Mꢄꢅꢄmꢆm
Luminous Flux (lm)
@ 85 °C**
Cꢂrꢇmaꢃꢄcꢄꢃy
order Cꢇdes
(lm) @ 350 mA
Flꢆx
Flꢆx
Kꢄꢃ
CCt
Cꢇde (lm) @ (lm) @ 700 mA
1.0 A
nꢇ Mꢄꢅꢄmꢆm Cꢀi
70 CRI Minimum
80 CRI Minimum
90 CRI Minimum
85 °C
25 °C*
XD16AWT‑H0‑0000‑
000000KE2
XD16AWT‑H0‑0000‑
00000BKE2
S3
S2
R5
R4
R3
R2
S3
S2
R5
R4
R3
R2
S3
S2
R5
R4
R3
R2
156
170
287
272
255
239
224
209
287
272
255
239
224
209
287
272
255
239
224
209
385
365
343
321
301
281
385
365
343
321
301
281
385
365
343
321
301
281
XD16AWT‑H0‑0000‑
000000JE2
XD16AWT‑H0‑0000‑
00000BJE2
XD16AWT‑H0‑0000‑
00000HJE2
148
139
130
122
114
156
148
139
130
122
114
156
148
139
130
122
114
162
152
142
133
125
170
162
152
142
133
125
170
162
152
142
133
125
XD16AWT‑H0‑0000‑
000000HE2
XD16AWT‑H0‑0000‑
00000BHE2
XD16AWT‑H0‑0000‑
00000HHE2
E2
5700 K
XD16AWT‑H0‑0000‑
00000HGE2
XD16AWT‑H0‑0000‑
00000UFE2
XD16AWT‑H0‑0000‑
00000UEE2
XD16AWT‑H0‑0000‑
00000BK2E
XD16AWT‑H0‑0000‑
00000BJ2E
XD16AWT‑H0‑0000‑
00000HJ2E
XD16AWT‑H0‑0000‑
00000BH2E
XD16AWT‑H0‑0000‑
00000HH2E
2E
5700 K
XD16AWT‑H0‑0000‑
00000HG2E
XD16AWT‑H0‑0000‑
00000UF2E
XD16AWT‑H0‑0000‑
00000UE2E
XD16AWT‑H0‑0000‑
00000BK3E
XD16AWT‑H0‑0000‑
00000BJ3E
XD16AWT‑H0‑0000‑
00000BH3E
XD16AWT‑H0‑0000‑
00000HH3E
3e
5000 K
XD16AWT‑H0‑0000‑
00000HG3E
XD16AWT‑H0‑0000‑
00000HF3E
XD16AWT‑H0‑0000‑
00000UF3e
XD16AWT‑H0‑0000‑
00000Ue3e
Notꢀ
•
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 25).
•
Cree XLamp XD16 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than
the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions
specified by the order code.
*
Flux values @ 25 °C are calculated and for reference only.
** Flux values @ 700 mA and 1.0 A are calculated and for reference only.
Copyright © 2017-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
4
XLamp® XD16 LED
FLuX ChAꢀACtEꢀiꢁtiCꢁ (tJ = 85 °C) - CꢀꢁtIꢁꢂed
Calcꢆlaꢃed
Mꢄꢅꢄmꢆm Lꢆmꢄꢅꢇꢆs Flꢆx
Mꢄꢅꢄmꢆm
Luminous Flux (lm)
@ 85 °C**
Cꢂrꢇmaꢃꢄcꢄꢃy
order Cꢇdes
(lm) @ 350 mA
Flꢆx
Flꢆx
Kꢄꢃ
CCt
Cꢇde (lm) @ (lm) @ 700 mA
1.0 A
nꢇ Mꢄꢅꢄmꢆm Cꢀi
70 CRI Minimum
80 CRI Minimum
90 CRI Minimum
85 °C
25 °C*
XD16AWT‑H0‑0000‑
000000KE3
XD16AWT‑H0‑0000‑
00000BKE3
S3
S2
R5
R4
R3
R2
S3
S2
R5
R4
R3
R2
S3
S2
R5
R4
R3
R2
Q5
156
170
287
272
255
239
224
209
287
272
255
239
224
209
287
272
255
239
224
209
197
385
365
343
321
301
281
385
365
343
321
301
281
385
365
343
321
301
281
264
XD16AWT‑H0‑0000‑
000000JE3
XD16AWT‑H0‑0000‑
00000BJE3
148
139
130
122
114
156
148
139
130
122
114
156
148
139
130
122
114
107
162
152
142
133
125
170
162
152
142
133
125
170
162
152
142
133
125
117
XD16AWT‑H0‑0000‑
000000HE3
XD16AWT‑H0‑0000‑
00000BHE3
XD16AWT‑H0‑0000‑
00000HHE3
e3
5000 K
XD16AWT‑H0‑0000‑
00000HGE3
XD16AWT‑H0‑0000‑
00000HFE3
XD16AWT‑H0‑0000‑
00000UFe3
XD16AWT‑H0‑0000‑
00000Uee3
XD16AWT‑H0‑0000‑
000000KF4
XD16AWT‑H0‑0000‑
00000BKF4
XD16AWT‑H0‑0000‑
000000JF4
XD16AWT‑H0‑0000‑
00000BJF4
XD16AWT‑H0‑0000‑
000000HF4
XD16AWT‑H0‑0000‑
00000BHF4
XD16AWT‑H0‑0000‑
00000HHF4
F4
4750K
XD16AWT‑H0‑0000‑
00000HGF4
XD16AWT‑H0‑0000‑
00000HFF4
XD16AWT‑H0‑0000‑
00000UFF4
XD16AWT‑H0‑0000‑
00000UEF4
XD16AWT‑H0‑0000‑
00000BK4E
XD16AWT‑H0‑0000‑
00000BJ4E
XD16AWT‑H0‑0000‑
00000BH4E
XD16AWT‑H0‑0000‑
00000HH4E
XD16AWT‑H0‑0000‑
00000HG4E
4E
4500K
XD16AWT‑H0‑0000‑
00000HF4E
XD16AWT‑H0‑0000‑
00000UF4E
XD16AWT‑H0‑0000‑
00000UE4E
XD16AWT‑H0‑0000‑
00000UD4E
Notꢀ
•
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 25).
•
Cree XLamp XD16 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than
the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions
specified by the order code.
*
Flux values @ 25 °C are calculated and for reference only.
