EB-D-16.80M [CTS]
Oscillator, 10MHz Min, 20MHz Max, 16.8MHz Nom,;型号: | EB-D-16.80M |
厂家: | CTS |
描述: | Oscillator, 10MHz Min, 20MHz Max, 16.8MHz Nom, |
文件: | 总2页 (文件大小:50K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SURFACE MOUNT
EB-A
EB-B
EB-C
EB-D
ELECTRONICS
Temperature Compensated
Crystal Oscillator
EB Models, 2.0-2.5 PPM
TCXO
OSCILLATORS
SMD TCXO, 3.0V
10 MHz to 20 MHz
FIXED FREQUENCY
These surface mount oscillators are available in thirteen stan-
dard frequencies
SMD EB Models, TCXOs, 3.0 Volts
VOLTAGE CONTROL OF FREQUENCY
±5 ppm min is user-controlled by external voltage
MF Electronics EB (SMD) TCXOs are ideal for high volume,
low cost applications. With miniature 7 x 5 x 2 mm size,
these oscillators use tiny precise crystals operating at stan-
dard frequencies from 10 to 20 MHz. Thirteen common fre-
quencies are available. They have electronic frequency con-
trol of ±5ppm, allowing the frequency to be set to, or to
track a reference frequency.
STABILITY
±2.0 or ±2.5 ppm
TEMPERATURE
-30 to +80ºC or -20 to +70ºC
AGING
Less than 1 ppm per year
Operating at 3.0 volts and with current not exceeding 2
mA, they are ideal for battery operated equipment. This
group of models include the 10 MHz and 20 MHz frequen-
cies which may be used for counting and timing applica-
tions.
INPUT VOLTAGE
3.0 volts is standard. 5.0 volts may be had on special order
7.0 ±0.2
4
3
They are furnished in tape and reel, for automated produc-
tion and come with large gold or solder plated pads. Side-
castellations accept solder flow, and facilitate automated
solder joint inspection.
5.0 ±0.2
2
1
FEATURES
2.0 max
•
•
•
•
•
•
Low power, low voltage, small size
Ideal for battery powered equipment
Recommended for portable, mobile, wireless equipment
Choice of stability: ±2.5 or ±2.0 ppm
Choice of 2 temperature ranges
5.08
1
2
Pads within this
area are not
to be used
Guaranteed start-up with ramping DC Supply
1.0
3
4
1.4
CONNECTIONS
Pad 1.
All dimensions in mm.
Electronic Frequency Control
Pad 2.
Pad 3.
Pad 4.
Ground
Output
Vdd
TCXO EB Models
1.6
Sq
4.2
5.2
Land Pattern
ELECTRONICS
10 Commerce Drive, New Rochelle, NY10801 • 914-712-2200 • Fax: 914-576-6204 • http://www.mfelectronics.com • email:sales@mfelectronics.com
SURFACE MOUNT
EB-A
EB-B
ELECTRONICS
TCXO Oscillator
EB Models
EB-C
EB-D
3.0 V, 2.0-2.5 ppm
10 MHz to 20 MHz
SPECIFICATIONS
Temperature — All models
MARKING SPECIFICATION
The format for the marking is:
Operating
-20 to +70°C or -30 to +80°C
Code
Week
(2)
Date
Year
(1)
“EBA”
Model
MF
Electronics
Standard Frequencies
10.0, 12.6, 12.8, 13.0, 14.4,
14.85, 15.36, 16.8, 19.2, 19.44,
19.68, 19.8, 20.0MHz
M F - E B A 1 S
1 9 . 6 8
Output Levels
Phase Noise
0.8 volts p-p, min, clipped sine wave
-120 dBc/Hz at 1KHz offset, typ
•
Pad 1
Frequency is 19.68 MHz
NOTES
Frequency Stability
vs Temperature
(1) Number in date code is year. In example, “1” is 2001.
(2) Letter in date code is one two-week period. Year is divided
into 26 two-week intervals. Each two-week interval is repre-
sented by one letter of the alphabet, in sequence.
±2.0 or 2.5 ppm
Aging
±1 ppm/year max, at 25ºC
10 pf in parallel with 10Kohms
±5 ppm for 1.5 ±1.0 V
Load
Frequency Control
MIN.
TYP
MAX
UNITS
Input Voltage, Vdd
2.85
3.0
3.15
volts
230
200
Input Current
10 to 15 MHz
15 to 20 MHz
160
140
1.5
2.0
ma
ma
100
Temperature
of pad (°C)
MODEL OPTIONS
30
50 to
Frequency
20 30 to 20
sec 50 sec sec
sec
min.
100 sec
Model
Temperature
-20 to +70ºC
-30 to +80ºC
Stability
2.5 ppm
2.0 ppm
2.5 ppm
2.0 ppm
Time (sec)
min.
min.
EB-A
EB-B
EB-C
EB-D
Recommended Reflow Soldering Profile
Note: Ultrasonic cleaning or aqueous cleaning must not be used
Table I
HOW TO ORDER
For Part Number,use model number with letter option, and
add frequency in MHz, for example:
EB-x -1 9 .6 8 M
“19.68 M”
is frequency
in MHz
“EB”
is model
type
Insert model
letter option
from Table I
ELECTRONICS
10 Commerce Drive, New Rochelle, NY10801 • 914-712-2200 • Fax: 914-576-6204 • http://www.mfelectronics.com • email:sales@mfelectronics.com
相关型号:
©2020 ICPDF网 联系我们和版权申明