M6306-1.00M [CTS]
Oscillator,;
| 型号： | M6306-1.00M |
| 厂家： | 
CTS |
| 描述： | Oscillator, |
| 文件： | 总4页 (文件大小：105K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
FULL SIZE D.I.L.
M package
M6306
VOLTAGE CONTROLLED
CRYSTAL OSCILLATORS
HCMOS/TTL 5V
Thru-Hole
Hi Reliability: -55º to +125ºC
TRISTATE, 1 MHz to 35 MHz
MF Electronics oscillators are not
compliant with MIL-PRF-55310
GUARANTEED CAPTURE RANGE/ABSOLUTE PULL RANGE
Description
Guaranteed Capture Range (GCR) and Absolute Pull Range (APR) are terms often used interchangeably.
MF's Guaranteed Capture Range (GCR) is defined as the minimum guaranteed frequency deviation or
MF Electronics now offers VCXOs
manufactured to Hi-Rel standards, for
applications that are subjected to the
most stringent environmental conditions.
These VCXOs guarantee ±50 ppm
capture over -55º to +125ºC. These
thru-hole VCXOs generate a 5 volt
HCMOS/TTL frequency output which is
controlled ("pulled") by an input voltage.
These VCXOs offer tristate operation,
facilitating diagnostic ATE testing, or
user's choice of clock speed under
software control.
"pull" (in ppm) around the nominal frequency, with all effects of temperature, variations in V
taken into account. This amount of absolute frequency deviation is available under all operating conditions
for modulation or capturing other signals. No additional frequency capture allowances are necessary.
and load
DD
FEATURES
• 168 hour Class B burn-in and extensive environmental testing for best performance in rugged field
environments
• Crystal angle controlled to ±1 minute for excellent temperature stability from -55 to +125ºC
• Each unit is ATE-tested to guarantee full compliance with all electrical specifications
• Guaranteed Capture Range of ±50 ppm
• Excellent incremental and best-straight-line linearity
• Start-up time is less than 10ms
• Over-control voltage up to 7V allows for 20% control voltage overshoot
TYPICAL APPLICATIONS
• Aircraft and aerospace
• Transportation equipment
• Phase locked loops and data acquisition projects that may be exposed to the most severe
environmental conditions, including:
– xDSL customer premise equipment
– Cable modems
– ATM/SONET/SDH
DOT
DENOTES
PIN 1
Guaranteed
Capture
Control Voltage
at Center
Center
Frequency
Control
Frequency
MODEL Voltage (Volts) Deviation (ppm)
Range (ppm)
Frequency
Stability (ppm)
.20 MAX
6306
0 to 5.0
± 50 min
± 50
2.5V
± 50 typ, ±75 max
.20 MIN.
.018 – .001
100 TYP (NON
Pin 1
DESCRIPTION
M6306
ACCUMULATIVE)
±50 ppm, min. deviation when using 0 to 5.0V control-voltage
and 2.5v center with ±75 ppm stability
2
5
7
8
.300 – .005
.500 – .005
150
14
9
CONNECTIONS
Full Size
.300
– .005
44 MAX
.800 – .005
Pin 1. Not used
Pin 2. Control Voltage, VC
Pin 5. Tristate
“M-1” Package
Pin 7. Ground & Case
Pin 8. Output
Pin 9. Not used
Pin14. +5V, VDD
ELECTRONICS
10 Commerce Dr
• New Rochelle NY 10801
+
International Sales: 1.914-712-2200 • USA Sales: +1.800.331.1236 • Fax: 914.712.2290 • www.mfelectronics.com • email:sales@mfelectronics.com
1 of 4
FULL SIZE D.I.L.
M package
M6306
VOLTAGE CONTROLLED
CRYSTAL OSCILLATORS
HCMOS/TTL 5V
Thru-Hole
Hi Reliability: -55º to +125ºC
TRISTATE, 1 MHz to 35 MHz
ELECTRICAL SPECIFICATIONS
MECHANICAL SPECIFICATIONS
Frequency Range 1 MHz to 35 MHz
Gross Leak – Each unit checked in 125°C fluorocarbon
Case – Stainless Steel
Frequency Stability Includes calibration at 25°C, operating temperature,
change of input voltage, change of load, shock and
vibration.
Marking – MF part number, date code, serial number and description
Marking will withstand MIL-STD 202, Method 215
MIN
TYP
MAX
UNITS
Optional Marking – Customer part number if required
Leads – Kovar, nickel plated, gold flash
Input Voltage, VDD
4.5
5.0
5.5
volts
Input Current
1 KHz to 10 MHz
10.1 to 25 MHz
25.1 to 50 MHz
50.1 to 75 MHz
75.1 to 125 MHz
8
15
20
25
30
14
20
30
35
40
mA
mA
mA
mA
mA
Shock – MIL-STD 883, Method 2002, Test Condition B
Vibration – MIL-STD 883, Method 2007, Test Condition A
Output Levels
“0” Level, sinking 16 mA
“1” Level, sourcing 8 mA
0.4
volts
volts
VDD-.4
Rise and Fall Times
CMOS, 15 pf,
20 to 80% (<60 MHz)
CMOS, 30 pf,
20 to 80% (<60 MHz)
CMOS, 50 pf,
20 to 80% (<60 MHz)
CMOS, 15 pf,
20 to 80% (>60 MHz)
CMOS, 30 pf,
3.0
4.0
6.0
2.0
3.0
4
5
ns
ns
ns
ns
ns
TRISTATE FUNCTION
Pin 5
Pin 8
Floating or 4.0V min.
