XQ-D [CREE]
XLamp XQ-D LED;
| 型号： | XQ-D |
| 厂家： | 
CREE, INC |
| 描述： | XLamp XQ-D LED |
| 文件： | 总12页 (文件大小：1318K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Product family data sheet
Cree® XLamp® XQ-D LED
PRODUCT DESCRIPTION
FEATURES
TAbLE OF CONTENTS
Crꢀꢀ XLamp® XQ-D LeDs rꢀꢁolutionizꢀ
low-cost, high-powꢀr LeDs by dꢀliꢁꢀring
•ꢀ Crꢀꢀ’s smallꢀst lighting class LeD:
1.6ꢀXꢀ1.6ꢀXꢀ1.6 mm
Charactꢀristics....................................... 2
FluxꢀCharacteristics ............................... 3
Rꢀlatiꢁꢀ Spꢀctral Powꢀr Distribution .... 4
RelativeꢀFluxꢀvs.ꢀJunctionꢀ
lighting-class rꢀliability and
a
widꢀr
•ꢀ Aꢁailablꢀ in whitꢀ, 80-minimum CRI
whitꢀ, and 70-minimum CRI cool
whitꢀ
sprꢀad of light than typical plastic
packagꢀs. Thꢀ XQ-D’s innoꢁatiꢁꢀ
widꢀ light ꢀmission can improꢁꢀ thꢀ
omnidirꢀctionality of rꢀplacꢀmꢀnt lamps,
whilꢀ also rꢀducing systꢀm cost by using
fꢀwꢀr LeDs.
Tꢀmpꢀraturꢀ........................................... 4
elꢀctrical Charactꢀristics....................... 5
RelativeꢀFluxꢀvs.ꢀCurrent ........................ 5
Typical Spatial Distribution.................... 6
Thꢀrmal Dꢀsign...................................... 6
ReflowꢀSolderingꢀCharacteristics.......... 7
Notꢀs ...................................................... 8
Mꢀchanical Dimꢀnsions ...................... 10
Tapꢀ and Rꢀꢀl....................................... 11
Packaging............................................. 12
•ꢀ Binnedꢀatꢀ25 °C
•ꢀ 700 mAꢀmaximumꢀdriveꢀcurrent
•ꢀ Lowꢀthermalꢀresistance:ꢀ7.5 °C/W
•ꢀ Wideꢀviewingꢀangle:ꢀ145°
•ꢀ Reflowꢀsolderableꢀ-ꢀJEDECꢀ
J-STD-020Cꢀcompatible
Using Crꢀꢀ’s nꢀwꢀst gꢀnꢀration of
silicon carbidꢀ-basꢀd LeD chips, XQ-D is
optimizꢀd to dramatically lowꢀr systꢀm
cost in rꢀplacꢀmꢀnt lamp, non-dirꢀctional
and outdoor arꢀa lighting applications.
•ꢀ Unlimitedꢀfloorꢀlifeꢀatꢀ≤ꢀ30 °C/85%ꢀRH
•ꢀ RoHSꢀandꢀREAChꢀcompliant
•ꢀ UL® rꢀcognizꢀd componꢀnt
(E349212)
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are
registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
XLamp® XQ-D LED
ChARACTERISTICS
Cꢀaracteristics
Unit
Minimum
Typical
Maximum
Thꢀrmal rꢀsistancꢀ, junction to soldꢀr point
Viewingꢀangleꢀ(FWHM)
°C/W
dꢀgrꢀꢀs
mV/°C
7.5
145
Temperatureꢀcoefficientꢀofꢀvoltage
ESDꢀclassificationꢀ(HBMꢀperꢀMil-Std-883D)
DC forward currꢀnt
-3
Class 1
350
mA
v
700
-5
Rꢀꢁꢀrsꢀ ꢁoltagꢀ
Forwardꢀvoltageꢀ(@ 350 mA,ꢀ25 °C)
LeD junction tꢀmpꢀraturꢀ
v
3.1
3.5
150
°C
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
2
XLamp® XQ-D LED
FLUX ChARACTERISTICS (TJ = 25 °C)
Thꢀ following tablꢀ proꢁidꢀs sꢀꢁꢀral basꢀ ordꢀr codꢀs for XLamp XQ-D LeDs. It is important to notꢀ that thꢀ basꢀ ordꢀr codꢀs listꢀd hꢀrꢀ
arꢀ a subsꢀt of thꢀ total aꢁailablꢀ ordꢀr codꢀs for thꢀ product family. For morꢀ ordꢀr codꢀs, as wꢀll as a complꢀtꢀ dꢀscription of thꢀ ordꢀr-
codꢀ nomꢀnclaturꢀ, plꢀasꢀ consult thꢀ XLamp XQ LeD Family Binning and Labꢀling documꢀnt.