** Flux values @ 700 mA and 1.0 A are calculated and for reference only.
Copyright © 2017-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
5
XLamp® XD16 LED
FLuX ChAꢀACtEꢀiꢁtiCꢁ (tJ = 85 °C) - CꢀꢁtIꢁꢂed
Calcꢆlaꢃed
Mꢄꢅꢄmꢆm Lꢆmꢄꢅꢇꢆs Flꢆx
Mꢄꢅꢄmꢆm
Luminous Flux (lm)
@ 85 °C**
Cꢂrꢇmaꢃꢄcꢄꢃy
order Cꢇdes
(lm) @ 350 mA
Flꢆx
Flꢆx
Kꢄꢃ
CCt
Cꢇde (lm) @ (lm) @ 700 mA
1.0 A
nꢇ Mꢄꢅꢄmꢆm Cꢀi
70 CRI Minimum
80 CRI Minimum
90 CRI Minimum
85 °C
25 °C*
XD16AWT‑H0‑0000‑
000000KE4
XD16AWT‑H0‑0000‑
00000BKE4
S3
S2
R5
R4
R3
R2
Q5
S3
S2
R5
R4
R3
R2
Q5
156
170
287
272
255
239
224
209
197
287
272
255
239
224
209
197
385
365
343
321
301
281
264
385
365
343
321
301
281
264
XD16AWT‑H0‑0000‑
000000JE4
XD16AWT‑H0‑0000‑
00000BJE4
148
139
130
122
114
107
156
148
139
130
122
114
107
162
152
142
133
125
117
170
162
152
142
133
125
117
XD16AWT‑H0‑0000‑
000000HE4
XD16AWT‑H0‑0000‑
00000BHE4
XD16AWT‑H0‑0000‑
00000HHE4
XD16AWT‑H0‑0000‑
00000HGE4
E4
4500 K
XD16AWT‑H0‑0000‑
00000HFE4
XD16AWT‑H0‑0000‑
00000UFE4
XD16AWT‑H0‑0000‑
00000UEE4
XD16AWT‑H0‑0000‑
00000UDE4
XD16AWT‑H0‑0000‑
000000KF5
XD16AWT‑H0‑0000‑
00000BKF5
XD16AWT‑H0‑0000‑
000000JF5
XD16AWT‑H0‑0000‑
00000BJF5
XD16AWT‑H0‑0000‑
000000HF5
XD16AWT‑H0‑0000‑
00000BHF5
XD16AWT‑H0‑0000‑
00000HHF5
XD16AWT‑H0‑0000‑
00000HGF5
F5
4200 K
XD16AWT‑H0‑0000‑
00000HFF5
XD16AWT‑H0‑0000‑
00000UFF5
XD16AWT‑H0‑0000‑
00000UeF5
XD16AWT‑H0‑0000‑
00000UDF5
Notꢀ
•
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 25).
•
Cree XLamp XD16 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than
the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions
specified by the order code.
*
Flux values @ 25 °C are calculated and for reference only.
** Flux values @ 700 mA and 1.0 A are calculated and for reference only.
Copyright © 2017-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
6
XLamp® XD16 LED
FLuX ChAꢀACtEꢀiꢁtiCꢁ (tJ = 85 °C) - CꢀꢁtIꢁꢂed
Calcꢆlaꢃed
Mꢄꢅꢄmꢆm Lꢆmꢄꢅꢇꢆs Flꢆx
Mꢄꢅꢄmꢆm
Luminous Flux (lm)
@ 85 °C**
Cꢂrꢇmaꢃꢄcꢄꢃy
order Cꢇdes
(lm) @ 350 mA
Flꢆx
Flꢆx
Kꢄꢃ
CCt
Cꢇde (lm) @ (lm) @ 700 mA
1.0 A
nꢇ Mꢄꢅꢄmꢆm Cꢀi
70 CRI Minimum
80 CRI Minimum
90 CRI Minimum
85 °C
25 °C*
XD16AWT‑H0‑0000‑
00000BK5E
S3
S2
R5
R4
R3
R2
Q5
R5
R4
R3
R2
Q5
S3
S2
R5
R4
R3
R2
Q5
156
170
287
272
255
239
224
209
197
255
239
224
209
197
287
272
255
239
224
209
197
385
365
343
321
301
281
264
343
321
301
281
264
385
365
343
321
301
281
264
XD16AWT‑H0‑0000‑
00000BJ5E
148
139
130
122
114
107
139
130
122
114
107
156
148
139
130
122
114
107
162
152
142
133
125
117
152
142
133
125
117
170
162
152
142
133
125
117
XD16AWT‑H0‑0000‑
00000BH5E
XD16AWT‑H0‑0000‑
00000HH5E
XD16AWT‑H0‑0000‑
00000HG5E
5e
4000 K
XD16AWT‑H0‑0000‑
00000HF5E
XD16AWT‑H0‑0000‑
00000UF5e
XD16AWT‑H0‑0000‑
00000Ue5e
XD16AWT‑H0‑0000‑
00000UD5e
XD16AWT‑H0‑0000‑
00000HH5G
XD16AWT‑H0‑0000‑
00000HG5G
XD16AWT‑H0‑0000‑
00000HF5G
XD16AWT‑H0‑0000‑
00000UF5G
5G
4000 K
XD16AWT‑H0‑0000‑
00000UE5G
XD16AWT‑H0‑0000‑
00000UD5G
XD16AWT‑H0‑0000‑
000000KE5
XD16AWT‑H0‑0000‑
00000BKE5
XD16AWT‑H0‑0000‑
000000JE5
XD16AWT‑H0‑0000‑
00000BJE5
XD16AWT‑H0‑0000‑
000000HE5
XD16AWT‑H0‑0000‑
00000BHE5
XD16AWT‑H0‑0000‑
00000HHE5
XD16AWT‑H0‑0000‑
00000HGE5
e5
4000 K
XD16AWT‑H0‑0000‑
00000HFE5
XD16AWT‑H0‑0000‑
00000UFe5
XD16AWT‑H0‑0000‑
00000Uee5
XD16AWT‑H0‑0000‑
00000UDe5
Notꢀ
•
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 25).
•
Cree XLamp XD16 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than
the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions
specified by the order code.
*
Flux values @ 25 °C are calculated and for reference only.
