T1380-125M [CTS]
Oscillator,;
| 型号： | T1380-125M |
| 厂家： | 
CTS |
| 描述： | Oscillator, |
| 文件： | 总3页 (文件大小：70K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SURFACE MOUNT
T package
T1380, T1381,
T1382, T1388,
T1389
T3390, T3391,
T3392, T3398,
T3399
CRYSTAL
OSCILLATORS
HCMOS/TTL 3.3V
5 x 7 mm Surface Mount
Commercial: 0º to 70ºC
FIXED FREQUENCY, 1 KHz to 125 MHz
TRISTATE, 14 KHz to 125 MHz
FEATURES
Description
• Fixed frequency or Tristate
• Very low power when tristated
• Start up time less than 5 ms.
• Stability options from ±100 ppm to ±20 ppm
• Guaranteed start-up with ramping DC Supply
• 45/55 symmetry is standard
MF Electronics T-series surface mount
(SMD) oscillators provide clock waveforms
needed to clock standard HCMOS or TTL
circuits.
TYPICAL APPLICATIONS
• Any surface mount PCB that requires a standard HCMOS/TTL 3.3V clock, including microprocessors
and microcontrollers.
CONNECTIONS
Fixed Output
Models
Tristate Models
0.071 (1.8) SQ.
Marking
PAD 1
NOT USED
Floating or 1 : Oscillator runs
is shown
on marking
spec
Ground or 0 : Disable or Tristate
0.193 ± .007
(5.0)
PAD 2
PAD 3
PAD 4
Ground and Case
0.165
(4.2)
Output
0.274 ± .007
(7.0)
+3.3V, V
DD
0.200
(5.1)
PAD 1
.075 (1.9)
.067 (1.7)
SUGGESTED PC PADS
PAD 1
PAD 2 (GND)
230
200
Millimeters are shown in ( ).
160
140
.045 ± .008
(1.1)
PAD 4
(VDD
)
.048 ± .003
(1.0)
100
0.200 ± .005
(5.1)
PAD 3 (OUTPUT)
“T” Package
30
sec
min.
50 to
100 sec
20 30 to 20
sec 50 sec sec
min.
min.
Time (sec)
Recommended Reflow Soldering Profile
ELECTRONICS
10 Commerce Dr
• New Rochelle NY 10801
+
International Sales: 1.914-712-2200 • USA Sales: +1.800.331.1236 • Fax: 914.712.2290 • www.mfelectronics.com • email:sales@mfelectronics.com
1 of 3
SURFACE MOUNT
T package
CRYSTAL OSCILLATORS
HCMOS/TTL 3.3V
5 x 7 mm Surface Mount
Commercial: 0º to 70ºC
FIXED FREQUENCY, 1 KHz to 125 MHz
TRISTATE, 14 KHz to 125 MHz
T1380, T1381,
T1382, T1388,
T1389
T3390, T3391,
T3392, T3398,
T3399
TF
TR
ELECTRICAL SPECIFICATIONS
Frequency Range
I
LEVEL
V
DD —.4V
50%
0.4V
Fixed Output
1 KHz to 125 MHz
14 KHz to 125 MHz
Tristate
O
1.4V
LEVEL
Frequency Stability Includes calibration at 25°C, operating temperature,
change of input voltage, change of load, shock and
vibration.
