H2341-1.000MG [CTS]

Oscillator,;
H2341-1.000MG
型号: H2341-1.000MG
厂家: CTS    CTS
描述:

Oscillator,

文件: 总3页 (文件大小:88K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
FULL SIZE D.I.L.  
M package  
M2306  
M2321, M2322  
M2331, M2332  
M2341, M2342  
HALF SIZE D.I.L.  
H package  
H2306  
H2321,H2322  
H2331, H2332  
H2341, H2342  
VOLTAGE CONTROLLED  
CRYSTAL OSCILLATORS  
HCMOS/TTL 3.3V  
Thru-Hole / Gull Wing  
Commercial: 0º to 70ºC  
1 MHz to 150 MHz  
GUARANTEED CAPTURE RANGE/ABSOLUTE PULL RANGE  
Description  
Guaranteed Capture Range (GCR) and Absolute Pull Range (APR) are terms often used interchangeably.  
MF's Guaranteed Capture Range (GCR) is defined as the minimum guaranteed frequency deviation or  
These thru-hole VCXOs generate a 3.3  
volt HCMOS/TTL frequency output which  
is controlled ("pulled") by an input volt-  
age. MF Electronics' VCXO specification  
defines not only the end-point frequency/  
voltage parameters, but also the center  
voltage at which the nominal frequency  
is acheived.  
"pull" (in ppm) around the nominal frequency, with all effects of temperature, variations in V  
taken into account. This amount of absolute frequency deviation is available under all operating conditions  
for modulation or capturing other signals. No additional frequency capture allowances are necessary.  
and load  
DD  
FEATURES  
Excellent incrememtal and best-straight-line linearity  
Start-up time is less than 5ms  
Each unit is ATE-tested to guarantee full compliance with all electrical specifications  
TYPICAL APPLICATIONS  
Phase locked loops and data acquisition projects, including:  
– xDSL customer premise equipment  
– Cable modems  
CONNECTIONS  
ATM/SONET/SDH  
Full Size  
Half Size  
Pin 1. Control Voltage, VC Control Voltage, VC  
Pin 4.  
Pin 5.  
Ground & Case  
Output  
Pin 7. Ground & Case  
Pin 8. Output  
Pin14. +3.3V, VDD  
+3.3V, VDD  
DOT  
DENOTES  
PIN 1  
DOT  
DENOTES  
PIN 1  
DOT  
DENOTES  
PIN 1  
DOT  
DENOTES  
PIN 1  
.800 – .005  
.060 TYP  
.800 .005  
.52 MAX  
SQUARE  
.52 MAX  
SQUARE  
.200 MAX  
.215 MAX  
.200 MAX  
.270 MAX  
.2 MAX  
.160  
.2  
MAX  
.200 MAX  
.070  
.008/025 .15 MIN  
.018 – .001  
Pin 1  
.018 .001  
.018  
.300 – .005  
.018  
.300  
.400  
.300  
+.004  
.600 .005  
.600 – .005  
.100 – .005  
Pin 7  
Pin 1  
Pin 7  
4
5
8
1
4
5
.520 .005  
.300 –. 005  
.300  
+.004  
.500 – .005  
.300  
.300 . 005  
.150  
8
1
.250 MAX  
Pin 14  
Pin 14  
Pin 8  
Pin 8  
Glass Insulators (4)  
GLASS INSULATORS (4)  
GLASS INSULATORS (4)  
on .48 x .18 ctrs.  
“M” Package  
“H” Package  
“M” Package  
with Gull Wing  
“H” Package  
with Gull Wing  
ELECTRONICS  
10 Commerce Dr  
• New Rochelle NY 10801  
+
International Sales: 1.914-712-2200 USA Sales: +1.800.331.1236 Fax: 914.712.2290 www.mfelectronics.com email:sales@mfelectronics.com  
1 of 3  
FULL SIZE D.I.L.  
M package  
M2306  
M2321, M2322  
M2331, M2332  
M2341, M2342  
HALF SIZE D.I.L.  
H package  
H2306  
H2321,H2322  
H2331, H2332  
H2341, H2342  
VOLTAGE CONTROLLED  
CRYSTAL OSCILLATORS  
HCMOS/TTL 3.3V  
Thru-Hole / Gull Wing  
Commercial: 0º to 70ºC  
1 MHz to 150 MHz  
DESCRIPTIONS  
Center Frequency is Between Two Voltages  
Guaranteed  
Capture  
Range  
(ppm)  
Control  
Center  
Frequency  
Stability  
(ppm)  
M2306, H2306  
±150 ppm, min. deviation when using  
0 to 3 control-voltage  
Control  
Voltage  
(Volts)  
Frequency  
Deviation  
(ppm)  
Voltage  
at Center  
Frequency  
MODEL  
M2321, H2321  
M2322, H2322  
M2331, H2331  