Calculated
Minimum Luminous Flux
Minimum
Luminous Flux
(lm)*
CCT Range
@ 350 mA
Color
Order Code
Min.
Max.
Group
R4
Flux (lm)
130
700 mA
227
213
199
227
213
199
213
199
187
172
164
153
172
164
153
XQDAWT-00-0000-00000LG51
XQDAWT-00-0000-00000LF51
XQDAWT-00-0000-00000LE51
XQDAWT-00-0000-00000BG51
XQDAWT-00-0000-00000BF51
XQDAWT-00-0000-00000BE51
XQDAWT-00-0000-00000BFE5
XQDAWT-00-0000-00000BEE5
XQDAWT-00-0000-00000LDE5
XQDAWT-00-0000-00000HCE7
XQDAWT-00-0000-00000HBE7
XQDAWT-00-0000-00000HAE7
XQDAWT-00-0000-00000LCE7
XQDAWT-00-0000-00000LBE7
XQDAWT-00-0000-00000LAE7
CoolꢀWhite
5000 K
5000 K
3700 K
2600 K
2600 K
8300 K
R3
122
R2
114
R4
130
70 CRI Minimum
CoolꢀWhite
8300 K
5000 K
4300ꢀK
3700 K
R3
122
R2
114
R3
122
NeutralꢀWhite
R2
114
Q5
Q4
Q3
Q2
Q4
Q3
Q2
107
100
80 CRI Minimum
93.9
87.4
100
White
WarmꢀWhite
93.9
87.4
Notꢀs:
•ꢀ Creeꢀmaintainsꢀaꢀtoleranceꢀofꢀ±7%ꢀonꢀfluxꢀandꢀpowerꢀmeasurements,ꢀ±0.005ꢀonꢀchromaticityꢀ(CCx,ꢀCCy)ꢀmeasurementsꢀandꢀ±2ꢀonꢀCRIꢀ
measurements.ꢀSeeꢀtheꢀMeasurementsꢀsectionꢀ(pageꢀ8).
•ꢀ TypicalꢀCRIꢀforꢀNeutralꢀWhite,ꢀ3700ꢀKꢀ-ꢀ5000KꢀCCTꢀisꢀ75.
•ꢀ TypicalꢀCRIꢀforꢀWarmꢀWhite,ꢀ2600ꢀKꢀ-ꢀ3700ꢀKꢀCCTꢀisꢀ80.
•ꢀ MinimumꢀCRIꢀforꢀ70ꢀCRIꢀMinimumꢀCoolꢀWhiteꢀisꢀ70.
•ꢀ MinimumꢀCRIꢀforꢀ80ꢀCRIꢀMinimumꢀWhiteꢀisꢀ80.
*
Calculatedꢀfluxꢀvaluesꢀatꢀ700 mAꢀareꢀforꢀreferenceꢀonly.
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
3
XLamp® XQ-D LED
RELATIvE SPECTRAL POwER DISTRIbUTION
100%
80%
60%
40%
20%
0%
Cool White
Neutral White
Warm White
380
430
480
530
580
630
680
730
780
Wavelength (nm)
RELATIvE FLUX vS. JUNCTION TEMPERATURE (IF = 350 mA)
120%
100%
80%
60%
40%
20%
0%
25
50
75
100
125
150
Junction Temperature (ºC)
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
4
XLamp® XQ-D LED
ELECTRICAL ChARACTERISTICS (TJ = 25 °C)
700
600
500
400
300
200
100
0
2.5
2.6
2.7
2.8
2.9
3.0
3.1
3.2
3.3
Forward Voltage (V)
RELATIvE FLUX vS. CURRENT (TJ = 25 °C)
180%
160%
140%
120%
100%
80%
60%
40%
20%
0%
0
100
200
300
400
500
600
700
Forward Current (mA)
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
5
XLamp® XQ-D LED
TꢁPICAL SPATIAL DISTRIbUTION
100%
90%
80%
70%
60%
50%
40%
30%
20%
10%
0%
-90
-70
-50
-30
-10
10
30
50
70
90
Angle (º)
ThERMAL DESIGN
TheꢀmaximumꢀforwardꢀcurrentꢀisꢀdeterminedꢀbyꢀtheꢀthermalꢀresistanceꢀbetweenꢀtheꢀLEDꢀjunctionꢀandꢀambient.ꢀItꢀisꢀcrucialꢀforꢀtheꢀendꢀ
product to bꢀ dꢀsignꢀd in a mannꢀr that minimizꢀs thꢀ thꢀrmal rꢀsistancꢀ from thꢀ soldꢀr point to ambiꢀnt in ordꢀr to optimizꢀ lamp lifꢀ
and optical charactꢀristics.
