6412 [CRYDOM]
AC Output Buffered Modules; AC输出缓冲模块
| 型号： | 6412 |
| 厂家： | 
CRYDOM INC., |
| 描述： | AC Output Buffered Modules |
| 文件： | 总2页 (文件大小：53K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
AC Output Buffered Modules
Buffered output modules contain addi-
tional internal amplification to reduce
drive requirements to a level suitable for
• Compatible w ith 5 & 15
Volt Logic Systems
the MOS devices used in many micro-
processor systems. To further reduce
the need for additional interface com-
ponents, they are available with both
inverting and non-inverting inputs, for
5 volt or 15 volt logic.
• Buffered Inverting and
Non-Inverting Modules
• Zero Voltage AC Sw itching
INPUT SPECIFICATIONS
6411
6421
6412
6422
(All voltages referenced to pin 5)
Nominal Input Voltage [Vdc]
5
Non-Inverting
0.0 - 0.8
2.4 - 6.0
75 @ 0.8V
100 @ 0.0V
—
5
Inverting
2.4 - 6.0
0.0 - 0.8
—
5
Non-Inverting
0.0 - 0.8
2.4 - 6.0
75 @ 0.8V
100 @ 0.0V
—
5
Inverting
2.4 - 6.0
0.0 - 0.8
—
Output Module Type
Must Turn On Voltage Range @ pin 4 [Vdc]
Must Turn Off Voltage Range @ pin 4 [Vdc]
Max. Input On-Current (Sink) @ pin 4 [µA]
—
—
Max. Input On-Current (Source) @ pin 4 [µA]
75 @ 2.4V
250 @ 6.0V
10
75 @ 2.4V
250 @ 6.0V
10
—
—
Max. Output Off-State Input Current @ pin 4 [µA] ➁
Logic Supply Voltage Range [Vdc]
10
10
3.5 - 6.0
20
3.5 - 6.0
20
3.5 - 6.0
20
3.5 - 6.0
20
Max. Logic Supply Current @ 5Vdc (w/o LED) [mA] ➀
Max. Logic Supply Current @ 5Vdc (w/ LED) [mA] ➀
15
15
15
15
6441
6451
15
6442
6452
15
Nominal Input Voltage [Vdc]
15
Non-Inverting
0.0 - 2.0
8.0 - 18
175 @ 2.0V
250 @ 0.0V
—
15
Non-Inverting
0.0 - 2.0
8.0 - 18
175 @ 2.0V
250 @ 0.0V
—
Output Module Type
Inverting
8.0 - 18
0.0 - 2.0
—
Inverting
8.0 - 18
0.0 - 2.0
—
Must Turn On Voltage Range @ pin 4 [Vdc]
Must Turn Off Voltage Range @ pin 4 [Vdc]
Max. Input On-Current (Sink) @ pin 4 [µA]
—
—
Max. Input On-Current (Source) @ pin 4 [µA]
75 @ 8.0V
200 @ 18V
10
75 @ 8.0V
200 @ 18V
10
—
—
Max. Input Current for Output Off-State @ pin 4 [µA] ➁
Logic Supply Voltage Range [Vdc]
10
10
10 - 18
25
10 - 18
25
10 -18
25
10 -18
25
Max. Logic Supply Current @ 5Vdc (w/o LED) [mA] ➀
Max. Logic Supply Current @ 5Vdc (w/ LED) [mA] ➀
22
22
22
22
OUTPUT SPECIFICATIONS
Load Current Range @ 45˚ C [A]
Load Voltage Range [Vdc]
Max. Surge Current 1 Cycle (Non-Rep) [Apk]
Max. On-State Voltage [Vdc]
Max. Off-State Leakage [mA]
Max. Turn On Time
0.02 - 3.5
12 - 140
80
0.02 - 3.5
12 - 140
80
0.02 - 3.5
24 - 280
80
0.02 - 3.5
24 - 280
80
1.5
1.5
1.5
1.5
5.0
5.0
5.0
5.0
1/2 Cycle
1/2 Cycle
400
1/2 Cycle
1/2 Cycle
400
1/2 Cycle
1/2 Cycle
600
1/2 Cycle
1/2 Cycle
600
Max. Turn Off Time
Transient Overvoltage [Vpk]
©1998 CRYDOM CORP Specifications subject to change without notice.