** Flux values @ 700 mA and 1.0 A are calculated and for reference only.
Copyright © 2017-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
7
XLamp® XD16 LED
FLuX ChAꢀACtEꢀiꢁtiCꢁ (tJ = 85 °C) - CꢀꢁtIꢁꢂed
Calcꢆlaꢃed
Mꢄꢅꢄmꢆm Lꢆmꢄꢅꢇꢆs Flꢆx
Mꢄꢅꢄmꢆm
Luminous Flux (lm)
@ 85 °C**
Cꢂrꢇmaꢃꢄcꢄꢃy
order Cꢇdes
(lm) @ 350 mA
Flꢆx
Flꢆx
Kꢄꢃ
CCt
Cꢇde (lm) @ (lm) @ 700 mA
1.0 A
nꢇ Mꢄꢅꢄmꢆm Cꢀi
70 CRI Minimum
80 CRI Minimum
90 CRI Minimum
85 °C
25 °C*
XD16AWT‑H0‑0000‑
000000JF6
XD16AWT‑H0‑0000‑
00000BJF6
S2
R5
R4
R3
R2
Q5
S2
R5
R4
R3
R2
Q5
R5
R4
R3
R2
Q5
148
162
272
255
239
224
209
197
272
255
239
224
209
197
255
239
224
209
197
365
343
321
301
281
264
365
343
321
301
281
264
343
321
301
281
264
XD16AWT‑H0‑0000‑
000000HF6
XD16AWT‑H0‑0000‑
00000BHF6
XD16AWT‑H0‑0000‑
00000HHF6
139
130
122
114
107
148
139
130
122
114
107
139
130
122
114
107
152
142
133
125
117
162
152
142
133
125
117
152
142
133
125
117
XD16AWT‑H0‑0000‑
00000HGF6
F6
3700 K
XD16AWT‑H0‑0000‑
00000HFF6
XD16AWT‑H0‑0000‑
00000UeF6
XD16AWT‑H0‑0000‑
00000UDF6
XD16AWT‑H0‑0000‑
00000BJ6E
XD16AWT‑H0‑0000‑
00000BH6E
XD16AWT‑H0‑0000‑
00000HH6E
XD16AWT‑H0‑0000‑
00000HG6E
6e
3500 K
XD16AWT‑H0‑0000‑
00000HF6E
XD16AWT‑H0‑0000‑
00000Ue6e
XD16AWT‑H0‑0000‑
00000UD6e
XD16AWT‑H0‑0000‑
00000HH6G
XD16AWT‑H0‑0000‑
00000HG6G
XD16AWT‑H0‑0000‑
00000HF6G
6G
3500 K
XD16AWT‑H0‑0000‑
00000UE6G
XD16AWT‑H0‑0000‑
00000UD6G
Notꢀ
•
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 25).
•
Cree XLamp XD16 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than
the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions
specified by the order code.
*
Flux values @ 25 °C are calculated and for reference only.
** Flux values @ 700 mA and 1.0 A are calculated and for reference only.
Copyright © 2017-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
8
XLamp® XD16 LED
FLuX ChAꢀACtEꢀiꢁtiCꢁ (tJ = 85 °C) - CꢀꢁtIꢁꢂed
Calcꢆlaꢃed
Mꢄꢅꢄmꢆm Lꢆmꢄꢅꢇꢆs Flꢆx
Mꢄꢅꢄmꢆm
Luminous Flux (lm)
@ 85 °C**
Cꢂrꢇmaꢃꢄcꢄꢃy
order Cꢇdes
(lm) @ 350 mA
Flꢆx
Flꢆx
Kꢄꢃ
CCt
Cꢇde (lm) @ (lm) @ 700 mA
1.0 A
nꢇ Mꢄꢅꢄmꢆm Cꢀi
70 CRI Minimum
80 CRI Minimum
90 CRI Minimum
85 °C
25 °C*
XD16AWT‑H0‑0000‑
000000JE6
XD16AWT‑H0‑0000‑
00000BJE6
S2
R5
R4
R3
R2
Q5
S2
R5
R4
R3
R2
Q5
S2
R5
R4
R3
R2
Q5
148
162
272
255
239
224
209
197
272
255
239
224
209
197
272
255
239
224
209
197
365
343
321
301
281
264
365
343
321
301
281
264
365
343
321
301
281
264
XD16AWT‑H0‑0000‑
000000HE6
XD16AWT‑H0‑0000‑
00000BHE6
XD16AWT‑H0‑0000‑
00000HHE6
139
130
122
114
107
148
139
130
122
114
107
148
139
130
122
114
107
152
142
133
125
117
162
152
142
133
125
117
162
152
142
133
125
117
XD16AWT‑H0‑0000‑
00000HGE6
e6
3500 K
XD16AWT‑H0‑0000‑
00000HFE6
XD16AWT‑H0‑0000‑
00000Uee6
XD16AWT‑H0‑0000‑
00000UDe6
XD16AWT‑H0‑0000‑
000000JF7
XD16AWT‑H0‑0000‑
00000BJF7
XD16AWT‑H0‑0000‑
000000HF7
XD16AWT‑H0‑0000‑
00000BHF7
XD16AWT‑H0‑0000‑
000000GF7
XD16AWT‑H0‑0000‑
00000BGF7
XD16AWT‑H0‑0000‑
00000HGF7
F7
3200 K
XD16AWT‑H0‑0000‑
00000HFF7
XD16AWT‑H0‑0000‑
00000HEF7
XD16AWT‑H0‑0000‑
00000UeF7
XD16AWT‑H0‑0000‑
00000UDF7
XD16AWT‑H0‑0000‑
00000BJ7E
XD16AWT‑H0‑0000‑
00000BH7E
XD16AWT‑H0‑0000‑
00000BG7E
XD16AWT‑H0‑0000‑
00000HG7E
7e
3000 K
XD16AWT‑H0‑0000‑
00000HF7E
XD16AWT‑H0‑0000‑
00000HE7E
XD16AWT‑H0‑0000‑
00000Ue7e
XD16AWT‑H0‑0000‑
00000UD7e
Notꢀ
•
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 25).
•
Cree XLamp XD16 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than
the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions
specified by the order code.
*
Flux values @ 25 °C are calculated and for reference only.
