XMLAWT-00-0000-000LT20Z7 [CREE]
LED XLAMP WARM WHITE 3000K 2SMD;型号: | XMLAWT-00-0000-000LT20Z7 |
厂家: | CREE, INC |
描述: | LED XLAMP WARM WHITE 3000K 2SMD 光电 |
文件: | 总14页 (文件大小:1006K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Product family data sheet
Cree® XLamp® XM-L LEDs
PꢀoDuCt DEꢁCꢀiPtion
FEAtuꢀEꢁ
tAbLE oF ContEntꢁ
Thꢀ XLamp® XM-L LeD is thꢀ industry’s
highꢀst pꢀrformancꢀ, singlꢀ-diꢀ whitꢀ
lighting-class LeD. Thꢀ XLamp XM-L LeD
is 20% more efficient than the XLamp
XP-G LeD at thꢀ samꢀ currꢀnt, and can
dꢀliꢁꢀr 1000 lumꢀns with 100 lumꢀns pꢀr
wattefficacy.TheXLampXM-LLEDoffers
Crꢀꢀ’s industry-lꢀading fꢀaturꢀs: widꢀ
ꢁiꢀwing anglꢀ, symmꢀtrical packagꢀ,
unlimited floor life and electrically neutral
thꢀrmal path.
•
•
•
Maximum drive current: 3000 mA
Low thermal resistance: 2.5 °C/W
Maximum junction tꢀmpꢀraturꢀ:
150 °C
Charactꢀristics....................................... 2
Flux Charactꢀristics ............................... 3
Rꢀlatiꢁꢀ Spꢀctral Powꢀr Distribution .... 4
Relative Flux vs. Junction
•
•
Viewing angle: 125°
Tꢀmpꢀraturꢀ........................................... 4
elꢀctrical Charactꢀristics....................... 5
Rꢀlatiꢁꢀ Flux ꢁs. Currꢀnt ........................ 5
Rꢀlatiꢁꢀ Chromaticity ꢁs. Currꢀnt (Cool
White)...................................................... 6
Rꢀlatiꢁꢀ Chromaticity ꢁs. Tꢀmpꢀraturꢀ
(Cool White)............................................ 6
Rꢀlatiꢁꢀ Chromaticity ꢁs. Currꢀnt
Available in cool white, 80-CRI
minimum neutral white and 80-CRI,
85-CRI and 90-CRI warm white
ANSI-compatible chromaticity bins
Unlimited floor life at
•
•
≤ 30 ºC/85% RH
•
Reflow solderable - JEDEC
J-STD-020C
XLamp XM-L LeDs can ꢀnablꢀ LeD light
into nꢀw applications that rꢀquirꢀ tꢀns
of thousands of lumꢀns, such as high
bay and high-output arꢀa lighting. Thꢀ
XM-L is also thꢀ idꢀal choicꢀ for lighting
applications whꢀrꢀ high light output and
maximum efficacy are required, such as
LeD light bulbs, outdoor lighting, portablꢀ
lighting, indoor lighting and solar-
powꢀrꢀd lighting.
