CRTB6025 [CRYDOM]
DIN Rail Mount;型号: | CRTB6025 |
厂家: | CRYDOM INC., |
描述: | DIN Rail Mount |
文件: | 总6页 (文件大小:686K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
DIN Rail Mount
Datasheet
CTR Series
• Ratings 25 A per phase @ 600 VAC
• DIN-RAIL or Panel Mount 90mm (width) package
• UL 508 Endurance Rating for Enhanced Reliability
• SCR output for heavy industrial loads
• Overvoltage Protection Built in (Internal TVS)
• LED input Status indicator
• AC or DC control
• Zero voltage or instantaneous turn-on output
• UL Recognized, CE, RoHS and EMC Compliant
PRODUCT SELECTION
Control Voltage
4-32 VDC Control
90-140 VAC Control
180-280 VAC Control
25 A
CTRD6025
CRTB6025
CTRC6025
AVAILABLE OPTIONS
Control Voltage
B: 90 to 140 VAC
C: 180 to 280 VAC
D: 4 to 32 VDC
Output Rating
25: 25 Amps/phase
Series
CTR
D
60
25 -10
CTR: Standard 3 phase
90 mm DIN rail mount
SSR package
Thermal Pad
Line Voltage Rating
60: 48 to 600 VAC
Blank: Zero Voltage
Turn-On
Turn-On
-10: Instantaneous
Required for valid part number
For options only and not required for valid part number
Not all part number combinations are available.
Contact Crydom Technical Support for information on
the availability of a specific part number.
*
OUTPUT SPECIFICATIONS (1)
Description
Operating Voltage (47-63Hz) [VRMS]
Transient Overvoltage [Vpk]
Maximum Load Current [Arms] (2)
Minimum Load Current [Arms]
CTRx6025
48-600
1100
25
0.1
Maximum Off-State Leakage Current @ Rated Voltage [mArms]
Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] (3)
Maximum On-State Voltage Drop @ Rated Current [Vpk]
Maximum Surge Current (50/60 Hz, 1 cycle) [Apk]
Maximum I² t for Fusing (50/60Hz, 1/2 cycle ) [A² sec]
UL/IEC 60947 Motor Control Rating @ 240V [HP/KW] (4)
UL/IEC 60947 Motor Control Rating @ 380V [HP/KW] (4)
UL/IEC 60947 Motor Control Rating @ 480V [HP/KW] (4)
Minimum Power Factor (with Maximum Load)
Min/Max stranded wire
0.25
500
1.35
286/300
410/374
1/0.74
2/1.48
3/2.22
0.5
16/8 AWG
16/10 AWG
Min/Max solid wire
Do not forget to visit us at: www.crydom.com
Copyright © 2016 Crydom Inc. Specifications subject to change without notice.
DIN Rail Mount
Datasheet
(1)
INPUT SPECIFICATIONS
Description
CTRD6025
4.0-32 VDC
4.0 VDC
1.0 VDC
22 mA
CTRB6025
90-140 Vrms
90 Vrms
10 Vrms
15 mA
CTRC6025
180-280 Vrms
180 Vrms
10 Vrms
19 mA
Control Voltage Range
Minimum Turn-On Voltage
Must Turn-Off Voltage
Minimum Input Current (5)
Maximum Input Current (5)
Maximum Turn-On Time [msec] (6)
Maximum Turn-Off Time [msec]
28 mA
19 mA
20
30
24 mA
20
30
1/2 Cycle
1/2 Cycle
24/16 AWG
Min/Max stranded/solid wire
24/16 AWG
24/16 AWG
GENERAL SPECIFICATIONS (1)
Description
Dielectric Strength, Input/Output/Base (50/60Hz)
Minimum Insulation Resistance (@ 500 VDC)
Parameters
4000 Vrms
109 Ohm
Maximum Capacitance, Input/Output
Ambient Operating Temperature Range (7)
Ambient Storage Temperature Range
Status Indicator Display
8 pF
-20 to 80°C
-40 to 100 °C
Green LED
21.2 oz. (600g)
Box Clamp Type
5.0-6.0 in lib (0.6-0.7 Nm)
0.8 inch (20mm)
Weight (typical)
Terminals
Recommended Terminal Screw Torque Range:
Min. Side bye Side Spacing
MECHANICAL SPECIFICATIONS (1)
Tolerances: 0.02 ꢀn ꢁ 0.5 ꢂꢂ
All dꢀꢂensꢀons are ꢀn: ꢀnches [ꢂꢀllꢀꢂeters]
3.54
[90.0]
4.86
[123.4]
3.26
[82.8]
3.59
[91.2]
3.82
[97.0]
3.47
[88.1]
0.18
[4.5]
3.26
[82.8]
GENERAL NOTES
(1) All parameters at 25°C unless otherwise specified.