** Flux values @ 700 mA and 1.0 A are calculated and for reference only.
Copyright © 2017-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
9
XLamp® XD16 LED
FLuX ChAꢀACtEꢀiꢁtiCꢁ (tJ = 85 °C) - CꢀꢁtIꢁꢂed
Calcꢆlaꢃed
Mꢄꢅꢄmꢆm Lꢆmꢄꢅꢇꢆs Flꢆx
Mꢄꢅꢄmꢆm
Luminous Flux (lm)
@ 85 °C**
Cꢂrꢇmaꢃꢄcꢄꢃy
order Cꢇdes
(lm) @ 350 mA
Flꢆx
Flꢆx
Kꢄꢃ
CCt
Cꢇde (lm) @ (lm) @ 700 mA
1.0 A
nꢇ Mꢄꢅꢄmꢆm Cꢀi
70 CRI Minimum
80 CRI Minimum
90 CRI Minimum
85 °C
25 °C*
XD16AWT‑H0‑0000‑
00000HG7G
R4
R3
R2
Q5
S2
R5
R4
R3
R2
Q5
R4
R3
R2
Q5
Q4
Q3
130
142
239
224
209
197
272
255
239
224
209
197
239
224
209
197
184
172
321
301
281
264
365
343
321
301
281
264
321
301
281
264
247
232
XD16AWT‑H0‑0000‑
00000HF7G
122
114
107
148
139
130
122
114
107
130
122
114
107
100
93.9
133
125
117
162
152
142
133
125
117
142
133
125
117
109
103
7G
3000 K
XD16AWT‑H0‑0000‑
00000HE7G
XD16AWT‑H0‑0000‑
00000UE7G
XD16AWT‑H0‑0000‑
00000UD7G
XD16AWT‑H0‑0000‑
000000JE7
XD16AWT‑H0‑0000‑
00000BJE7
XD16AWT‑H0‑0000‑
000000HE7
XD16AWT‑H0‑0000‑
00000BHE7
XD16AWT‑H0‑0000‑
000000GE7
XD16AWT‑H0‑0000‑
00000BGE7
XD16AWT‑H0‑0000‑
00000HGE7
e7
3000 K
XD16AWT‑H0‑0000‑
00000HFE7
XD16AWT‑H0‑0000‑
00000HEE7
XD16AWT‑H0‑0000‑
00000Uee7
XD16AWT‑H0‑0000‑
00000UDe7
XD16AWT‑H0‑0000‑
00000HGF8
XD16AWT‑H0‑0000‑
00000HFF8
XD16AWT‑H0‑0000‑
00000HEF8
F8
2850 K
XD16AWT‑H0‑0000‑
00000UDF8
XD16AWT‑H0‑0000‑
00000UCF8
XD16AWT‑H0‑0000‑
00000UBF8
Notꢀ
•
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 25).
•
Cree XLamp XD16 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than
the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions
specified by the order code.
*
Flux values @ 25 °C are calculated and for reference only.
** Flux values @ 700 mA and 1.0 A are calculated and for reference only.
Copyright © 2017-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
10
XLamp® XD16 LED
FLuX ChAꢀACtEꢀiꢁtiCꢁ (tJ = 85 °C) - CꢀꢁtIꢁꢂed
Calcꢆlaꢃed
Mꢄꢅꢄmꢆm Lꢆmꢄꢅꢇꢆs Flꢆx
Mꢄꢅꢄmꢆm
Luminous Flux (lm)
@ 85 °C**
Cꢂrꢇmaꢃꢄcꢄꢃy
order Cꢇdes
(lm) @ 350 mA
Flꢆx
Flꢆx
Kꢄꢃ
CCt
Cꢇde (lm) @ (lm) @ 700 mA
1.0 A
nꢇ Mꢄꢅꢄmꢆm Cꢀi
70 CRI Minimum
80 CRI Minimum
90 CRI Minimum
85 °C
25 °C*
XD16AWT‑H0‑0000‑
00000HG8E
R4
R3
R2
Q5
Q4
Q3
R4
R3
R2
Q5
Q4
Q3
R4
R3
R2
Q5
Q4
Q3
130
142
239
224
209
197
184
172
239
224
209
197
184
172
239
224
209
197
184
172
321
301
281
264
247
232
321
301
281
264
247
232
321
301
281
264
247
232
XD16AWT‑H0‑0000‑
00000HF8E
122
114
107
100
93.9
130
122
114
107
100
93.9
130
122
114
107
100
93.9
133
125
117
109
103
142
133
125
117
109
103
142
133
125
117
109
103
XD16AWT‑H0‑0000‑
00000HE8E
8E
2700 K
XD16AWT‑H0‑0000‑
00000UD8E
XD16AWT‑H0‑0000‑
00000UC8E
XD16AWT‑H0‑0000‑
00000UB8E
XD16AWT‑H0‑0000‑
00000HG8G
XD16AWT‑H0‑0000‑
00000HF8G
XD16AWT‑H0‑0000‑
00000HE8G
8G
2700 K
XD16AWT‑H0‑0000‑
00000UD8G
XD16AWT‑H0‑0000‑
00000UC8G
XD16AWT‑H0‑0000‑
00000UB8G
XD16AWT‑H0‑0000‑
00000HGE8
XD16AWT‑H0‑0000‑
00000HFE8
XD16AWT‑H0‑0000‑
00000HEE8
E8
2700K
XD16AWT‑H0‑0000‑
00000UDE8
XD16AWT‑H0‑0000‑
00000UCE8
XD16AWT‑H0‑0000‑
00000UBE8
Notꢀ
•
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 25).
•
Cree XLamp XD16 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than
the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions
specified by the order code.
*
Flux values @ 25 °C are calculated and for reference only.
** Flux values @ 700 mA and 1.0 A are calculated and for reference only.
Copyright © 2017-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
11
XLamp® XD16 LED
ꢀELAtivE ꢁPECtꢀAL PowEꢀ Diꢁtꢀibution
100%
80%
60%
40%
20%
0%
6500 K, 67 CRI
3000 K, 80 CRI
380
430
480
530
580
630
680
730
780
Wavelength (nm)
ꢀELAtivE FLuX vꢁ. JunCtion tEMPEꢀAtuꢀE (iF = 350 mA)
120%
100%
80%
60%
40%
20%
0%
25
50
75
100
125
150
Junction Temperature (ºC)
Copyright © 2017-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
12
XLamp® XD16 LED
ELECtꢀiCAL ChAꢀACtEꢀiꢁtiCꢁ (tJ = 85 °C)
2000
1750
1500
1250
1000
750
500
250
0
2.40
2.50
2.60
2.70
2.80
2.90
3.00
3.10
Forward Voltage (V)
ꢀELAtivE FLuX vꢁ. CuꢀꢀEnt (tJ = 85 °C)
450%
400%
350%
300%
250%
200%
150%
100%
50%
0%
0
250
500
750
1000
1250
1500
1750
2000
Forward Current (mA)
Copyright © 2017-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
13
XLamp® XD16 LED
ꢀELAtivE ChꢀoMAtiCitꢈ vꢁ. CuꢀꢀEnt AnD tEMPEꢀAtuꢀE
0.020
0.015
0.010
0.005
0.000
-0.005
-0.010
-0.015
-0.020
ΔCCx
ΔCCy
0
250
500
750
1000
1250
1500
1750
2000
Current (mA)
0.020
0.015
0.010
0.005
0.000
-0.005
-0.010
-0.015
-0.020
ΔCCx
ΔCCy
0
25
50
75
100
125
150
Tsp (°C)
Copyright © 2017-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
14
XLamp® XD16 LED
tꢈPiCAL ꢁPAtiAL Diꢁtꢀibution
100%
80%
60%
40%
20%
0%
-10
-90
-70
-50
-30
10
30
50
70
90
Angle (º)
thEꢀMAL DEꢁign
The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is crucial for the end
product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life
and optical characteristics.
