BDN16-3CB/A01 [CTS]
ADHESIVE PEEL AND STICK HEAT SINKS; 胶粘剂的剥离,并坚持散热器型号: | BDN16-3CB/A01 |
厂家: | CTS |
描述: | ADHESIVE PEEL AND STICK HEAT SINKS |
文件: | 总24页 (文件大小:10411K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
THERMAL
MANAGEMENT
PRODUCTS CATALOG
®
CTS
ELECTRONIC COMPONENTS
CTS Electronic Components - California
CTS
®
TABLE OF CONTENTS
PAGE
2
CORPORATE PROFILE
ADHESIVE PEEL AND STICK HEAT SINKS
FORGED HEAT SINKS WITH PLATE FINS
FORGED HEAT SINKS WITH PIN FINS
3
4
6
FORGED COPPER HEAT SINKS WITH PIN FINS
7
CLIP AND TAPE STYLES
8
STANDARD AND CUSTOM EXTRUSIONS
9
ADDITIONAL EXTRUDED PRODUCTS FOR TO-126, TO-202, TO-218 AND TO-220 TRANSISTORS
STANDARD ZIF CIRCUIT BOARD RETAINERS
10
11
14
16
18
19
20
22
23
ZIF III CIRCUIT BOARD RETAINERS
MACHINED ZIF ENCLOSURES
HEAT FRAMES, THERMAL LINKS AND FAN TOPS
THERMAL LINKS FOR TO-5, TO-8 AND TO-18 TRANSISTORS
HEAT SINKS FOR METAL AND PLASTIC CASE, CASE-MOUNTED SEMICONDUCTORS
BOARD-MOUNTED AND VERTICALLY MOUNTED HEAT SINKS WITH BOARD-MOUNTED TABS
BOARD AND VERTICALLY MOUNTED HEAT SINKS
CORPORATE PROFILE
CTS Electronic Components is a division within CTS systems to accommodate each customer's unique design
Corporation (NYSE: CTS), a leading designer and and lead-time requirements.
manufacturer of electronic components and a provider
of electronics manufacturing services to OEMs in the assistance during the design stage, quick prototype
automotive, computer, and telecommunications markets. turnaround and dedicated manufacturing throughout the
CTS adds value to its customers through technical
In 1997, CTS acquired Dynamics Corporation of America, application lifecycle. CTS thermal management products
the parent corporation of the former International are sold and supported through the CTS global network
Electronic Research Corporation (IERC). Since then, CTS of manufacturer representatives, distributors and R&D
has continued to develop, manufacture and market a quality facilities. We are pleased to offer new products to the
line of standard and custom thermal management products marketplace and welcome the opportunity to serve you.
and rugged circuit board retainers for the electronics and Please visit us at www.ctscorp.com and then click on
military industries.
Components - Heat Sinks/Thermal Management Solutions
Through the years, CTS has fine-tuned its business and Circuit Board Retainers and Card Cages.
2
CTS
®
ADHESIVE PEEL AND STICK HEAT SINKS
W±0.01
With pre-applied adhesive, just peel
off the release liner and press onto the
component
•
•
Reduces assembly costs; no more
L±0.01
messy adhesives or greases required
• Excellent mechanical bond
•
P±0.01
Thermally optimized pin fin
G±0.01
• Omnidirectional
Adhesive shear strength at 100°C is
•
H±0.015
(a one inch square heat sink would
36psi
require a 36lb. force to remove heat sink)
T±0.01
Applicable for BGA, PGA, PLCC,
and QFP packages
•
HEAT SINK SPECIFICATIONS
THERMAL RESISTANCE
CASE TO AMBIENT* °C/WATTS
SIZE
(L)
PIN FIN CONFIGURATION
FIN
FORCED
HEAT SINK
PART NUMBER***
NATURAL
CONVECTION
(W)
(H)
T
P
G
MATRIX CONVECTION** @ 400 LFPM
BDN09-3CB/A01
BDN09-6CB/A01
BDN10-3CB/A01
BDN10-5CB/A01
BDN11-3CB/A01
BDN11-6CB/A01
BDN12-3CB/A01
BDN12-5CB/A01
BDN13-3CB/A01
BDN13-5CB/A01
BDN14-3CB/A01
BDN14-6CB/A01
BDN15-3CB/A01
BDN15-5CB/A01
BDN16-3CB/A01
BDN16-6CB/A01
BDN17-3CB/A01
BDN17-5CB/A01
BDN18-3CB/A01
BDN18-6CB/A01
BDN19-3CB/A01
BDN19-5CB/A01
BDN20-3CB/A01
BDN20-5CB/A01
BDN21-3CB/A01
BDN21-6CB/A01
.355 .09
.605 .10
.355 .09
.555 .10
.355 .09
.605 .10
.355 .09
.555 .10
.355 .09
.555 .10
.355 .09
.605 .10
.355 .09
.555 .10
.355 .09
.605 .10
.355 .09
.555 .10
.355 .09
.605 .10
.355 .09
.555 .10
.355 .09
.555 .10
.355 .09
.605 .10
.069
.132
.083
.111
.076
.119
.060
.105
.074
.125
.067
.128
.062
.118
.072
.119
.065
.114
.072
.128
.069
.111
.066
.122
.064
.120
.072
.128
.072
.114
.072
.128
.081
.114
.081
.114
.081
.128
.081
.114
.081
.128
.072
.114
.072
.114
.072
.114
.072
.114
.072
.128
7x7
4x4
26.9
24.5
26.4
20.8
20.9
18.5
19.6
16.5
16.1
14.9
16.2
13.1
15.1
11.9
13.5
10.6
11.5
9.5
9.6
7.7
8.0
6.3
7.2
5.7
6.8
5.2
6.0
4.7
5.6
4.2
4.5
3.8
4.5
3.5
3.8
3.2
3.5
2.8
2.9
2.7
2.8
2.5
2.6
2.2
0.91
0.91
1.01
7x7
1.01
1.11
1.21
1.31
1.41
1.51
1.61
1.71
1.81
1.91
2.01
2.11
5x5
8x8
1.11
1.21
1.31
1.41
1.51
1.61
1.71
1.81
1.91
2.01
2.11
5x5
9x9
6x6
9x9
6x6
10x10
6x6
11x11
7x7
11x11
7x7
13x13
8x8
13x13
8x8
14x14
9x9
15x15
9x9
16x16
9x9
NOTES:
*
Thermal resistance
of adhesive tape is
included.
**
Thermal resistance
values based on
power density of
3 watts/in.2
10.8
8.1
9.9
***Part numbers
listed for standard
black anodized
heat sinks with
CTS adhesive
tapes.
7.8
9.1
7.2
8.5
6.5
All dimensions are in inches.
