DR24A12XR [CRYDOM]
Ratings of 6 & 12 Amps;型号: | DR24A12XR |
厂家: | CRYDOM INC., |
描述: | Ratings of 6 & 12 Amps |
文件: | 总7页 (文件大小:929K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
DIN Rail Mount
DataSheet
AC
DC
SeriesOne DR Series
ATEX
• Ratings of 6 & 12 Amps
• Load voltage ratings of 1-60VDC, 1-100VDC, 24-280VAC and 48-600VAC
• Fits standard 35mm DIN Rail
• LED input status indicator
• AC or DC control
• Zero Voltage (resistive loads) or Instantaneous (inductive loads) turn-on output
• UL and cUL Listed, HP Rated CE & RoHS Compliant
• UL 508 Endurance Rating for Enhanced Reliability
• UL Class I and II, Division 2, for Hazardous Locations
PRODUCT SELECTION
Control Voltage
4-32 VDC
90-140 VAC
200-280 VAC
18-36 VAC
280, 6 A
280 V, 12 A
DR24D12X
DR24B12X
DR24A12X
DR24E12X
600 V, 6 A
DR48D06X
600 V, 12 A
DR48D12X
DR48B12X
DR48A12X
DR48E12X
60 V, 6 A
DR06D06X
60 V, 12 A
DR06D12X
100 V, 6 A
DR10D06X
100 V, 12 A
DR10D12X
DR24D06X
DR24B06X
DR24A06X
DR24E06X
AVAILABLE OPTIONS
Switching Type
Operating Voltage
Blank: Zero Voltage Turn-On
06: 1-60 VDC
(AC Output Only)
R: Instantaneous Turn-On
(AC Output, D suffix Only)
10: 1-100 VDC
24: 24-280 VAC
48: 48-600 VAC
Rated Load Current
06: 6 Amps
12: 12 Amps
Series
DR
06
D
12
X
R
Control Voltage
Agency Approvals
X: ATEX II 3G Ex nA IIC T4 Gc
approved
D: 4-32 VDC
A: 200-265 VAC
B: 90-140 VAC
E: 18-36 VAC (1)
AC
Output
Only
Required for valid part number
For options only and not required for valid part number
(2)
OUTPUT SPECIFICATIONS AC Output
Description
Operating Voltage Range (47-63Hz) [Vrms]
Transient Overvoltage [Vpk]
DR24x06X
24-280
600
DR24x12X
24-280
600
DR48x06X
48-600
1200
DR48X12X
48-600
1200
Maximum Load Current, resistive [Arms] (3)
Minimum Load Current [mArms]
6
150
12
150
6
150
12
150
Maximum Off-State Leakage Current @ Rated Voltage [mArms]
Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] (4)
Maximum On-State Voltage Drop @ Rated Current [Vrms]
Maximum Surge Current (50/60Hz, 1 cycle) [Apk]
Maximum I²t for Fusing (50/60 Hz, 1/2 cycle) [A² sec]
HP Rating UL 508/IEC60947 [HP (KW)] @ 240V
HP Rating UL 508/IEC60947 [HP (KW)] @ 380V
HP Rating UL 508/IEC60947 [HP (KW)] @ 480V
Minimum Power Factor (at Maximum Load)
Min/Max stranded wire
0.1
500
1.3
285/300
400/375
1/2 (.37)
N/A
N/A
0.5
0.1
500
1.3
715/750
2560/2330
1 (.75)
N/A
N/A
0.5
0.1
500
1.3
0.1
500
1.3
715/750
2560/2330
1 (.75)
2 (1.5)
3 (2.2)
285/300
410/375
1/2 (.37)
1 (1.5)
2 (1.5)
0.5
22/14 AWG
22/14 AWG
1.76 oz. (50g)
0.5
22/14 AWG
22/14 AWG
1.76 oz. (50g)
22/14 AWG
22/14 AWG
3.17 oz. (90g)
22/14 AWG
22/14 AWG
3.17 oz. (90g)
Min/Max solid wire
Weight (Typical)
Do not forget to visit us at: www.crydom.com
Copyright © 2017 Crydom Inc. Specifications subject to change without notice.
