H16WD6025G-10 [CRYDOM]

H16WD Series;


型号：	H16WD6025G-10
厂家：	CRYDOM INC.,
描述：	H16WD Series
文件：	总7页 (文件大小：946K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Panel Mount

Datasheet

H16WD Series

• Ratings from 25A to 90A @ 48-690 VAC

• 1600 Volts Blocking

• DC control

• Direct Bond Copper substrate

• EMC Compliant to Level 3

• Direct Power Lead Frame

• SCR output for heavy industrial loads

• Zero voltage or instantaneous turn-on outputs

• UL/CSA/VDE Approved, CE Compliant to EN60950-1 • Epoxy Free Design

• Improved SEMS screw and washer

• Redesigned housing with anti-rotation barriers

For Generation 3 datasheet click here

PRODUCT SELECTION

Control Voltage

4-32 Vdc

25A

H16WD6025

50A

H16WD6050

75A

H16WD6075

90A

H16WD6090

AVAILABLE OPTIONS

Rated Load Current

25: 25 Amps

50: 50 Amps

75: 75 Amps

90: 90 Amps

Input Status LED

Blank: Not Included

G: Included

Switching Type

Blank: Zero Voltage Turn-On

-10: Instantaneous Turn-On

Transient Overvoltage

6WD: 1600 Vpk

Series

(3)

6WD

-10

Operating Voltage

Termination

Thermal Pad

60: 48-690 VAC

Blank: Screw

F: Quick Connect (1)

(Up to 50 Amps models)

Blank: Not Included

H: Included

Required for valid part number

For options only and not required for valid part number

* Not all part number combinations are available.

Contact Crydom Technical Support for informacion on

the availability of a specific part number.

(2)

K: Hex standoffs

OUTPUT SPECIFICATIONS ⁽⁴⁾

Description

Operating Voltage (47-440Hz) [Vrms]

Transient Overvoltage [Vpk]

Rated Load Current [Arms] (5)(2)

25A

48-690

1600

50A

48-690

1600

75A

48-690

1600

90A

48-690

1600

Rated Load Current {UL508 Motor Controller} [Arms] (5)

Minimum Load Current [mArms]

150

Maximum Off-State Leakage Current @ Rated Voltage [mArms]

Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec]

Maximum 1 Cycle Surge Current (50/60Hz) [Apk]

Maximum I²t for Fusing (50/60Hz) [A² sec]

Thermal Resistance Junction to Case (Rjc) [°C/W]

Maximum On-State Voltage Drop @ Rated Current [Vrms]

HP rating UL 508/IEC60947[HP (KW)]: 240 VAC

HP rating UL 508/IEC60947[HP (KW)]: 380 VAC

HP rating UL 508/IEC60947[HP (KW)]: 480 VAC

HP rating UL 508/IEC60947[HP (KW)]: 600 VAC

Minimum Power Factor (at Maximum Load)

1.0

500

239/250

285/259

0.8

1.0

500

597/625

1779/1621

0.45

1.0

500

954/1000

4555/4150

0.3

1.0

500

1145/1200

6560/5976

0.27

1.3

1.2

1.5 (1.1)

2 (1.5)

3 (2.2)

0.5

3 (2.2)

5 (3.7)

10 (7.4)

0.5

5 (3.7)

7.5 (5.6)

10 (7.4)

15 (11.2)

0.5

7.5 (5.6)

15 (11.2)

20 (14.9)

25 (18.6)

0.5

Do not forget to visit us at: www.crydom.com

Panel Mount

Datasheet

INPUT SPECIFICATIONS⁽⁴⁾

Description

Control Voltage Range

Minimum Turn-On Voltage (6)

DC Control

4-32 VDC

4.0 VDC

Must Turn-Off Voltage

Maximum Reverse Voltage

1.0 VDC

-32 VDC

Minimum Input Current @ Minimum Voltage (for on-state)

Maximum Input Current @ Maximum Voltage

Nominal Input Impedance

Maximum Turn-On Time [msec] (7)

Maximum Turn-Off Time [msec]

7mA

12mA

Current Regulated

1/2 Cycle

GENERAL SPECIFICATIONS ⁽⁴⁾

Description

Dielectric Strength, Input/Output/Base (50/60Hz)

Minimum Insulation Resistance (@ 500 VDC)

Parameters

4000 Vrms

10⁹Ohm

Maximum Capacitance, Input/Output

Ambient Operating Temperature Range

Ambient Storage Temperature Range

Weight (typical)

8 pF

-30 to 80 °C

-40 to 125 °C

2.6 oz (74.9 g)

UL 94 V-0

Housing Material

SSR Mounting Torque Range [in lbs/Nm]

Baseplate Material

18-20 (2-2.2)

Aluminum

Input Terminal Screw Torque Range [in-lb/Nm]

