228BDVARBFLMSB [CTS]
Keypad Switch,;型号: | 228BDVARBFLMSB |
厂家: | CTS |
描述: | Keypad Switch, |
文件: | 总7页 (文件大小:1470K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Series 228B
6.0 x 6.0mm Illuminated Tactile Switch
. Surface mount gull-wing terminal and standard through hole configurations
. Compatible with IR reflow, and manual soldering
. Single color display during illumination
. Variety of LED color options
. Variety of cap shape, color, laser etching options
Ordering Information
Terminal Actuating Actuation LED
LED
Cap
Cap
Laser
Series
Packaging
R
Type
Direction
Force
Color
Type
Style
Color
Etching
228B
M
V
A
R
F
AF
MS
A
Blank – No Cap
See table on
page 2
Code
D
Spec.
Blank – No Cap
See table on
pages 2 - 4
Standard through hole
(white actuator)
Blank – No Etching
(only available on
Natural color caps)
Surface mount gull wing
(black actuator)
M
Code
F
Spec.
Flat
Bulb
See table on page.2
Code
V
Spec.
*Blank
Vertical
*Blank is only available
for no cap, through hole
terminal and single color
LED
Code
Spec.
Tape & reel
packaging
(only available for
surface mount type)
Tray packaging
(only available for
standard through
hole type)
Code Spec.
A
160 gf
R
Code
R
Spec.
Red
Blank
Y
Yellow
G
Pure Green
Blue
B
Note: Not all part
Note: Caps supplied in bulk for
surface mount terminal
constructions and must be
installed after IR reflow
W
A
White
Amber
number combinations
are available. Please
review the notes on the
following pages.
RG
RB
YG
RA
Red & Green
Red & Blue
Yellow & Green
Red & Amber
AW Amber & White
www.ctscorp.com
2019-6-10 Rev. D
Page 1 of 7
© 2019 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test
equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.
Series 228B
Tactile Switch
Cap Style
Cap Color
Code Cap Color
Code Cap Color
MS Misty Silver
Code
Spec.
B
V
G
Black
Ivory
Gray
*AF Square (10 x 10)
*BF Square (12.5 x 12.5)
*CF Round (Dia. 10)
*DF Dome (Dia. 10)
*EF Button (Dia. 14)
W
White
BB Bright Black
Red
Only available for cap style
of AF, BF, CF, F
R
MB Misty Black
A
Orange
Natural
N
*F
Square with center dot (7.5 x 7.5)
Elliptical column
G
(only available with arrow laser etching)
Bullet
Hollow Cylinder, height 8.2mm
H
J1
Cap Etching
Code
A
J2
K
Cylinder, height 10.3mm
Joystick button
Style
L
Square (7.5 x 7.5)
Round (Dia.10)
M
B
C
1) AF, BF, CF, DF, EF are only available for through hole
terminals
2) AF, BF, CF, F – etching not available for these cap
styles. Cap supplied with a transparent center dot
D
E
POWER
Cap Style Details
Style AF: Square in with Center Dot (10 x 10)
Style CF: Round with Center Dot (Dia. 10mm)
Ex. of Black
Frame with Gray
Cap
Ex. of Ivory
Frame with
Ivory Cap
Style BF: Square with Center Dot (12.5 x 12.5)
Style DF: Dome (Dia. 10mm)
Ex. of Black
Frame with Ivory
Cap
Ex. of Black
Frame with
Ivory Cap
www.ctscorp.com
2019-6-10 Rev. D
Page 2 of 7
© 2019 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test
equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.
Series 228B
Tactile Switch
Style J1: Hollow Cylinder, 8.2mm height
Style EF: Button with Frame (Dia. 14)
Only available with POWER etching
Ex. of Orange Cap
Ex. of Silver
Frame with
Red Cap
Style F: Square with Center Dot (7.5 x 7.5)
Style J2: Cylinder, 10.3mm height
Ex. of Misty
Silver Cap
Ex. of Ivory Cap
Style G: Elliptical column
Style K: Joystick button
(Only available with natural color and no etching)
(Only available with natural color and no etching)
Ex. of
Ex. of
Natural Cap
Natural Cap
Style H: Bullet
Style L: Square (7.5x7.5)
(Only available with natural color and no etching)
Ex. of
Natural Cap
Ex. of Misty
Silver Cap
www.ctscorp.com
2019-6-10 Rev. D
Page 3 of 7
© 2019 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test
equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.
Series 228B
Tactile Switch
Style M: Round (Dia.10)
Ex. of Misty
Silver Cap
Electrical Specifications
Parameter
Conditions & Remarks
Min
Max
100
Unit
milliohms
Contact Resistance
Between insulated
terminals
1 minute between
adjacent switches
Insulation Resistance
Dielectric Strength
Nonswitching Rating
100
megohms
250
VAC
50
or
12
mA
or
VDC
Mechanical and Environmental
Maximum reflow temperature, 260°C for 5 seconds
Maximum manual temperature, 350°C for 3 seconds
Soldering
RoHS
Lead-Free. Fully compliant to RoHS Directive 2011/65/EU and 2015/863/EU
160gf
Operating Force
Actuation Life
Actuator Strength
Travel
100,000 cycles
2 Kgf maximum
0.25 ±0.1mm
Standard tape and reel packaging for surface mount gull wing terminal
Tray packaging for standard though hole
Packaging
Operating Temperature
Range
Storage Temperature
Range
-20°C to +70°C
-30°C to +80°C
www.ctscorp.com
2019-6-10 Rev. D
Page 4 of 7
© 2019 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test
equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.
Series 228B
Tactile Switch
Mechanical Specifications
Figure 1 – 228BDV, Standard Though Hole, Vertical Actuation
Figure 2 – 228BMV, Surface Mount Gull Wing, Vertical Actuation
www.ctscorp.com
2019-6-10 Rev. D
Page 5 of 7
© 2019 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test
equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.
Series 228B
Tactile Switch
Figure 3 – 228BDVA…HN, Standard Though Hole, Vertical Actuation, Bullet
on Square, Natural Color Cap
Figure 4 – 228BDVA…KN, Standard Though Hole, Vertical Actuation, Joystick
Button on Square, Natural Color Cap
www.ctscorp.com
2019-6-10 Rev. D
Page 6 of 7
© 2019 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test
equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.
Series 228B
Tactile Switch
Packing: Tape and Reel
Surface Mount Gull Wing, Actuator Height 9.0mm
The packing specifications:
1. Structure and materials:
No PART NAME
MATERIAL
①
②
③
REEL
POLYSTYRENE
POLYSTYRENE
POLYESTER
CARRIER TAPE
COVER TAPE
2. Packing quantity: 350 pcs/reel
3. More than 15 empty pockets should remain at each end of the carrier tape for each reel.
4. Shortage of less than 10 pcs a reel is acceptable but no more than 3 consecutive empty
pockets are allowed.
5. Stripping strength of cover tape is between 10 gf to 130 gf and stripping angle should be
within 165°~180°.
6. The product in the pocket of carrier tape should be placed in a specified correct position.
7. Tape and reel per EIA-481.
8. Dimensions:
www.ctscorp.com
2019-6-10 Rev. D
Page 7 of 7
© 2019 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test
equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.
相关型号:
©2020 ICPDF网 联系我们和版权申明