DIN Rail Mount
DataSheet
(2)
OUTPUT SPECIFICATIONS DC Output
Description
DR06D06X
DR10D06X
1-100
DR06D12X
DR10D12X
Operating Voltage [VDC]
Maximum Load Current [Adc] (3)
1-60
1-60
12
1-100
12
6
6
Minimum Load Current [mAdc]
2.5
0.1
0.6
60
0.1
2.5
0.1
0.6
60
0.1
22/14 AWG
22/14 AWG
1.76 oz. (50g)
2.5
0.1
0.6
100
0.45
22/14 AWG
22/14 AWG
3.17 oz (90g)
2.5
0.1
0.6
Maximum Off-State Leakage Current @ Rated Voltage [mA]
Maximum On-State Voltage Drop @ Rated Current [Vpk]
Maximum Surge Current (10ms) [Apk]
On-State resistance at rated current [Ohms]
Min/Max stranded wire
100
0.45
22/14 AWG
22/14 AWG
3.17 oz.(90g)
22/14 AWG
22/14 AWG
1.94 oz. (55g)
Min/Max solid wire
Weight (typical)
(2)
INPUT SPECIFICATIONS
Description
DRxxDxxX
4-32 VDC
4.0 VDC
1.0 VDC
9
DRxxBxxX
90-140 Vrms
90 Vrms
10 Vrms
3
DRxxAxxX
DRxxExxX
Control Voltage Range (5)
200-265 Vrms
200 Vrms
40 Vrms
2.5
18-36 Vrms (1)
18 Vrms
4 Vrms
3.5
Minimum Turn-On Voltage
Must Turn-Off Voltage
Minimum Input Current for [mA] (6)
Maximum Input Current for [mA] (6)
Maximum Turn-on Time [msec] (7) (8)
Maximum Turn-off Time [msec] (9)
Min/Max stranded/solid wire
5
11
3.3
8
1/2 Cycle
1/2 Cycle
22/16 AWG
20 msec
30 msec
22/16 AWG
20 msec
30 msec
22/16 AWG
20 msec
30 msec
22/16 AWG
(2)
GENERAL SPECIFICATIONS
Description
Parameters
4000 Vrms (10)
109 Ohm
10 pF
-20 to 40 °C
-30 to 100 °C
Dielectric Strength, Input/Output/Base (50/60Hz)
Minimum Insulation Resistance (@ 500 VDC)
Maximum Capacitance, Input/Output
Ambient Operating Temperature Range
Ambient Storage Temperature Range
Recommended Terminal Screw Torque Range
4.4-7.0 in-lb (0.5-0.8Nm)
GENERAL NOTES
(1) E option is UL certified for AC control voltage, but it works also with 18-36 VDC input range.
(2) All parameters at 25°C unless otherwise specified.
(3) See Derating curves
(4) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1
(5) DC control includes reverse polarity protection.
(6) Input circuitry incorporates active current limiter.
(7) Turn-on time for DC control random turn-on versions is 0.1 msec.
(8) Turn-on time for DC output 600µsec.
(9) Turn-off time for DC output 300µsec.
(10) 2500Vrms for DC output.
Standards of Compliance
IEC 62314
LC A, Resistive or Slightly Inductive Load Ratings: 12 A @40°C ambient for DR24x12X, 12 A @ 40°C ambient for DR48x12X
LC A, Resistive or Slightly Inductive Load Ratings: 6 A @ 40°C ambient for DR24x06X, 6 A @ 40°C ambient for DR48x06X
LC B, Motor Loads Ratings: 0.75KW @ 240 VAC for DR24x06X and 2.2KW @ 480 VAC DR48x12X
LC B, Motor Loads Ratings: 0.375KW @ 240 VAC for DR24x06X and 1.5KW @ 480 VAC DR48x12X
Shock and Vibration (Applies to all part numbers)
Vibration Resistence according to IEC 60068-2-6: 0.35mm and 0.75mm Amplitude over 10-55 Hz
Shock Resistance according to IEC 60068-2-27: 15g/11ms
EMC (Applies to all part numbers)
IEC 61000-4-2: Electrostatic Discharge- Level 3
IEC 61000-4-4: Electrically Fast Transients- Level 3
IEC 61000-4-5: Electrical Surges- Level 3
ANSI / ISA 12.12.01-2013
Nonincendive Electrical Equipment for Use in Class I and II, Division 2 and Class III, Division 1 and 2 Hazadous (classified) locations
This equipment is open-type device and is meant to be installed in an enclosure suitable for the enviroment such that the equipment is only accesible with the use of a tool
suitable for use in Class 1, Division 2, Group A,B,C and Hazardous locations, or Nonhazardous locations only
WARNING-Explosion Hazard- Do not disconnect equipment while the circuit is live or unless the area is known to be free of ignitable concentrations
WARNING-Explosion Hazard- Substitution of any component may impair suitability for Class I, Division 2
ATEX
Compliance with Essential Health and Safety Requirements has been assessed by reference to Standards EN 60079-0:2012+A11:2013
and EN 60079-15-:2010
Do not forget to visit us at: www.crydom.com
Copyright © 2017 Crydom Inc. Specifications subject to change without notice.