Output Terminal Screw Torque Range [in lb/Nm]

SSR Mounting Screw Torque Range [in-lb/Nm]

Input/Load Terminal Screw Torque Range [in-lb/Nm] (2)

13-15 /1.5-1.7

18-20 (2-2.2)

18-20 / 2.0-2.2

w/”K” option 8-10 / 0.9-1.13

Input/Output Terminal Screw Thread Size

Humidity per IEC60068-2-78

LED Input Status Indicator

#6-32 UNC / #8-32 UNC

93% non-condensing

w/”G” option (green)

11,641,553 hours (1,328 years)

MTBF (Mean Time Between Failures) at 40°C ambient temperature (8)

7,210,376 hours (823 years)

MTBF (Mean Time Between Failures) at 60°C ambient temperature (8)

WIRING DIAGRAM

Input Current vs Input Voltage

Standard Regulated DC Input

Recommended Wire Sizes

Wire Size

(Solid / Stranded)

Wire Pull-Out

Strength (lb)[N]

Terminals

Input

Load (9)

2 (

24 AWG (0.2 mm²) / 0.2 [minimum]

2 x 12 AWG (3.3 mm²) / 3.3 [maximum]

20 AWG (0.5 mm²) / 0.518 [minimum]

2 x 10 AWG (5.3 mm²) / 5.3

10 [44.5]

90 [400]

30 [133]

110 [490]

90 [400]

1 (

)

Output

OUTPUT

S O L I D S T AT E R E L AY

2 x 8 AWG (8.4 mm²) / 8.4 [maximum]

INPUT

DC Input Voltage

4 (–)

3 (+)

EQUIVALENT CIRCUIT BLOCK DIAGRAM

(10)

Trigger

Circuit

+DC

Current

Limiter

Do not forget to visit us at: www.crydom.com

Panel Mount

Datasheet

MECHANICAL SPECIFICATIONS ⁽⁴⁾

Tolerances: ±±0±ꢀ ꢁn ꢂ ±0. ꢃꢃ

All dꢁꢃensꢁons are ꢁn: ꢁnches [ꢃꢁllꢁꢃeters]

(2)

Screw Termination

Hex Standoff Termination (“K” Option)

101

Mounting

±089

[ꢀꢀ06]

[ꢀ709]

10±4

[ꢀ604]

[ꢀ709]

Hole/Slot

0.19 [4.9]

DIA.

Mounting

±049

[1ꢀ04]

±049

[1ꢀ04]

Hole/Slot

0.19 [4.9]

DIA.

OUTPUT

S O L I D S T AT E R E L AY

ꢀ0ꢀ.

[.703]

107±

[430ꢀ]

1088

[4706]

S O L I D S T AT E R E L AY

ꢀ0ꢀ.

[.703]

1088

[4706]

107

[430ꢀ]

INPUT

±093

[ꢀ306]

10±

[ꢀ.04]

(4 places)

107.

[440.]

107.

[440.]

10±

[ꢀ.04]

(2 places)

Quick Connect Termination (“F” Option) - Up to 25 Amp (1)

Quick Connect Termination (“F” Option) - Up to 50 Amp (1)

Faston Terminal(11)

0.25 x 0.032

10.8

[4±0ꢀ]

±063

1031

[3304]

1031

[3304]

Faston Terminal(11)

0.25 x 0.032

[4±0ꢀ]

Mounting

Hole/Slot

0.19 [4.9]

DIA.

Mounting

Hole/Slot

0.19 [4.9]

DIA.

(4 places)

±049

[1ꢀ04]

(2 places)

[160±]

±04.

[1104]

(2 places)

OUTPUT

S O L I D S T AT E R E L AY

ꢀ0ꢀ.

[.703]

1088

[4706]

107

[430ꢀ]

ꢀ0ꢀ.

[.703]

1088

[4706]

107

[430ꢀ]

INPUT

±049

104±

Faston Terminal(11)

0.187 x 0.020

[1ꢀ04]

[3.06]

Faston Terminal(11)

0.187 x 0.020

104±

[3.06]

107.

10ꢀ.

[3108]

107.

[440.]

10ꢀ.

[3108]

(2 places)

[440.]

GENERAL NOTES

(1) Single pair (up to 25A) Double pair* (50A model only). *Caution: User must connect to both pairs.

(2) Option “K” is designed and tested for use with printed circuit boards or ring/fork terminals having a thickness between 0.031 and 0.093 inches (0.79 to 2.36 mm), and loads rated up to 50 Amps.

For higher load currents, the “K” standoff temperature must not exceed 105°C. For additional application assistance please contact Crydom Technical Support.

(3) Instantaneous turn-on version is not recomended for capacitive loads. Use zero turn-on only.

(4) All parameters at 25°C unless otherwise speciﬁed.

(5) Heat sinking required, see derating curves.