2250
2000
1750
1500
1250
1000
Rj-a = 10°C/W
Rj-a = 15°C/W
Rj-a = 20°C/W
Rj-a = 25°C/W
750
500
250
0
0
20
40
60
80
100
120
140
160
Ambient Temperature (ºC)
Copyright © 2017-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
15
XLamp® XD16 LED
PeRFꢀRMAꢁCe GRꢀꢂPꢃ - LꢂMIꢁꢀꢂꢃ FLꢂꢄ (tJ = 85 °C)
XLamp XD16 LEDs are tested for luminous flux and placed into one of the following luminous‑flux groups. The group codes, with a zero
appended, are used in the bin code “Luminous flux group.” The flux groups are used in the order code “Minimum luminous flux group
code.”
Mꢄꢅꢄmꢆm Lꢆmꢄꢅꢇꢆs Flꢆx
Maxꢄmꢆm Lꢆmꢄꢅꢇꢆs Flꢆx
grꢇꢆp Cꢇde
Flꢆx grꢇꢆp
(lm) @ 350 mA
(lm) @ 350 mA
Q3
Q4
Q5
R2
R3
R4
R5
S2
S3
S4
B
C
D
e
F
93.9
100
107
114
122
130
139
148
156
164
100
107
114
122
130
139
148
156
164
172
G
H
J
K
L
PeRFꢀRMAꢁCe GRꢀꢂPꢃ - ChRꢀMAtICIty
XLamp XD16 LEDs are tested for chromaticity and placed into one of the regions defined by the following bounding coordinates.
ꢀeꢉꢄꢇꢅ
x
y
ꢀeꢉꢄꢇꢅ
x
y
ꢀeꢉꢄꢇꢅ
x
y
ꢀeꢉꢄꢇꢅ
x
y
0.2950
0.2970
0.2920
0.3060
0.2984
0.3133
0.2984
0.3133
0.2920
0.2984
0.3009
0.2980
0.2950
0.3009
0.3037
0.3048
0.3130
0.3144
0.3068
0.3068
0.3144
0.3161
0.3093
0.3060
0.3133
0.3042
0.2880
0.2970
0.3042
0.2937
0.3207
0.3290
0.3186
0.3113
0.3113
0.3186
0.3059
0.2993
0.2895
0.2962
0.2984
0.2895
0.2870
0.2937
0.2962
0.3028
0.3115
0.3130
0.3048
0.3005
0.3099
0.3115
0.3028
0.3135
0.3220
0.3133
0.3135
0.3210
0.3312
0.3220
0.3304
0.3391
0.3290
0.3207
0.3415
0.3509
0.3391
0.3304
0.2962
0.3028
0.3048
0.2962
0.2937
0.3005
0.3028
0.3115
0.3205
0.3213
0.3130
0.3099
0.3196
0.3205
0.3115
0.3220
0.3304
0.3207
0.3220
0.3312
0.3415
0.3304
0.3391
0.3481
0.3373
0.3290
0.3509
0.3602
0.3481
0.3391
0.3048
0.3068
0.3009
0.3037
0.3009
0.3068
0.3093
0.3130
0.3213
0.3221
0.3144
0.3144
0.3221
0.3231
0.3161
0.3207
0.3113
0.3042
0.2937
0.3042
0.3113
0.2993
0.3290
0.3373
0.3261
0.3186
0.3186
0.3261
0.3120
0.3059
0A
0B
0C
0D
0R
1A
1R
0S
1B
1S
0T
1C
1T
0U
1D
1U
Copyright © 2017-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
16
XLamp® XD16 LED
PeRFꢀRMAꢁCe GRꢀꢂPꢃ - ChRꢀMAtICIty (CꢀꢁtIꢁꢂed)
ꢀeꢉꢄꢇꢅ
x
y
ꢀeꢉꢄꢇꢅ
x
y
ꢀeꢉꢄꢇꢅ
x
y
ꢀeꢉꢄꢇꢅ
x
y
0.3215
0.3350
0.3207
0.3462
0.3290
0.3538
0.3290
0.3417
0.3290
0.3290
0.3222
0.3222
0.3290
0.3290
0.3231
0.3371
0.3451
0.3440
0.3366
0.3530
0.3615
0.3590
0.3512
0.3670
0.3702
0.3825
0.3783
0.3889
0.3941
0.4080
0.4017
0.4221
0.4342
0.426
0.3417
0.3300
0.3243
0.3243
0.3300
0.3180
0.3120
0.3490
0.3554
0.3427
0.3369
0.3597
0.3659
0.3521
0.3465
0.3578
0.3722
0.3798
0.3646
0.3690
0.3848
0.3916
0.3751
0.3985
0.4028
0.3853
0.3814
0.4071
0.4099
0.3918
0.3893
0.3290
0.3290
0.3215
0.3196
0.3290
0.3290
0.3207
0.3376
0.3463
0.3451
0.3371
0.3548
0.3641
0.3615
0.3530
0.3702
0.3736
0.3869
0.3825
0.3941
0.3996
0.4146
0.4080
0.4299
0.443
0.3538
0.3417
0.3350
0.3602
0.3690
0.3538
0.3462
0.3616
0.3687
0.3554
0.3490
0.3736
0.3804
0.3659
0.3597
0.3722
0.3874
0.3958
0.3798
0.3848
0.4015
0.4089
0.3916
0.4165
0.4212
0.4028
0.3985
0.4260
0.4289
0.4099
0.4071
0.3376
0.3371
0.3290
0.3290
0.3381
0.3376
0.3290
0.3463
0.3551
0.3533
0.3451
0.3641
0.3736
0.3702
0.3615
0.3825
0.3869
0.4006
0.3950
0.4080
0.4146
0.4299
0.4221
0.4430
0.4562
0.4465
0.4342
0.4687
0.4813
0.4700
0.4582
0.3616
0.3490
0.3417
0.3690
0.3762
0.3616
0.3538
0.3687
0.3760
0.3620
0.3554
0.3804
0.3874
0.3722
0.3659
0.3798
0.3958
0.4044
0.3875
0.3916
0.4089
0.4165
0.3984
0.4212
0.4260
0.4071
0.4028
0.4289
0.4319
0.4126
0.4099
0.3371
0.3366
0.3290
0.3290
0.3366
0.3361
0.3290
0.3451
0.3533
0.3515
0.3440
0.3615
0.3702
0.3670
0.3590
0.3783
0.3825
0.3950
0.3898
0.4017
0.4080
0.4221
0.4147
0.4342
0.4465
0.4373