3
CTS
®
FORGED HEAT SINKS WITH PLATE FINS
DESIGN FEATURES
• Precision forging technology for high power applications
• Designed for BGA and other surface mount packages
• Various mounting methods available
• Select from multiple fin heights
Width
Length
PRODUCT BENEFITS
• No special tools needed for assembly
• No additional holes required on the PCB
• Special clip easily snaps on and self-aligns
Height
SERIES APF LOW-PROFILE FORGED HEAT SINKS
Fin Matrix
(Rows x Columns)
Length x Width x Height
(mm)
Thermal Resistance
(°C/Watt @ 200 LFPM)
Pressure Drop
(inches of water)
Part Number
APF19-19-06CB
APF19-19-10CB
APF19-19-13CB
APF30-30-06CB
APF30-30-10CB
APF30-30-13CB
APF40-40-06CB
APF40-40-10CB
APF40-40-13CB
12 x 2
12 x 2
12 x 2
19 x 3
19 x 3
19 x 3
26 x 4
26 x 4
26 x 4
19 x 19 x 6.3
19 x 19 x 9.5
19 x 19 x 12.7
30 x 30 x 6.3
30 x 30 x 9.5
30 x 30 x 12.7
40 x 40 x 6.3
40 x 40 x 9.5
40 x 40 x 12.7
7.1
5.3
4.0
4.4
3.3
2.5
3.3
2.5
1.9
0.033
0.033
0.033
0.039
0.039
0.039
0.043
0.043
0.043
SERIES AER FORGED HEAT SINKS
Fin Matrix
(Rows x Columns)
Length x Width x Height
(mm)
Thermal Resistance
(°C/Watt @ 200 LFPM)
Pressure Drop
(inches of water)
Part Number
AER19-19-12CB
AER19-19-15CB
AER19-19-18CB
AER19-19-21CB
AER19-19-23CB
AER19-19-28CB
AER19-19-33CB
AER21-21-12CB
AER21-21-15CB
AER21-21-18CB
AER21-21-21CB
AER21-21-23CB
AER21-21-28CB
AER21-21-33CB
AER23-23-12CB
AER23-23-15CB
AER23-23-18CB
AER23-23-21CB
AER23-23-23CB
AER23-23-28CB
AER23-23-33CB
AER25-25-12CB
AER25-25-15CB
AER25-25-18CB
AER25-25-21CB
AER25-25-23CB
AER25-25-28CB
AER25-25-33CB
2 x 6
2 x 6
2 x 6
2 x 6
2 x 6
2 x 6
2 x 6
2 x 7
2 x 7
2 x 7
2 x 7
2 x 7
2 x 7
2 x 7
2 x 8
2 x 8
2 x 8
2 x 8
2 x 8
2 x 8
2 x 8
3 x 9
3 x 9
3 x 9
3 x 9
3 x 9
3 x 9
3 x 9
18.6 x 18.6 x 11.6
18.6 x 18.6 x 14.6
18.6 x 18.6 x 17.6
18.6 x 18.6 x 20.6
18.6 x 18.6 x 22.6
18.6 x 18.6 x 27.6
18.6 x 18.6 x 32.6
20.6 x 20.6 x 11.6
20.6 x 20.6 x 14.6
20.6 x 20.6 x 17.6
20.6 x 20.6 x 20.6
20.6 x 20.6 x 22.6
20.6 x 20.6 x 27.6
20.6 x 20.6 x 32.6
22.6 x 22.6 x 11.6
22.6 x 22.6 x 14.6
22.6 x 22.6 x 17.6
22.6 x 22.6 x 20.6
22.6 x 22.6 x 22.6
22.6 x 22.6 x 27.6
22.6 x 22.6 x 32.6
24.6 x 24.6 x 11.6
24.6 x 24.6 x 14.6
24.6 x 24.6 x 17.6
24.6 x 24.6 x 20.6
24.6 x 24.6 x 22.6
24.6 x 24.6 x 27.6
24.6 x 24.6 x 32.6
7.2
6.6
5.4
4.7
4.3
3.8
3.3
7.2
6.6
5.4
4.7
4.3
3.8
3.3
6.2
5.4
4.4
3.8
3.5
3.1
2.7
5.3
4.6
3.8
3.3
3.0
2.7
2.4
0.017
0.017
0.017
0.017
0.017
0.017
0.017
0.017
0.017
0.017
0.017
0.017
0.017
0.017
0.018
0.018
0.018
0.018
0.018
0.018
0.018
0.020
0.020
0.020
0.020
0.020
0.020
0.020
MATERIAL:
6063 Aluminum Alloy, Black Anodized
4
CTS
®
SERIES AER FORGED HEAT SINKS
Fin Matrix
(Rows x Columns)
Length x Width x Height
(mm)
Thermal Resistance
(°C/Watt @ 200 LFPM)
Pressure Drop
(inches of water)
Part Number
AER27-27-12CB
AER27-27-15CB
AER27-27-18CB
AER27-27-21CB
AER27-27-23CB
AER27-27-28CB
AER27-27-33CB
AER29-29-12CB
AER29-29-15CB
AER29-29-18CB
AER29-29-21CB
AER29-29-23CB
AER29-29-28CB
AER29-29-33CB
AER31-31-12CB
AER31-31-15CB
AER31-31-18CB
AER31-31-21CB
AER31-31-23CB
AER31-31-28CB
AER31-31-33CB
AER33-33-12CB
AER33-33-15CB
AER33-33-18CB
AER33-33-21CB
AER33-33-23CB
AER33-33-28CB
AER33-33-33CB
AER35-35-12CB
AER35-35-15CB
AER35-35-18CB
AER35-35-21CB
AER35-35-23CB
AER35-35-28CB
AER35-35-33CB
AER38-38-12CB
AER38-38-15CB
AER38-38-18CB
AER38-38-21CB
AER38-38-23CB
AER38-38-28CB
AER38-38-33CB
AER40-40-12CB
AER40-40-15CB
AER40-40-18CB
AER40-40-21CB
AER40-40-23CB
AER40-40-28CB
AER40-40-33CB
AER43-43-12CB
AER43-43-15CB
AER43-43-18CB
AER43-43-21CB
AER43-43-23CB
AER43-43-28CB
AER43-43-33CB
AER45-45-12CB
AER45-45-15CB
AER45-45-18CB
AER45-45-21CB
AER45-45-23CB
AER45-45-28CB
AER45-45-33CB
3 x 9
3 x 9
3 x 9
3 x 9
3 x 9
3 x 9
3 x 9
3 x 9
3 x 9
3 x 9
3 x 9
3 x 9
3 x 9
26.6 x 26.6 x 11.6
26.6 x 26.6 x 14.6
26.6 x 26.6 x 17.6
26.6 x 26.6 x 20.6
26.6 x 26.6 x 22.6
26.6 x 26.6 x 27.6
26.6 x 26.6 x 32.6
28.6 x 28.6 x 11.6
28.6 x 28.6 x 14.6
28.6 x 28.6 x 17.6
28.6 x 28.6 x 20.6
28.6 x 28.6 x 22.6
28.6 x 28.6 x 27.6
28.6 x 28.6 x 32.6
30.6 x 30.6 x 11.6
30.6 x 30.6 x 14.6
30.6 x 30.6 x 17.6
30.6 x 30.6 x 20.6
30.6 x 30.6 x 22.6
30.6 x 30.6 x 27.6
30.6 x 30.6 x 32.6
32.6 x 32.6 x 11.6
32.6 x 32.6 x 14.6
32.6 x 32.6 x 17.6
32.6 x 32.6 x 20.6
32.6 x 32.6 x 22.6
32.6 x 32.6 x 27.6
32.6 x 32.6 x 32.6
34.6 x 34.6 x 11.6
34.6 x 34.6 x 14.6
34.6 x 34.6 x 17.6
34.6 x 34.6 x 20.6
34.6 x 34.6 x 22.6
34.6 x 34.6 x 27.6
34.6 x 34.6 x 32.6
37.1 x 37.1 x 11.6
37.1 x 37.1 x 14.6
37.1 x 37.1 x 17.6
37.1 x 37.1 x 20.6
37.1 x 37.1 x 22.6
37.1 x 37.1 x 27.6
37.1 x 37.1 x 32.6
39.6 x 39.6 x 11.6
39.6 x 39.6 x 14.6
39.6 x 39.6 x 17.6
39.6 x 39.6 x 20.6
39.6 x 39.6 x 22.6
39.6 x 39.6 x 27.6
39.6 x 39.6 x 32.6
42.1 x 42.1 x 11.6
42.1 x 42.1 x 14.6
42.1 x 42.1 x 17.6
42.1 x 42.1 x 20.6
42.1 x 42.1 x 22.6
42.1 x 42.1 x 27.6
42.1 x 42.1 x 32.6
44.6 x 44.6 x 11.6
44.6 x 44.6 x 14.6
44.6 x 44.6 x 17.6
44.6 x 44.6 x 20.6
44.6 x 44.6 x 22.6
44.6 x 44.6 x 27.6
44.6 x 44.6 x 32.6
5.2
4.5
3.7
3.1
2.9
2.7
2.3
4.4
3.8
3.2
2.7
2.5
2.4
2.2
3.4
3.3
2.7
2.3
2.1
1.9
1.7
3.4
2.9
2.4
1.9
1.7
1.5
1.3
3.3
2.9
2.4
2.1
1.8
1.5
1.3
3.2
2.7
2.2
1.9
1.8
1.5
1.3
2.6
2.4
1.9
1.7
1.5
1.4
1.2
2.4
2.1
1.7
1.5
1.3
1.2
1.1
2.3
1.9
1.6
1.4
1.2
1.1
0.9
0.020
0.020
0.020
0.020
0.020
0.020
0.020
0.020
0.020
0.020
0.020
0.020
0.020
0.020
0.014
0.014
0.014
0.014
0.014
0.014
0.014
0.012
0.012
0.012
0.012
0.012
0.012
0.012
0.018
0.018
0.018
0.018
0.018
0.018
0.018
0.025
0.025
0.025
0.025
0.025
0.025
0.025
0.026
0.026
0.026
0.026
0.026
0.026
0.026
0.027
0.027
0.027
0.027
0.027
0.027
0.027
0.020
0.020
0.020
0.020
0.020
0.020
0.020
3 x 9
3 x 11
3 x 11
3 x 11
3 x 11
3 x 11
3 x 11
3 x 11
3 x 11
3 x 11
3 x 11
3 x 11
3 x 11
3 x 11
3 x 11
4 x 12
4 x 12
4 x 12
4 x 12
4 x 12
4 x 12
4 x 12
4 x 13
4 x 13
4 x 13
4 x 13
4 x 13
4 x 13
4 x 13
4 x 14
4 x 14
4 x 14
4 x 14
4 x 14
4 x 14
4 x 14
4 x 15
4 x 15
4 x 15
4 x 15
4 x 15
