MB88154APNF-G-113-JNERE1 [CYPRESS]
Spread Spectrum Clock Generator;
| 型号： | MB88154APNF-G-113-JNERE1 |
| 厂家： | 
CYPRESS |
| 描述： | Spread Spectrum Clock Generator 时钟 光电二极管 外围集成电路 晶体 |
| 文件： | 总24页 (文件大小：531K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
The following document contains information on Cypress products. The document has the series
name, product name, and ordering part numbering with the prefix “MB”. However, Cypress will
offer these products to new and existing customers with the series name, product name, and
ordering part number with the prefix “CY”.
How to Check the Ordering Part Number
1. Go to www.cypress.com/pcn.
2. Enter the keyword (for example, ordering part number) in the SEARCH PCNS field and click
Apply.
3. Click the corresponding title from the search results.
4. Download the Affected Parts List file, which has details of all changes
For More Information
Please contact your local sales office for additional information about Cypress products and
solutions.
About Cypress
Cypress is the leader in advanced embedded system solutions for the world's most innovative
automotive, industrial, smart home appliances, consumer electronics and medical products.
Cypress' microcontrollers, analog ICs, wireless and USB-based connectivity solutions and reliable,
high-performance memories help engineers design differentiated products and get them to market
first. Cypress is committed to providing customers with the best support and development
resources on the planet enabling them to disrupt markets by creating new product categories in
record time. To learn more, go to www.cypress.com.
MB88154A
Spread Spectrum Clock Generator
MB88154Ais a clock generator for EMI (Electro Magnetic Interference) reduction. The peak of unnecessary radiation noise (EMI) can
be attenuated by making the oscillation frequency slightly modulate periodically with the internal modulator. It corresponds to both of
the center spread which modulates input frequency as Middle Centered and down spread which modulates so as not to exceed input
frequency.
Features
■ Input frequency : 16.6 MHz to 67 MHz
■ Output frequency: 16.6 MHz to 67 MHz (One time input frequency)
■ Modulation rate can select from 0.5%, 1.0%,
1.5% or − 1.0%, − 2.0%, − 3.0%. (For center spread / down spread.)
■ Equipped with crystal oscillation circuit: Range of oscillation 16.6 MHz to 48 MHz
■ The external clock can be input: 16.6 MHz to 67 MHz
■ Modulation clock output duty : 40% to 60%
■ Modulation clock cycle-cycle jitter : Less than 100 ps
■ Low current consumption by CMOS process : 5.0 mA (24 MHz : Typ-sample, no load)
■ Power supply voltage : 3.3 V 0.3 V
■ Operating temperature : − 40 °C to +85 °C
■ Package : SOP 8-pin
Cypress Semiconductor Corporation
Document Number: 002-08252 Rev. *B
•
198 Champion Court
•
San Jose, CA 95134-1709
•
408-943-2600
Revised December 12, 2017
MB88154A
Contents
PRODUCT LINEUP ................................................................. 3
PIN ASSIGNMENT .................................................................. 3
PIN DESCRIPTION ................................................................. 3
I/O CIRCUIT TYPE .................................................................. 4
OUTPUT CLOCK DUTY CYCLE (TDCC, TDCR = TB/TA) . 13
INPUT FREQUENCY (FIN = 1/TIN) ..................................... 13
OUTPUT SLEW RATE (SR) ................................................ 13
CYCLE-CYCLE JITTER (TJC = | TN − TN + 1 |) ................. 14
MODULATION WAVEFORM ................................................ 15
LOCK-UP TIME ..................................................................... 16
OSCILLATION CIRCUIT ....................................................... 17
INTERCONNECTION CIRCUIT EXAMPLE .......................... 18
EXAMPLE CHARACTERISTICS .......................................... 19
ORDERING INFORMATION ................................................. 20
HANDLING DEVICES ............................................................. 5
Preventing Latch-up ......................................................... 5
Handling unused pins ....................................................... 5
The attention when the external clock is used ................. 5
Power supply pins ............................................................ 5
Oscillation circuit .............................................................. 5
BLOCK DIAGRAM .................................................................. 6
PIN SETTING .......................................................................... 7
ABSOLUTE MAXIMUM RATINGS ........................................ 9
RECOMMENDED OPERATING CONDITIONS .................... 10
ELECTRICAL CHARACTERISTICS .................................... 11
PACKAGE DIMENSION ....................................................... 21
Document History ................................................................ 22
Sales, Solutions, and Legal Information ........................... 23
Document Number: 002-08252 Rev. *B
Page 2 of 23
MB88154A
1. Product Lineup
MB88154A has two kinds of input frequency, and three kinds of modulation type (center/down spread), total six line-ups.