M2332, H2332  
M2341, H2341  
M2342, H2342  
±75 ppm capture when using using 0.5 to 2.5V  
control-voltage and 1.5V center with ±50 ppm stability  
± 30, typ  
2306  
0 to 3.0  
± 150 min  
± 150  
±100 ppm capture when using using 0.5 to 2.5V  
± 50, max  
control-voltage and 1.5V center with ±50 ppm stability  
±75 ppm capture when using using 0.5 to 2.5V  
Center Frequency is at 1.5V with ±50 ppm stability  
control-voltage and 1.5V center with ±25 ppm stability  
Guaranteed  
Capture  
Range  
Control  
Voltage  
at Center  
Frequency  
Center  
Frequency  
Stability  
(ppm)  
±100 ppm capture when using using 0.5 to 2.5V  
Control  
Voltage  
(Volts)  
Frequency  
Deviation  
(ppm)  
control-voltage and 1.5V center with ±25 ppm stability  
MODEL  
(ppm)  
±75 ppm capture when using using 0.5 to 2.5V  
2321  
2322  
0.5 to 2.5  
0.5 to 2.5  
± 75 to 150  
± 75  
1.5  
1.5  
± 30, typ  
control-voltage and 1.5V center with ±20 ppm stability  
± 100 to 200  
± 100  
± 50, max  
±100 ppm capture when using using 0.5 to 2.5V  
control-voltage and 1.5V center with ±20 ppm stability  
Center Frequency is at 1.5V with ±25 ppm stability  
Guaranteed  
Capture  
Range  
Control  
Voltage  
at Center  
Frequency  
Center  
Frequency  
Stability  
(ppm)  
FREQUENCY STABILITY  
Control  
Voltage  
(Volts)  
Frequency  
Deviation  
(ppm)  
Frequency stability vs. Temperature (0 to 70°C) is typically better than  
±20 ppm. Since the deviation of each oscillator is tested and guaranteed  
over the whole operating temperature range, it is not necessary to make  
additional capture allowances. All oscillators will capture frequencies with  
the full minimum values of the deviation under all conditions.  
MODEL  
(ppm)  
2331  
2332  
0.5 to 2.5  
0.5 to 2.5  
± 75 to 150  
± 75  
1.5  
1.5  
± 20, typ  
± 100 to 200  
± 100  
± 25, max  
Center Frequency is at 1.5V with ±20 ppm stability  
QUALITY  
Each VCXO is computer-tested at three temperatures to guarantee full  
compliance to the specification.  
Guaranteed  
Capture  
Range  
Control  
Voltage  
at Center  
Frequency  
Center  
Frequency  
Stability  
(ppm)  
Control  
Voltage  
(Volts)  
Frequency  
Deviation  
(ppm)  
MODEL  
(ppm)  
150  
100  
50  
2341  
2342  
0.5 to 2.5  
0.5 to 2.5  
± 75 to 150  
± 75  
1.5  
1.5  
± 15, typ  
± 100 to 200  
± 100  
± 20, max  
PIN 1.  
CONTROL VOLTAGE  
0
FET PROBE  
V
DD  
Y-OUTPUT  
350 MHz  
SCOPE  
+3.3V  
GND  
MA  
-50  
-100  
-150  
1
14  
(8)  
Power  
Supply  
(1)  
LOAD  
COUNTER  
7
8
(4)  
(5)  
Half Size connections shown in (  
)
1.0  
1.5  
2.0  
2.5  
0.5  
To adapt Fet probe to receptacle  
use Tektronix Part #103-0164-00  
To connect output to scope use  
use Tektronix Part #131-0258-00 (receptacle)  
Control Voltage, V  
c
ALL OSCILLATORS HAVE INTERNAL BYPASS CAPACITORS  
Fig. 1 Frequency vs. Control Voltage  
for M2331-16M  
TEST CIRCUIT  
ELECTRONICS  
10 Commerce Dr  
• New Rochelle NY 10801  
+
International Sales: 1.914-712-2200 USA Sales: +1.800.331.1236 Fax: 914.712.2290 www.mfelectronics.com email:sales@mfelectronics.com  
2 of 3  
FULL SIZE D.I.L.  
M package  
M2306  
M2321, M2322  
M2331, M2332  
M2341, M2342  
HALF SIZE D.I.L.  
H package  
H2306  
H2321,H2322  
H2331, H2332  
H2341, H2342  
VOLTAGE CONTROLLED  
CRYSTAL OSCILLATORS  
HCMOS/TTL 3.3V  
Thru-Hole / Gull Wing  
Commercial: 0º to 70ºC  
1 MHz to 150 MHz  
ELECTRICAL SPECIFICATIONS  
ENVIRONMENTAL SPECIFICATIONS  
Frequency Range 1 MHz to 150 MHz  
Temperature  
Operating  
Storage  