4 x 15
4 x 15
4 x 16
4 x 16
4 x 16
4 x 16
4 x 16
4 x 16
4 x 16
MATERIAL:
6063 Aluminum Alloy, Black Anodized
5
CTS
®
FORGED HEAT SINKS WITH PIN FINS
DESIGN FEATURES
• Precision forging technology for high power
applications
• Omnidirectional pins
• Designed for BGA and other surface mount
packages
• Various mounting methods available
• Select from multiple fin heights
Width
PRODUCT BENEFITS
Length
• No special tools needed for assembly
• No additional holes required on the PCB
• Special clip easily snaps on and self-aligns
Height
SERIES APR FORGED ALUMINUM HEAT SINKS WITH PIN FINS
Fin Matrix
(Rows x Columns)
Length x Width x Height
(mm)
Thermal Resistance
(°C/Watt @ 200 LFPM)
Pressure Drop
(inches of water)
Part Number
APR19-19-12CB
APR19-19-15CB
APR19-19-20CB
APR19-19-25CB
APR27-27-12CB
APR27-27-15CB
APR27-27-20CB
APR27-27-25CB
APR29-29-12CB
APR29-29-15CB
APR29-29-20CB
APR29-29-25CB
APR33-33-12CB
APR33-33-15CB
APR33-33-20CB
APR33-33-25CB
APR35-35-12CB
APR35-35-15CB
APR35-35-20CB
APR35-35-25CB
APR38-38-12CB
APR38-38-15CB
APR38-38-20CB
APR38-38-25CB
APR40-40-12CB
APR40-40-15CB
APR40-40-20CB
APR40-40-25CB
APR43-43-12CB
APR43-43-15CB
APR43-43-20CB
APR43-43-25CB
5 x 5
5 x 5
5 x 5
5 x 5
8 x 8
8 x 8
8 x 8
8 x 8
8 x 8
8 x 8
8 x 8
8 x 8
9 x 9
9 x 9
9 x 9
9 x 9
10 x 10
10 x 10
10 x 10
10 x 10
11 x 11
11 x 11
11 x 11
11 x 11
11 x 11
11 x 11
11 x 11
11 x 11
12 x 12
12 x 12
12 x 12
12 x 12
18.6 x 18.6 x 11.6
18.6 x 18.6 x 14.6
18.6 x 18.6 x 19.6
18.6 x 18.6 x 24.6
26.6 x 26.6 x 11.6
26.6 x 26.6 x 14.6
26.6 x 26.6 x 19.6
26.6 x 26.6 x 24.6
28.6 x 28.6 x 11.6
28.6 x 28.6 x 14.6
28.6 x 28.6 x 19.6
28.6 x 28.6 x 24.6
32.6 x 32.6 x 11.6
32.6 x 32.6 x 14.6
32.6 x 32.6 x 19.6
32.6 x 32.6 x 24.6
34.7 x 34.7 x 11.6
34.7 x 34.7 x 14.6
34.7 x 34.7 x 19.6
34.7 x 34.7 x 24.6
37.1 x 37.1 x 11.6
37.1 x 37.1 x 14.6
37.1 x 37.1 x 19.6
37.1 x 37.1 x 24.6
39.6 x 39.6 x 11.6
39.6 x 39.6 x 14.6
39.6 x 39.6 x 19.6
39.6 x 39.6 x 24.6
42.1 x 42.1 x 11.6
42.1 x 42.1 x 14.6
42.1 x 42.1 x 19.6
42.1 x 42.1 x 24.6
7.7
7.4
4.9
4.6
5.3
4.4
3.1
2.8
3.9
3.7
2.6
2.5
3.8
3.2
2.4
1.9
3.5
2.9
2.0
1.8
3.3
2.7
1.9
1.5
2.8
2.3
1.6
1.4
2.5
2.0
1.5
1.2
0.013
0.013
0.013
0.013
0.015
0.015
0.015
0.015
0.018
0.018
0.018
0.018
0.020
0.020
0.020
0.020
0.022
0.022
0.022
0.022
0.025
0.025
0.025
0.025
0.027
0.027
0.027
0.027
0.029
0.029
0.029
0.029
MATERIAL: 6063 Aluminum Alloy, Black Anodized
6
CTS
®
FORGED COPPER HEAT SINKS WITH PIN FINS
DESIGN FEATURES
• Precision forging technology for high power
applications
• Omnidirectional pins
• Designed for BGA and other surface mount
packages
• Various mounting methods available
• Select from multiple fin heights
Width
PRODUCT BENEFITS
Length
• No special tools needed for assembly
• No additional holes required on the PCB
• Special clip easily snaps on and self-aligns
Height
SERIES CPR FORGED COPPER HEAT SINKS WITH PIN FINS
Fin Matrix
(Rows x Columns)
Length x Width x Height
(mm)
Thermal Resistance
(°C/Watt @ 200 LFPM)
Pressure Drop
(inches of water)
Part Number
CPR19-19-12U
CPR19-19-15U
CPR19-19-20U
CPR19-19-25U
CPR27-27-12U
CPR27-27-15U
CPR27-27-20U
CPR27-27-25U
CPR29-29-12U
CPR29-29-15U
CPR29-29-20U
CPR29-29-25U
CPR33-33-12U
CPR33-33-15U
CPR33-33-20U
CPR33-33-25U
CPR35-35-12U
CPR35-35-15U
CPR35-35-20U
CPR35-35-25U
CPR38-38-12U
CPR38-38-15U
CPR38-38-20U
CPR38-38-25U
CPR40-40-12U
CPR40-40-15U
CPR40-40-20U
CPR40-40-25U
CPR43-43-12U
CPR43-43-15U
CPR43-43-20U
CPR43-43-25U
5 x 5
5 x 5
5 x 5
5 x 5
8 x 8
8 x 8
8 x 8
8 x 8
8 x 8
8 x 8
8 x 8
8 x 8
9 x 9
9 x 9
9 x 9
9 x 9
10 x 10
10 x 10
10 x 10
10 x 10
11 x 11
11 x 11
11 x 11
11 x 11
11 x 11
11 x 11
11 x 11
11 x 11
12 x 12
12 x 12
12 x 12
12 x 12
18.6 x 18.6 x 11.6
18.6 x 18.6 x 14.6
18.6 x 18.6 x 19.6
18.6 x 18.6 x 24.6
26.6 x 26.6 x 11.6
26.6 x 26.6 x 14.6
26.6 x 26.6 x 19.6
26.6 x 26.6 x 24.6
28.6 x 28.6 x 11.6
28.6 x 28.6 x 14.6
28.6 x 28.6 x 19.6
28.6 x 28.6 x 24.6
32.6 x 32.6 x 11.6
32.6 x 32.6 x 14.6
32.6 x 32.6 x 19.6
32.6 x 32.6 x 24.6
34.7 x 34.7 x 11.6
34.7 x 34.7 x 14.6
34.7 x 34.7 x 19.6
34.7 x 34.7 x 24.6
37.1 x 37.1 x 11.6
37.1 x 37.1 x 14.6
37.1 x 37.1 x 19.6
37.1 x 37.1 x 24.6
39.6 x 39.6 x 11.6
39.6 x 39.6 x 14.6
39.6 x 39.6 x 19.6
39.6 x 39.6 x 24.6
42.1 x 42.1 x 11.6
42.1 x 42.1 x 14.6
42.1 x 42.1 x 19.6
42.1 x 42.1 x 24.6
6.4
6.0
4.1
3.9
4.6
4.0
2.9
2.5
4.1
3.6
2.5
2.4
3.0
2.5
1.8
1.6
3.0
2.6
1.8
1.7
2.7
2.4
1.8
1.7
2.4
2.0
1.6
1.5
2.1
1.9
1.3
1.2
0.016
0.016
0.016
0.016
0.016
0.016
0.016
0.016
0.017
0.017
0.017
0.017
0.016
0.016
0.016
0.016
0.018
0.018
0.018
0.018
0.013
0.013
0.013
0.013
0.018
0.018
0.018
0.018
0.019
0.019
0.019
0.019
MATERIAL: Copper, CU1100
7
CTS
®
CLIP STYLES
Nylon Plastic per UL94-V0
MATERIAL:
0.9mm +/- 0.3mm
Short Height
Color: Orange
1.7mm +/- 0.3mm
Medium Height
Color: Blue
3.3mm+/- 0.3mm
Tall Height
Color: Yellow
Component Size
Length x Width
(mm)
Clip Size
Length x Width x
Height (mm)
Part Number
C1919M
C2121M
C2323M
C2525M
C2727M
C2929M
C3131M
C3333M
C3535M
C3838M
C4040M
C4343M
C4545M
19 x 19
21 x 21
23 x 23
25 x 25
27 x 27
29 x 29
31 x 31
33 x 33
35 x 35
37.5 x 37.5
40 x 40
42.5 x 42.5
45 x 45
C1919S
C2121S
C2323S
C2525S
C2727S
C2929S
C3131S
C3333S
C3535S
C3838S
C4040S
C4343S
C4545S
C1919T
C2121T
C2323T
C2525T
C2727T
C2929T
C3131T
C3333T
C3535T
C3838T
C4040T
C4343T
C4545T
21.2 x 21.2 x 9.1
23.2 x 23.7 x 9.1
25.2 x 25.7 x 9.1
27.2 x 27.7 x 9.1
29.2 x 29.7 x 9.1
31.2 x 31.2 x 9.1
33.2 x 33.7 x 9.1
35.2 x 35.2 x 9.1
37.2 x 37.7 x 9.1
39.7 x 40.2 x 9.1
42.2 x 42.7 x 9.1
44.7 x 45.1 x 9.1
42.7 x 47.7 x 9.1
Width
Length
Case Height
Height
TAPE STYLES
Thermal
Dielectric
Strength
(V/mil)
Thermal
Tape
Thickness
Impedance
2
Supplier
(mm)
(°C-in. /W)
Description
A01
T410
T411
T412
8815
CTS
0.13
0.82
1.10
1.00
0.25
1.20
4,000
N/A
Double-sided acrylic adhesive
®
on a Kapton MT carrier
Chomerics
Chomerics
Chomerics
3M
0.18
0.28
0.23
0.38
Double-sided acrylic adhesive loaded with