(6) Increase minimum voltage by 1V for operations from -20 to -30°C.

(7) Turn-on time for Instantaneous turn-on versions is 0.02 msec.

(8) All parameters at 50% power rating and 100% duty cycle (contact Crydom tech support for detailed report)

(9) Load can be wired to either SSR output terminal 1 or 2.

(10) Elective Input Status LED, “G” option.

(11) Mechanical dimensions vary from G3 models.

For additional information or speciﬁc questions, contact Crydom Technical Support.

Do not forget to visit us at: www.crydom.com

Panel Mount

Datasheet

SURGE CURRENT INFORMATION

25 A

50 A

250

600

500

400

300

200

100

200

150

100

0.01

0.1

0.01

0.1

Surge Duration (Secs)

75 A

90 A

900

1200

1050

900

750

600

450

300

150

800

700

600

500

400

300

200

100

0.01

0.1

Surge Duration (Secs)

Non repetitive peak surge current at Tj initial 40ºC.

THERMAL DERATE INFORMATION

25 A

50 A

1.5ºC/W

2ºC/W

3ºC/W

0.7ºC/W

1ºC/W

1.5ºC/W

2ºC/W

Ambient Temperature (ºC)

75 A

90 A

0.5ºC/W

0.7ºC/W

0.5ºC/W

0.7ºC/W

1ºC/W

1.5ºC/W

1ºC/W

1.5ºC/W

Ambient Temperature (ºC)

Do not forget to visit us at: www.crydom.com

Panel Mount

Datasheet

AGENCY APPROVALS

Designed in accordance with the requirements of IEC 62314

IEC 61000-4-2 : Electrostatic Discharge – Level 3

IEC 61000-4-4 : Electrically Fast Transients – Level 3

IEC 61000-4-5 : Electrical Surges – Level 3

IEC 600068-2-6: Vibration 0.33mm and 0.75mm Amplitude over 10-55 Hz

IEC 600068-2-27: Shock Resistance 15g/11ms

E116949

ACCESORIES

Recommended Accessories

New Accessories!

Protective Cover & Hardware Kits

Protective Cover

Part number: KS101

Cover

Hardware

Kit

Heat Sink

Part No.

Thermal Resistance Lug Terminal Thermal Pad

[ºC/W]

Clear plastic cover compatible with all new

S1 designs. Safety covers provide added

protection from electric shock when

installing or checking equipment.

5.0

HS501DR

KS101

HK1

HK4

TRM1

TRM6

HSP-1

HSP-2

3.0

2.5

2.0

1.7

1.5

1.2

1.0

0.7

0.5

0.36

0.25

HS301 / HS301DR

HS251

HS202 / HS202DR

HS201 / HS201DR

HS172

Hardware Kit

Part number: HK4

HS151 / HS151DR

HS122 / HS122DR

HS103 / HS103DR

HS101

Bag with 2 square brass accessories and 2

screw 8-32 x 5/8 for output. Used to mount

TMR1 lug terminals.

HS073

HS072

HS053

HS033

HS023

Rev. 040616

Do not forget to visit us at: www.crydom.com

Panel Mount

Datasheet

DANGER / PELIGRO / DANGER /GEFAHR / PERICOLO / 危险

HAZARD OF

ELECTRIC

SHOCK,

EXPLOSION,

OR ARC FLASH.

RIESGO DE

DESCARGA

ELECTRICA O

EXPLOSION.

RISQUE DE

GEFAHR EINES

ELEKTRISCHE

N SCHLAGES

ODER EINER

EXPLOSION.

RISCHIO DI

SCOSSA

ELETTRICA O

DELL’ESPLOSIONE.

存在电击、

爆炸或电弧

闪烁危险

DESCHARGE

ELECTRIQUE

OU EXPLOSION

•

在操作此设

备之前请先

关闭电源。

• Eteindre

toutes les

sources

d'énergie de

cet appareil

avant de

travailler

dessus de cet

appareil

• Spenga tutta

l'alimentazione

che fornisce

questa

apparecchiatura

prima di lavorare

a questa

• Desconectar

todos los

suministros de

energia a este

equipo antes

de trabajar

• Disconnect all

power before

installing or

working with

this equipment.

• Stellen Sie

jeglichen

Strom ab, der

dieses Gerät

versorgt, bevor

Sie an dem

若不遵守这些说明，

可能会导致严重的

人身伤害甚至死亡。

con este equipo.

• Verify all

connections

and replace all

covers before

turning on

Gerät Arbeiten

durchführen

apparecchiatura

• Verificar todas

las conexiones

y colocar todas

las tapas antes

de energizer

• Verificare tutti

i collegamenti

e sostituire

tutte le coperture

prima

• Vor dem

Drehen auf

Energie alle

Anschlüsse

überprüfen

und alle

• Vérifier tous

connections, et

remettre tous

couverts en

olace avant de

mettre sous

power.

el equipo.