800
700
600
500
400
300
Rj-a = 10°C/W
Rj-a = 15°C/W
Rj-a = 20°C/W
Rj-a = 25°C/W
200
100
0
0
20
40
60
80
100
120
140
160
Ambient Temperature (ºC)
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
6
XLamp® XQ-D LED
REFLOw SOLDERING ChARACTERISTICS
Inꢀtesting,ꢀCreeꢀhasꢀfoundꢀXLampꢀXQ-DꢀLEDsꢀtoꢀbeꢀcompatibleꢀwithꢀJEDECꢀJ-STD-020C,ꢀusingꢀtheꢀparametersꢀlistedꢀbelow.ꢀAsꢀaꢀgeneralꢀ
guideline,ꢀCreeꢀrecommendsꢀthatꢀusersꢀfollowꢀtheꢀrecommendedꢀsolderingꢀprofileꢀprovidedꢀbyꢀtheꢀmanufacturerꢀofꢀtheꢀsolderꢀpasteꢀused.
NoteꢀthatꢀthisꢀgeneralꢀguidelineꢀmayꢀnotꢀapplyꢀtoꢀallꢀPCBꢀdesignsꢀandꢀconfigurationsꢀofꢀreflowꢀsolderingꢀequipment.
tP
Critical Zone
TL to TP
TP
Ramp-up
TL
tS
Tsmax
Tsmin
Ramp-down
ts
Preheat
25
t 25˚C to Peak
IPC/JEDECꢀJ-STD-020C
Time
Profile Feature
Lead-Free Solder
Aꢁꢀragꢀ Ramp-Up Ratꢀ (TsmaxꢀtoꢀTp)
Prꢀhꢀat: Tꢀmpꢀraturꢀ Min (Tsmin)ꢀ
1.2 °C/second
120ꢀ°C
Preheat:ꢀTemperatureꢀMaxꢀ(Tsmax
Prꢀhꢀat: Timꢀ (tsmin to tsmax
)
170ꢀ°C
65-150 sꢀconds
217ꢀ°C
)
Timꢀ Maintainꢀd Aboꢁꢀ: Tꢀmpꢀraturꢀ (TL)
Timꢀ Maintainꢀd Aboꢁꢀ: Timꢀ (tL)
45-90ꢀseconds
Peak/ClassificationꢀTemperatureꢀ(Tp)
235ꢀ-ꢀ245ꢀ°C
TimeꢀWithinꢀ5 °CꢀofꢀActualꢀPeakꢀTemperatureꢀ(tp)
Ramp-Down Ratꢀ
20-40ꢀseconds
1ꢀ-ꢀ6ꢀ°C/second
4ꢀminutesꢀmax.
Timeꢀ25 °CꢀtoꢀPeakꢀTemperature
Notꢀ: All tꢀmpꢀraturꢀs rꢀfꢀr to topsidꢀ of thꢀ packagꢀ, mꢀasurꢀd on thꢀ packagꢀ body surfacꢀ.
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
7
XLamp® XQ-D LED
NOTES
Measurements
Theꢀ luminousꢀ flux,ꢀ radiantꢀ power,ꢀ chromaticityꢀ andꢀ CRIꢀ measurementsꢀ inꢀ thisꢀ documentꢀ areꢀ binningꢀ specificationsꢀ onlyꢀ andꢀ solelyꢀ
rꢀprꢀsꢀnt product mꢀasurꢀmꢀnts as of thꢀ datꢀ of shipmꢀnt. Thꢀsꢀ mꢀasurꢀmꢀnts will changꢀ oꢁꢀr timꢀ basꢀd on a numbꢀr of factors
thatꢀareꢀnotꢀwithinꢀCree’sꢀcontrolꢀandꢀareꢀnotꢀintendedꢀorꢀprovidedꢀasꢀoperationalꢀspecificationsꢀforꢀtheꢀproducts.ꢀCalculatedꢀvaluesꢀareꢀ
providedꢀforꢀinformationalꢀpurposesꢀonlyꢀandꢀareꢀnotꢀintendedꢀasꢀspecifications.
