H0503RN-2W [CRYSTEKMICROWAVE]
2W, FIXED INPUT,6000V ISOLATED & UNREGULATED SINGLE OUTPUT DC-DC CONVERTER; 2W ，定电压输入， 6000V隔离非稳压单路输出DC -DC转换器
| 型号： | H0503RN-2W |
| 厂家： | 
CRYSTEK CORPORATION |
| 描述： | 2W, FIXED INPUT,6000V ISOLATED & UNREGULATED SINGLE OUTPUT DC-DC CONVERTER |
| 文件： | 总3页 (文件大小：314K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
H_RN-2W & H_LT-2W Series
2W, FIXED INPUT,6000V ISOLATED & UNREGULATED
SINGLE OUTPUT DC-DC CONVERTER
Patent Protection RoHS
FEATURES
PRODUCT PROGRAM
Input
Part
Output
● High Efficiency up to 80%
● DIP/SMD Package
● 6kVDC Isolation
Efficiency
(%, Typ.)
Certificate*
Voltage (VDC)
Current (mA)
Voltage
(VDC)
Number
Nominal Range
Max.
606
400
223
167
133
400
223
167
133
400
223
167
133
400
223
167
133
400
223
167
133
400
400
223
167
133
Min.
60
40
22
17
13
40
22
17
13
40
22
17
13
40
22
17
13
40
22
17
13
40
40
22
17
13
● Temperature Range: -40°C ~ +85°C
● Internal SMD Construction
● No Heatsink Required
● No External Component Required
● Continuous Short Circuit Protection
● Industry Standard Pinout
● RoHS Compliance
H0503RN-2W
H0505RN-2W
H0509RN-2W
H0512RN-2W
H0515RN-2W
H0505LT-2W
H0509LT-2W
H0512LT-2W
H0515LT-2W
H1205RN-2W
H1209RN-2W
H1212RN-2W
H1215RN-2W
H1205LT-2W
H1209LT-2W
H1212LT-2W
H1215LT-2W
H2405RN-2W
H2409RN-2W
H2412RN-2W
H2415RN-2W
H2403LT-2W
H2405LT-2W
H2409LT-2W
H2412LT-2W
3.3
5
71
76
78
79
78
76
78
79
78
76
79
80
79
76
79
80
79
77
77
80
78
71
77
77
80
78
CE
CE
CE
CE
CE
CE
CE
CE
CE
CE
CE
CE
CE
CE
CE
CE
CE
CE
CE
CE
9
12
15
5
5
4.5-5.5
10.8-13.2
21.6-26.4
9
12
15
5
APPLICATIONS
The
H_RN-2W&H_LT-2W
series
are
9
specially designed for applications where
a
12
15
5
group of polar power supplies are isolated from
the input power supply in a distributed power
supply system on a circuit board.
12
9
These products apply to:
12
15
5
1) Where the voltage of the input power supply
is fixed (voltage variation ≤ ±10%);
2) Where isolation is necessary between input
and output (isolation voltage ≤ 6000VDC);
3) Where the regulation of the output voltage
and the output ripple noise are not
demanding.
9
12
15
3.3
5
24
Such as: purely digital circuits, ordinary low
frequency analog circuits, and IGBT power
device driving circuits.
CE
CE
CE
CE
9
12
15
H2415LT-2W
Note:
1.Models listed with strike-through text have been officially discontinued.
MODEL SELECTION
2.*CE Certificate:EN60601
COMMON SPECIFICATIONS
H0505RN-2W
Item
Test Conditions
Min.
Typ.
Max.
Unit
%
Rated Power
Package Style
Output Voltage
Input Voltage
Product Series
Storage humidity
Operating temperature
Storage temperature
Temp. rise at full load
Lead temperature
Cooling
95
85
-40
-55
125
25
°C
15
1.5mm from case for 10 seconds
300
Free air convection
Package material
Short circuit protection
MTBF
Epoxy Resin (UL94-V0)
MORNSUN Science & Technology Co.,Ltd.
Address: No. 5, Kehui St. 1, Kehui development
center, Science Ave., Guangzhou Science City,
Luogang district, Guangzhou,P.R.China.
Tel: 86-20-28203030
Continuous, automatic recovery
3500
K hours
g
Weight
3.8
ISOLATION SPECIFICATIONS
Fax:86-20-38601272
Item
Test Conditions
Min.