DIN Rail Mount
DataSheet
MECHANICAL SPECIFICATIONS (2)
EQUIVALENT CIRCUIT BLOCK DIAGRAMS/WIRING DIAGRAMS
Do not forget to visit us at: www.crydom.com
Copyright © 2017 Crydom Inc. Specifications subject to change without notice.
DIN Rail Mount
DataSheet
THERMAL DERATE INFORMATION
Derating Curves are not approved for the ATEX Certification
DRxxx06X
6
5
4
3
2
1
0
0
10
20
30
40
50
60
70
80
Ambient Temperature (ºC)
DRxxx12X
12
10
8
6
4
2
0
0
10
20
30
40
50
60
70
80
Ambient Temperature (ºC)
Installed single unit, distance to adjacent components ≥ 11 mm for DRxxx06X & ≥ 18mm for DRxxx12X
Multiple units, no minimum spacing between components
AGENCY APPROVALS
Agency Approvals
E364559
II 3G Ex nA IIC T4 Gc
IND. CONT. EQ.
4WB8
Rev 052516
Do not forget to visit us at: www.crydom.com
Copyright © 2017 Crydom Inc. Specifications subject to change without notice.
DIN Rail Mount
DataSheet
ACCESORIES
Do not forget to visit us at: www.crydom.com
Copyright © 2017 Crydom Inc. Specifications subject to change without notice.
DIN Rail Mount
DataSheet
DANGER / PELIGRO / DANGER /GEFAHR / PERICOLO / 危险
HAZARD OF
ELECTRIC
SHOCK,
EXPLOSION,
OR ARC FLASH.
RIESGO DE
DESCARGA
ELECTRICA O
EXPLOSION.
RISQUE DE
GEFAHR EINES
ELEKTRISCHE
N SCHLAGES
ODER EINER
EXPLOSION.
RISCHIO DI
SCOSSA
ELETTRICA O
DELL’ESPLOSIONE.
存在电击、
爆炸或电弧
闪烁危险
DESCHARGE
ELECTRIQUE
OU EXPLOSION
•
在操作此设
备之前请先
关闭电源。
• Eteindre
toutes les
sources
d'énergie de
cet appareil
avant de
travailler
dessus de cet
appareil
• Spenga tutta
l'alimentazione
che fornisce
questa
apparecchiatura
prima di lavorare
a questa
• Desconectar
todos los
suministros de
energia a este
equipo antes
de trabajar
• Disconnect all
power before
installing or
working with
this equipment.
• Stellen Sie
jeglichen
Strom ab, der
dieses Gerät
versorgt, bevor
Sie an dem
若不遵守这些说明,
可能会导致严重的
人身伤害甚至死亡。
con este equipo.
• Verify all
connections
and replace all
covers before
turning on
Gerät Arbeiten
durchführen
apparecchiatura
• Verificar todas
las conexiones
y colocar todas
las tapas antes
de energizer
• Verificare tutti
i collegamenti
e sostituire
tutte le coperture
prima
• Vor dem
Drehen auf
Energie alle
Anschlüsse
überprüfen
und alle
• Vérifier tous
connections, et
remettre tous
couverts en
olace avant de
mettre sous
power.
el equipo.
Failure to follow
these
instructions will
result in death
or serious injury.
dell’accensione
El
Abdeckungen
ersetzen.
L'omissione di
queste istruzioni
provocherà la
morte o
incumplimiento
de estas
instrucciones
puede provocar
la muerte o
lesiones serias.