Product
Input/Output Frequency
16.6 MHz to 40 MHz
33 MHz to 67 MHz
Modulation Type
MB88154A-103
MB88154A-112
MB88154A-113
Down spread
Center spread
16.6 MHz to 40 MHz
2. Pin Assignment
TOP VIEW
CKOUT
VDD
1
2
3
4
8
7
6
5
SEL1
REFOUT
SEL0
MB88154A
VSS
XIN
XOUT
SOB008
3. Pin Description
Pin Name
CKOUT
VDD
I/O
O
⎯
⎯
I
Pin No.
Description
1
2
3
4
5
6
7
8
Modulated clock output pin
Power supply voltage pin
GND pin
VSS
XIN
Crystal resonator connection pin/clock input pin
Crystal resonator connection pin
Modulation rate setting pin
XOUT
SEL0
O
I
REFOUT
SEL1
O
I
Non-modulated clock output pin
Modulation rate setting pin
Document Number: 002-08252 Rev. *B
Page 3 of 23
MB88154A
4. I/O Circuit Type
Pin
Circuit Type
Remarks
SEL0
SEL1
CMOS hysteresis input
CKOUT
REFOUT
■ CMOS output
■ IOL = 3 mA
Note : For XIN and XOUT pins, refer to “Oscillation Circuit”
Document Number: 002-08252 Rev. *B
Page 4 of 23
MB88154A
5. Handling Devices
5.1 Preventing Latch-up
A latch-up can occur if, on this device, (a) a voltage higher than VDD or a voltage lower than VSS is applied to an input or output pin or
(b) a voltage higher than the rating is applied between VDD pin and VSS pin. The latch-up, if it occurs, significantly increases the power
supply current and may cause thermal destruction of an element. When you use this device, be very careful not to exceed the
maximum rating.
5.2 Handling Unused Pins
Do not leave an unused input pin open, since it may cause a malfunction. Handle by, using a pull-up or pull-down resistor.
Unused output pin should be opened.
5.3 The Attention When the External Clock is Used
Input the clock to XIN pin, and XOUT pin should be opened when you use the external clock.
Please pay attention so that an overshoot and an undershoot do not occur to an input clock of XIN pin.
5.4 Power Supply Pins
Please design connecting the power supply pin of this device by as low impedance as possible from the current supply source.
We recommend connecting electrolytic capacitor (about 10 μF) and the ceramic capacitor (about 0.01 μF) in parallel between VSS
pin and VDD pin near the device, as a bypass capacitor.
5.5 Oscillation Circuit
Noise near the XIN and XOUT pins may cause the device to malfunction. Design printed circuit boards so that electric wiring of XIN
or XOUT pin and the resonator do not intersect other wiring.
Design the printed circuit board that surrounds the XIN and XOUT pins with ground.
Document Number: 002-08252 Rev. *B
Page 5 of 23
MB88154A
6. Block Diagram
VDD
2
8
6
1
SEL1
CKOUT
Modulation rate
setting
Modulation
clock output
SEL0
PLL block
Reference
clock
XOUT
5
4
Reference clock output
7
REFOUT
XIN
Rf = 1 MΩ
3
VSS
1
−
M
V/I
conversion
Charge
pump
Phase
compare
IDAC
ICO
Modulation
Clock
output
1
−
N
Reference
clock
Loop filter
Modulation
rate setting/
Modulation
enable setting
1
−
L
Modulation
logic
MB88154A PLL block
A glitchless IDAC (current output D/A converter) provides precise modulation, thereby dramatically reducing
EMI.