Typ.
Max.
Unit
VDC
MΩ
pF
Http://www.mornsun-power.com
Isolation voltage
Isolation resistance
Isolation capacitance
Tested for 1 minute and 1mA max 6000
Test at 500VDC 1000
10
The copyright and authority for the interpretation of the products are reserved by MORNSUN
Specifications subject to change without notice.
H_RN-2W & H_LT-2W C/0-2012 Page 1 of 3
OUTPUT SPECIFICATIONS
TYPICAL CHARACTERISTICS
Item
Test Conditions
Min.
0.2
Typ.
Max. Units
Output power
Line regulation
2
±1.2
15
W
For Vin change of ±1%
10% to 100% load (5V output)
10% to 100% load (9V output)
10% to 100% load (12V output)
10% to 100% load (15V output)
12.8
8.3
%
15
Load regulation
6.8
15
6.3
15
Output voltage accuracy
Temperature drift
See tolerance envelope graph
100% full load
±0.03 %/°C
Ripple & Noise*
20MHz Bandwidth
Full load, nominal input
150
50
200 mVp-p
KHz
Switching frequency
*Test ripple and noise by “parallel cable” method. See detailed operation instructions at Testing of
Power Converter. Section, application notes.
RECOMMENDED REFLOW SOLDERING PROFILE
Peak.Temp 260
C
250
10 Sec Max
220
C
200
150
100
90 Sec Max
C
(>220
)
50
0
Operating Temp.(oC)
Time (sec.)
Remark: The curve applies only to the hot air reflow soldering
APPLICATION NOTE
RECOMMENDED CIRCUIT
1) Requirement On Output Load
L
To ensure this module can operate efficiently and reliably, a minimum load is
specified for this kind of DC/DC converter in addition to a maximum load (namely full
load). During operation, make sure the specified range of input voltage is not exceeded,
the minimum output load could not be less than 10% of the full load. If the actual
output power is very small, please connect a resistor with proper resistance at the
output end in parallel to increase the load, or use our company’s products with a lower
rated output power.
L
+Vo
0V
Vin
Cout
Cin
DC
DC
GND
(Figure 1)
DC DC
+Vo
Vin
REG
2) Recommended testing and application circuit
If you want to further decrease the input/output ripple, an “LC” filtering network may be
connected to the input and output ends of the DC/DC converter, see (Figure 1).
It should also be noted that the inductance and the frequency of the “LC” filtering
network should be staggered with the DC/DC frequency to avoid mutual interference.
However, the capacitance of the output filter capacitor must be proper. If the capacitance
is too big, a startup problem might arise. For every channel of output, provided the safe
and reliable operation is ensured, the recommended capacitance of its filter capacitor
sees (Table 1).
GND
0V
+Vo
REG
Vin
DC
DC
GND
0V
(Figure 2)
EXTERNAL CAPACITOR TABLE (TABLE 1)
3) Output Voltage Regulation and Over-voltage Protection Circuit
The simplest device for output voltage regulation, over-voltage and over-current
protection is a linear voltage regulator with overheat protection that is connected to the
input or output end in series (Figure 2).
Vin
(VDC)
Cin
(µF)
Single Vout
(VDC)
Cout
(µF)
5
12
24
--
4.7
2.2
1
5
9
10
4.7
2.2
1
12
15
4) Overload Protection
--
Under normal operating conditions, the output circuit of these products has no
protection against overload. The simplest method is to connect a self-recovery fuse in
series at the input end or add a circuit breaker to the circuit.
It’s not recommended to connect any external
capacitor in the application field with less than
0.5 watt output.
5) No parallel connection or plug and play
The copyright and authority for the interpretation of the products are reserved by MORNSUN
Specifications subject to change without notice.