0.4V max.
Clock Output
8
Output is tristated
2.5
4.5
20 to 80% (>60 MHz)
Symmetry
CMOS, @ 50% VDD
48/52
45/55
percent
Aging
First year
After first year
3
1
ppm
ppm/yr
PIN 1.
CONTROL VOLTAGE
Control Voltage
Modulation Bandw idth
Jitter
0
7.0
volts
KHz
FET PROBE
TRISTATE
MA
V
DD
Y-OUTPUT
15
350 MHz
SCOPE
+5V
1
2
14
Power
Supply
From positive edge to positive edge
40
10
80
15
ps pk-pk
ps RMS
LOAD
5
7
9
8
COUNTER
ENVIRONMENTAL SPECIFICATIONS
Temperature
GND
Operating
Storage
-55º to +125°C
-55º to +125°C
To adapt Fet probe to receptacle
use Tektronix Part #103-0164-00
To connect output to scope use
use Tektronix Part #131-0258-00 (receptacle)
Shock – 1000 Gs, 0.35 ms, 1/2 sine wave, 3 shocks in each plane
Vibration – 10-2000 Hz of .06" d.a. or 20 Gs, whichever is less
Humidity – Resistant to 85° R.H. at 85°C
TEST CIRCUIT
ELECTRONICS
10 Commerce Dr
• New Rochelle NY 10801
+
International Sales: 1.914-712-2200 • USA Sales: +1.800.331.1236 • Fax: 914.712.2290 • www.mfelectronics.com • email:sales@mfelectronics.com
2 of 4
FULL SIZE D.I.L.
M package
M6306
VOLTAGE CONTROLLED
CRYSTAL OSCILLATORS
HCMOS/TTL 5V
Thru-Hole
Hi Reliability: -55º to +125ºC
TRISTATE, 1 MHz to 35 MHz
TABLE 2 — RELIABILITY TEST PROCEDURE
AND CONDITIONS FOR QUARTZ CRYSTAL OSCILLATORS
TABLE 1
I. Group A
Each unit undergoes the follow ing:
Electrical Characteristics at -55º, 25º and 125°C
1. Stabilization Bake MIL-STD-883 Method 1008, Cond. B
2. Temperature Cycling MIL-STD-883 Method 1010, Cond. B
Frequency @ 4.5, 5.0 and 5.5 volts (for 5 volts units)
Symmetry (Duty Cycle)
Input current
3. Centrifuge
4. Burn-in
MIL-STD-883 Method 2001, Cond. A
MIL-STD-883 Method 1015, Cond. B
(125ºC for 168 hours with bias)
Zero/One levels
Rise/Fall times
Physical Dimensions
Length/width
Height
5. Fine Leak
6. Gross Leak
MIL-STD-883 Method 1014, Cond. A1
MIL-STD-883 Method 1014, Cond. C
7. Electrical Test at 25ºC and temperature extremes, as follows:
A. Frequency at specified H. Duty Cycle (FL)
Package finish (Corrosion, discoloration, etc.)
Marking placement/legibility
control voltages
B. Current
I. Frequency at 5.5V
J. Frequency at 4.5V
K. “Zero” logic level
L. “One” logic level
M. Pullability
II. Group B – Life Test
1000 hrs at 125°C with bias and load
III.Group C – All units have passed Group A testing
C. Rise Time (NL)
D. Fall Time (NL)
E. Rise Time (FL)
F. Fall Time (FL)
G. Duty Cycle (NL)
A. Subgroup 1 – 8 pcs.
N. Pull Linearity
Standard
Condition
Description
End point measurement
Frequency
Output waveform
MIL-STD-883 METHOD 2002
COND. B
Mechanical shock
1500 g's, 5ms
5 drops, 6 axis
Test data on each unit is available for additional cost
MIL-STD-883 METHOD 2007
COND. A
Vibration, var.
freq. 20 g's,
Frequency
Output waveform
.06" disp., 20-
20,000-20 Hz
PROCESSING FLOW CHART
MIL-STD-883 METHOD 2003
Solderability
Visual 95% coverage
B. Subgroup 2 - 4 pcs (One-half of Subgroup 1)
•
100 Level
Sub-Assemblies
Snapstrate
MIL-STD-883 METHOD 1011
COND. B
Thermal Shock
Liq. to liq.