aluminum oxide on an aluminum foil carrier
N/A
Double-sided silicone adhesive with
expanded aluminum mesh carrier
N/A
Doubled-sided acrylic adhesive loaded with
titanium diboride on an expanded aluminum carrier
668
Double-sided acrylic adhesive loaded
with ceramic particles
ORDERING INFORMATION
CLIP
ADHESIVE
AER - 19-19-12 - CB - /A01
®
Short “/S”
Medium “/M”
Tall “/T”
Double-sided Kapton “/A01”
Part Number Series
Mounting Options
®
Chomerics Thermattach
(Clip or Adhesive)
“/T410, T411, or T412”
Commercial Black Anodize
Dimensions in mm (LxWxH)
™
3M “/8815”
8
CTS
®
STANDARD AND CUSTOM EXTRUSIONS
CTS specializes in using standard extrusion profiles
and manufacturing custom products for your unique
design. Our extruded heat sinks are designed for high
power semiconductors and are ideal where cost is a
factor. We provide special assistance with engineering,
manufacturing and expedited deliveries to meet your
specific requirements.
CTS maintains a large inventory of extrusions for
custom designs. Modified profiles can be tooled quickly
and cost-effectively. Below are just a few of the many
profiles available. Please contact CTS for additional
information.
CUSTOM EXTRUDED PRODUCTS AND STANDARD PROFILES
9
CTS
®
ADDITIONAL EXTRUDED PRODUCTS FOR TO-126, TO-202, TO-218 AND TO-220 TRANSISTORS
7-338 & 7-339-1, -2, -3, -4
7-340-1, -2, -3, -4
7-345-1, -2, -3, -4
10
CTS
®
STANDARD ZIF CIRCUIT BOARD RETAINERS
THREE ZIF CONFIGURATIONS
■
STANDARD ZIF (coldwall mounted)
ZIF III (PCB mounted)
■
■
MACHINED ZIF (ZIF geometry
machined into coldwall)
GENERAL DESCRIPTION
The ZIF retainer is a totally self-contained, precision with tapped holes for M3x.5 metric hardware, or left
assembly that provides a highly effective thermal interface undrilled with only index pins for vacuum brazing, dip
between the circuit board and coldwall. Board lengths brazing or epoxy bonding.
between 1-1/2” and 12” can be accommodated.
A ZIF retainer consists of:
Engineers who specify the ZIF retainer can have
confidence that it will perform as described. Complete
product specifications are available upon request.
(1) an aluminum housing
(2) a rod/cam assembly constructed from an aluminum
The following CTS laboratory test procedures, reports
or stainless steel double flat rod extrusion. The ZIF and results are available upon request:
rod assembly is driven by one of three options: pin,
• thermal performance testing
hex-head or screwdriver slot
• shock testing
(3) a beryllium copper spring
• vibration testing
• torque testing
• life cycling
ZIF retainers are mounted to any flat metal surface
(coldwall). The standard configuration is attached with 4-40
hardware. However, the retainer housing can be supplied
DESIGN FEATURES
■
QUICK LOCKING ACTION
The locking operation which secures the PCB in the ZIF retainer requires only a 1/4 turn of the
rod assembly.
■
■
■
■
■
UNIFORM HEAT TRANSFER
Uniform clamping pressure eliminates hot spots along the PCB interface producing an even
distribution of heat along the entire edge.
COMPLETE INTERCHANGEABILITY
ZIF component parts are designed to assure consistent performance and interchangeability of
all identical part numbers.
OPERATING ENVIRONMENT
ZIF characteristics are unaffected by adverse environments typically encountered in military
and industrial applications.
VISUAL INDICATION
ZIF provides a visual indication that the rods are in the “open” or “closed” position relative to
the position of the drive assembly.
MAINTAINABILITY
The unique design and interchangeability of like parts
make field repairs quick and simple. Repairs
can be accomplished without the use of any special tools. Although ZIF retainers have been tested
for over a thousand lock-unlock cycles, they have been derated and specified for 400 fully loaded
cycles. This, in most cases, will exceed the overall system life, virtually eliminating service or
maintenance to ZIF assemblies.
11
CTS
®
SPECIFICATIONS
To Lock
To Unlock
Housing
Cam Shaft
Unlocked,
Locked, Maximum
Clamping Force
Position
Zero-Insertion
Force (ZIF)
Position
Spring
Circuit Board or
Thermal Management
Frame
Coldwall or
Mounting Surface
ZIF OPERATION
.090±.001R
(2.29±0.03)
ZIF ROD DISPLACEMENT CURVE
.055 (1.40)R
TYP (4 PLC)
BOTH SIDES
The ZIF cam detent design gives
added assurance that a PCB will remain
securely locked in position even under
extreme vibration and shock levels.
Detent action occurs during the final 15
degrees of cam rotation and virtually
eliminates any possibility of the cam
unlocking under environmental stress.
A positive mechanical detent is built into the
cam rod shown here in cross section.
3°C-inch
WATT
2°C-inch
WATT
(
)
(
)
Improving the thermal conductivity of
circuit board retainers enhances system
performance by increasing the reliability
of electronic components and circuit
modules.
Extensive testing of ZIF retainers in
the CTS Engineering Test Laboratory
demonstrates that they have the best
thermal performance of any circuit board
retainer available.
FOR MECHANICAL RETENTION
PER PAIR
Clamping pressure is not only Technical Assistance for Custom
essential to heat transfer, but also a Designs - Our engineering staff has
critical requirement for retention of extensive experience in the packaging of
PCBs under severe shock and vibration. ZIF retainers. Modification of standard
ZIF retainers have been subjected to the housings, cams and spring configurations
most extreme test conditions specified in for special design applications is frequently
MIL-STD-810C.
possible. Contact the CTS factory in
Nominal retention force for a circuit Burbank, California. We welcome the
board held captive by a pair of ZIF opportunity of providing you with the
retainers (I/O connector excluded) is assistance needed to solve all of your
shown in the graph at the left.
thermal management problems.