(2) See Derating Curves.
(3) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1
(4) At 40°C Ambient temperature.
(5) Turn-on time for DC control Instantaneous turn-on versions is 0.05 msec.
(6) Input circuitry incorporates active current limiter.
(7) For 180-280 VAC Control. Maximum Ambient operating temperatures is 60°C.
For additional information or specific questions, contact Crydom Technical Support.
Do not forget to visit us at: www.crydom.com
Copyright © 2016 Crydom Inc. Specifications subject to change without notice.
DIN Rail Mount
Datasheet
WIRING DIAGRAM
LOAD
A
L3
AC
+
-
A1
A2
Load can be wired in Position A or B
B
LOAD
T3
L2
AC
AC
LOAD
A
Load can be wired in Position A or B
B
LOAD
AC
AC
T2
L1
LOAD
A
Load can be wired in Position A or B
B
T1
LOAD
AC
THERMAL DERATE INFORMATION
Derating curve: CTR Series
25
20
CTRB6025
CTRD6025
15
10
5
CTRC6025
0
30
40
50
60
70
80
Ambient Temperature (ºC)
Do not forget to visit us at: www.crydom.com
Copyright © 2016 Crydom Inc. Specifications subject to change without notice.
DIN Rail Mount
Datasheet
AGENCY APPROVALS
Agency Approvals
Designed in accordance with the requirements of IEC 62314
E79183
EMC Compatibility
IEC 62314
IEC 60068-2-6 35mm/10-55Hz
IEC 60068-2-27 15G / 11ms
IEC 61000-4-2 Level 3 Electrostatic Discharge
IEC 61000-4-3 Level 3 Radiated Electromagnetic Noise
IEC 61000-4-4 Level 3 Immunity to Electrically Fast Transients
IEC 61000-4-5 Level 3 Immunity to Electrical Surges
IEC 61000-4-6 Level 3 Conducted Electromagnetic Noise
CISPR 11 Class A Conducted and Radiated Noise for Industrial Environments
Pollution Degree 2
Rev. 053116
Overvoltage Category III
Do not forget to visit us at: www.crydom.com
Copyright © 2016 Crydom Inc. Specifications subject to change without notice.
DIN Rail Mount
Datasheet
DANGER / PELIGRO / DANGER /GEFAHR / PERICOLO / 危险
HAZARD OF
ELECTRIC
SHOCK,
EXPLOSION,
OR ARC FLASH.
RIESGO DE
DESCARGA
ELECTRICA O
EXPLOSION.
RISQUE DE
GEFAHR EINES
ELEKTRISCHE
N SCHLAGES
ODER EINER
EXPLOSION.
RISCHIO DI
SCOSSA
ELETTRICA O
DELL’ESPLOSIONE.
存在电击、
爆炸或电弧
闪烁危险
DESCHARGE
ELECTRIQUE
OU EXPLOSION
•
在操作此设
备之前请先
关闭电源。
• Eteindre
toutes les
sources
d'énergie de
cet appareil
avant de
travailler
dessus de cet
appareil
• Spenga tutta
l'alimentazione
che fornisce
questa
apparecchiatura
prima di lavorare
a questa
• Desconectar
todos los
suministros de
energia a este
equipo antes
de trabajar
• Disconnect all
power before
installing or
working with
this equipment.
• Stellen Sie
jeglichen
Strom ab, der
dieses Gerät
versorgt, bevor
Sie an dem
若不遵守这些说明,
可能会导致严重的
人身伤害甚至死亡。
con este equipo.
• Verify all
connections
and replace all
covers before
turning on
Gerät Arbeiten
durchführen
apparecchiatura
• Verificar todas
las conexiones
y colocar todas
las tapas antes
de energizer
• Verificare tutti
i collegamenti
e sostituire
tutte le coperture
prima
• Vor dem
Drehen auf
Energie alle
Anschlüsse
überprüfen
und alle
• Vérifier tous
connections, et
remettre tous
couverts en
olace avant de
mettre sous
power.
el equipo.
Failure to follow
these
instructions will
result in death
or serious injury.
dell’accensione
El
Abdeckungen
ersetzen.
L'omissione di
queste istruzioni
provocherà la
morte o
incumplimiento
de estas
instrucciones
puede provocar
la muerte o
lesiones serias.
De non-suivi de
ces instructions
provoquera la
mort ou des
lésions sérieuses
sérieuses.
Unterlassung
dieser
Anweisungen
können zum
Tode oder zu
schweren
lesioni serie
Verletzungen
führen.