Frequency
Output waveform
Stock
IQC
Print & Fire
MTS201
Ink
•
200 Level
• 300 Level
–55 to 125°C,
15 cycles
Sub-AssembliesSub-Assemblies
Translator
IC
IQC Stock
Capacitor
Epoxy
Lid
Spring
Bond Wire
Reader
MIL-STD-202 METHOD 105
COND. B.
Altitude, 3.44
inch Hg, 12 hrs
Frequency
Output waveform
IC Attach
MTA305
Wire Bond Header Component
In Process Crystal
Test Attach
MTF402 MTA330
MTA315
MTA316
Attach
& Cure
MTA320
Attach
& Cure
MTA310
MIL-STD-883 METHOD 1004
Moisture resist.
with 5V applied
25-65°C, 90 to
100% RH, 10 cycles
Frequency
Output waveform
MIL-STD-202 METHOD 210
COND. A.
Resistance to
Solder Heat
Immersion @350°C
3.5 sec
Frequency
Output waveform
Crystal
Blank
IQC Stock
Sort
MTC103 MTC101 MTC105 Xtal Bake
MTC104 MTC113
Etch
Clean Pre-Plate
Base
Plate
Crystal 100%
Bake Visual
Stock
MTC110 MTA331 QCI101
Calibration
MTA340
C. Subgroup 3 - 4 pcs. (One half of Subgroup 1)
• •
Standard
Condition
Storage Temp.
No. Oper.
Description
24 hrs. @ –55°C
24 hrs. @ 125°C
End point measurement
Frequency
Output waveform
Post Seal
Bake
MTA361
Marking Clean Centrifuge Post Seal Temperature
Weld In-Process Internal Stabilization
MTF360 MTF339 MTF404
Bake
Cycle
MTA350
Test
Visual
Bake
MTF361
MTF403
MTF402 QCI306 MTA345
MIL-STD-883 METHOD 1009
COND. A
Salt Atmosphere
24 hrs. @ 35°C
.5-3.0% Solution
Frequency
Output waveform
Visual
Pre-Burn In
Burn In
Fine Leak Gross Leak Final Test
Elec. QC
External Packing
Final QAF
QC506
SHIP
Test
MTA430
MTA405 MTA410 Test Spec 109 .04% AQL
Visual
MTF501
MTA420
MTF420
QAF608
8
–
MTF500
MIL-STD-883 METHOD 1014
COND. B
Fine Leak
Qs <5 x 10
NOTE:
• Indicates where Sub-Contracted Assemblies and Sub-Assemblies enter the Manufacturing line.
MIL-STD-883 METHOD 1014
COND. C
Gross Leak
Visual in 125°C
Detector fluid
All Sub-Contracted Assemblies and Sub-Assemblies are inspected to QCI307 and stored in stock until needed.
• • Indicates Post Seal Bake and Temperature Cycle Processes may be performed in reverse order.
ELECTRONICS
10 Commerce Dr
• New Rochelle NY 10801
+
International Sales: 1.914-712-2200 • USA Sales: +1.800.331.1236 • Fax: 914.712.2290 • www.mfelectronics.com • email:sales@mfelectronics.com
3 of 4
FULL SIZE D.I.L.
M package
M6306
VOLTAGE CONTROLLED
CRYSTAL OSCILLATORS
HCMOS/TTL 5V
Thru-Hole
Hi Reliability: -55º to +125ºC
TRISTATE, 1 MHz to 35 MHz
M6306-16.384M, TYPICAL
FREQUENCY STABILITY OVER TEMPERATURE
AT VARIOUS CONTROL VOLTAGE LEVELS
LINEARITY OF PULL
300
250
200
150
100
50
250
200
150
100
50
0
0
-50
-50
Deviation@ Vcc=5v
Deviation@ Vcc=2.5v
Deviation@ Vcc=0v
-100
-150
-200
-250
-300
-100
-150
-200
-250
Deviation@ 25ºC
70
80 90 100 110 120125
-55 -45 -35 -25 -15 -5
0
10 20 30 40 50 60
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0
Control Voltage, Vcc
Temperature, ºC
HOW TO ORDER
For Part Number, put package type before model number,
and add frequency in MHz, for example:
M 6 3 0 6- 1 9 .4 4 M
M is
full size DIL
6306
is model
type
19.44 M
frequency
in MHz
Unless customer-specific terms and conditions
are signed by an officer of MF Electronics, the
sale of this and all MF Electronics products are
subject to terms and conditions set forth at
www.mfelectronics.com/terms
SS#
M6306
Rev.
B
ELECTRONICS
10 Commerce Dr
• New Rochelle NY 10801
+
International Sales: 1.914-712-2200 • USA Sales: +1.800.331.1236 • Fax: 914.712.2290 • www.mfelectronics.com • email:sales@mfelectronics.com
4 of 4
相关型号：
©2020 ICPDF网 联系我们和版权申明