626P1004I3T [CTS]
LVPECL Output Clock Oscillator, 10MHz Nom,;型号: | 626P1004I3T |
厂家: | CTS |
描述: | LVPECL Output Clock Oscillator, 10MHz Nom, |
文件: | 总10页 (文件大小:813K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Model 626
Very Low Jitter LVPECL or LVDS Clock
Features
. Ceramic Surface Mount Package
. Very Low Phase Jitter Performance, 500fs Maximum
. Fundamental or 3rd Overtone Crystal Design
. Frequency Range 6 – 220MHz *
. +2.5V or +3.3V Operation [+1.8V LVDS only]
. Output Enable Standard
Part Dimensions:
2.5 × 2.0 × 1.1mm • 14.25852mg
. Tape and Reel Packaging, EIA-418
Standard Frequencies
- 25.00MHz
- 27.00MHz
- 50.00MHz
- 74.1758MHz
- 74.25MHz
- 100.00MHz
- 125.00MHz
- 155.52MHz
- 156.25MHz
- 161.1328MHz
Applications
. SerDes
. PON
. Storage Area Networking
. Broadband Access
. SONET/SDH/DWDM
. Ethernet/GbE/SyncE
. Fiber Channel
. Test and Measurement
* See Page 9 for additional developed frequencies.
Check with factory for availability of frequencies not listed.
Description
CTS Model 626 is a low cost, high performance clock oscillator supporting differential LVPECL or LVDS outputs.
Employing the latest IC technology, M626 has excellent stability and very low jitter/phase noise performance.
Ordering Information
Model
Output
Type
P
Frequency
Stability
4
Temperature
Supply
Voltage
3
Frequency Code
[MHz]
Packaging
T
Range
I
626
XXX or XXXX
Output
LVPECL - Pin 1 Enable
LVDS - Pin 1 Enable
Stability
Voltage
Code
P
L
Code
Code
M
2
±20ppm 2
±25ppm
±30ppm
±50ppm
±100ppm
+1.8Vdc 4
+2.5Vdc
+3.3Vdc
6
5
4
3
2
3
Frequency
Product Frequency Code 1
Temp. Range
-20°C to +70°C
-40°C to +85°C
-40°C to +105°C 3
Packing
1k pcs./reel
Code
Code
C
I
Code
T
G
Notes:
1] Refer to document 016-1454-0, Frequency Code Tables. 3-digits for frequencies <100MHz, 4-digits for frequencies 100MHz or greater.
Check factory for availability. Temperature code C only.
Check factory for availability. Stability codes 2 and 3 only.
LVDS output only. Consult factory for availability.
2]
3]
4]
Not all performance combinations and frequencies may be available.
Contact your local CTS Representative or CTS Customer Service for availability.
This product is specified for use only in standard commercial applications. Supplier disclaims all express and implied warranties and liability in connection with any use of this
product in any non-commercial applications or in any application that may expose the product to conditions that are outside of the tolerances provided in its specification.
DOC# 008-0586-0 Rev. B
Page 1 of 10
©2017 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test
equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.
Model 626
Very Low Jitter LVPECL or LVDS Clock
Electrical Specifications
Operating Conditions
PARAMETER
SYMBOL
CONDITIONS
-
MIN
-0.3
TYP
-
MAX
4.0
UNIT
V
Maximum Supply Voltage
VCC
1.710
2.375
3.135
1.8
2.5
3.3
1.890
2.625
3.465
Supply Voltage
[Note 1]
VCC
±5%
V
Supply Current
LVPECL
-
45
30
7
70
40
ICC
VCC = +3.3V or +2.5V @ maximum load
VCC = +1.8V @ maximum load
mA
LVDS
-
LVDS
-
20
-20
-40
-40
-50
+70
+85
+105
+125
Operating Temperature
Storage Temperature
TA
-
-
+25
-
°C
°C
TSTG
Frequency Stability
PARAMETER
Frequency Range
LVPECL
SYMBOL
fO
CONDITIONS
-
MIN
TYP
MAX
UNIT
MHz
6 - 220
6 - 220
LVDS
Frequency Stability
Δf/fO
-
20, 25, 30, 50 or 100
- 5
±ppm
ppm
[Note 2]
Aging
Δf/f25
First Year @ +25°C, nominal VCC
-5
1.] LVDS output only for +1.8V option.
2.] Inclusive of initial tolerance at time of shipment, changes in supply voltage, load, temperature and 1st year aging.