(Warm White) ......................................... 7
Rꢀlatiꢁꢀ Chromaticity ꢁs. Tꢀmpꢀraturꢀ
(Warm White) ......................................... 7
Typical Spatial Distribution.................... 8
Thꢀrmal Dꢀsign...................................... 8
Reflow Soldering Characteristics.......... 9
Notes .................................................... 10
Mꢀchanical Dimꢀnsions ...................... 12
Tapꢀ and Rꢀꢀl....................................... 13
Packaging............................................. 14
•
•
•
elꢀctrically nꢀutral thꢀrmal path
RoHS and REACh compliant
UL® rꢀcognizꢀd componꢀnt
(E349212)
Copyright © 2010-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are
registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
XLamp® Xm-L LED
ChAꢀACtEꢀiꢁtiCꢁ
Cꢂaracꢃerꢄsꢃꢄcs
uꢅꢄꢃ
Mꢄꢅꢄmꢆm
typꢄcal
Maxꢄmꢆm
Thꢀrmal rꢀsistancꢀ, junction to soldꢀr point
Viewing angle (FWHM)
°C/W
2.5
125
-2.1
dꢀgrꢀꢀs
Temperature coefficient of voltage
ESD withstand voltage (HBM per Mil-Std-883D)
DC forward currꢀnt
mV/°C
v
mA
v
8000
3000
5
Rꢀꢁꢀrsꢀ ꢁoltagꢀ
Forward voltage (@ 700 mA)
Forward voltage (@ 1500 mA)
Forward voltage (@ 3000 mA)
LeD junction tꢀmpꢀraturꢀ
v
2.9
3.1
3.5
v
v
3.35
°C
150
Copyright © 2010-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
2
XLamp® Xm-L LED
FLuX ChAꢀACtEꢀiꢁtiCꢁ (tJ = 25 °C)
The following table provides several base order codes for XLamp XM-L LEDs. It is important to note that the base order codes listed here
arꢀ a subsꢀt of thꢀ total aꢁailablꢀ ordꢀr codꢀs for thꢀ product family. For morꢀ ordꢀr codꢀs, as wꢀll as a complꢀtꢀ dꢀscription of thꢀ ordꢀr-
code nomenclature, please consult the XLamp XM-L LED Binning and Labeling document.
Mꢄꢅꢄmꢆm Lꢆmꢄꢅꢇꢆs Flꢆx @
Calcꢆlaꢃed Mꢄꢅꢄmꢆm
Luminous Flux (lm)*
CCt ꢀaꢅge
700 mA
Cꢇlꢇr
order Cꢇde
Mꢄꢅ.
Max.
Grꢇꢆp
T5
T6
U2
T4
T5
T2
T3
T2
T3
S4
S5
S6
S4
S5
S6
Flux (lm)
260
280
300
240
260
200
220
200
220
164
172
182
164
172
182
1000 mA
1500 mA
511
551
590
472
511
393
433
393
433
323
338
358
323
338
358
2000 mA
360
388
416
332
360
277
305
277
305
227
238
252
227
238
252
643
692
742
593
643
494
544
494
544
406
425
450
406
425
450
XMLAWT-00-0000-0000T5051
XMLAWT-00-0000-0000T6051
XMLAWT-00-0000-0000U2051
XMLAWT-00-0000-000LT40E4
XMLAWT-00-0000-000LT50E4
XMLAWT-00-0000-000HT20E7
XMLAWT-00-0000-000HT30F7
XMLAWT-00-0000-000LT20E7
XMLAWT-00-0000-000LT30F7
XMLAWT-00-0000-000PS40E7
XMLAWT-00-0000-000PS50E7
XMLAWT-00-0000-000PS60E7
XMLAWT-00-0000-000US40E7
XMLAWT-00-0000-000US50E7
XMLAWT-00-0000-000US60E7
Cool White
5000 K
8300 K
Neutral White
80-CRI White
Warm White
3700 K
2600 K
2600 K
5000 K
4300 K
3700 K
85-CRI White
90-CRI White
2600 K
2600 K
3200 K
3200 K
Notes:
•
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on
CRI measurements. See the Measurements section (page 10).
Typical CRI for Cool White (5000 K – 8300 K CCT) is 65.
Typical CRI for Neutral White (3700 K – 5000 K CCT) is 75.
Typical CRI for Warm White (2600 K – 3700 K CCT) is 80.
Minimum CRI for 80-CRI White is 80.
Minimum CRI for 85-CRI White is 85.
Minimum CRI for 90-CRI White is 90
Calculated flux values are for reference only.