WARNING / AVERTISSEMENT / WARNUNG /ADVERTENCIA / AVVERTENZA / 警告
RISQUE DE DOMMAGE MATERIEL ET DE
SURCHAUFFE DU BOITIER
GEFAHR VON MATERIALSCHÄDEN UND
GEHÄUSEERHITZUNG
RISK OF MATERIAL DAMAGE AND HOT
ENCLOSURE
• Les panneaux latéraux du produit peuvent être
chauds. Laisser le produit refroidir avant de le
toucher.
• Respecter les consignes de montage, et
notamment les couples de serrage.
• Ne pas laisser pénétrer de liquide ni de corps
étrangers à l'intérieur du produit.
• Die Seitenwände können heiß sein. Lassen Sie
das Produkt abkühlen, bevor Sie es berühren.
• Beachten Sie die Montageanweisungen,
• Führen Sie keine Flüssigkeiten oder
• The product's side panels may be hot, allow
the product to cool before touching.
• Follow proper mounting instructions including
torque values.
• Do not allow liquids or foreign objects to enter
this product.
Fremdkörper in das Produkt ein.
Le non-respect de cette directive peut entraîner,
des lésions corporelles graves ou des
dommages matériels.
Die Nichtbeachtung dieser Anweisung kann
Körperverletzung oder Materialschäden
zur Folge haben.
Failure to follow these instructions can result in
serious injury, or equipment damage.
RIESGO DE DAÑOS MATERIALES Y DE
SOBRECALENTAMIENTO DE LA UNIDAD
材料损坏和高温外壳的危险性
RISCHIO DI DANNI MATERIALI E D'INVOLUCRO
CALDO
• 产品的一侧面板可能很热,在其冷却前请
不要触碰。
• 遵照正确的安装说明,包括扭矩值。
• 请勿让液体及其他异物进入本产品。
• Los paneles laterales del producto pueden
estar calientes. Esperar que el producto se
enfríe antes de tocarlo.
• Respetar las instrucciones de montaje, y en
particular los pares de apretado.
• I pannelli laterali dell'apparecchio possono
scottare; lasciar quindi raffreddare il prodotto
prima di toccarlo.
• Seguire le istruzioni di montaggio corrette.
• Non far entrare liquidi o oggetti estranei in questo
apparecchio.
• No dejar que penetren líquidos o cuerpos
extraños en el producto.
La mancata osservanza di questa precauzione può
causare gravi rischi per l'incolumità personale o
danni alle apparecchiature.
如不能正确执行这些操作说明,
极有可能造成严重人体伤害或者设备的损坏。
Si no se respetan estas precauciones pueden
producirse graves lesiones, daños materiales.
Do not forget to visit us at: www.crydom.com
Copyright © 2016 Crydom Inc. Specifications subject to change without notice.
DIN Rail Mount
Datasheet
ANNEX - ENVIROMENTAL INFORMATION
The environmental information disclosed in this annex including the EIP Pollution logo are in compliance with People’s Republic of China
Electronic Industry Standard SJ/T11364 – 2006, Marking for Control of Pollution Caused by Electronic Information Products.
Part
Name
Toxic or hazardous Substance and Elements
Lead
(Pb)
Mercury
(Hg)
Cadmium
(Cd)
Hexavalent
Chromium
(Cr (VI))
Polybrominated
biphenyls
(PBB)
Polybrominated
diphenyl ethers
(PBDE)
Semiconductor die
Solder
附件 - 环保信息
此附件所标示的包括电子信息产品污染图标的环保信息符合中华人民共和国电子行业标准 SJ/T11364 - 2006,
电子信息产品污染控制标识要求。
部件
名称
有毒有害物质或元素
铅
(Pb)
汞
(Hg)
镉
(Cd)
六价铬
(Cr (VI))
多溴联苯
(PBB)
多溴二苯醚
(PBDE)
半导体芯片
焊接点
50
Do not forget to visit us at: www.crydom.com
Copyright © 2016 Crydom Inc. Specifications subject to change without notice.
相关型号:
CRU-12-L-S-G-Y-TH
Telecom and Datacom Connector, 12 Contact(s), Female, Straight, Solder Terminal
SAMTEC
CRU-12-L-S-N-N-TH
Telecom and Datacom Connector, 12 Contact(s), Female, Straight, Solder Terminal
SAMTEC
CRU-12-L-S-Y-G-TH
Telecom and Datacom Connector, 12 Contact(s), Female, Straight, Solder Terminal
SAMTEC
CRU-12-S-S-G-Y-TH
Telecom and Datacom Connector, 12 Contact(s), Female, Straight, Solder Terminal
SAMTEC
CRU-12-S-S-N-N-TH
Telecom and Datacom Connector, 12 Contact(s), Female, Straight, Solder Terminal
SAMTEC
©2020 ICPDF网 联系我们和版权申明