0.4260
0.4582
0.4700
0.4593
0.4483
0.3490
0.3369
0.3300
0.3300
0.3369
0.3245
0.3180
0.3554
0.3620
0.3487
0.3427
0.3659
0.3722
0.3578
0.3521
0.3646
0.3798
0.3875
0.3716
0.3751
0.3916
0.3984
0.3814
0.4028
0.4071
0.3893
0.3853
0.4099
0.4126
0.3944
0.3918
2A
2B
2C
2D
2R
3A
4A
5A
6A
7A
8A
2S
3B
4B
5B
6B
7B
8B
2T
3C
4C
5C
6C
7C
8C
2U
3D
4D
5D
6D
7D
8D
0.4342
0.4221
0.4562
0.4687
0.4582
0.4465
0.4147
0.4465
0.4582
0.4483
0.4373
Copyright © 2017-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
17
XLamp® XD16 LED
PeRFꢀRMAꢁCe GRꢀꢂPꢃ - ChRꢀMAtICIty (CꢀꢁtIꢁꢂed)
easꢅWꢆiꢇꢈ Color tꢈmpꢈraꢇurꢈs – 3-ꢃꢇꢈp ellipsꢈ
Ceꢅꢃer Pꢇꢄꢅꢃ
Majꢇr Axꢄs
a
Mꢄꢅꢇr Axꢄs
ꢊ
ꢀꢇꢃaꢃꢄꢇꢅ Aꢅꢉle
bꢄꢅ Cꢇde
CCt
(°)
x
y
5G
6G
7G
8G
4000 K
3500 K
3000 K
2700 K
0.3818
0.3797
0.0094
0.0093
0.0083
0.0081
0.0040
0.0041
0.0041
0.0042
53.72
53.22
53.20
53.70
0.4073
0.4338
0.4578
0.3917
0.4030
0.4101
easꢅWꢆiꢇꢈ Color tꢈmpꢈraꢇurꢈs – 5-ꢃꢇꢈp ellipsꢈ
Ceꢅꢃer Pꢇꢄꢅꢃ
Majꢇr Axꢄs
a
Mꢄꢅꢇr Axꢄs
ꢊ
ꢀꢇꢃaꢃꢄꢇꢅ Aꢅꢉle
bꢄꢅ Cꢇde
CCt
(°)
x
y
2E
3e
4E
5e
6e
7e
8E
5700 K
5000 K
4500 K
4000 K
3500 K
3000 K
2700 K
0.3287
0.3417
0.01230
0.01400
0.01420
0.01565
0.01545
0.01390
0.01350
0.00600
0.00520
0.00550
0.00670
0.00690
0.00680
0.00700
72.0
65.0
61.5
53.7
54.0
53.2
48.5
0.3447
0.3611
0.3818
0.4073
0.4338
0.4577
0.3553
0.3658
0.3797
0.3917
0.4030
0.4099
Copyright © 2017-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
18
XLamp® XD16 LED
CꢀEE’ꢁ CooL whitE Kitꢁ PLottED on Anꢁi ꢁtAnDAꢀD ChꢀoMAtiCitꢈ ꢀEgionꢁ
0.40
0.39
0.38
0.37
0.36
0.35
0.34
0.33
0.32
0.31
0.30
0.29
0.28
0.40
0.39
0.38
0.37
0.36
0.35
0.34
0.33
0.32
0.31
0.30
0.29
0.28
5000 K
5000 K
5700 K
5700 K
DV
6500 K
6500 K
2T
2T
2S
2S
2C
2D
2C
2D
1T
1T
DT
8000 K
8000 K
2B
2B
1S
1S
1C
1C
2A
2R
2A
2R
0T
0T
1B
1B
1D
1D
2U
2U
0S
0S
0C
0C
ANSI
C78.377A
ANSI
C78.377A
1A
1A
1U
1U
0B
0B
0D
0D
1R
1R
0A
0A
0U
0U
0R
0R
CCx
CCx
0.40
0.39
0.38
0.37
0.36
0.35
0.34
0.33
0.32
0.31
0.30
0.29
0.28
5000 K
5700 K
3S
6500 K
50
2T
3B
2S
2C
2D
1T
3A
8000 K
2B
1S
1C
3R
2A
2R
0T
1B
1D
2U
0S
0C
ANSI
C78.377A
1A
1U
0B
0D
1R
0A
0U
0R
CCx
0.40
0.39
0.38
0.37
0.36
0.35
0.34
0.33
0.32
0.31
0.30
0.29
0.28
0.40
0.39
0.38
0.37
0.36
0.35
0.34
0.33
0.32
0.31
0.30
0.29
0.28
5000 K
5000 K
5700 K
5700 K
3S
3S
E2
6500 K
6500 K
2T
2T
3B
3B
2S
2S
E1
2C
2C
2D
1T
1T
3A
3A
8000 K
8000 K
2B
2A
2R
2B
1S
1S
2D
1C
1C
3R
3R
2A
2R
0T
0T
1B
1B
1D
2U
2U
1D
0S
0C
0S
0C
ANSI
C78.377A
ANSI
C78.377A
1A
1A
1U
1U
0B
0B
0D
0D
1R
1R
0A
0A
0U
0U
0R
0R
CCx
CCx
Copyright © 2017-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
19
XLamp® XD16 LED
CꢀEE’ꢁ wAꢀM AnD nEutꢀAL whitE Kitꢁ PLottED on Anꢁi ꢁtAnDAꢀD ChꢀoMAtiCitꢈ ꢀEgionꢁ
0.45
0.44
0.43
0.42
0.41
0.40
0.39
0.38
0.37
0.36
0.35
0.34
0.33
E8 2700 K
3000 K
E7
8C
8B
3500 K
7C
7B
E6
4000 K
6C
8D
8A
E5
6B
7D
4500 K
7A
5C
5000 K
6D
5B
E4
6A
ANSI
C78.377A
4C
5D
E3
4B
5A
3C
4D
3B
4A
3D
3A
CCx
0.45
0.44
0.43
0.42
0.41
0.40
0.39
0.38
0.37
0.36
0.35
0.34
0.33
2700 K
3000 K F8
F7
8B
3500 K
7C
7B
F6
4000 K
6C
8A
6B
7D
4500 K F5
7A
5C
5000 K
6D
5B
6A
F4
ANSI
C78.377A
4C
5D
4B
5A
3C
4D
4A
3D
CCx
Copyright © 2017-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
20
XLamp® XD16 LED
CꢀEE’ꢁ EAꢁꢈwhitE® whitE Kitꢁ PLottED on Anꢁi ꢁtAnDAꢀD ChꢀoMAtiCitꢈ ꢀEgionꢁ
0.44
2700 K
ANSI C78.377 Quadrangle
3000 K
0.43
0.42
0.41
0.40
0.39
0.38
0.37
0.36
0.35
0.34
0.33
0.32
0.31
EasyWhite 5-Step
EasyWhite 3-Step
3500 K
4000 K
4500 K
5000 K
5700 K
CCx
Copyright © 2017-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
21
XLamp® XD16 LED
CꢀEE’ꢁ ꢁtAnDAꢀD ChꢀoMAtiCitꢈ Kitꢁ
The following table provides the chromaticity bins associated with chromaticity kits for XD16 LEDs.