•
•
•
•
•
•
*
Copyright © 2010-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
3
XLamp® Xm-L LED
ꢀELAtivE ꢁPECtꢀAL PowEꢀ Diꢁtꢀibution
100
80
60
40
20
0
5000 K - 8300 K CCT
3700 K - 5000 K CCT
2600 K - 3700 K CCT
380
430
480
530
580
630
680
730
780
Wavelength (nm)
ꢀELAtivE FLuX vꢁ. JunCtion tEMPEꢀAtuꢀE (iF = 700 mA)
100%
90%
80%
70%
60%
50%
40%
30%
20%
10%
0%
25
50
75
100
125
150
Junction Temperature (ºC)
Copyright © 2010-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
4
XLamp® Xm-L LED
ELECtꢀiCAL ChAꢀACtEꢀiꢁtiCꢁ (tJ = 25 °C)
3000
2800
2600
2400
2200
2000
1800
1600
1400
1200
1000
800
600
400
200
0
2.0
2.2
2.4
2.6
2.8
3.0
3.2
3.4
3.6
Forward Voltage (V)
ꢀELAtivE FLuX vꢁ. CuꢀꢀEnt (tJ = 25 °C)
350%
325%
300%
275%
250%
225%
200%
175%
150%
125%
100%
75%
50%
25%
0%
0
200 400 600 800 1000 1200 1400 1600 1800 2000 2200 2400 2600 2800 3000
Forward Current (mA)
Copyright © 2010-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
5
XLamp® Xm-L LED
ReLAtꢀve ChRꢁꢂAtꢀCꢀty vꢃ. CꢄRReꢅt (CꢁꢁL Whꢀte)
0.020
0.015
0.010
0.005
0.000
-0.005
-0.010
-0.015
-0.020
ΔCCx
ΔCCy
0
500
1000
1500
2000
2500
3000
Current (mA)
ReLAtꢀve ChRꢁꢂAtꢀCꢀty vꢃ. teꢂpeRAtꢄRe (CꢁꢁL Whꢀte)
0.020
0.015
0.010
0.005
0.000
-0.005
-0.010
-0.015
-0.020
ΔCCx
ΔCCy
25
50
75
100
125
150
Tsp (°C)
Copyright © 2010-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
6
XLamp® Xm-L LED
ReLAtꢀve ChRꢁꢂAtꢀCꢀty vꢃ. CꢄRReꢅt (WARꢂ Whꢀte)
0.020
0.015
0.010
0.005
0.000
-0.005
-0.010
-0.015
-0.020
ΔCCx
ΔCCy
0
500
1000
1500
2000
2500
3000
Current (mA)
ReLAtꢀve ChRꢁꢂAtꢀCꢀty vꢃ. teꢂpeRAtꢄRe (WARꢂ Whꢀte)
0.020
0.015
0.010
0.005
0.000
-0.005
-0.010
-0.015
-0.020
ΔCCx
ΔCCy
25
50
75
100
125
150
Tsp (°C)
Copyright © 2010-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
7
XLamp® Xm-L LED
tꢈPiCAL ꢁPAtiAL Diꢁtꢀibution
100%
80%
60%
40%
20%
0%
-100
-80
-60
-40
-20
0
20
40
60
80
100
Angle (º)
thEꢀMAL DEꢁiGn
The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is crucial for the end
product to bꢀ dꢀsignꢀd in a mannꢀr that minimizꢀs thꢀ thꢀrmal rꢀsistancꢀ from thꢀ soldꢀr point to ambiꢀnt in ordꢀr to optimizꢀ lamp lifꢀ
and optical charactꢀristics.
3500
3000
2500
2000
1500
Rj-a = 4 °C/W
Rj-a = 7 °C/W
Rj-a = 10 °C/W
Rj-a = 15 °C/W
1000
500
0
0
20
40
60
80
100
120
140
160
Ambient Temperature (ºC)
Copyright © 2010-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
8
XLamp® Xm-L LED
ꢀEFLow ꢁoLDEꢀinG ChAꢀACtEꢀiꢁtiCꢁ
In testing, Cree has found XLamp XM-L LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a general
guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of the solder paste used.
Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment.
tP
Critical Zone
TL to TP
TP
Ramp-up
TL
tS
Tsmax
Tsmin
Ramp-down
ts
Preheat
25
t 25˚C to Peak
Time
Prꢇfꢄle Feaꢃꢆre
Lead-Free ꢁꢇlder
Average Ramp-Up Rate (Tsmax to Tp)
1.2 °C/second
120 °C
Prꢀhꢀat: Tꢀmpꢀraturꢀ Min (Tsmin
Prꢀhꢀat: Tꢀmpꢀraturꢀ Max (Tsmax
Prꢀhꢀat: Timꢀ (tsmin to tsmax
)
)
170 °C
65-150 sꢀconds
217 °C
)
Time Maintained Above: Temperature (TL)
Time Maintained Above: Time (tL)
45-90 seconds
Peak/Classification Temperature (Tp)
235 - 245 °C
Time Within 5 °C of Actual Peak Temperature (tp)
Ramp-Down Ratꢀ
20-40 sꢀconds
1 - 6 °C/second
4 minutꢀs max.
Time 25 °C to Peak Temperature
Note: All temperatures refer to the topside of the package, measured on the package body surface.
Copyright © 2010-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
9
XLamp® Xm-L LED
notEꢁ
Measꢆremeꢅꢃs
The luminous flux, radiant power, chromaticity, forward voltage and CRI measurements in this document are binning specifications only
and solꢀly rꢀprꢀsꢀnt product mꢀasurꢀmꢀnts as of thꢀ datꢀ of shipmꢀnt. Thꢀsꢀ mꢀasurꢀmꢀnts will changꢀ oꢁꢀr timꢀ basꢀd on a numbꢀr
of factors that are not within Cree’s control and are not intended or provided as operational specifications for the products. Calculated
values are provided for informational purposes only and are not intended as specifications.
prꢆ‑Rꢆlꢆasꢆ Qualificaꢇion tꢆsꢇing
Plꢀasꢀ rꢀad thꢀ LeD Rꢀliability Oꢁꢀrꢁiꢀw for details of the qualification process Cree applies to ensure long-term reliability for XLamp
LEDs and details of Cree’s pre-release qualification testing for XLamp LEDs.
Lꢆmeꢅ Maꢄꢅꢃeꢅaꢅce
Cree now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen maintenance.
For information on the specific LM-80 data sets available for this LED, refer to the public LM-80 results document.
Plꢀasꢀ rꢀad thꢀ Long-Tꢀrm Lumꢀn Maintꢀnancꢀ application notꢀ for morꢀ dꢀtails on Crꢀꢀ’s lumꢀn maintꢀnancꢀ tꢀsting and forꢀcasting.
Plꢀasꢀ rꢀad thꢀ Thꢀrmal Managꢀmꢀnt application notꢀ for dꢀtails on how thꢀrmal dꢀsign, ambiꢀnt tꢀmpꢀraturꢀ, and driꢁꢀ currꢀnt affꢀct
thꢀ LeD junction tꢀmpꢀraturꢀ.
Mꢇꢄsꢃꢆre ꢁeꢅsꢄꢃꢄꢉꢄꢃy
Cree recommends keeping XLamp LEDs in the provided, resealable moisture-barrier packaging (MBP) until immediately prior to soldering.
Unopened MBPs that contain XLamp LEDs do not need special storage for moisture sensitivity.
Once the MBP is opened, XLamp XM-L LEDs may be stored as MSL 1 per JEDEC J-STD-033, meaning they have unlimited floor life in
conditions of ≤ 30 ºC/85% relative humidity (RH). Regardless of the storage condition, Cree recommends sealing any unsoldered LEDs
in the original MBP.
ꢀꢇhꢁ Cꢇmplꢄaꢅce
The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold
limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as
implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product
Documꢀntation sꢀctions of www.crꢀꢀ.com.