Document Number: 002-08252 Rev. *B
Page 6 of 23
MB88154A
7. Pin Setting
SEL 0, SEL 1 Modulation Rate Setting
Modulation Rate
SEL1
SEL0
MB88154A-103
Down Spread
− 1.0%
MB88154A-112, MB88154A-113
Center Spread
0.5%
L
L
L
H
L
− 2.0%
− 3.0%
1.0%
H
H
1.5%
H
No spread
No spread
Notes:
■ The modulation rate can be changed at the level of the pin. Spectrum does not spread when “H” level is set to SEL0 and SEL1 pins.
The clock with low jitter can be obtained.
■ When changing the modulation rate setting, the stabilization wait time for the modulation clock is required. The stabilization wait
time for the modulation clock take the maximum value of “ Electrical Characteristics AC Characteristics Lock-Up time”.
Center Spread
Spectrum is spread (modulated) by centering on the input frequency.
Modulation width 3.0%
Radiation level
−1.5%
+1.5%
Frequency
Input frequency
Modulation rate center spread example of 1.5%
Document Number: 002-08252 Rev. *B
Page 7 of 23
MB88154A
Down Spread
Spectrum is spread (modulated) below the input frequency.
Modulation width 3.0%
Radiation level
−3.0%
Frequency
Frequency in modulation off
Modulation width down spread example of − 3.0%
Document Number: 002-08252 Rev. *B
Page 8 of 23
MB88154A
8. Absolute Maximum Ratings
Rating
Parameter
Symbol
Unit
Min
− 0.5
VSS − 0.5
VSS − 0.5
− 55
Max
+ 4.0
VDD + 0.5
VDD + 0.5
+ 125
Power supply voltage*
Input voltage*
VDD
VI
V
V
Output voltage*
VO
TST
TJ
V
Storage temperature
°C
°C
Operation junction
temperature
− 40
+ 125
Output current
Overshoot
IO
− 14
⎯
+ 14
VDD + 1.0 (tOVER ≤ 50 ns)
⎯
mA
V
VIOVER
VIUNDER
Undershoot
VSS − 1.0 (tUNDER ≤ 50 ns)
V
* : The parameter is based on VSS = 0.0 V.
WARNING:
Semiconductor devices can be permanently damaged by application of stress (voltage, current, temperature, etc.) in
excess of absolute maximum ratings. Do not exceed these ratings.
Overshoot/Undershoot
tUNDER ≤ 50 ns
VIOVER ≤ VDD + 1.0 V
VDD
VSS
Input pin
VIUNDER ≤ VSS − 1.0 V
tOVER ≤ 50 ns
Document Number: 002-08252 Rev. *B
Page 9 of 23
MB88154A
9. Recommended Operating Conditions
(VSS = 0.0 V)
Value
Typ
3.3
Parameter
Symbol
Pin
Conditions
Unit
Max
Min
3.0
Power supply voltage
“H” level input voltage
“L” level input voltage
VDD
VIH
VIL
VDD
⎯
⎯
⎯
3.6
V
V
V
XIN,
SEL0,
SEL1
VDD × 0.80
VSS
⎯
VDD + 0.3
VDD × 0.20
⎯
Input clock duty cycle
Input clock through rate
tDCI
XIN
XIN
16.6 MHz to 67 MHz
40
50
60
%
SRIN
Input frequency
40 MHz to 67 MHz
0.0475×fin−
⎯
⎯
V/ns
1.75
Operating temperature
Ta
⎯
⎯
− 40
⎯
+ 85
°C
WARNING:
The recommended operating conditions are required in order to ensure the normal operation of the semiconductor
device. All of the device's electrical characteristics are warranted when the device is operated within these ranges.
Always use semiconductor devices within their recommended operating condition ranges. Operation outside these
ranges may adversely affect reliability and could result in device failure.
No warranty is made with respect to uses, operating conditions, or combinations not represented on the data sheet.
Users considering application outside the listed conditions are advised to contact their representatives beforehand.
