D1210-10 [CRYDOM]
PCB Mount; 印刷电路板安装
| 型号： | D1210-10 |
| 厂家： | 
CRYDOM INC., |
| 描述： | PCB Mount |
| 文件： | 总4页 (文件大小：501K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
D2W Series
• SIP SSR
• Ratings to 3.5A @ 280 VAC
• DC control
• Zero-crossing (resistive loads) output
• Internal snubber network
PRODUCT SELECTION
Control Voltage
3-32 VDC
2A
D2W202F
3A
D2W203F
3.5A
D2W203F-11
OUTPUT SPECIFICATIONS (1)
Description
Operating Voltage (47-63Hz) [Vrms]
24-280
600
8
200
2
24-280
600
8
200
3
24-280
600
8
200
3.5
Transient Overvoltage [Vpk]
Maximum Off-State Leakage Current @ Rated Voltage [mArms]
Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] (3)
Maximum Load Current [Arms]
Minimum Load Current [Arms]
Maximum Surge Current (16.6ms) [Apk]
0.06
28
0.06
70
0.06
80
Maximum On-State Voltage Drop @ Rated Current [Vpk]
Minimum Power Factor (with Maximum Load)
1.4
0.5
1.4
0.5
1.4
0.5
INPUT SPECIFICATIONS (1)
Description
Control Voltage Range
3-32 VDC
Must Turn On Voltage
Must Turn Off Voltage
3.0 VDC
1.0 VDC
Typical Input Current @ 5 VDC
Nominal Input Impedance
Maximum Turn-On Time [msec]
Maximum Turn-Off Time [msec]
3.0 mAdc
1500 Ohm
1/2 Cycle
1/2 Cycle
GENERAL SPECIFICATIONS
Description
Parameters
4000 Vrms
10 9 Ohm
Dielectric Strength, Input/Output/Base (50/60Hz)(2)
Minimum Insulation Resistance (@ 500 VDC)(2)
Maximum Capacitance, Input/Output
Ambient Operating Temperature Range
Ambient Storage Temperature Range
Weight (typical)
10 pF
-30 to 80°C
-30 to 125°C
0.6 oz. (17g)
Encapsulation
Thermally Conductive Epoxy
GENERAL NOTES
1) All parameters at 25°C unless otherwise specified.
2) Dielectric and insulation resistance are measured between input and output
3) Off-State dv/dt test method per EIA/NARM standard RS
For Contact information visit our web
site.
©2008 Crydom, Inc.
Specifications subject to change without notice.
www.crydom.com
MECHANICAL SPECIFICATIONS
PIN 1: AC LOAD
PIN 2: AC LOAD
PIN 3: +DC CONTROL
PIN 4: -DC CONTROL
THERMAL DERATE INFORMATION
AGENCY APPROVALS
UL E116950
CSA LR81689
Rev. 061608
For Contact information visit our web
site.
©2008 Crydom, Inc.
Specifications subject to change without notice.
www.crydom.com
For Contact information visit our web
site.
©2008 Crydom, Inc.
Specifications subject to change without notice.
www.crydom.com
ANNEX - ENVIROMENTAL INFORMATION
For Contact information visit our web
site.
©2008 Crydom, Inc.
Specifications subject to change without notice.
www.crydom.com
相关型号：
D121001005FP0-E3
RESISTOR, METAL GLAZE/THICK FILM, 0.125W, 1%, 100ppm, 10000000ohm, SURFACE MOUNT, 0805, CHIP
VISHAY
D121001022FP5-PB
RESISTOR, METAL GLAZE/THICK FILM, 0.125W, 1%, 100ppm, 10200ohm, SURFACE MOUNT, 0805, CHIP
VISHAY
D121001024FP5
Fixed Resistor, Metal Glaze/thick Film, 0.125W, 1020000ohm, 150V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 0805, CHIP
VISHAY
D1210010520.5%P0
RESISTOR, METAL GLAZE/THICK FILM, 0.1W, 0.5%, 100ppm, 10500ohm, SURFACE MOUNT, 0805, CHIP
VISHAY
D121001073FP5-E3
RESISTOR, METAL GLAZE/THICK FILM, 0.125W, 1%, 100ppm, 107000ohm, SURFACE MOUNT, 0805, CHIP
VISHAY
D121001101FP5-PB
RESISTOR, METAL GLAZE/THICK FILM, 0.125W, 1%, 100ppm, 1100ohm, SURFACE MOUNT, 0805, CHIP
VISHAY
D1210011021%P0
Fixed Resistor, Metal Glaze/thick Film, 0.1W, 11000ohm, 150V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 0805, CHIP
VISHAY
D1210011030.5%P0
RESISTOR, METAL GLAZE/THICK FILM, 0.1W, 0.5%, 100ppm, 110000ohm, SURFACE MOUNT, 0805, CHIP
VISHAY
D1210011030.5%P5
RESISTOR, METAL GLAZE/THICK FILM, 0.1W, 0.5%, 100ppm, 110000ohm, SURFACE MOUNT, 0805, CHIP
VISHAY
D1210011031%P0
Fixed Resistor, Metal Glaze/thick Film, 0.1W, 110000ohm, 150V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 0805, CHIP
VISHAY
D1210011040.5%P5
RESISTOR, METAL GLAZE/THICK FILM, 0.1W, 0.5%, 100ppm, 1100000ohm, SURFACE MOUNT, 0805, CHIP
VISHAY
©2020 ICPDF网 联系我们和版权申明