12
CTS
®
ORDERING INFORMATION
Z A S 1 1 1 - 062 - 15 R* - B B U
ZIF Designation
Spring Plating
U=Unplated
Assembly Option
A=Assembled K=Kit
B=Black Cadmium
N=Nickel
Rod Plating
ꢀounting ꢀethod
B=Brazed
B=Black Anod. Aluminum Rods
S=Screws 4-40
P=Passivated, Steel Rods
M=Metric Screws (M3x0.5)
Housing Series
Housing Plating
B=Black Anodize
U=Unplated
1=Without Pins
2=With .062x.040
R=Chem. Film
Extended Aluminum Index Pins
R=Right Hand Part
Rod Assembly
L=Left Hand Part
1=Pin Drive, Aluminum Rod (6” Max.)
2=Pin Drive, Steel Rod
Assembly Length in .5” Increments x 2
Ex: 7.5”=15
3=Slot Drive, Steel Rod (4.5” Max.)
4=1/4 Hex Drive, Aluminum Rod
7=3/16 Hex Drive, Steel Rod
①S=3/16 Hex Drive, Steel Rod
①Z=1/8” Socket Head Cap, Steel Rod
*All assembled ZIFs must have a left or right designation.
Any kit with a 1/4 inch hexhead drive must have a left or right designation.
Spring Series
①Visual identification slot painted yellow.
1=Current Design
Board Thickness (± ±005 ꢀaꢁ±.
.031”
.050”
.062”
.084”
.093”
.125”
ROD STYLES
.250”
6.35mm
B
C
Visual Identification Slot
A±.005
.3125”
.250”
7.9375mm
6.35mm
*.50”
12.7mm
SCREW MOUNTED
PARTS ONLY
Fig. 1
(Pin Drive)
.1875”
4.7625mm
3.175mm
.036”
.125”
.15”
TYPE 1 HOUSING
+.002
*.25”
9.14mm
3.81mm
6.35mm
Fig. 4
.062”
DIA. x
—.001
*E
(3/16” Hexhead Drive)
.125 MIN DEEP
*F
(2 PLC ALL PARTS)
.385±.010”
Fig. 2
9.779±.254mm
*G
.250”
.125”
ALLEN
(Screwdriver Slot Drive)
.250”
(LOCATING PIN HOLES)
6.35mm
*H
K REF
TYPE 2 HOUSING
.062 x .040”
WRENCH
L MAX
6.35mm
*J
1.5748 x 1.016mm
EXTENDED ALUMINUM
INDEX PINS
*TOLERANCE ±.005
.220”
5.558mm
.250”
.040”
Fig. 5
.20”
6.35mm
1.016mm
ON TYPE 2
(1/8” Socket Head Cap)
5.08mm
.175-.195”
HOUSING ONLY
Fig. 3
4.445-4.953mm
BOARD INSERTION DEPTH
(1/4” Hexhead Drive)
ROD TYPE
DESIG. FIG. NO. MATERIAL MAX. SPRING LENGTH
ZIF HOUSING DIMENSIONS
4-40 MOUNTING HOLES
LENGTH
SPRING
A
NO. OF
MNTG.HOLES
2
DESIGNATION LENGTH .00ꢀ
B
.75
C
D
E
F
G
—
—
—
—
—
—
—
H
—
—
—
—
—
—
—
—
—
—
—
—
J
ZRA1
ZRA2
ZRA3
ZRA4
ZRA7
1
1
2
3
4
4
aluminum
steel
steel
aluminum
steel
steel
6 inches
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
1.5
1.5
1.5
3
1.50
2.00 1.00
2.50 1.25
—
—
—
.50 1.25 —
1.00 1.75 —
1.50 2.25 —
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
10.5 inches
4.5 inches
10.5 inches
10.5 inches
10.5 inches
2
2
3
3
3
3
4
4
4
4
4
5
5
5
5
6
6
6
3.00
.75 1.5 2.00 1.50 2.75
3
3
3.50 1.00 1.5 2.50 1.75 3.25
4.00 1.25 1.5 3.00 2.00 3.75
①ZRAS
4.5
4.5
4.5
6
4.50
.75 3.0 3.50 2.25 4.25
5.00 1.00 3.0 4.00 1.75 3.25 4.75
5.50 1.25 3.0 4.50 2.00 3.50 5.25
6.00
ZIF circuit board retainers
are available in several standard
configurations.When ordering
standard ZIF assemblies, kits
or individual components,
please refer to the ZIF identi-
fication number guide shown
above. Custom ZIF retainers
will be assigned special part
number identification.
BOARD
K
REF
.094”
L
THICK
MAX
.75 4.5 5.00 2.00 4.00 5.75
.031”
.400”
.787mm 2.388mm 10.16mm
.050” .075” .400”
1.27mm 1.905mm 10.16mm
.062” .063” .400”
1.575mm 1.600mm 10.16mm
.084” .063” .422”
2.134mm 1.600mm 10.719mm
.093” .079” .447”
2.362mm 2.007mm 11.354mm
.125” .082” .478”
3.175mm 2.083mm 12.141mm
6
6
6.50 1.00 4.5 5.50 2.25 4.25 6.25
7.00 1.25 4.5 6.00 2.50 4.50 6.75
7.5
7.5
7.5
9
7.50 2.25 3.0 6.50 2.00 3.75 5.50 7.25
8.00 2.50 3.0 7.00 2.00 4.00 6.00 7.25
8.50 2.75 3.0 7.50 2.25 4.25 6.25 8.25
9.00 3.75 1.5 8.00 2.50 4.50 6.50 8.75
9
9
9.50 4.00 1.5 8.50 2.00 3.75 5.75 7.50 9.25
10.00 4.25 1.5 9.00 2.00 4.00 6.00 8.00 9.75
10.5
10.50 5.25 — 9.50 2.25 4.25 6.25 8.25 10.25
All dimensions are in inches unless otherwise noted.
13
CTS
®
ZIF III CIRCUIT BOARD RETAINERS
GENERAL DESCRIPTION
DESIGN FEATURES
ZIF III retainers are the latest in the state-of-the-art
PC board mountable retainers. Unlike other designs on the
market, CTS’s ZIF III features a quick, quarter-turn locking
mechanism that provides for a positive and fast assembly.
Its unique locking design produces a uniform pressure
distribution along the PCB edge for the absolute best heat
transfer and resistance to extreme shock and vibration. It will
not warp your circuit boards unlike some others available
in the market. If you have high density PC board mounting
applications for military, space, medical, industrial controls,
computers and communications, you need ZIF III Circuit
Board Retainers.
■
■
■
■
■
■
PC BOARD MOUNTABLE
POSITIVE 1/4 TURN LOCKING
FIELD MAINTAINABLE
QUICK AND EASY INSTALLATION
SUPERIOR MECHANICAL RETENTION
0.9 °C-INCH/WATT
THERMALLY EFFICIENT,
COLD PLATE
RECOMMENDED GAP:
PC BOARD THICKNESS +0.300”
TOTAL COMBINED TOLERANCE FOR
PCB AND COLD PLATE: ±0.007”
THERMAL IMPEDANCE IS
0.9 °C-IN/WATT
PULL OUT FORCE IS 210
LBS FOR A PAIR OF 6
INCH RETAINERS
1/4 TURN LOCKING
NO TORQUE WRENCH
REQUIRED
PC BOARD WITH ZIF III RETAINER
U.S. Patent No. 5,200,882
14
CTS
®
ORDERING INFORMATION
Z 3 A 3 7 S B -
3
-
B N L
ZIF III DESIGNATION
R=Right Hand Part
L=Left Hand Part
TOP ASSEMBLY OPTION
A=Assembled B=Kit
SPRING FINISH
LENGTH OF HOUSING ASSEMBLY
15=1.50 Inch
U=Unplated
B=Black Cadmium
N=Nickel
22=2.25 Inch
30=3.00 Inch
37=3.75 Inch
SPRING MATERIAL
B=Be Cu
45=4.50 Inch
52=5.25 Inch
ROD TYPE
60=6.00 Inch
1=Pin Drive, Aluminum Rod
67=6.75 Inch
4.5” Max.