Input clock duty cycle (tDCI = tb/ta)
ta
tb
1.5 V
XIN
Input clock through rate (SRIN)
VDD × 0.80
VDD × 0.20
XIN
trin
tfin
Note : SRIN = (VDD × 0.80 − VDD × 0.20) /trin, SRIN = (VDD × 0.80 − VDD × 0.20) /tfin
Document Number: 002-08252 Rev. *B
Page 10 of 23
MB88154A
10. Electrical Characteristics
■ DC Characteristics
(Ta = −40 °C to + 85 °C, VDD = 3.3 V 0.3 V, VSS = 0.0 V)
Value
Parameter
Symbol
Pin
Conditions
Unit
Min
Typ
Max
Power supply current
ICC
VDD
no load capacitance at 24
MHz output
⎯
5.0
7.0
mA
Output voltage
VOH
VOL
ZO
CKOUT,
REFOUT
“H” level output
IOH = − 3 mA
“L” level output
IOL = 3 mA
VDD − 0.5
⎯
⎯
70
⎯
VDD
0.4
⎯
V
V
VSS
⎯
Output impedance
Input capacitance
CKOUT,
REFOUT
16.6 MHz to 67 MHz
Ω
CIN
XIN,
SEL0,
SEL1
Ta = + 25 °C,
VDD = VI = 0.0 V,
f = 1 MHz
⎯
16
pF
Document Number: 002-08252 Rev. *B
Page 11 of 23
MB88154A
■ AC Characteristics
(Ta = −40 °C to + 85 °C, VDD = 3.3 V 0.3 V, VSS = 0.0 V)
Value
Parameter
Symbol
Pin
Conditions
Unit
Min
16.6
40
Typ
⎯
⎯
⎯
⎯
⎯
⎯
⎯
Max
40
Oscillation frequency
fx
XIN,
XOUT
Fundamental oscillation
3rd over-tone oscillation
MB88154A-103/113
MB88154A-112
MHz
48
Input frequency
fin
XIN
16.6
33
40
MHz
MHz
V/ns
67
Output frequency
fOUT
SR
CKOUT,
REFOUT
MB88154A-103/113
MB88154A-112
16.6
33
40
67
Output slew rate
CKOUT,
REFOUT
0.4 V to 2.4 V
load capacitance 15 pF
0.3
2.0
Output clock duty cycle
tDCC
tDCR
CKOUT
REFOUT
CKOUT
1.5 V
1.5 V
40
⎯
⎯
fin/2280
(2280)
60
%
%
tDCI − 10*
fin/2640
(2640)
tDCI + 10*
fin/1920
(1920)
Modulation frequency
(Number of input clocks
per modulation)
fMOD (nMOD)
MB88154A-103/113
kHz
(clks)
MB88154A-112
fin/4400
(4400)
fin/3800
(3800)
fin/3200
(3200)
Lock-Up time
tLK
CKOUT
CKOUT
⎯
⎯
⎯
2
5
ms
Cycle-cycle jitter
tJC
No load capacitance,
Ta = +25 °C, VDD = 3.3 V
⎯
100
ps-rms
* : Duty of the REFOUT output is guaranteed only for the following A and B because it depends on tDCI of input clock duty.
A. Resonator : When resonator is connected with XIN and XOUT and oscillates normally.
B. External clock input : The input level is Full - swing (VSS − VDD).
<Definition of modulation frequency and number of input clocks per modulation>
fout (Output frequency)
Modulation wave form
t
f
MOD (Min)
fMOD (Max)
t
Clock count
nMOD (Max)
Clock count
nMOD (Min)
MB88154A contains the modulation period to realize the efficient EMI reduction.
The modulation period fMOD depends on the input frequency and changes between fMOD (Min) and fMOD (Max) .
Furthermore, the average value of fMOD equals the typical value of the electrical characteristics.
Document Number: 002-08252 Rev. *B
Page 12 of 23
MB88154A
11. Output Clock Duty Cycle (tDCC, tDCR = tb/ta)
ta
tb
1.5 V
CKOUT,
REFOUT
12. Input Frequency (fin = 1/tin)
tin
0.8 VDD
XIN
13. Output Slew Rate (SR)
2.4 V
0.4 V
CKOUT,
REFOUT
t
r
tf
Note : SR = (2.4−0.4) /tr, SR = (2.4−0.4) /tf
Document Number: 002-08252 Rev. *B
Page 13 of 23
MB88154A
14. Cycle-cycle Jitter (tJC = | tn − tn + 1 |)
CKOUT
tn
tn+1
Note : Cycle-cycle jitter is defined the difference between a certain cycle and immediately after
(or, immediately before) .