De non-suivi de
ces instructions
provoquera la
mort ou des
lésions sérieuses
sérieuses.
Unterlassung
dieser
Anweisungen
können zum
Tode oder zu
schweren
lesioni serie
Verletzungen
führen.
WARNING / AVERTISSEMENT / WARNUNG /ADVERTENCIA / AVVERTENZA / 警告
RISQUE DE DOMMAGE MATERIEL ET DE
SURCHAUFFE DU BOITIER
GEFAHR VON MATERIALSCHÄDEN UND
GEHÄUSEERHITZUNG
RISK OF MATERIAL DAMAGE AND HOT
ENCLOSURE
• Les panneaux latéraux du produit peuvent être
chauds. Laisser le produit refroidir avant de le
toucher.
• Respecter les consignes de montage, et
notamment les couples de serrage.
• Ne pas laisser pénétrer de liquide ni de corps
étrangers à l'intérieur du produit.
• Die Seitenwände können heiß sein. Lassen Sie
das Produkt abkühlen, bevor Sie es berühren.
• Beachten Sie die Montageanweisungen,
• Führen Sie keine Flüssigkeiten oder
• The product's side panels may be hot, allow
the product to cool before touching.
• Follow proper mounting instructions including
torque values.
• Do not allow liquids or foreign objects to enter
this product.
Fremdkörper in das Produkt ein.
Le non-respect de cette directive peut entraîner,
des lésions corporelles graves ou des
dommages matériels.
Die Nichtbeachtung dieser Anweisung kann
Körperverletzung oder Materialschäden
zur Folge haben.
Failure to follow these instructions can result in
serious injury, or equipment damage.
RIESGO DE DAÑOS MATERIALES Y DE
SOBRECALENTAMIENTO DE LA UNIDAD
材料损坏和高温外壳的危险性
RISCHIO DI DANNI MATERIALI E D'INVOLUCRO
CALDO
• 产品的一侧面板可能很热,在其冷却前请
不要触碰。
• 遵照正确的安装说明,包括扭矩值。
• 请勿让液体及其他异物进入本产品。
• Los paneles laterales del producto pueden
estar calientes. Esperar que el producto se
enfríe antes de tocarlo.
• Respetar las instrucciones de montaje, y en
particular los pares de apretado.
• I pannelli laterali dell'apparecchio possono
scottare; lasciar quindi raffreddare il prodotto
prima di toccarlo.
• Seguire le istruzioni di montaggio corrette.
• Non far entrare liquidi o oggetti estranei in questo
apparecchio.
• No dejar que penetren líquidos o cuerpos
extraños en el producto.
La mancata osservanza di questa precauzione può
causare gravi rischi per l'incolumità personale o
danni alle apparecchiature.
如不能正确执行这些操作说明,
极有可能造成严重人体伤害或者设备的损坏。
Si no se respetan estas precauciones pueden
producirse graves lesiones, daños materiales.
Do not forget to visit us at: www.crydom.com
Copyright © 2017 Crydom Inc. Specifications subject to change without notice.
DIN Rail Mount
DataSheet
ANNEX - ENVIROMENTAL INFORMATION
The environmental information disclosed in this annex including the EIP Pollution logo are in compliance with People’s Republic of China
Electronic Industry Standard SJ/T11364 – 2006, Marking for Control of Pollution Caused by Electronic Information Products.
Part
Name
Toxic or hazardous Substance and Elements
Lead
(Pb)
Mercury
(Hg)
Cadmium
(Cd)
Hexavalent
Chromium
(Cr (VI))
Polybrominated
biphenyls
(PBB)
Polybrominated
diphenyl ethers
(PBDE)
Semiconductor die
Solder
附件 - 环保信息
此附件所标示的包括电子信息产品污染图标的环保信息符合中华人民共和国电子行业标准 SJ/T11364 - 2006,
电子信息产品污染控制标识要求。
部件
名称
有毒有害物质或元素
铅
(Pb)
汞
(Hg)
镉
(Cd)
六价铬
(Cr (VI))
多溴联苯
(PBB)
多溴二苯醚
(PBDE)
半导体芯片
焊接点
50
Do not forget to visit us at: www.crydom.com
Copyright © 2017 Crydom Inc. Specifications subject to change without notice.
相关型号:
©2020 ICPDF网 联系我们和版权申明