Pre‑Release Qualification Testing
Plꢀasꢀ rꢀad thꢀ LeD Rꢀliability OꢁꢀrꢁiꢀwꢀforꢀdetailsꢀofꢀtheꢀqualificationꢀprocessꢀCreeꢀappliesꢀtoꢀensureꢀlong-termꢀreliabilityꢀforꢀXLampꢀ
LEDsꢀandꢀdetailsꢀofꢀCree’sꢀpre-releaseꢀqualificationꢀtestingꢀforꢀXLampꢀLEDs.
Lumen Maintenance
CreeꢀnowꢀusesꢀstandardizedꢀIESꢀLM-80-08ꢀandꢀTM-21-11ꢀmethodsꢀforꢀcollectingꢀlong-termꢀdataꢀandꢀextrapolatingꢀLEDꢀlumenꢀmaintenance.ꢀ
ForꢀinformationꢀonꢀtheꢀspecificꢀLM-80ꢀdataꢀsetsꢀavailableꢀforꢀthisꢀLED,ꢀreferꢀtoꢀtheꢀpublicꢀLM-80 rꢀsults documꢀnt.
Plꢀasꢀ rꢀad thꢀ Long-Tꢀrm Lumꢀn Maintꢀnancꢀ application notꢀ for morꢀ dꢀtails on Crꢀꢀ’s lumꢀn maintꢀnancꢀ tꢀsting and forꢀcasting.
Plꢀasꢀ rꢀad thꢀ Thꢀrmal Managꢀmꢀnt application notꢀ for dꢀtails on how thꢀrmal dꢀsign, ambiꢀnt tꢀmpꢀraturꢀ, and driꢁꢀ currꢀnt affꢀct
thꢀ LeD junction tꢀmpꢀraturꢀ.
Moisture Sensitiꢂity
CreeꢀrecommendsꢀkeepingꢀXLampꢀLEDsꢀinꢀtheꢀprovided,ꢀresealableꢀmoisture-barrierꢀpackagingꢀ(MBP)ꢀuntilꢀimmediatelyꢀpriorꢀtoꢀsoldering.ꢀ
Unopꢀnꢀd MBPs that contain XLamp LeDs do not nꢀꢀd spꢀcial storagꢀ for moisturꢀ sꢀnsitiꢁity.
OnceꢀtheꢀMBPꢀisꢀopened,ꢀXLampꢀXQ-DꢀLEDsꢀmayꢀbeꢀstoredꢀasꢀMSLꢀ1ꢀperꢀJEDECꢀJ-STD-033,ꢀmeaningꢀtheyꢀhaveꢀunlimitedꢀfloorꢀlifeꢀinꢀ
conditionsꢀofꢀ≤ꢀ30ꢀºC/85%ꢀrelativeꢀhumidityꢀ(RH).ꢀRegardlessꢀofꢀstorageꢀcondition,ꢀCreeꢀrecommendsꢀsealingꢀanyꢀunsolderedꢀLEDsꢀinꢀtheꢀ
original MBP.
RohS Compliance
TheꢀlevelsꢀofꢀRoHSꢀrestrictedꢀmaterialsꢀinꢀthisꢀproductꢀareꢀbelowꢀtheꢀmaximumꢀconcentrationꢀvaluesꢀ(alsoꢀreferredꢀtoꢀasꢀtheꢀthresholdꢀ
limits)ꢀpermittedꢀforꢀsuchꢀsubstances,ꢀorꢀareꢀusedꢀinꢀanꢀexemptedꢀapplication,ꢀinꢀaccordanceꢀwithꢀEUꢀDirectiveꢀ2011/65/ECꢀ(RoHS2),ꢀasꢀ
implementedꢀJanuaryꢀ2,ꢀ2013.ꢀRoHSꢀDeclarationsꢀforꢀthisꢀproductꢀcanꢀbeꢀobtainedꢀfromꢀyourꢀCreeꢀrepresentativeꢀorꢀfromꢀtheꢀProductꢀ
Documꢀntation sꢀctions of www.crꢀꢀ.com.