Document Number: 002-08252 Rev. *B
Page 14 of 23
MB88154A
15. Modulation Waveform
■
1.5% modulation rate, Example of center spread
CKOUT
output frequency
+ 1.5 %
Frequency at modulation OFF
Time
− 1.5 %
fMOD
■
−1.0% modulation rate, Example of down spread
CKOUT
output freqquency
Frequency at modulation OFF
Time
− 0.5 %
− 1.0 %
fMOD
Document Number: 002-08252 Rev. *B
Page 15 of 23
MB88154A
16. Lock-up Time
3.0 V
Internal clock
stabilization wait time
VDD
XIN
VIH
Setting pin
SEL0,
tLK
(lock-up time )
SEL1
CKOUT
If the setting pin is fixed at the “H” or “L” level, the maximum time after the power is turned on until the set clock signal is output from
CKOUT pin is (the stabilization wait time of input clock to XIN pin) + (the lock-up time “tLK”). For the input clock stabilization time,
check the characteristics of the resonator or oscillator used.
Note : When the pin setting is changed, the CKOUT pin output clock stabilization time is required. Until the output clock signal
becomes stable, the output frequency, output clock duty cycle, modulation period, and cycle-cycle jitter cannot be guaranteed.
It is therefore advisable to perform processing such as cancelling a reset of the device at the succeeding stage after
the lock-up time.
Document Number: 002-08252 Rev. *B
Page 16 of 23
MB88154A
17. Oscillation Circuit
The left side of figures below shows the connection example about general resonator. The oscillation circuit has the built-in feedback
resistance (Rf) . The value of capacity (C1 and C2) is required adjusting to the most suitable value of an individual resonator.
The right side of figures below shows the example of connecting for the 3rd over-tone resonator. The value of capacity (C1, C2 and
C3) and inductance (L1) is needed adjusting to the most suitable value of an individual resonator. The most suitable value is different
by individual resonator. Please refer to the resonator manufacturer which use for the most suitable value. When an external clock is
used (the resonator is not used) , input the clock to XIN pin and do not connect anything with XOUT.
■ When using a resonator
MB88154A LSI Internal
Rf (1 MΩ)
Rf (1 MΩ)
XIN Pin
XIN Pin
XOUT Pin
XOUT Pin
MB88154A LSI External
L1
C1
C2
C1
C2
C3
Normal resonator
3rd over-tone resonator
■ When using an external clock
MB88154A LSI Internal
XOUT Pin
Rf (1 MΩ)
XIN Pin
MB88154A LSI External
External clock
OPEN
Note : Note that a jitter characteristic of an input clock may cause an affect a cycle-cycle jitter characteristic.
Document Number: 002-08252 Rev. *B
Page 17 of 23
MB88154A
18. Interconnection Circuit Example
SEL1
R2
1
2
3
4
8
7
6
5
MB88154A
R
1
+
SEL0
ENS
C4
C3
Xtal
C1
C2
C1, C2
C3
: Oscillation stabilization capacitance (refer to “ Oscillation Circuit”.)
: Capacitor of 10 μF or higher
C4
: Capacitor about 0.01 μF (connect a capacitor of good high frequency property
(ex. laminated ceramic capacitor) to close to this device.)
R1, R2
: Impedance matching resistor for board pattern
Document Number: 002-08252 Rev. *B
Page 18 of 23
MB88154A
19. Example Characteristics
The condition of the examples of the characteristic is shown as follows: Input frequency = 20 MHz (Output frequency = 20 MHz :
Using MB88154A-113), Power - supply voltage = 3.3 V, None load capacity.
Modulation rate =
1.5% (center spread)
Spectrum analyzer HP4396B is connected with CKOUT. The result of the measurement with RBW = 1 kHz (ATT use for − 6dB).