75=7.50 Inch
2=Pin Drive, Stainless Steel
Consult factory for custom or longer lengths.
3=Slot Drive, Stainless Steel
3.75” Max.
MOUNTING TYPE
S=Screw Mounting (2-56)
7=3/16 Hex Drive, Stainless
B=No Holes
Steel
I=2-56 Helical Insert (Locking)
M=Screw Mounting (M3x.05)
S=Type 7 With Painted
Indicator
HOUSING FINISH
B=Black Anodize
U=Unplated
Z=1/8” Socket Head Cap,
Stainless Steel Rod
R=Chemical Film
SPECIFICATIONS
.220”
3
/
”
.3125”
.181”
16
5.558mm
7.938mm
4.597mm
HEX HEAD
MOUNTING TYPE
.125”
.125”
3.175mm
ALLEN
WRENCH
INDICATOR
SLOT
.250”
.250”
.12”
.250”
B
6.35mm
6.35mm
3.048mm
6.35mm
PIN DRIVE
TYPE 1 & 2
SCREWDRIVER SLOT
TYPE 3
HEX HEAD DRIVE
TYPE 7 & S
SOCKET HEAD CAP
TYPE Z
(A)
C
ROD STYLES
.150”
3.81mm
2 PL
THERMAL IMPEDANCE
BETWEEN PC BOARD AND
COLD PLATE IS 0.9 °C IN/WATT
ROD (IN UNLOCKED POSITION)
TO LOCK TURN ROD 90° CCW
(ROD HEX HEAD NOT SHOWN
FOR CLARITY)
A
A
.15”
BOARD THK.
BSC
BSC
.180”
4.572mm
2 PL
3.81mm
B
C
DIM
ADIM
DIM
1.500”
38.10mm
2.250”
—
—
—
—
—
—
—
—
—
1.250”
31.75mm
2.000”
50.80mm
2.750”
69.85mm
3.500”
88.90mm
4.250”
107.95mm
5.000”
127.00mm
5.750”
146.05mm
6.500”
165.10mm
7.250”
BOARD THK.
.32”
8.128mm
+ .300±.007”
7.62±.178mm
57.15mm
3.000”
76.20mm
3.750”
95.25mm
4.500”
114.30mm
5.250”
133.35mm
6.000”
152.40mm
6.750”
171.45mm
7.500”
190.50mm
MAX. SCREW
ENGAGEMENT
.087”
.15”
3.81mm
3/16” SOCKET WRENCH WITH
.300 DIA. (IF NECESSARY,
2.1mm
HOUSING
COLD PLATE
MODIFY COLD PLATE TO CLEAR
SOCKET WRENCH HEAD
ROD
—
—
—
ROD (IN LOCKED POSITION)
LEFT HAND PART
UNLOCK
RIGHT HAND PART
.250”
6.35mm
SPRING
SECTION A—A
LOCK
LOCK
UNLOCK
2.875”
7.03mm
3.250”
82.55mm
3.625”
92.08mm
TOTAL WEIGHT PER ASSEMBLY:
ALUMINUM ROD 3.42 GRAM/IN.
Dimensions are for reference use only. Contact CTS for
dimensions with tolerances or standard part drawings.
STAINLESS STEEL 5.23 GRAM/IN.
184.15mm
All dimensions are in inches unless otherwise noted.
15
CTS
®
MACHINED ZIF ENCLOSURES
GENERAL DESCRIPTION
MACHINED ZIF represents a step forward in providing
more design flexibility for military and industrial users
of circuit board retainers. The ZIF retainer can now be
machined directly into the chassis or coldwall without the
need for brazing. This manufacturing breakthrough
improves chassis producibility, adds structural integrity
and provides the best thermal performance of any
retainer available.
Fin pins can be machined to .012 inches with a pitch
of 18 fins per inch without brazing. The MACHINED
ZIF technology provides up to 45% more heat transfer
capability than conventional wedge style retainers.
The MACHINED ZIF 1/4 turn locking feature
enhances product maintainability and never requires a
torque wrench when engaging.
DESIGN FEATURES
■
■
■
■
■
QUICK LOCKING ACTION
The locking operation that secures the PCB in the
ZIF retainer requires only a 1/4 turn of the rod
assembly.
UNIFORM HEAT TRANSFER
NOTE:
Uniform clamping pressure eliminates hot spots along
the PCB interface producing an even distribution of
heat along the entire edge.
The photographs featured on this page are samples
of one of many special configurations CTS can tailor make
meeting customers’ critical design specifications.
COMPLETE INTERCHANGEABILITY
ZIF component parts are designed to assure consistent
performance and interchangeability of all identical
part numbers.
OPERATING ENVIRONMENT
MACHINED ZIF characteristics are unaffected
by adverse environments typically encountered
in military and industrial applications.
VISUAL INDICATION
ZIF provides a visual indication that the rods are
in the “open” or “closed” position relative to the
position of the drive assembly. This indication
can be painted yellow upon request.
■
MAINTAINABILITY
The unique design and interchangeability of the like
parts make field repairs quick and simple. Repairs can
be accomplished without the use of any special tools.
U.S. Patent No. 4,979,073
16
CTS
®
SPECIFICATIONS
To Lock
To Unlock
Housing
Cam Shaft
Spring
Circuit Board or
Thermal Management
Frame
Cold Wall or
Unlocked,
Zero-Insertion Force
(ZIF)
Mounting Surface
Locked, Maximum
Clamping Force
Position
Position
ZIF OPERATION
CIRCUIT CARD
ASSEMBLY
COLDWALL
MAX. PCB
INSERTION
COLDWALL CONFIGURATION
.240”
6.096mm
Cooling area can be
.250”
forced air, liquid or
natural convection.
Finned areas can be
machined in where
necessary.
6.35mm
.3125”
Visual Identification Slot
7.938mm
.250”
6.35mm
Fig. 1
(Pin Drive)
.036”
.125”
3
MIN. ZIF TO
.370”
.914mm
/
3.175mm
9.398mm
.150”
16
HEAT SINK
3.81mm
Fig. 3
THERMAL IMPEDANCE:
(Hexhead Drive)
Board to sink: 1.28°C-Inch/Watt
Fig. 2
MINIMUM PCB SPACING (inches):
(Screwdriver Slot Drive)
Center to center: .375” + PCB thickness
MINIMUM BOARD THICKNESS:
ROD STYLES
.050”
ORDERING INFORMATION
Machined ZIF Enclosures are custom designed to Applications Engineering Department in Burbank,
meet customer specifications. Please contact CTS California for technical assistance.
17
CTS
®
iZIF™ HEAT FRAME
GENERAL DESCRIPTION
™
The iZIF is a custom aluminum heat frame that integrates
the PCB retainer for improved structural integrity and thermal
™
efficiency (.8°C-in./W). The iZIF is a highly reliable patent-
pending design for rugged military and aerospace circuit card
applications. It features a quarter-turn lock, uniform clamping
pressure, and can be sized to fit small daughter cards up to
9U VME. A bottom plate may also be added for additional
™
cooling and structural integrity. The iZIF features a 1/8”
stainless steel socket head cap rod with beryllium copper
spring. A variety of finishes are available such as chemical
film, black anodize, and electroless nickel.
THERMAL LINKS
GENERAL DESCRIPTION
CTS’s thermal links provide superior retention because
There is excellent transistor retention under high
of the 6 to 8-segment fingers versus the 2 or 3-segment vibration and shock loads. The thermal links can be
fingers available from other manufacturers. These thermal inserted and removed multiple times without loss of
links are offered for TO-5s, TO-8s and TO-18s with or retention or damage to the finish over the entire JEDEC
without BeO washer and other appropriate hardware.
case diameter range. They can be installed with a rivet or
They provide an effective retainer and efficient thermal eyelet, soldered to a PC pad or heat sink, mounted with a
path between semiconductor and heat sinks or chassis.
single screw or with a threaded stud and hex nut.
FAN TOP SERIES
A
B
Fan Tops
Part Number
“A”
“B” Semiconductor
Dim.
Dim.
Case Type
*Ø °C/W
Unplated
Black Cadmium
Black Chem.
Material
.25
.25
.25
.25
.36
.50
.50
TO-18
TO-18
TO-5
TO-5
TO-5
150.0
150.0
81.1
TXBF-019-025U TXBF-019-025B
TXCF-019-025U N.A.