Output Parameters
PARAMETER
Output Type
Output Load
SYMBOL
-
CONDITIONS
MIN
TYP
MAX
-
UNIT
-
LVPECL
-
RL
Terminated to VCC - 2.0V
-
50
Ohms
VOH
VCC - 1.025
VCC - 1.810
VCC - 1.085
VCC - 1.830
45
-
VCC - 0.880
VCC - 1.620
VCC - 0.880
VCC - 1.555
55
PECL Load, -20°C to +70°C
PECL Load, -40°C to +85°C
V
V
VOL
-
-
Output Voltage Levels
VOH
VOL
-
Output Duty Cycle
Rise and Fall Time
SYM
TR, TF
@ VCC - 1.3V
-
%
@ 20%/80% Levels, RL = 50 Ohms
-
0.3
0.7
ns
LVDS
100
1.43
1.10
-
Output Type
Output Load
-
-
-
RL
Between Outputs
-
-
-
1.60
-
Ohms
VOH
VOL
Output Voltage Levels
LVDS Load
V
0.90
45
Output Duty Cycle
Differential Output Voltage
Offset Voltage
SYM
VOD
VOS
TR, TF
@ 1.25V
RL = 100 Ohms
55
%
mV
V
247
1.125
-
330
1.25
0.4
454
1.375
0.7
LVDS Load
Rise and Fall Time
@ 20%/80% Levels, RL = 100 Ohms
ns
DOC# 008-0586-0 Rev. B
Page 2 of 10
©2017 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test
equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.
Model 626
Very Low Jitter LVPECL or LVDS Clock
Electrical Specifications
Output Parameters
PARAMETER
SYMBOL
CONDITIONS
MIN
-
TYP
3
MAX
10
UNIT
ms
Start Up Time
TS
Application of VCC
Enable Function [Standby]
Enable Input Voltage
Disable Input Voltage
Disable Time
VIH
VIL
Pin 1 Logic '1', Output Enabled
Pin 1 Logic '0', Output Disabled
0.7VCC
-
-
0.3VCC
200
15
V
V
-
-
-
-
-
-
-
TPLZ
IST
Pin 1 Logic '0', Output Disabled
-
ns
µA
ms
fs
Standby Current
Enable Time
Pin 1 Logic '0', Output Disabled
-
TPLZ
Pin 1 Logic '1', Output Enabled
-
300
-
4
40MHz - 220MHz, Bandwidth 12kHz to 20MHz
6MHz - 39.999MHz, Bandwidth 12kHz to 5MHz
500
<1
Phase Jitter, RMS
tjrms
ps
Enable Truth Table
Pin 1
Logic ‘1’
Open
Pin 4 & Pin 5
Output
Output
Logic ‘0’
High Imp.
Test Circuit
LVPECL
LVDS
Output Waveform
LVPECL or LVDS
DOC# 008-0586-0 Rev. B
Page 3 of 10
©2017 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test
equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.
Model 626
Very Low Jitter LVPECL or LVDS Clock
Electrical Specifications
Performance Data
Phase Noise [typical]
100MHz, LVDS, VCC = +2.5V, TA = +25°C
125MHz, LVDS, VCC = +3.3V, TA = +25°C
125MHz, LVDS, VCC = +2.5V, TA = +25°C
133MHz, LVDS, VCC = +3.3V, TA = +25°C
133MHz, LVDS, VCC = +2.5V, TA = +25°C
156.25MHz, LVDS, VCC = +3.3V, TA = +25°C
DOC# 008-0586-0 Rev. B
Page 4 of 10
©2017 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test
equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.
Model 626
Very Low Jitter LVPECL or LVDS Clock
Electrical Specifications
Performance Data
Phase Noise [typical]
150MHz, LVPECL, VCC = +2.5V, TA = +25°C
150MHz, LVPECL, VCC = +3.3V, TA = +25°C
155.52MHz, LVPECL, VCC = +2.5V, TA = +25°C
155.52MHz, LVPECL, VCC = +3.3V, TA = +25°C
156.25MHz, LVPECL, VCC = +2.5V, TA = +25°C
156.25MHz, LVPECL, VCC = +3.3V, TA = +25°C
DOC# 008-0586-0 Rev. B
Page 5 of 10
©2017 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test
equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.