Failure to follow

these

instructions will

result in death

or serious injury.

dell’accensione

Abdeckungen

ersetzen.

L'omissione di

queste istruzioni

provocherà la

morte o

incumplimiento

de estas

instrucciones

puede provocar

la muerte o

lesiones serias.

De non-suivi de

ces instructions

provoquera la

mort ou des

lésions sérieuses

sérieuses.

Unterlassung

dieser

Anweisungen

können zum

Tode oder zu

schweren

lesioni serie

Verletzungen

führen.

WARNING / AVERTISSEMENT / WARNUNG /ADVERTENCIA / AVVERTENZA / 警告

RISQUE DE DOMMAGE MATERIEL ET DE

SURCHAUFFE DU BOITIER

GEFAHR VON MATERIALSCHÄDEN UND

GEHÄUSEERHITZUNG

RISK OF MATERIAL DAMAGE AND HOT

ENCLOSURE

• Les panneaux latéraux du produit peuvent être

chauds. Laisser le produit refroidir avant de le

toucher.

• Respecter les consignes de montage, et

notamment les couples de serrage.

• Ne pas laisser pénétrer de liquide ni de corps

étrangers à l'intérieur du produit.

• Die Seitenwände können heiß sein. Lassen Sie

das Produkt abkühlen, bevor Sie es berühren.

• Beachten Sie die Montageanweisungen,

• Führen Sie keine Flüssigkeiten oder

• The product's side panels may be hot, allow

the product to cool before touching.

• Follow proper mounting instructions including

torque values.

• Do not allow liquids or foreign objects to enter

this product.

Fremdkörper in das Produkt ein.

Le non-respect de cette directive peut entraîner,

des lésions corporelles graves ou des

dommages matériels.

Die Nichtbeachtung dieser Anweisung kann

Körperverletzung oder Materialschäden

zur Folge haben.

Failure to follow these instructions can result in

serious injury, or equipment damage.

RIESGO DE DAÑOS MATERIALES Y DE

SOBRECALENTAMIENTO DE LA UNIDAD

材料损坏和高温外壳的危险性

RISCHIO DI DANNI MATERIALI E D'INVOLUCRO

CALDO

• 产品的一侧面板可能很热，在其冷却前请

不要触碰。

• 遵照正确的安装说明，包括扭矩值。

• 请勿让液体及其他异物进入本产品。

• Los paneles laterales del producto pueden

estar calientes. Esperar que el producto se

enfríe antes de tocarlo.

• Respetar las instrucciones de montaje, y en

particular los pares de apretado.

• I pannelli laterali dell'apparecchio possono

scottare; lasciar quindi raffreddare il prodotto

prima di toccarlo.

• Seguire le istruzioni di montaggio corrette.

• Non far entrare liquidi o oggetti estranei in questo

apparecchio.

• No dejar que penetren líquidos o cuerpos

extraños en el producto.

La mancata osservanza di questa precauzione può

causare gravi rischi per l'incolumità personale o

danni alle apparecchiature.

如不能正确执行这些操作说明，

极有可能造成严重人体伤害或者设备的损坏。

Si no se respetan estas precauciones pueden

producirse graves lesiones, daños materiales.

Do not forget to visit us at: www.crydom.com

Panel Mount

Datasheet

ANNEX - ENVIROMENTAL INFORMATION

The environmental information disclosed in this annex including the EIP Pollution logo are in compliance with People’s Republic of China

Electronic Industry Standard SJ/T11364 – 2006, Marking for Control of Pollution Caused by Electronic Information Products.

Part

Name

Toxic or hazardous Substance and Elements

Lead

(Pb)

Mercury

(Hg)

Cadmium

(Cd)

Hexavalent

Chromium

(Cr (VI))

Polybrominated

biphenyls

(PBB)

Polybrominated

diphenyl ethers

(PBDE)

Semiconductor die

Solder

附件 - 环保信息

此附件所标示的包括电子信息产品污染图标的环保信息符合中华人民共和国电子行业标准 SJ/T11364 - 2006,

电子信息产品污染控制标识要求。

部件

名称

有毒有害物质或元素

铅

(Pb)

汞

(Hg)

镉

(Cd)

六价铬

(Cr (VI))

多溴联苯

(PBB)

多溴二苯醚

(PBDE)

半导体芯片

焊接点

Do not forget to visit us at: www.crydom.com

H16WD6025G-10 [CRYDOM]

相关型号：

H16WD6025GH-10

H16WD6025_13

H16WD6050

H16WD6050-10

H16WD6050G

H16WD6050G-10

H16WD6075

H16WD6075G

H16WD6075G-10

H16WD6090

H16WD6090-10

H16WD6090G-10