H_RN-2W & H_LT-2W
C/0-2012
Page 2 of 3
OUTLINE DIMENSIONS & PIN CONNECTIONS
MECHANICAL DIMENSIONS
RECOMMENDED FOOTPRINT
∅1.00±0.20
[0.039±0.008]
H_RN
-
2W Series
H_LT-2W Series
H_RN-2W Series
23.86±0.20
[0.939±0.008]
23.86[0.939]
17.78[0.700]
16
1
10
17.78[0.700]
9
8
16
10
9
16
10
9
(Top View)
(Top View)
7
8
1
7
7
8
1
2.54[0.100]
0.50±0.10
[0.020±0.004]
2.54[0.100]
17.78[0.700]
2.54[0.100]
H_LT-2W Series
17.78±0.35
[0.700±0.700]
(Front View)
16
10
9
0.50[0.020]
1.02[0.040]
(Front View)
7
8
1
17.78±0.35
[0.700±0.014]
0.10[0.004]
MAX3.34[0.135]
MAX3.34[0.131]
15.53[0.611]
1.20±0.20
[0.047±0.008]
17.78[0.700]
Note: grid 2.54*2.54mm.
A
0.91±0.20
[0.045±0.008]
(Side View)
0~5
A
TUBE OUTLINE DIMENSIONS
(Side View)
1.34
[0.053]
2.20±0.20
[0.087±0.008]
22.60[0.890]
18.10±0.40
[0.713±0.016]
MAX18.00[0.709]
FOOTPRINT DETAILS
FOOTPRINT DETAILS
Function
Pin
Function
GND
NC
Pin
1
7
1
7
GND
NC
8.40[0.331]
8
NC
NC
8
Note:
9
10
16
+Vo
0V
Vin
+Vo
0V
Vin
Unit:mm[inch]
9
10
16
General tolerances:±0.50mm[±0.020inch]
L=530mm[20.866inch] Tube Quantity:21pcs
L=220mm[8.661inch] Tube Quantity: 8pcs
Short tube inner packaging dimensions: L*W*H=255*170*80mm;
Short tube outer packaging dimensions(with six inner packaging boxes):
L*W*H=375*280*270mm;
Long tube inner packaging dimensions: L*W*H=580*200*100mm;
Long tube outer packaging dimensions(with two inner packaging boxes)：
L*W*H=600*215*220mm;
NC:No connection
Note:
Unit:mm[inch]
Pin section tolerances:±0.10mm[±0.004inch]
General tolerances:±0.25mm[±0.010inch]
Long tube outer packaging dimensions(with three inner packaging boxes)：
L*W*H=600*215*325mm.
TAPING REEL DIMENSIONS
18.42[0.725]
1.50[0.059]
2.00[0.079]
14.00[0.551]
4.00[0.157]
0.50[0.020]
44.80[1.764]
100.00[3.937]
1.70[0.067]
13.00[0.512]
21.50[0.846]
9.70[0.382]
1.50[0.059]
Note:
28.00[1.102]
2.00[0.079]
Per reel of packing quantity:200PCS
Innerpackage cartondimensions:L*W*H=365*350*105mm
Tube Quantity:400pcs
Unit:mm [inch]
General Tolerances:±0.50mm [± 0.020inch]
Outerpackagecartondimensions:L*W*H=390*360*245mm
Tube Quantity:800pcs
Note:
1.Operation under minimum load will not damage the converter; However, they may not meet all specification listed, and that will reduce the life of
product.
2.All specifications measured at Ta=25°C, humidity<75%, nominal input voltage and rated output load unless otherwise specified.
3.Only typical models listed, other models may be different, please contact our technical person for more details.
4. In this datasheet, all the test methods of indications are based on corporate standards.
The copyright and authority for the interpretation of the products are reserved by MORNSUN
Specifications subject to change without notice.
H_RN-2W & H_LT-2W C/0-2012 Page 3 of 3
相关型号：
H0505RN-2W_12
2W, FIXED INPUT,6000V ISOLATED & UNREGULATED SINGLE OUTPUT DC-DC CONVERTER
CRYSTEKMICROW
H0505S-1W
输入 输出 典型效率 输出纹波噪声 型号 输入电压 输入电压范围 输出电压 输出电流 （V） （V） （V） （MA） （%） MV P-P 5 4.5-5.5 5 200 70 75 H0505S-1W 9 111 72 75 H0509S-1W 12 84 73 75 H0512S-1W 15 67 74 75 H0515S-1W 12 10.8-13.2 5 200 70 75 H1205S-1W 9 111 71 75 H1209S-1W 12 84 72 75 H1212S-1W 15 67 74 75 H1215S-1W
MICRODC
©2020 ICPDF网 联系我们和版权申明