CH B Spectrum
10 dB /REF 0 dBm
No modulation
−6.18 dBm
Avg
4
modulation 1.5 %
−26.03 dBm
SWP 2.505 s
SPAN 4 MHZ
RBW# 1 kHZ
CENTER 20 MHZ
VBW 1 kHZ
ATT 6 dB
Document Number: 002-08252 Rev. *B
Page 19 of 23
MB88154A
20. Ordering Information
Modulation
type
Part number
Input/Output frequency
Package
Remarks
MB88154APNF-G-112-JNE1
MB88154APNF-G-113-JNE1
MB88154APNF-G-103-JNEFE1
MB88154APNF-G-112-JNEFE1
MB88154APNF-G-113-JNEFE1
MB88154APNF-G-103-JNERE1
MB88154APNF-G-112-JNERE1
MB88154APNF-G-113-JNERE1
33 MHz to 67 MHz
16.6 MHz to 40 MHz
16.6 MHz to 40 MHz
33 MHz to 67 MHz
16.6 MHz to 40 MHz
16.6 MHz to 40 MHz
33 MHz to 67 MHz
16.6 MHz to 40 MHz
Center
8-pin plastic SOP
(SOB008)
Down
Emboss taping
(EF type)
Center
Down
Emboss taping
(ER type)
Center
Document Number: 002-08252 Rev. *B
Page 20 of 23
MB88154A
21. Package Dimension
ꢈ
0.25
H D
ꢃ;
4
D
ꢏ
ꢅ
ꢅ
ꢏ
㻰
㻭
5
ꢈ
4
E1 E
45°
INDEX AREA
ꢇ
ꢇ
0.25
H D
ꢃ;
h
ꢀ
ꢄ
ꢄ
ꢀ
0.20
C A-B D
SIDE VIEW
㻮
5
BOTTOM VIEW
TOP VIEW
A
DETAIL A
A2
L2
ș
GAUGE
PLANE
A
㻯
SEATING
PLANE
C
A'
c
e
0.10
A-B
b
ꢎ
A1
L
L1
10
SECTION A-A'
b
0.13
C
D
8
SIDE VIEW
DETAIL A
127(6
ꢁꢂ $/ꢂ ', 0(16, 21ꢂ $5ꢂ, ꢂ 0, //, 0(7( ꢁ
ꢁꢂ ', 0(16, 21, 1 ꢂ $1ꢂ 7 2/(5$1&, 1 ꢂ 3( ꢂꢂ $6 0ꢂ <ꢀ ꢁ ꢅ ꢆ ꢀꢇꢇ ꢁ
DIMENSIONS
SYMBOL
A
MIN. NOM. MAX.
1.75
ꢁꢂ ', 0(16, 21, 1 ꢂ ꢂ, 1&/ 8'ꢂ 02/ ꢂ )/$6 ꢉꢂ ', 0(16, 21, 1 ꢂ (ꢂ '2(ꢂ 12ꢂ, 1&/ 8'(
ꢂꢂꢂꢂ, 17(5/($ ꢂ )/$6 ꢂ 2ꢂ 3527586, 2 ꢁꢂ, 17(5/($ ꢂ )/$6 ꢂ 2ꢂ 3527586, 216
ꢂꢂꢂꢂ 6+$/ꢂ 12ꢂ (;&(( ꢂ ꢁ ꢊꢃꢂ Pꢂ 3( ꢂ 6, ' ꢁꢂ ꢂ DQꢂ (ꢂ ', 0(16, 2ꢂ $5ꢂ '(7(50, 1('