Cꢇlꢇr
CCt
Kꢄꢃ
Cꢂrꢇmaꢃꢄcꢄꢃy bꢄꢅs
7000 K
DT
0A, 0B, 0C, 0D, 0R, 0S, 0T, 0U, 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U
6500 K
6200 K
6000 K
5700 K
5700 K
5000 K
5000 K
4750 K
4500 K
4500 K
4250 K
4000 K
4000 K
4000 K
3750 K
3500 K
3500 K
3500 K
3250 K
3000 K
3000 K
3000 K
2850 K
2700 K
2700 K
2700 K
e1
50
Dv
E2
2E
3e
e3
F4
4E
E4
F5
5e
5G
e5
F6
6e
6G
e6
F7
7e
7G
e7
F8
8E
8G
E8
1A, 1B, 1C, 1D
1A, 1B, 1C, 1D, 2A, 2B, 2C, 2D
Cool
White
1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 2U
2A, 2B, 2C, 2D
57e
50e
3A, 3B, 3C, 3D
3C, 3D, 4A, 4B
45E
Neutral
White
4A, 4B, 4C, 4D
4C, 4D, 5A, 5B
40E, 40G
40G
5A 5B, 5C, 5D
5C, 5D, 6A, 6B
35E, 35G
35G
6A, 6B, 6C, 6D
6C, 6D, 7A, 7B
30E, 30G
Warm
White
30G
7A, 7B, 7C, 7D
7C, 7D, 8A, 8B
27E, 27G
27G
8A, 8B, 8C, 8D
Copyright © 2017-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
22
XLamp® XD16 LED
bin AnD oꢀDEꢀ CoDE FoꢀMAtꢁ
Bin codes and order codes for XD16 LEDs are configured in the following manner:
order Cꢇde
bꢄꢅ Cꢇde
Series
XD16
Series
XD16
Configuration
B: CIass
H = Default
D: Reel size
0 = Default
Internal code
Luminous flux group
Color specification
0 = No minimum CRI
B = 70 CRI minimum
H = 80 CRI minimum
U = 90 CRI minimum
Voltage group code
Minimum luminous flux group code
SSSSCCC-D-HHH-FFF-VR-AAAA
SSSSCCC-DD-NNNN-NNNNVRFGG
Internal code
Chromaticity kit
Voltage group code
Chromaticity group
Color specification
0 = No minimum CRI
B = 70 CRI minimum
H = 80 CRI minimum
U = 90 CRI minimum
Color
AWT = White
Internal code
Color
AWT = White
Copyright © 2017-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
23
XLamp® XD16 LED
ꢀEFLow ꢁoLDEꢀing ChAꢀACtEꢀiꢁtiCꢁ
In testing, Cree has found XLamp XD16 LEDs to be compatible with JEDEC J‑STD‑020C, using the parameters listed below. As a general
guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of the solder paste used,
and therefore it is the lamp or luminaire manufacturer’s responsibility to determine applicable soldering requirements.
Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment.
tP
Critical Zone
TL to TP
TP
Ramp-up
TL
tS
Tsmax
Tsmin
Ramp-down
ts
Preheat
25
t 25˚C to Peak
IPC/JEDEC J‑STD‑020C
Time
Prꢇfꢄle Feaꢃꢆre
Lꢈaꢉ-Frꢈꢈ ꢃolꢉꢈr
Average Ramp‑Up Rate (Tsmax to Tp)
1.2 °C/second
120 °C
Preheat: Temperature Min (Tsmin
Preheat: Temperature Max (Tsmax
Preheat: Time (Tsmin to Tsmax
)
)
170 °C
65-150 sꢀconds
217 °C
)
Time Maintained Above: Temperature (TL)
Time Maintained Above: Time (tL)
45‑90 seconds
Peak/Classification Temperature (Tp)
235 ‑ 245 °C
Time Within 5 °C of Actual Peak Temperature (tp)
Ramp‑Down Rate
20‑40 seconds
1 ‑ 6 °C/second
4 minutes max.
Time 25 °C to Peak Temperature
Note: All temperatures refer to topside of the package, measured on the package body surface.
Copyright © 2017-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
24
XLamp® XD16 LED
notEꢁ
Measꢆremeꢅꢃs
The luminous flux, radiant power, chromaticity, forward voltage and CRI measurements in this document are binning specifications only
and solely represent product measurements as of the date of shipment. These measurements will change over time based on a number
of factors that are not within Cree’s control and are not intended or provided as operational specifications for the products. Calculated
values are provided for informational purposes only and are not intended or provided as specifications.