TXBF-032-025U TXBF-032-025B
N.A.
TXCF-019-025CB
N.A.
BeCu
Brass
.75
BeCu
.75
81.1
TXCF-032-025U
N.A.
TXCF-032-025CB
N.A.
Brass
1.25
57.7
TXBF2-032-036U TXBF2-032-036B
Brass Fan
BeCu Retainer
Brass Fan
BeCu Retainer
Brass
.33
1.25
TO-8
41.0
TXBF2-050-033U TXBF2-050-033B
N.A.
.12
.12
1.25
1.25
TO-5
TO-8
56.6
56.6
TXCF-125-1U
TXCF-125-2U
TXCF-125-1CB
TXCF-125-2B
N.A.
N.A.
Brass
*Natural convection, case-ambient mounted on G10 board
18
CTS
®
THERMAL LINKS FOR TO-5, TO-8 AND TO-18 TRANSISTORS
Thermal Link Retainers Without BeO Insulators
Part Number
Black Cadmium Finish Dull Nickel Finish
Mounting
Method
Fig. Semiconductor
#
Case Type
1
2
3
3
4
5
6
7
7
8
TO-18
TO-18
TO-18
TO-18
TO-18
TO-5
TXBE-019-021B
TXB2P-019-028B
TX1807B
TXBE-019-021ND
TXB2P-019-028ND
TX1807ND
Rivet/Solder
2-56 Screw
4-40 Stud
TX1807-1B
TX1807-1ND
6-32 Stud
TX1847B
TX1847ND
2-56 Hex Nut
Rivet/Solder
4-40 Screw
6-32 Stud
10-32 Stud
14-40 Hex Nut
TXBE-032-031B
TXB2P-032-037B
TX0507-1B
TXBE-032-031ND
TXB2P-032-037ND
TX0507-1ND
TO-5
TO-5
TO-5
TX0507-2B
TX0547B
TX0507-2ND
TX0547ND
TO-5
Dimensions are for reference use only. Contact CTS for
dimensions with tolerances or standard part drawings.
Thermal Link Retainers With BeO Insulators
Part Number
Black Cadmium Finish Dull Nickel Finish
Mounting
Method
Fig. Semiconductor
#
Case Type
1
1
2
2
3
4
5
5
6
6
7
8
TO-18
TO-18**
TO-18
TO-18
TO-18
TO-18
TO-5
TXP1803B
TXP1808B
TX1806B
TX1806-1B
TX1822B
—
TXP0503B
TXP0508B
TX0506-1B
TX0506-2B
TX0522B
—
TXP1803ND
TXP1808ND
TX1806ND
2-56 Screw
2-56 Screw
4-40 Stud
6-32 Stud
2-56 Hex Nut
Solder
4-40 Screw
4-40 Screw
6-32 Stud
10-32 Stud
4-40 Hex Nut
Solder
TX1806-1ND
TX1822ND
TX1805-ND
TXP0503ND
TXP0508ND
TX0506-1ND
TX0506-2ND
TX0522ND
TO-5**
TO-5
TO-5
TO-5
TO-5
TX0505-ND
**BeO and thermal link are brazed together.
Dimensions are for reference use only. Contact CTS for
dimensions with tolerances or standard part drawings.
THERMAL LINKS FOR TO-8s
Thermal Link Retainers Without BeO Insulators
Part Number
Black Cadmium Finish Dull Nickel Finish
Mounting
Method
Max. Weight
(Grams)
Case
Diameter
TXBE-045-028B
TXB2P-045-037B
TXBE-050-028B
TXB2P-050-037B
TXBE-055-028B
TXB2P-055-037B
TXBE-045-028ND Solder, Epoxy, Rivet
TXB2P-045-037ND 4-40 Screw
TXBE-050-028ND Solder, Epoxy, Rivet
TXB2P-050-037ND 4-40 Screw
TXBE-055-028ND Solder, Epoxy, Rivet
TXB2P-055-037ND 4-40 Screw
1.5
4.5
1.5
4.5
1.5
4.5
0.455
0.455
0.500
0.500
0.550
0.550
TXBE-050-028
TXB2P-050-037
Screw and shouldered nylon washer for .060 chassis included;
If mounting hardware not desired, deleted “P” from part number.
Dimensions are for reference use only. Contact CTS for
dimensions with tolerances or standard part drawings.
19
CTS
®
HEAT SINKS FOR METAL AND PLASTIC CASE, CASE-MOUNTED SEMICONDUCTORS
LB Series
Part Number
Comm’l Black
Semiconductor
Case Type
“A”
*Ø °C/W
Unplated
LB66B2U
Military Black
LB66N2B
Dim.
TO-66
19.7
LB66B2CB
.31
.50
TO-126/127/220
20.8
TO-66
17.1
16.5
LB66B1U
LB66B1CB
LB66B1B
TO-126/127/220
LA-A Series
Part Number
Comm’l Black
Semiconductor
Case Type
“A”
Dim.
*Ø °C/W
Unplated
Military Black
TO-66
TO-66
TO-66
19.7
16.3
14.4
LAD66A2U
LAD66A3U
LAD66A4U
LAD66A2CB
LAD66A3CB
LAD66A4CB
LAD66A2B
LAD66A3B
LAD66A4B
.50
.75
1.00
TO-126/127/220
TO-126/127/220
TO-126/127/220
20.0
17.0
14.7
LAE66A2U
LAE66A3U
LAE66A4U
LAE66A2CB
LAE66A3CB
LAE66A4CB
LAE66A2B
LAE66A3B
LAE66A4B
.50
.75
1.00
LA-B Series
Part Number
Comm’l Black
LAD66B2CB
LAD66B3CB
LAD66B4CB
LAD66B5CB
Semiconductor
Case Type
“A”
*Ø °C/W
Unplated
Military Black
Dim.
TO-66
TO-66
TO-66
TO-66
14.3
12.1
10.7
9.8
LAD66B2U
LAD66B3U
LAD66B4U
LAD66B5U
LAD66B2B
LAD66B3B
LAD66B4B
LAD66B5B
.50
.75
1.00
1.25
TO-3
TO-3
TO-3
TO-3
14.1
12.0
10.3
9.3
LAT03B2U
LAT03B3U
LAT03B4U
LAT03B5U
LAT03B2CB
LAT03B3CB
LAT03B4CB
LAT03B5CB
LAT03B2B
LAT03B3B
LAT03B4B
LAT03B5B
.50
.75
1.00
1.25
Any TO-3
Any TO-3
Any TO-3
Any TO-3
15.3
12.9
11.2
10.0
LA363B2U
LA363B3U
LA363B4U
LA363B5U
LA363B2CB
LA363B3CB
LA363B4CB
LA363B5CB
LA363B2B
LA363B3B
LA363B4B
LA363B5B
.50
.75
1.00
1.25
TO-126
TO-126
TO-126
TO-126
15.0
12.9
11.4
9.7
LAT0126B2U
LAT0126B3U
LAT0126B4U
LAT0126B5U
LAT0126B2CB
LAT0126B3CB
LAT0126B4CB
LAT0126B5CB
LAT0126B2B
LAT0126B3B
LAT0126B4B
LAT0126B5B
.50
.75
1.00
1.25
TO-127/220
TO-127/220
TO-127/220
TO-127/220
15.0
12.9
11.4
9.7
LAT0127B2U
LAT0127B3U
LAT0127B4U
LAT0127B5U
LAT0127B2CB
LAT0127B3CB
LAT0127B4CB
LAT0127B5CB
LAT0127B2B
LAT0127B3B
LAT0127B4B
LAT0127B5B
.50
.75
1.00
1.25
—
—
—
—
LA394B2U
LA394B3U
LA394B4U
LA394B5U
LA394B2CB
LA394B3CB
LA394B4CB
LA394B5CB
LA394B2B
LA394B3B
LA394B4B
LA394B5B
.50
.75
Universal
Hole
1.00
1.25
Pattern
*Natural convection, case-ambient mounted on G10 board
20
CTS
®
UP3 Series
Part Number
Comm’l Black
UP3-TO66-CB
UP3-TO3-CB
UP3-425-CB
Semiconductor
Case Type
*Ø °C/W
14.2
13.6
—
Unplated
UP3-TO66-U
UP3-TO3-U
UP3-425-U
Military Black
UP3-TO66-B
UP3-TO3-B
UP3-425-B
TO-66
TO-3
Universal
TO-126
TO-127/220
Universal
15.0
15.0
—
UP3-TO126-U
UP3-TO127-U
UP3-425-U
UP3-TO126-CB
UP3-TO127-CB
UP3-425-CB
UP3-TO126-B
UP3-TO127-B
UP3-425-B
2 each
13.6
UP3-456-U
UP3-456-CB
UP3-456-B
TO-126/127/220
UP10 Series
Part Number
Comm’l Black
Semiconductor
Case Type
*Ø °C/W
Unplated
Military Black
2 each Universal
1 each TO-3
N.A.