GENERAL NOTES
➀ LED optional. Placed in series with pin 3 for
For recommended applications and more information contact:
status indication.
USA: (800) 8 CRYDOM • (800) 827-9366 • (619) 715-7200 • fax (619) 715-7280
Crydom Corp, 9525 Chesapeake Drive, San Diego, CA 92123 • e-mail: sales@crydom.com
WEB SITE: http://www.crydom.com FASTFAX Product Information: (888) 267-9191
UK: (44)1202 812300 • fax (44)1202 812340 Crydom International Ltd., 85, Condor Close,
Woolsbridge Industrial Estate, Three-Legged Cross. Wimborne, Dorset, England BH21 6SU
GERMANY: (49) (0)6874 182580 • fax (49)(0)6874 182585 Crydom GmbH,
➁ Max. allowable leakage current from driver
maintain output off-state.
FastFax Document No. 308
081398, PAGE 1 OF 2
Gewerbegebiet Im Schachen, D-66687 Nunkirchen, Germany • e-mail: vertrieb@crydom.com
AC Output Buffered Modules
GENERAL SPECIFICATIONS
Min. Dielectric Input/Output (1 Minute)
Min. Isolation Resistance Input/Output (@ 500V)
Capacitance input to output
4,000 VRMS
1010 Ohms
8 pF
Temperature Range — Operating
Temperature Range — Storage
-40˚ C to 80˚ C
-40˚ C to 125˚ C
CURRENT DERATING CURVE
W IRING & M ECHANICAL DIAGRAM S
STATUS
LED
AC
OUTPUT
1
①
3
4
DC LOGIC
SUPPLY
3.5
(+)
LOAD
3.0
2.5
2.0
1.5
1.0
0
INV or
NON-INV
LOGIC
Zero
Switch
DC LOGIC INPUT
~
2
5
COM (-)
BOTTOM VIEW
20
40
60
80
.30
(7.6)
AMBIENT TEMPERATURE (ºC)
.60
(15.2)
Max. Load Current vs. Temp.
CAPTIVE
#4-40. PHILLIPS
HEAD HOLD
DOWN SCREW
.100
(2.5)
1.00
(25.4)
1.70
(43.1)
BUFFERED OUTPUT MODULES
A buffered non-inverting module turns on when pin 4 is held in the
low state (logic 0), the same as standard modules driven in the sink
mode. A buffered inverting module conversely turns on when pin 4
is held high (logic 1). In the absence of an input signal and/or logic
supply (open Circuit), all models will be in the off-state.
1.25
(31.7)
Buffered modules may be used with standard 5 pin PB or MS
mounting boards. However, the 3.3K pull-up resistor will add to the
logic drive current of a non-inverting module and may be removed.
For an inverting module, the resistor must be removed to avoid a
false “on” command, unless a “normally closed” condition is desir-
able for use with a ground seeking (logic 0) signal source.
.25
5
4
3
2
1
(6.3)
.30
(7.6)
.70
(17.8)
.040 (1.0) DIA.
(5 PLACES)
1.20
(30.5)
1.40
(35.5)
1.60
(40.6)
All dimensions are in inches (millimeters)
©1998 CRYDOM CORP Specifications subject to change without notice.
For recommended applications and more information contact:
USA: (800) 8 CRYDOM • (800) 827-9366 • (619) 715-7200 • fax (619) 715-7280
Crydom Corp, 9525 Chesapeake Drive, San Diego, CA 92123 • e-mail: sales@crydom.com
WEB SITE: http://www.crydom.com FASTFAX Product Information: (888) 267-9191
UK: (44)1202 812300 • fax (44)1202 812340 Crydom International Ltd., 85, Condor Close,
Woolsbridge Industrial Estate, Three-Legged Cross. Wimborne, Dorset, England BH21 6SU
GERMANY: (49) (0)6874 182580 • fax (49)(0)6874 182585 Crydom GmbH,
FastFax Document No. 308
081398, PAGE 2 OF 2
Gewerbegebiet Im Schachen, D-66687 Nunkirchen, Germany • e-mail: vertrieb@crydom.com
相关型号：
©2020 ICPDF网 联系我们和版权申明