0º to 70°C  
-55º to +125°C  
Frequency Stability Includes calibration at 25°C, operating temperature,  
change of input voltage, change of load, shock and  
vibration.  
Temperature Cycle – Not to exceed ±5 ppm change when exposed to 2  
hours maximum at each temperature from 0 to 120°C, with 25°C reference  
Center Frequency Range  
VC = 1.5V  
1 MHz to 150 MHz  
Shock – 1000 Gs, 0.35 ms, 1/2 sine wave, 3 shocks in each plane  
Vibration – 10-2000 Hz of .06" d.a. or 20 Gs, whichever is less  
Humidity – Resistant to 85° R.H. at 85°C  
Frequency Stability  
VC = 1.5V  
±25 or ±50 ppm, max.  
as shown in model specification  
MIN  
TYP  
MAX  
UNITS  
Input Voltage, VDD  
3.0  
3.3  
3.6  
volts  
MECHANICAL SPECIFICATIONS  
Input Current  
1 KHz to 10 MHz  
10.1 to 25 MHz  
25.1 to 50 MHz  
50.1 to 75 MHz  
75.1 to 125 MHz  
Gross Leak – Each unit checked in 125°C fluorocarbon  
8
15  
20  
25  
30  
14  
20  
30  
35  
40  
mA  
mA  
mA  
mA  
mA  
-8  
Fine Leak – Mass spectrometer leak rate less than 2 X 10 atmos,  
cc/sec of helium  
Pins – Kovar, nickel plated with 60/40 solder coat  
Bend Test – Will withstand two bends of 90° from reference  
Header – Steel, with nickel plate  
Output Levels  
0Level, sinking 16 mA  
1Level, sourcing 8 mA  
0.4  
volts  
volts  
VDD-.4  
Case – Stainless steel, type 304  
Rise and Fall Times  
CMOS, 15 pf,  
Marking – Permanent black epoxy ink or laser marked  
Resistance to Solvents – MIL STD 202, Method 215  
20 to 80% (<60 MHz)  
CMOS, 30 pf,  
20 to 80% (<60 MHz)  
CMOS, 50 pf,  
3.0  
4.0  
6.0  
4
5
8
ns  
ns  
ns  
20 to 80% (<60 MHz)  
CMOS, 15 pf,  
20 to 80% (>60 MHz)  
CMOS, 30 pf,  
20 to 80% (>60 MHz)  
2.0  
3.0  
2.5  
4.5  
ns  
ns  
Symmetry  
CMOS, @ 50% VDD  
48/52  
45/55  
percent  
Aging  
First year  
After first year  
3
1
ppm  
ppm/yr  
Input Impedance  
Control Voltage  
15  
1000  
Kohms  
KHz  
Control Voltage Bandw idth  
15  
150  
HOW TO ORDER  
For Part Number, put package type before model number,  
and add frequency in MHz, for example:  
M 2 3 3 1-1 6 .3 6 4 M  
Fig. 2. H2321-19.44M  
with 33 pf load  
“M” is full size DIL  
“H” is half size DIL  
2331”  
is model  
type  
16.364 M”  
frequency for straight leads  
in MHz  
Leave blank  
Add Gfor  
gullwing  
Unless customer-specific terms and conditions  
are signed by an officer of MF Electronics, the  
sale of this and all MF Electronics products are  
subject to terms and conditions set forth at  
www.mfelectronics.com/terms  
SS#  
Rev.  
A
M2306  
ELECTRONICS  
10 Commerce Dr  
• New Rochelle NY 10801  
+
International Sales: 1.914-712-2200 USA Sales: +1.800.331.1236 Fax: 914.712.2290 www.mfelectronics.com email:sales@mfelectronics.com  
3 of 3  

相关型号:

SI9130DB

5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 202
-
VISHAY

SI9135LG-T1

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 202
-
VISHAY

SI9135LG-T1-E3

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 202
-
VISHAY

SI9135_11

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 202
-
VISHAY

SI9136_11

Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 202
-
VISHAY

SI9130CG-T1-E3

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 202
-
VISHAY

SI9130LG-T1-E3

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 202
-
VISHAY

SI9130_11

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 202
-
VISHAY

SI9137

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 202
-
VISHAY

SI9137DB

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 202
-
VISHAY