M2644-210.00MG [CTS]
Oscillator, 10MHz Min, 210MHz Max, 210MHz Nom, ECL,;型号: | M2644-210.00MG |
厂家: | CTS |
描述: | Oscillator, 10MHz Min, 210MHz Max, 210MHz Nom, ECL, |
文件: | 总3页 (文件大小:58K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
FULL SIZE D.I.L
M package
CRYSTAL
OSCILLATORS
10KH ECL -5.2V
M1600, M1636,
M1644, M1645,
M1800, M1836,
M1844, M1845,
M1850, M2600,
M2636, M2644,
M2645, M2800,
M2836, M2844,
M2845
Thru-Hole / Gull Wing
Commercial: 0º to 70ºC
10 MHz to 210 MHz
The MF ECL oscillators are available in a variety of common configu-
rations. Models are full size in 10 KH logic, with and without comple-
mentary outputs. Frequencies are from 10 MHz to 210 MHz. Frequency
tolerances from 100 ppm to 25 ppm include all effects of voltage,
load and aging.
FEATURES
• DIL full size
• Single or dual complementary outputs
• Start up time less than 5 ms.
Description
MF Electronics’ high speed clock oscillators
for digital and communications applica-
tions are based on 5V 10KH ECL logic
and are available in full size (M) DIL thru-
hole/gull wing packages. Designs in ECL
10KH logic develop 10 MHz to 210 MHz
output, and are available with 45/55
symmetry. They can be provided with
dual complementary output at frequen-
cies through 210 MHz. Frequency stabili-
ty extends from the high end at ±25 ppm
to ±100 ppm. For superior performance,
see our model 2900s using ECLPS logic.
• Stability options from .01% (100 ppm) to .0025% (25 ppm)
• Guaranteed start-up with ramping DC Supply
• Terminating resistor may be internal – consult factory
ECL OSCILLATORS
VDD on 14
and VEE on 7
–5 Volt Power on Pin 14
–5 Volt Power on Pin 7
Single
Output
Complementary
Output
Single
Output
Complementary
Output
Single
Output
Frequency
Stability
* Guaranteed Superior
Symmetry 45/55
** For M1850 only, pin 1 only is
connected to case.
M1600
M1636*
M1644
M1645
M2600
M2636*
M2644
M2645
M1800
M1836*
M1844
M1845
M2800
M2836*
M2844
M2845
±100 ppm
±100 ppm
±25 ppm
±50 ppm
M1850**
Pin 14 is VDD and pin 7 is VEE
DOT
DENOTES
PIN 1
DOT
DENOTES
PIN 1
.800 – .005
.800 – .005
.200 MAX
.200 MAX
.270 MAX
.215 MAX
.060 TYP
.300 – .005
.008/025 .15 MIN
.018 – .001
Pin 1
.018 – .001
Pin 1
.400
.600 – .005
.600 – .005
.100 – .005
Pin 7
Pin 7
.520 – .005
.300 –. 005
.300 –. 005
.500 – .005
.150
.250 MAX
Pin 14
Pin 14
Pin 8
Pin 8
GLASS INSULATORS (4)
GLASS INSULATORS (4)
on .48 x .18 ctrs.
“M” Package
“M” Package
with Gull Wing
ELECTRONICS
10 Commerce Dr
• New Rochelle NY 10801
+
International Sales: 1.914-712-2200 • USA Sales: +1.800.331.1236 • Fax: 914.712.2290 • www.mfelectronics.com • email:sales@mfelectronics.com
1 of 3
FULL SIZE D.I.L
M package
CRYSTAL OSCILLATORS
10KH ECL -5.2V
Thru-Hole / Gull Wing
Commercial: 0º to 70ºC
10 MHz to 210 MHz
M1600, M1636,
M1644, M1645,
M1800, M1836,
M1844, M1845,
M1850, M2600,
M2636, M2644,
M2645, M2800,
M2836, M2844,
M2845
TERMINATIONS
ELECTRICAL SPECIFICATIONS
Frequency Range 10 MHz to 210 MHz
All ECL oscillators must be terminated. If required, internal terminating
resistors of any specified value may be factory-supplied
Frequency Stability Includes calibration at 25°C, operating temperature,
change of input voltage, change of load, shock and
vibration.
AUTOMATED TESTING (ATE)
Automated testing can effectively be performed using the M1900, since
this model may be turned-off and “0”'d, allowing an ECL test frequency
to be inserted on the output node.