Model 626
Very Low Jitter LVPECL or LVDS Clock
Electrical Specifications
Phase Noise Tabulated - LVDS
Typical, VCC = +2.5V, TA = +25°C
Typical, VCC = +3.3V, TA = +25°C
PARAMETER
SYMBOL
CONDITIONS
TYP
UNIT
PARAMETER
SYMBOL
CONDITIONS
TYP
UNIT
LVDS @ 100.00MHz
Phase Noise
LVDS @ 125.00MHz
Phase Noise
Single Side Band
Single Side Band
@ 10Hz
-84.20
-114.15
-131.57
-145.73
-145.76
-147.14
-147.92
@ 10Hz
-78.38
-110.33
-130.56
-143.21
-146.13
-148.44
-149.28
@ 100Hz
@ 1kHz
@ 100Hz
@ 1kHz
-
dBc/Hz
-
dBc/Hz
@ 10kHz
@ 100kHz
@ 1MHz
@ 10MHz
@ 10kHz
@ 100kHz
@ 1MHz
@ 10MHz
Phase Jitter, RMS
tjrms
Integration Bandwidth 12kHz - 20MHz 385.00
fs
Phase Jitter, RMS
tjrms
Integration Bandwidth 12kHz - 20MHz 270.79
fs
PARAMETER
SYMBOL
CONDITIONS
TYP
UNIT
PARAMETER
SYMBOL
CONDITIONS
TYP
UNIT
LVDS @ 125.00MHz
Phase Noise
LVDS @ 133.00MHz
Phase Noise
Single Side Band
Single Side Band
@ 10Hz
-78.89
-111.00
-129.90
-144.21
-145.41
-147.49
-148.50
@ 10Hz
-78.84
-108.34
-130.40
-146.53
-146.23
-148.89
-149.68
@ 100Hz
@ 1kHz
@ 100Hz
@ 1kHz
-
dBc/Hz
-
dBc/Hz
@ 10kHz
@ 100kHz
@ 1MHz
@ 10MHz
@ 10kHz
@ 100kHz
@ 1MHz
@ 10MHz
Phase Jitter, RMS
tjrms
Integration Bandwidth 12kHz - 20MHz 285.73
fs
Phase Jitter, RMS
tjrms
Integration Bandwidth 12kHz - 20MHz 245.65
fs
PARAMETER
SYMBOL
CONDITIONS
TYP
UNIT
PARAMETER
SYMBOL
CONDITIONS
TYP
UNIT
LVDS @ 133.00MHz
Phase Noise
LVDS @ 156.25MHz
Phase Noise
Single Side Band
Single Side Band
@ 10Hz
-81.21
-109.47
-129.95
-146.50
-145.86
-147.50
-148.92
@ 10Hz
-78.30
-106.47
-129.58
-140.35
-147.41
-150.11
-151.37
@ 100Hz
@ 1kHz
@ 100Hz
@ 1kHz
-
dBc/Hz
-
dBc/Hz
@ 10kHz
@ 100kHz
@ 1MHz
@ 10MHz
@ 10kHz
@ 100kHz
@ 1MHz
@ 10MHz
Phase Jitter, RMS
tjrms
Integration Bandwidth 12kHz - 20MHz 254.87
fs
Phase Jitter, RMS
tjrms
Integration Bandwidth 12kHz - 20MHz 169.71
fs
DOC# 008-0586-0 Rev. B
Page 6 of 10
©2017 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test
equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.
Model 626
Very Low Jitter LVPECL or LVDS Clock
Electrical Specifications
Phase Noise Tabulated - LVPECL
Typical, VCC = +2.5V, TA = +25°C
Typical, VCC = +3.3V, TA = +25°C
PARAMETER
SYMBOL
CONDITIONS
TYP
UNIT
PARAMETER
SYMBOL
CONDITIONS
TYP
UNIT
LVPECL @ 150.00MHz
Phase Noise
LVPECL @ 150.00MHz
Phase Noise
Single Side Band
Single Side Band
@ 10Hz
-74.74
-103.86
-126.34
-137.18
-142.50
-144.07
-145.87
@ 10Hz
-75.47
-106.54
-132.10
-143.62
-152.08
-154.14
-155.81
@ 100Hz
@ 1kHz
@ 100Hz
@ 1kHz
-
dBc/Hz
-
dBc/Hz
@ 10kHz
@ 100kHz
@ 1MHz
@ 10MHz
@ 10kHz
@ 100kHz
@ 1MHz
@ 10MHz
Phase Jitter, RMS
tjrms
Integration Bandwidth 12kHz - 20MHz 316.93
fs
Phase Jitter, RMS
tjrms
Integration Bandwidth 12kHz - 20MHz 383.70
fs
PARAMETER
SYMBOL
CONDITIONS
TYP
UNIT
PARAMETER
SYMBOL
CONDITIONS
TYP
UNIT
LVPECL @ 155.52MHz
Phase Noise
LVPECL @ 155.52MHz
Phase Noise
Single Side Band
Single Side Band
@ 10Hz
-76.15
-105.64
-128.82
-134.29
-144.64
-144.53
-148.76
@ 10Hz
-74.20
-106.07
-133.92
-140.06
-152.01
-154.13
-156.10
@ 100Hz
@ 1kHz
@ 100Hz
@ 1kHz
-
dBc/Hz
-
dBc/Hz
@ 10kHz
@ 100kHz
@ 1MHz
@ 10MHz
@ 10kHz
@ 100kHz
@ 1MHz
@ 10MHz
Phase Jitter, RMS
tjrms
Integration Bandwidth 12kHz - 20MHz 261.56
fs
Phase Jitter, RMS
tjrms
Integration Bandwidth 12kHz - 20MHz 100.50
fs
PARAMETER
SYMBOL
CONDITIONS
TYP
UNIT
PARAMETER
SYMBOL
CONDITIONS
TYP
UNIT
LVPECL @ 156.25MHz
Phase Noise
LVPECL @ 156.25MHz
Phase Noise
Single Side Band
Single Side Band
@ 10Hz
-76.48
-106.76
-128.97
-133.21
-143.87
-143.57
-147.95
@ 10Hz
-78.01
-107.38
-133.00
-142.25
-152.23
-154.66
-157.00
@ 100Hz
@ 1kHz
@ 100Hz
@ 1kHz
-
dBc/Hz
-
dBc/Hz
@ 10kHz
@ 100kHz
@ 1MHz
@ 10MHz
@ 10kHz
@ 100kHz
@ 1MHz
@ 10MHz
Phase Jitter, RMS
tjrms
Integration Bandwidth 12kHz - 20MHz 302.33
fs
Phase Jitter, RMS
tjrms
Integration Bandwidth 12kHz - 20MHz 91.26
fs
DOC# 008-0586-0 Rev. B
Page 7 of 10
©2017 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test
equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.