Prꢈ-Rꢈlꢈasꢈ Qualificaꢇion tꢈsꢇing
Please read the LED Reliability Overview for details of the qualification process Cree applies to ensure long‑term reliability for XLamp
LEDs and details of Cree’s pre‑release qualification testing for XLamp LEDs. Cree did not perform Room Temperature Operating Life
(RTOL) testing on the XD16 LED.
Lꢆmeꢅ Maꢄꢅꢃeꢅaꢅce
Cree now uses standardized IES LM‑80‑08 and TM‑21‑11 methods for collecting long‑term data and extrapolating LED lumen maintenance.
For information on the specific LM‑80 data sets available for this LED, refer to the public LM‑80 results document.
Please read the Long‑Term Lumen Maintenance application note for more details on Cree’s lumen maintenance testing and forecasting.
Please read the Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect
the LED junction temperature.
Mꢇꢄsꢃꢆre ꢁeꢅsꢄꢃꢄꢋꢄꢃy
Cree recommends keeping XLamp LEDs in the provided, resealable moisture‑barrier packaging (MBP) until immediately prior to soldering.
Unopened MBPs that contain XLamp LEDs do not need special storage for moisture sensitivity.
Once the MBP is opened, XLamp XD16 LEDs may be stored as MSL 1 per JEDEC J‑STD‑033, meaning they have unlimited floor life in
conditions of ≤ 30 ºC/85% relative humidity (RH). Regardless of storage condition, Cree recommends sealing any unsoldered LEDs in the
original MBP.
ꢀꢇhꢁ Cꢇmplꢄaꢅce
The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold
limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as
implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product
Ecology section of the Cree website.
ꢀEACꢂ Cꢇmplꢄaꢅce
REACh substances of very high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA)
has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree representative to
insure you get the most up‑to‑date REACh SVHC Declaration. REACh banned substance information (REACh Article 67) is also available
upon request.
Copyright © 2017-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
25
XLamp® XD16 LED
ꢁꢀteꢃ - CꢀꢁtIꢁꢂed
uL® ꢀecꢇꢉꢅꢄzed Cꢇmpꢇꢅeꢅꢃ
This product meets the requirements to be considered a UL Recognized Component with Level 4 enclosure consideration. The LED
package or a portion thereof has not been investigated as a fire enclosure or a fire and electrical enclosure per ANSI/UL 8750.
vꢄsꢄꢇꢅ Adꢋꢄsꢇry
WARNING: Do not look at an exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please
refer to the LED Eye Safety application note.
Copyright © 2017-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
26
XLamp® XD16 LED
MEChAniCAL DiMEnꢁionꢁ
Thermal vias, if present, are not shown on these drawings.
All dimensions in mm.
Measurement tolerances unless indicated otherwise: ±.13 mm
1.50
1.60
.38
.60
OPTICAL
REFERENCE
Anode (+)
1.60
1.50
OPTICAL
REFERENCE
.78
±.10
.30
tꢇp vꢄeꢌ
ꢁꢄde vꢄeꢌ
bꢇꢃꢃꢇm vꢄeꢌ
.60
.50
.3
.40
1.20
1.5
1.40
1.5
ꢀecꢇmmeꢅded PC bꢇard ꢁꢇlder Pad
ꢀecꢇmmeꢅded ꢁꢃeꢅcꢄl Paꢃꢃerꢅ
Copyright © 2017-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
27
XLamp® XD16 LED
tAPE AnD ꢀEEL
All Cree carrier tapes conform to EIA‑481D, Automated Component Handling Systems Standard.
Except as noted, all dimensions in mm [in].
Measurement tolerances unless indicated otherwise: .xx = ±.10 mm
Ø1.50
+.10/-.00
[+.0039/-.0000]
4.00 [.157]
Po
1.75 [.069]
E2
2.00 [.079]
P2
CATHODE SIDE
1.85 [.073]
Bo
8.00 [.315]
NOMINAL
8.30 [.327]
MAX
3.0°
3.50 [.138] F
6.25
[.246]
E2
W
Ø1.00
[.039]
D1
ANODE SIDE
4.00 [.157]
1.98 [.078]
.30 [.012]
T
P
1.20 [.047]
Ko
POCKET SIZE
3.0°
Ao
Bo
Ko
1.85 mm [.073”]
1.85 mm [.073”]
1.20 mm [.047”]
1.85 [.073]
Ao
User Feed Direction
END
START
Loaded Pockets
3,000 Lamps
Trailer
Leader
160 mm (min) of
empty pockets
sealed with tape
(20 pockets min.)
400 mm (min) of
empty pockets with
at least 100 mm
sealed by tape
(50 empty pockets min.)
Copyright © 2017-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
28
XLamp® XD16 LED
PACKAging
The diagrams below show the packaging and labels Cree uses to ship XLamp XD16 LEDs. XLamp XD16 LEDs are shipped in tape loaded
on a reel. Each box contains only one reel in a moisture barrier bag.
Unpackaged Reel
Label with Cree Bin Code,
Quantity, Reel ID
Packaged Reel
Label with Cree Order Code,
Quantity, Reel ID, PO #
Label with Cree Bin Code,
Quantity, Reel ID
Boxed Reel
Label with Cree Order Code,
Quantity, Reel ID, PO #
Label with Cree Bin Code,
Quantity, Reel ID
Patent Label
(on bottom of box)
Copyright © 2017-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
29
相关型号：
XD16AWT-H0-0000-00000UFF4
Cree® XLamp® XD16 LEDsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
CREE
XD16AWT-H0-0000-00000UFF5
Cree® XLamp® XD16 LEDsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
CREE
XD3108
SOUNDERS MECHANICAL BUZZERSWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
DUBILIER
XD41
SOUNDERS MECHANICAL BUZZERSWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
DUBILIER
XD50W-10
Fixed Attenuator, 0MHz Min, 7500MHz Max,Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
APITECH
XD50W-10F
Fixed Attenuator, 0MHz Min, 7500MHz Max,Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
APITECH
XD50W-10M
Fixed Attenuator, 0MHz Min, 7500MHz Max,Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
APITECH
XD50W-20
Fixed Attenuator, 0MHz Min, 7500MHz Max,Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
APITECH
XD50W-20F
Fixed Attenuator, 0MHz Min, 7500MHz Max,Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
APITECH
XD50W-20M
Fixed Attenuator, 0MHz Min, 7500MHz Max,Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
APITECH
XD50W-3
Fixed Attenuator, 0MHz Min, 7500MHz Max,Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
APITECH
XD50W-30
Fixed Attenuator, 0MHz Min, 7500MHz Max,Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
APITECH
©2020 ICPDF网 联系我们和版权申明