MIN
–4.75
TYP
–5.2
MAX
–5.45
UNITS
volts
Input Voltage
Input Current
45
60
mA
Output Levels
“0” Level
25°C
–1.95
–1.95
–1.63
–1.60
volts
volts
-5.2V, V
EE
75°
“1” Level
25°C
COMPLEMENTARY
OUTPUT
ON
–0.98
–0.92
–0.81
–0.735
volts
volts
1
14
8
M1600
&
75°
M2600
Rise and Fall Times
M2600
(20 to 80%)
1.0
2.0
ns
OUTPUT
7
Symmetry
CASE
All units, except ‘36 Models
All ‘36 Models
45/55
48/52
40/60
45/55
percent
percent
Fig. 1
Aging
First year
After first year
3-5
1
ppm
ppm/yr
CASE
COMPLEMENTARY
OUTPUT
ON
M2800
1
14
ENVIRONMENTAL SPECIFICATIONS
Temperature
M1800,
&
M2800
Operating
Storage
0º to 70°C, case temperature
-55º to +125°C
OUTPUT
7
8
Shock – 1000 Gs, 0.35 ms, 1/2 sine wave, 3 shocks in each plane
Vibration – 10-2000 Hz of .06" d.a. or 20 Gs, whichever is less
Humidity – Resistant to 85° R.H. at 85°C
-5.2V, V
EE
Fig. 2
VDD
MECHANICAL SPECIFICATIONS
CASE
CASE
GROUND
Leak – MIL STD 883, Method 1014, condition A1
Pins – Kovar, 7 microinch gold over nickel
Bend Test – Will withstand two bends of 90° from reference
Header – Steel, 7 microinch gold over nickel
Case – Stainless steel, type 304
1
14
M1850
OUTPUT
8
V
EE
7
Fig. 3
Marking – Epoxy ink or laser engraved
Resistance to Solvents – MIL STD 202, Method 215
Note: Outputs must be properly terminated
ELECTRONICS
10 Commerce Dr
• New Rochelle NY 10801
+
International Sales: 1.914-712-2200 • USA Sales: +1.800.331.1236 • Fax: 914.712.2290 • www.mfelectronics.com • email:sales@mfelectronics.com
2 of 3
FULL SIZE D.I.L
M package
CRYSTAL OSCILLATORS
10KH ECL -5.2V
Thru-Hole / Gull Wing
Commercial: 0º to 70ºC
10 MHz to 210 MHz
M1600, M1636,
M1644, M1645,
M1800, M1836,
M1844, M1845,
M1850, M2600,
M2636, M2644,
M2645, M2800,
M2836, M2844,
M2845
CONNECTIONS
Models
M1600, M2600
Models
M1800, M2800
(except ‘1850)
Model
M1850
PINS
Not used in Single Output or Used for Complementary Output
(same termination as Pin 8.)
1.
7.
Tied to Case
VEE (-Volts)
Electrical Ground
–5.2 V (VEE
)
and Case
Output requires
termination of
270 ohms to Pin 14
or 50 ohms to –2V
Output requires
termination of
270 ohms to Pin 7
or 50 ohms to –2V
Output requires
termination of
270 ohms to Pin 7
or 50 ohms to (VEE+3V)
8.
Electrical Ground
and Case
14.
–5.2V, VEE
VDD(+Volts)
CASE
Tied to Pin 7.
Tied to Pin 14
Tied to Pin 1.
COMPLEMENTARY OUTPUT
FOR M2600
-5.2V,
50Ω
Y-OUTPUT
350 MHz
SCOPE
V
EE
-2V
MA
1
14
Power
Supply
IMF
M1600’s
M2600’s
COAX
COUNTER
7
8
GND
COMPLEMENTARY OUTPUT
FOR M2800
To connect output to scope use
Tektronix Part #131-0258-00
(receptacle)
CASE
To adapt Fet probe to receptacle
use Tektronix Part #103-0164-00
50Ω
-2V
Y-OUTPUT
350 MHz
SCOPE
1
7
14
8
TEST CIRCUIT FOR M1600’s
Power
IMF
M1800’s
&
M2800’s
COAX
M2600’s HAVE ADDITIONAL OUTPUT ON PIN 1.
Supply
-5.2V, V
EE
COUNTER
To connect output to scope use
Tektronix Part #131-0258-00
(receptacle)
To adapt Fet probe to receptacle
use Tektronix Part #103-0164-00
50Ω
Y-OUTPUT
350 MHz
SCOPE
CASE
TEST CIRCUIT FOR M1800’s
M2800’s HAVE ADDITIONAL OUTPUT ON PIN 1.
VDD (+Volts)
(VEE +3V)
1
7
14
Power
Supply
IMF
M1850’s
COAX
VEE (-Volts)
COUNTER
8
To connect output to scope use
Tektronix Part #131-0258-00
(receptacle)
To adapt Fet probe to receptacle
use Tektronix Part #103-0164-00
TEST CIRCUIT FOR M1850’s
HOW TO ORDER
For Part Number, put package type before model number,
and add frequency in MHz, for example:
M 1 8 5 0- 5 1 .8 4 M
“M” is full size DIL
“1500”
is model
type
“66.666 M”
frequency
in MHz
Leave blank
for straight leads
Add “G” for
gullwing
Unless customer-specific terms and conditions
are signed by an officer of MF Electronics, the
sale of this and all MF Electronics products are
subject to terms and conditions set forth at
www.mfelectronics.com/terms
SS#
Rev.
A
M1600
ELECTRONICS
10 Commerce Dr
• New Rochelle NY 10801
+
International Sales: 1.914-712-2200 • USA Sales: +1.800.331.1236 • Fax: 914.712.2290 • www.mfelectronics.com • email:sales@mfelectronics.com
3 of 3
相关型号:
M264FAN01.5000MHZ
HCMOS/TTL Output Clock Oscillator, 1.5MHz Min, 135MHz Max, 1.5MHz Nom, ROHS COMPLIANT, LEADLESS PACKAGE-4
MTRONPTI
M264FAN1.0000MHZ
HCMOS/TTL Output Clock Oscillator, 1MHz Nom, ROHS COMPLIANT, LEADLESS, CERAMIC PACKAGE-4
MTRONPTI
M264FAN135.0000MHZ
HCMOS/TTL Output Clock Oscillator, 1.5MHz Min, 135MHz Max, 135MHz Nom, ROHS COMPLIANT, LEADLESS, CERAMIC PACKAGE-4
MTRONPTI
M264FAN8.0000MHZ
HCMOS/TTL Output Clock Oscillator, 8MHz Nom, ROHS COMPLIANT, LEADLESS, CERAMIC PACKAGE-4
MTRONPTI
M264FANFREQ
HCMOS/TTL Output Clock Oscillator, 1.5MHz Min, 135MHz Max, ROHS COMPLIANT, LCC-4
MTRONPTI
©2020 ICPDF网 联系我们和版权申明