40-60%
CMOS
100%
40-60%
TTL
MIN
TYP
MAX
UNITS
at 1.4V
Input Voltage, VDD
3.0
3.3
3.6
volts
WAVEFORMS
Input Current
3 M to 10 MHz
10.1 to 20 MHz
20.1 to 30 MHz
30.1 to 50 MHz
50.1 to 67 MHz
67.1 to 125 MHz
2.0
3.0
5.0
7.0
11.0
13.0
3.5
4.0
6.0
8.0
12.0
16.0
mA
mA
mA
mA
mA
mA
FIXED OUTPUT
TRISTATE
Output Levels
Marking Frequency
Marking Frequency
“0” Level, sinking 16 mA
“1” Level
CMOS, sourcing 8 mA
0.4
volts
volts
MODEL Letter ID*
Stability
MODEL Letter ID*
Stability
VDD-.4
T1380
T1381
T1382
T1388
T1389
E
AL
F
±100 ppm
±25 ppm
±50 ppm
±20 ppm
±32 ppm
T3390
T3391
T3392
T3398
T3399
G
Q
±100 ppm
±25 ppm
±50 ppm
±20 ppm
±32 ppm
Rise and Fall Times
CMOS, 15 pf,
H
BV
BW
BY
BZ
20 to 80% (<60 MHz)
CMOS, 30 pf,
20 to 80% (<60 MHz)
CMOS, 50 pf,
3.0
4.0
6.0
4
5
8
ns
ns
ns
* See Marking Specification
20 to 80% (<60 MHz)
CMOS, 15 pf,
20 to 80% (>60 MHz)
CMOS, 30 pf,
20 to 80% (>60 MHz)
2.0
3.0
2.5
4.5
ns
ns
MARKING SPECIFICATION
The format for the marking is:
Jitter
from positive edge to positive edge
100
ps RMS
percent
MF Electronics Model
T Oscillator Code
Date
Code
Symmetry
CMOS, @ 50% VDD
48/52
45/55
MTXXYY
125.00
Aging
First year
After first year
3
1
ppm
ppm/yr
Pin 1
Frequency
Input Requirements for Pin 1.:
“1”: On – Pin 1 may float or 2.4V min., sourcing 400 microAmp
“0”: Disable or Tristate – Pin 1 requires 0.4V, sinking 400 microAmp.
ELECTRONICS
10 Commerce Dr
• New Rochelle NY 10801
+
International Sales: 1.914-712-2200 • USA Sales: +1.800.331.1236 • Fax: 914.712.2290 • www.mfelectronics.com • email:sales@mfelectronics.com
2 of 3
CRYSTAL OSCILLATORS
HCMOS/TTL 3.3V
5 x 7 mm Surface Mount
Commercial: 0º to 70ºC
FIXED FREQUENCY, 1 KHz to 125 MHz
TRISTATE, 14 KHz to 125 MHz
ENVIRONMENTAL SPECIFICATIONS
Temperature
Operating
Storage
0º to 70°C
-55º to +125°C
PAD 1.
CONTROL VOLTAGE
Shock – 1000 Gs, 0.35 ms, 1/2 sine wave, 3 shocks in each plane
Vibration – 10-2000 Hz of .06" d.a. or 20 Gs, whichever is less
Humidity – Resistant to 85° R.H. at 85°C
FET PROBE
LOAD
V
DD
Y-OUTPUT
+3.3V
DD
350 MHz
SCOPE
V
MA
1
7
14
8
Power
Supply
MECHANICAL SPECIFICATIONS
0.1 MF
COUNTER
Leak – MIL STD 883, Method 1014, condition A1
Case – Hermetically sealed package
GND
Pads – 60 microinch of gold over nickel
Marking – Epoxy ink or laser engraved
Resistance to Solvents – MIL STD 202, Method 215
To adapt Fet probe to receptacle
use Tektronix Part #103-0164-00
To connect output to scope use
use Tektronix Part #131-0258-00 (receptacle)
TEST CIRCUIT
Fig.1 T3392-20M with 25pf load
Fig. 2 T3392-20M without load
HOW TO ORDER
For Part Number, put package type before model number,
and add frequency in MHz, for example:
T 3 3 9 1 - 1 2 5 M
“T” is SMD
“T” package
“3391”
is model
type
“125 M”
frequency
in MHz
Unless customer-specific terms and conditions
are signed by an officer of MF Electronics, the
sale of this and all MF Electronics products are
subject to terms and conditions set forth at
www.mfelectronics.com/terms
SS#
Rev.
A
T1380
ELECTRONICS
10 Commerce Dr
• New Rochelle NY 10801
+
International Sales: 1.914-712-2200 • USA Sales: +1.800.331.1236 • Fax: 914.712.2290 • www.mfelectronics.com • email:sales@mfelectronics.com
3 of 3
相关型号：
©2020 ICPDF网 联系我们和版权申明