208-9LPST [CTS]
Slide Dip Switch, 9 Switches, SPST, Latched, 0.05A, 24VDC, Solder Terminal, Through Hole-straight, ROHS COMPLIANT;
| 型号： | 208-9LPST |
| 厂家： | 
CTS |
| 描述： | Slide Dip Switch, 9 Switches, SPST, Latched, 0.05A, 24VDC, Solder Terminal, Through Hole-straight, ROHS COMPLIANT 开关 |
| 文件： | 总5页 (文件大小：730K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Series 206/208
Through-Hole DIP Switch
. Available with SPST, SPDT, DPST, 3PST circuitry choices
. Available with low profile, standard, or extended actuator heights.
Consult the ordering information for options.
. RoHS compliant
. Optional top tape seal for board spray washing
Description
The terminals are molded into the thermoset base and provide an electrostatic discharge shield rating to 22KV
when the OFF side terminals are connected to ground. The optimized contact design incorporating a dimple-to-
flat surface wiping interface provides long-term contact corrosion resistance making this the ideal choice for any
HVAC, server, or security system.
Ordering Information
Number of Number of
Number of
Switch Positions
Actuator
Height
Bottom
Epoxy Seal
Top Tape
Seal
Actuation
Preset
Series
Poles
Throws
206-/208 -
1
2
1
E
S
T
N
Code No. of poles
No. of switch
positions
1 position
Code
BLANK
Spec.
Ship at OFF position
Ship at ON position
(SPST, DPST & 3PST
only)
Code
Code
Blank
Spec.
Blank
For SPST
Standard (0.89mm/.035”)
Extended (3.43mm/.135”)
(SPST only)
Low profile (Flush)
(SPST & SPDT only)
1
2
3
Single pole
Double pole
3 poles
1
2
3
4
5
6
7
8
9
2 positions
3 positions
4 positions
5 positions
6 positions
7 positions
8 positions
9 positions
10 positions
12 positions
N
E
LP
Code
Blank
Spec.
For SPST
Code
Blank
Top tape seal
No top tape seal
Top tape seal
(Not available for
extended actuator
or 1-position SPST
DIP switch)
1
2
Single throw
Double throw
10
12
Code Bottom epoxy seal
Blank
No epoxy seal
Epoxy seal
T
S
(Required for 206-1S)
Notes: 1.Contact CTS for other common features not listed.
2. Alternate numbering format 20600/20800… instead of 206-/208-
Example: 206008ST
2017-08-17 Rev. C
Page 1 of 5
© 2017 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test
equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.
Series 206/208
Through-Hole DIP Switch
Electrical Specifications
Parameter
Conditions & Remarks
Initial
Min
Max
Unit
50
Contact Resistance (206)
milliohms
At end of life
Initial
100
100
500
Contact Resistance (208)
milliohms
Megohms
minute
At end of life
Insulation Resistance
Dielectric Strength
Between insulated terminals
500 VAC between
adjacent switches
Between adjacent
closed switches
1000
1
Switch Capacitance
Nonswitching Rating
5.0
pF
100
or
50
mA
or
VDC
SPST
SPDT
DPST
3PST
1
1
1
1
12
6
Position
Position
Position
Position
Circuit
6
4
Mechanical and Environmental
Actuation Life (206)
Actuation Life (208)
Soldering
10,000 cycles switching 50mA @ 24VDC
2,000 cycles switching 50mA @ 24VDC
Maximum wave temperature, 260°C for 5 seconds
Per MIL-STD-202F, method 213B, condition A(50G’s)
with no contact inconsistencies greater than 1 microsecond
Per MIL-STD-202F, method 204D, condition B (.06” or 15G’s between 10 HZ to 2K HZ) with
no contact inconsistencies greater than 1 microsecond
Bottom epoxy seal optional
Optional top tape seal for board spray washing
Special side or top marking available-consult CTS
Standard anti-static tube packaging
Shock
Vibration
Seal
Marking
Packaging:
Operating Temperature
Range
-55°C to +85°C
Storage Temperature
Range
-55°C to +85°C
2017-08-17 Rev. C
Page 2 of 5
© 2017 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test
equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.
Series 206/208
Through-Hole DIP Switch
Mechanical Specifications
Figure 1 - SPST
Figure 2 – SPDT
Figure 3 – DPST
2017-08-17 Rev. C
Page 3 of 5
© 2017 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test
equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.
Series 206/208
Through-Hole DIP Switch
Figure 4 - 3PST
Figure 5 – Low Profile Actuators (SPST & SPDT only)
Figure 6 – Extended Actuators (SPST only)
2017-08-17 Rev. C
Page 4 of 5
© 2017 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test
equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.
Series 206/208
Through-Hole DIP Switch
2017-08-17 Rev. C
Page 5 of 5
© 2017 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test
equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.
相关型号：
208-9RA
Slide Dip Switch, 9 Switches, SPST, Latched, 0.05A, 24VDC, Solder Terminal, Through Hole-right Angle, ROHS COMPLIANT
CTS
208.25%FA10A20PPM-CARDPACK
Fixed Resistor, Wire Wound, 10W, 208ohm, 632V, 0.25% +/-Tol, -20,20ppm/Cel,
VISHAY
208.25%FA10A20PPM-TANDR
Fixed Resistor, Wire Wound, 10W, 208ohm, 632V, 0.25% +/-Tol, -20,20ppm/Cel,
VISHAY
208.25%FA1A20PPM-TANDR
Fixed Resistor, Wire Wound, 1W, 208ohm, 44V, 0.25% +/-Tol, -20,20ppm/Cel,
VISHAY
208.25%FA7A20PPM-AMMOPACK
Fixed Resistor, Wire Wound, 7W, 208ohm, 490V, 0.25% +/-Tol, -20,20ppm/Cel,
VISHAY
208.5%FA10A20PPM-TANDR
Fixed Resistor, Wire Wound, 10W, 208ohm, 632V, 0.5% +/-Tol, -20,20ppm/Cel,
VISHAY
©2020 ICPDF网 联系我们和版权申明