8.7
UP10-426-2U
UP10-TO3-U
UP10-426-2CB
UP10-TO3-CB
UP10-426-2B
UP10-TO3-B
2 each
TO-126/127/220
Universal
7.5
UP10-TO127-U UP10-TO127-CB UP10-TO127-B
N.A.
UP10-426-2U
UP10-426-2CB
UP10-426-2B
UP, UP1 and UP2 Series
Part Number
Comm’l Black
UP1-TO66-CB
UP2-TO66-CB
UP-TO66-CB
Semiconductor
“A”
Case Type
*Ø °C/W
Unplated
UP1-TO66-U
UP2-TO66-U
UP-TO66-U
Military Black
UP1-TO66-B
UP2-TO66-B
UP-TO66-B
Dim.
TO-66
TO-66
TO-66
11.5
.50
9.6
.75
7.9
1.00
TO-3
TO-3
TO-3
10.4
8.3
UP1-TO3-U
UP2-TO3-U
UP-TO3-U
UP1-TO3-CB
UP2-TO3-CB
UP-TO3-CB
UP1-TO3-B
UP2-TO3-B
UP-TO3-B
.50
.75
7.1
1.00
Universal
Universal
Universal
—
—
—
UP1-420-U
UP2-420-U
UP-420-U
UP1-420-CB
UP2-420-CB
UP-420-CB
UP1-420-B
UP2-420-B
UP-420-B
.50
.75
1.00
TO-126
TO-126
TO-126
11.7
9.4
UP1-T0126-U
UP2-T0126-U
UP-T0126-U
UP1-T0126-CB
UP2-T0126-CB
UP-T0126-CB
UP1-T0126-B
UP2-T0126-B
UP-T0126-B
.50
.75
8.2
1.00
TO-127/220
TO-127/220
TO-127/220
11.7
9.4
UP1-T0127-U
UP2-T0127-U
UP-T0127-U
UP1-T0127-CB
UP2-T0127-CB
UP-T0127-CB
UP1-T0127-B
UP2-T0127-B
UP-T0127-B
.50
.75
8.2
1.00
2 each TO-126 or
2 each TO-127 or
2 each TO-220
10.7
8.3
UP1-T0127-2U UP1-T0127-2CB UP1-T0127-2B
UP2-T0127-2U UP2-T0127-2CB UP2-T0127-2B
.50
.75
7.4
UP-T0127-2U
UP-T0127-2CB
UP-T0127-2B
1.00
HP1 Series
Part Number
Comm’l Black
HP1-TO66-CB
HP1-TO3-CB
HP1-420-CB
Semiconductor
Case Type
*Ø °C/W
6.0
5.4
—
Unplated
HP1-TO66-U
HP1-TO3-U
HP1-420-U
Military Black
HP1-TO66-B
HP1-TO3-B
HP1-420-B
TO-66
TO-3
Universal
TO-126
6.5
6.5
5.6
HP1-TO126-U
HP1-TO127-U
HP1-TO126-CB
HP1-TO127-CB
HP1-TO126-B
HP1-TO127-B
TO-127/220
Dual TO-127/220
HP1-TO127-4U HP1-TO127-4CB HP1-TO127-4B
HP3 Series
Part Number
Semiconductor
Case Type
*Ø °C/W
Unplated
Comm’l Black
Military Black
TO-66
TO-3
5.0
4.4
—
HP3-TO66-U
HP3-TO3-U
HP3-420-U
HP3-TO66-CB
HP3-TO3-CB
HP3-420-CB
HP3-TO66-B
HP3-TO3-B
HP3-420-B
Universal
TO-126
5.0
5.0
4.0
3.7
HP3-TO126-U
HP3-TO127-U
HP3-TO126-CB
HP3-TO127-CB
HP3-TO126-B
HP3-TO127-B
TO-127/220
2 ea. TO-127/220
HP3-TO127-4U HP3-TO127-4CB HP3-TO127-4B
4 ea. TO-127/220
HP3-319-U
HP3-319-CB
HP3-319-B
*Natural convection, case-ambient mounted on G10 board
21
CTS
®
BOARD-MOUNTED HEAT SINKS
PC Series
Part Number
Comm’l Black
PC1-1CB
PC1-3CB
PC4-1CB
PC4-3CB
Semiconductor
“A”
Case Type
*Ø °C/W
Unplated
Military Black
Dim.
TO-126/127/220
TO-126/127/220
TO-126/127/220
TO-126/127/220
27.3
27.3
22.0
22.0
PC1-1U
PC1-3U
PC4-1U
PC4-3U
PC1-1B
PC1-3B
PC4-1B
PC4-3B
.38
.38
.75
.75
PA Series
Part Number
Comm’l Black
Semiconductor
Case Type
“A”
*Ø °C/W
Unplated
Military Black
Dim.
TO-126/127/220
28.8
PA1-1U
PA1-1CB
PA1-1B
.50
TO-126/127/220
30.0
PA2-1U
PA2-1CB
PA2-1B
.31
PB Series
Part Number
Comm’l Black
Semiconductor
Case Type
“A”
*Ø °C/W
Unplated
Military Black
Dim.
TO-126/127/220
22.1
PB1-1U
PB1-2U
PB2-1U
PB2-2U
PB1-1CB
PB1-2CB
PB2-1CB
PB1-1B
PB1-2B
PB2-1B
.50
.50
.31
.31
Dual
—
TO-126/127/220
TO-126/127/220
25.0
—
CB
B
PB2-2
PB2-2
PSC2 Series
Part Number
Comm’l Black
PSC2-1CB
PSC2-2CB
PSC2-3CB
PSC2-4CB
PSC2-5CB
Semiconductor
Case Type
*Ø °C/W
Unplated
Military Black
TO-202
TO-220
Mota. 152
TO-126
TO-127
42.9
41.7
46.9
45.5
37.5
PSC2-1U
PSC2-2U
PSC2-3U
PSC2-4U
PSC2-5U
PSC2-1B
PSC2-2B
PSC2-3B
PSC2-4B
PSC2-5B
VERTICALLY MOUNTED HEAT SINKS WITH BOARD-MOUNTED TABS
Vertical Tab Mounted Heat Sinks
Part Number
Comm’l Black
PB1-36CB
PSB2-1CB
PSD1-1CB
PSD1-2CB
Fig. Semiconductor
Black Anodize With
Solder Tabs
#
Case Type
*Ø °C/W
Unplated
Military Black
Fig. 1
1
2
3
TO-126/127/220
TO-126/127/220
TO-202
20.0
25.9
17.6
14.4
PB1-36U
PSB2-1U
PSD1-1U
PSD1-2U
PB1-36B
PSB2-1B
PSD1-1B
PSD1-2B
PB1ST-69CB
—
—
—
TO-126/127/220
Fig. 2
Fig. 3
Fig. 1
Fig. 2
Fig. 3
PSE1 Series
Part Number
Semiconductor
Case Type
*Ø °C/W
Unplated
Comm’l Black
Military Black
Mota. 152
TO-126/127/220
TO-202
17.1
15.0
17.4
PSE1-1U
PSE1-2U
PSE1-3U
PSE1-1CB
PSE1-2CB
PSE1-3CB
PSE1-1B
PSE1-2B
PSE1-3B
*Natural convection, case-ambient mounted on G10 board
22
CTS
®
BOARD AND VERTICALLY MOUNTED HEAT SINKS
7-192
7-195-1, -2
7-363 & 7-364
7-370
23
CTS Electronic Components - California
®
CTS
413 North Moss Street • Burbank, California 91502
TEL: (818) 842-7277 • FAX: (818) 848-8872 • www.ctscorp.com
ELECTRONIC COMPONENTS
© Copyright CTS Corp. 2007
Designed by Sandcastle Advertising, W. Los Angeles, CA
相关型号:
©2020 ICPDF网 联系我们和版权申明