ꢀEACꢂ Cꢇmplꢄaꢅce
REACh substances of very high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA)
has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree representative to
insure you get the most up-to-date REACh SVHC Declaration. REACh banned substance information (REACh Article 67) is also available
upon rꢀquꢀst.
Copyright © 2010-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
10
XLamp® Xm-L LED
notEꢁ - ContinuED
uL® ꢀecꢇgꢅꢄzed Cꢇmpꢇꢅeꢅꢃ
Level 4 enclosure consideration. The LED package or a portion thereof has been investigated as a fire and electrical enclosure per ANSI/
UL 8750.
vꢄsꢄꢇꢅ Adꢉꢄsꢇry
WARNING: Do not look at exposed lamp in operation. Eye injury can result. For morꢀ information about LeDs and ꢀyꢀ safꢀty, plꢀasꢀ rꢀfꢀr
to thꢀ LeD eyꢀ Safꢀty application notꢀ.
Copyright © 2010-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
11
XLamp® Xm-L LED
MEChAniCAL DiMEnꢁionꢁ
Thꢀrmal ꢁias, if prꢀsꢀnt, arꢀ not shown on thꢀsꢀ drawings.
All measurements are ±.13 mm unless otherwise indicated.
4.78
3.78
3.02
2.78
.50
5.00
0.73
.50
5.00
4.78
R2.26
tꢇp vꢄeꢊ
bꢇꢃꢃꢇm vꢄeꢊ
ꢁꢄde vꢄeꢊ
4.78
.80
.50
.25
.50
.50
.80
4.78
4.78
.25
.97
2.78
4.78
ꢀecꢇmmeꢅded PCb ꢁꢇlder Pad
ꢀecꢇmmeꢅded ꢁꢃeꢅcꢄl Paꢃꢃerꢅ
(ꢃꢈadꢆd Arꢆa ꢀs ꢁꢉꢆn)
Copyright © 2010-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
12
XLamp® Xm-L LED
tAPE AnD ꢀEEL
All Cree carrier tapes conform to EIA-481D, Automated Component Handling Systems Standard.
All dimensions in mm.
+.10
-.00
+.0039
.0591
-.0000 [ ]
2.00[.079]
4.00[.157]
Do1.50
P2
1.75[.069]
E1
Po
3.0°
5.40[.213]
Bo
7.0°
12.00[.472]
NOMINAL
5.50[.217]F
12.30 [.484]
3.35[.13
Ko
10.25
[.404]
E2
MAX
W
5.40[.213]
Ao
1.50[.059]
D1
.36[.014]
T
8.00[.315]
P
User Feed Direction
4
3.35
8
1.75
12
END
CATHODE SIDE
START
ANODE SIDE
Leader
400mm (min.) of
empty pockets with
at least 100mm
sealed by tape
Trailer
160mm (min) of
empty pockets
sealed with tape
(15 pockets min.)
Loaded Pockets
(1000 Lamps)
(40 empty pockets min.)
12.4
+.2
.0
MEASURED AT HUB
330
+.25
-.75
16.4
+0.2
.0
1.9±.4
MEASURED AT HUB
21±.4
13.1 ±.2
12.4
+1.0
-.5
MEASURED AT EDGE
60°
60°
Copyright © 2010-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
13
XLamp® Xm-L LED
PACkAGinG
Unpackaged Reel
Label with Cree Bin Code,
Quantity, Reel ID
Packaged Reel
Label with Cree Order Code,
Quantity, Reel ID, PO #
Label with Cree Bin Code,
Quantity, Reel ID
Boxed Reel
Label with Cree Order Code,
Quantity, Reel ID, PO #
Patent Label
Label with Cree Bin Code,
Quantity, Reel ID
Copyright © 2010-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
14
相关型号:
©2020 ICPDF网 联系我们和版权申明