118JA124R5A0A1 [CTS]
Commercial 3/4inch (19.1mm) Diameter, 2-Watt, Wirewound Variable Resisters; 商业3 / 4英寸( 19.1毫米)直径, 2瓦,线绕可变串电阻型号: | 118JA124R5A0A1 |
厂家: | CTS |
描述: | Commercial 3/4inch (19.1mm) Diameter, 2-Watt, Wirewound Variable Resisters |
文件: | 总2页 (文件大小:277K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Series 118
®
Commercial 3/4"
(19.1mm) Diameter,
2-Watt, Wirewound
Variable Resisters
Features
• Fully enclosed construction
• Long rotation life
• Optional grounded or insulated rotor
construction
• Incorporated fixed resistor available
• Available with nylon shaft
• Bushing mounting style
• RoHS compliant
Electrical and Mechanical Specifications
Resistance Range
Resistance Tapers
1 ohm through 20,000 ohms (linear taper)
Standard: Linear
Resistance Tolerance
Standard: ±20%
Taps Available
None
Special: ±10%
Incorporated Fixed Resistor
Power Rating, Watts
A fixed resistor can be incorporated at the end
of CW or CCW rotation to a minimum of 15% of
the total resistance value. The rotation is
shortened by an amount proportional to the ratio
of the fixed resistor to the total resistance value.
2 watts @ 55°C derated to no load @ 105°C,
linear taper, bushing mounted control on
steel panel 4"x4" x .050"
(101.6mm x 101.6mm x 1.27mm).
Angle of Rotation
Voltage Rating
Total Rotation: 270° ± 5°
Terminals to mounting surface (insulated types only):
High pot test, one minute — 900 VAC
Operating Maximum — 500 VDC
Across end terminals:
Rotational Torque
Turning Torque: 1/2 to 10 in-oz. (36-720 gf-cm)
Stop Strength
Determined by resistance value and
wattage rating
4 in-oz. (4.61 Kgf-cm)
9/30/06
1 - 2
© 2006 CTS Corporation. All rights reserved. Information subject to change.
CTS Electronic Components
www.ctscorp.com
Electrical and Mechanical Specifications
Terminal Information
Bushing Information
Insulated Construction (Standard)
Standard: 3/8"-32 UNEF-2A thread, .375" (9.53mm)
or .250" (6.35mm) long. M9 x 0.75
available.
The contactor is insulated from the base and
connected to the center terminal on the insulated
construction. This construction can be supplied
with the center terminal and one end terminal at
either end of the resistance element or with the
center terminal and terminals at both ends of the
resistance element.
Special: As required in increments of 1/16" (1.58mm)
Locating Lugs
Standard Position: Left side (with terminals down)
supplied, unless otherwise
specified.
Grounded Construction (Optional)
The grounded construction is supplied without a
center terminal and the contactor is connected to
the case. This construction can be furnished with
one end terminal at either end of the resistance
element or with terminals at both ends of the
element.
Other Positions:
Available with right side only, both
left and right, or without lugs.
CTS SERIES TYPE 118
CLEARANCE HOLE FOR 3/8-32 THREADED BUSHING
CENTER TERMINAL SUPPLIED WITH INSULATED CONTACT ARM CONSTRUCTION.
OMITTED ON GROUNDED CONTACT ARM CONSTRUCTION.
10.41
.410
10.41
.410
1.57
.062
1.57
.062
2.08
.082
4.16±0.05
.164±.002
3.96
.156
OPTIONAL PC TERMINAL POSTION
PERPENDICULAR TO MFG. SURFACE.
45°
45°
7.14
.281
END C.C.W
ROT.
END C.W
9.4±0.05
.370±.002
1.4
.055
1.52
.060
3/8-32 UNEF-2A
2.79±0.05
.110±.002
7.95
.313
40°
40°
TERMINLS 1.98/.078
WIDE X 0.40/.016
19.84
.781
6.35
.250
6.35
.250
270°
ROT.
LOCATING LUG
11.13
.438
2.03±0.38
.080±.015
1.60
.063
11.13
.438
0.4
.016
A±
ABOVE MFG SURFACE
0.8
.031
L±
mm
DIMENSION:
INCH
Ordering Information
118 G A 3 32 R
103 B 1
TAPER
1 – LINEAR
LOCATING
LUG
SHAFT TRIM
RESIST TOLERANCE
R – ROUND
1 –LEFT
2 –RIGHT
3 –NONE
F – FLATTED
K – KNURLED
A– ±10%
B– ±20%
D– ± 5%
RESISTANCE CODE
CODE RESISTANCE
TERMINAL STYLE
SHAFT LENGTH
J – INSULATED
CONSTRUCTION
G –GROUNDED
CONSTRUCTION
5A0
500
101
501
102
252
502
103
203
5 OHMS
50
100
500
1K
2.5K
5K
10K
20K
118 SERIES ONLY
FROM MOUNTING SURFACE
1/32" INCREMENTS
20 – .625" (15.9mm)
24 – .750" (19.1mm)
28 – .875" (22.2mm)
32 – 1.000" (25.4mm)
MOUNTING STYLE BUSHING
A – 1/4" (6.35mm) LONG
B – 3/8" (9.53mm) LONG
Metric bushings available. Consult CTS.
9/30/06
2 - 2
© 2006 CTS Corporation. All rights reserved. Information subject to change.
CTS Electronic Components
www.ctscorp.com
相关型号:
©2020 ICPDF网 联系我们和版权申明