REACꢀ Compliance
REAChꢀsubstancesꢀofꢀveryꢀhighꢀconcernꢀ(SVHCs)ꢀinformationꢀisꢀavailableꢀforꢀthisꢀproduct.ꢀSinceꢀtheꢀEuropeanꢀChemicalꢀAgencyꢀ(ECHA)ꢀ
hasꢀpublishedꢀnoticeꢀofꢀtheirꢀintentꢀtoꢀfrequentlyꢀreviseꢀtheꢀSVHCꢀlistingꢀforꢀtheꢀforeseeableꢀfuture,ꢀpleaseꢀcontactꢀaꢀCreeꢀrepresentativeꢀtoꢀ
insureꢀyouꢀgetꢀtheꢀmostꢀup-to-dateꢀREAChꢀSVHCꢀDeclaration.ꢀREAChꢀbannedꢀsubstanceꢀinformationꢀ(REAChꢀArticleꢀ67)ꢀisꢀalsoꢀavailableꢀ
uponꢀrequest.
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
8
XLamp® XQ-D LED
NOTES - CONTINUED
UL® Recognized Component
Levelꢀ1ꢀenclosureꢀconsideration.ꢀTheꢀLEDꢀpackageꢀorꢀaꢀportionꢀthereofꢀhasꢀnotꢀbeenꢀinvestigatedꢀasꢀaꢀfireꢀenclosureꢀorꢀaꢀfireꢀandꢀelectricalꢀ
enclosureꢀperꢀANSI/ULꢀ8750.
vision Adꢂisory
WARNING:ꢀDoꢀnotꢀlookꢀatꢀanꢀexposedꢀlampꢀinꢀoperation.ꢀEyeꢀinjuryꢀcanꢀresult.ꢀForꢀmoreꢀinformationꢀaboutꢀLEDsꢀandꢀeyeꢀsafety,ꢀpleaseꢀ
rꢀfꢀr to thꢀ LeD eyꢀ Safꢀty application notꢀ.
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
9
XLamp® XQ-D LED
MEChANICAL DIMENSIONS
All dimꢀnsions in mm.
Mꢀasurꢀmꢀnt tolꢀrancꢀs unlꢀss indicatꢀd othꢀrwisꢀ: ±.13 mm
1.60
.600
.600
NOTCH IS ON
CATHODE (-) SIDE
1.41
1.500
1.60
1.60± .05
.300
Top vieꢃ
Side vieꢃ
bottom vieꢃ
1.500
.300
.65
SOLDER PAD
REFERENCE
.30
3.300
1.60
1.60
Recommended PCb solder pad
3.300
Recommended trace layout
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
10
XLamp® XQ-D LED
TAPE AND REEL
AllꢀCreeꢀcarrierꢀtapesꢀconformꢀtoꢀEIA-481D,ꢀAutomatedꢀComponentꢀHandlingꢀSystemsꢀStandard.
Exceptꢀasꢀnoted,ꢀallꢀdimensionsꢀinꢀmm.
Measurementꢀtolerancesꢀunlessꢀindicatedꢀotherwise:ꢀ.xxꢀ=ꢀ±.25ꢀmm,ꢀ.xxxꢀ=ꢀ±.125ꢀmm
1.500
+.10
4.000
-.00
CATHODE SIDE
1.750
A
1.65
8.000
NOMINAL
8.30
MAX
1.85
1.000
A
3.50 ±.10
.30 ± .10
2.000
ANODE SIDE
User Feed Direction
END
START
Loaded Pockets
(2,000 Lamps)
Trailer
Leader
160 mm (min) of
empty pockets
sealed with tape
(20 pockets min.)
400 mm (min) of
empty pockets with
at least 100 mm
sealed by tape
(50 empty pockets min.)
User Feed Direction
Cover Tape
Pocket Tape
13mm
7"
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
11
XLamp® XQ-D LED
PACkAGING
Thꢀ diagrams bꢀlow show thꢀ packaging and labꢀls Crꢀꢀ usꢀs to ship XLamp XQ-D LeDs. XLamp XQ-D LeDs arꢀ shippꢀd in tapꢀ loadꢀd
onꢀaꢀreel.ꢀEachꢀboxꢀcontainsꢀonlyꢀoneꢀreelꢀinꢀaꢀmoistureꢀbarrierꢀbag.
Unpackaged Reel
Label with Cree Bin Code,
Quantity, Reel ID
Packaged Reel
Label with Cree Order Code,
Quantity, Reel ID, PO #
Label with Cree Bin Code,
Quantity, Reel ID
Boxed Reel
Label with Cree Order Code,
Quantity, Reel ID, PO #
Label with Cree Bin Code,
Quantity, Reel ID
Patent Label
(on bottom of box)
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
12
相关型号：
©2020 ICPDF网 联系我们和版权申明