Model 626
Very Low Jitter LVPECL or LVDS Clock
Mechanical Specifications
Package Drawing
Marking Information
1. O – Output Type; P or E = LVPECL, L or V = LVDS.
2. ST – Frequency Stability/Temperature Code.
[Refer to Ordering Information]
3. V – Voltage Code; 3 = 3.3V, 2 = 2.5V.
4. xxxx – Frequency Code.
626OSTV
● xxxxD
3-digits, frequencies below 100MHz
4-digits, frequencies 100MHz or greater
[See document 016-1454-0, Frequency Code Tables.]
5. D – Date Code. See Table I for codes.
[Note: Manufacturing site code must appear on reel
and carton labels.]
Recommended Pad Layout
Pin Assignments
Notes
Pin
Symbol
Function
Enable
1. JEDEC termination code (e4). Barrier-plating is
nickel [Ni] with gold [Au] flash plate.
2. Reflow conditions per JEDEC J-STD-020; +260°C
maximum, 20 seconds.
1
EOH
2
N.C.
No Connect
3
GND
Circuit & Package Ground
RF Output
3. MSL = 1.
4
Output
Output
VCC
5
Complimentary RF Output
Supply Voltage
6
Table I - Date Code
MONTH
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
DEC
YEAR
2001 2005 2009 2013 2017
2002 2006 2010 2014 2018
2003 2007 2011 2015 2019
2004 2008 2012 2016 2020
A
N
a
B
P
b
p
C
Q
c
D
R
d
r
E
S
e
s
F
T
f
G
U
g
H
V
h
v
J
W
j
K
X
k
x
L
Y
l
M
Z
m
z
n
q
t
u
w
y
DOC# 008-0586-0 Rev. B
Page 8 of 10
©2017 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test
equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.
Model 626
Very Low Jitter LVPECL or LVDS Clock
Packaging - Tape and Reel
Tape Drawing
Reel Drawing
Notes
1. Device quantity is 1k pieces minimum or 3k pieces maximum per 180mm reel.
2. Complete CTS part number, frequency value and date code information must appear on reel and carton labels.
DOC# 008-0586-0 Rev. B
Page 9 of 10
©2017 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test
equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.
Model 626
Very Low Jitter LVPECL or LVDS Clock
Addendum
Additional Developed Frequencies – MHz
FREQUENCY
FREQUENCY
CODE
FREQUENCY
FREQUENCY
CODE
FREQUENCY
FREQUENCY
FREQUENCY
FREQUENCY
CODE
CODE
10.000000
19.440000
40.000000
44.736000
77.760000
133.000000
150.000000
156.253900
156.257812
156.258750
100
156.269530
156G
194
400
447
777
1330
1500
156E
156H
156J
Frequency Codes for Cover Page Table – MHz
FREQUENCY
CODE
FREQUENCY
FREQUENCY
CODE
FREQUENCY
CODE
FREQUENCY
FREQUENCY
FREQUENCY
FREQUENCY
CODE
25.000000
27.000000
50.000000
74.175800
74.250000
250
270
500
74A
742
100.000000
125.000000
155.520000
156.250000
161.132800
1000
1250
1555
1562
1611
DOC# 008-0586-0 Rev. B
Page 10 of 10
©2017 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test
equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.
相关型号:
©2020 ICPDF网 联系我们和版权申明