0.25
1.50
0.05
1.30
A1
A2
D
ꢂꢂꢂꢂ $ꢂ '$78 ꢂ
ꢁ
1.40
ꢁꢂ 7+ꢂ 3$&.$*ꢂ 7 2ꢂ 0$ꢂ %ꢂ 6 0$//( ꢂ 7+$ ꢂ 7+ꢂ 3$&.$*ꢂ %277 2 ꢁ
ꢂꢂꢂꢂ ', 0(16, 21, 1 ꢂꢂ ꢂ DQꢂ (ꢂ $5ꢂ '(7(50, 1( ꢂ $ꢂ 7+ꢂ 287(50267
ꢂꢂꢂꢂ (;75( 0(ꢂ 2ꢂ 7+ꢂ 3/$67, ꢂ %2'ꢂ (;&/ 86, 9ꢂ 2ꢂ 02/ ꢂ )/$6 ꢉ
ꢂꢂꢂꢂ 7+ꢂ %$ ꢂ %855 ꢉꢂ *$7 ꢂ %855ꢂ $1ꢂ, 17(5/($ ꢂ )/$6 ꢉꢂ %8ꢂ, 1&/ 8', 1*
ꢂꢂꢂꢂ $1ꢂ 0, 6 0$7&ꢂ %(7 :(( ꢂ 7+ꢂ 7 2ꢂ $1ꢂ %277 2 ꢂ 2ꢂ 7+ꢂ 3/$67, ꢂ %2' ꢁ
5.05 BSC.
6.00 BSC.
3.90 BSC
E
E
1
ꢁꢂ '$780ꢂ
ꢂ ꢂ ꢂ 7 ꢂ %ꢂ '(7(50, 1( ꢂ $ꢂ '$78 ꢂ ꢁ
ș
0°
0.15
0.36
0.45
8°
ꢁꢂ ꢍ ꢂ, ꢂ 7+ꢂ 0$;, 08 ꢂ 180%( ꢂ 2ꢂ 7(50, 1$ꢂ 326, 7, 21ꢂ ) 2ꢂ 7+ꢂ 63(&, ), ('
ꢂꢂꢂꢂꢂ 3$&.$*ꢂ /(1*7 ꢁ
0.25
0.52
0.75
c
b
L
L
L
e
h
ꢁꢂ 7+ꢂ ', 0(16, 2ꢂ $33/ ꢂ 7 ꢂ 7+ꢂ )/$ꢂ 6(&7, 2ꢂ 2ꢂ 7+ꢂ /($ ꢂ %(7 :(( ꢂ ꢁ ꢀꢂ PP
ꢂꢂꢂꢂ 7 ꢂ ꢁ ꢃꢅ Pꢂ )52 ꢂ 7+ꢂ /($ ꢂ 7,
0.44
ꢁ
0.60
ꢁꢂ ', 0(16, 2ꢂ ꢍ Eꢂ '2(ꢂ 12ꢂ, 1&/ 8'ꢂ 7+ꢂ '$ 0%$ ꢂ 3527586, 2 ꢁꢂ $// 2 :$%/(
ꢂꢂꢂꢂ '$ 0%$ ꢂ 3527586, 2ꢂ 6+$/ꢂ %ꢂ ꢁ ꢀꢊ Pꢂ 7 27$ꢂ, ꢂ (;&(6ꢂ 2ꢂ 7+ꢂ ꢍ Eꢂ ', 0(16, 21
ꢂꢂꢂꢂ $ꢂ 0$;, 08 ꢂ 0$7(5, $ꢂ &21', 7, 2 ꢁ
1.05 REF
0.25 BSC
1
ꢂꢂꢂꢂ 7+ꢂ '$ 0%$ ꢂ 0$ꢂ 12ꢂ %ꢂ / 2&$7( ꢂ 2ꢂ 7+ꢂ / 2 :( ꢂ 5$', 8ꢂ 2ꢂ 7+ꢂ ) 22ꢁ
2
ꢁꢂ 7+, ꢂ &+$ 0)( ꢂ )($785ꢂ, ꢂ 237, 21$ ꢁꢂ / ꢂ, ꢂ, ꢂ 12ꢂ 35(6(1 ꢉꢂ 7+( ꢂ ꢂ 3, ꢂ ꢀ
ꢂꢂꢂꢂ, '(17, ), ( ꢂ 086ꢂ %ꢂ / 2&$7( ꢂ :, 7+, ꢂ 7+ꢂ, 1'(ꢂ $5(ꢂ, 1', &$7('
1.27 BSC.
0.40 BSC.
ꢀ ꢁꢂ ꢍ $ꢀꢂ, ꢂ '(), 1( ꢂ $ꢂ 7+ꢂ 9(57, &$ꢂ ', 67$1&ꢂ )52 ꢂ 7+ꢂ 6($7, 1 ꢂ 3/$1ꢂ 7 2
ꢂꢂꢂꢂꢂꢂꢂ 7+ꢂ / 2 :(6ꢂꢂ 32, 1ꢂ 2ꢂ 7+ꢂ 3$&.$*ꢂ %2'ꢂ (;&/ 8', 1 ꢂ 7+ꢂ /, ꢂ $1ꢂ 25
ꢂꢂꢂꢂꢂꢂꢂ 7+(50$ꢂ (1+$1&( 0(1ꢂ 2ꢂ &$9, 7 ꢂ '2 :ꢂ 3$&.$*ꢂ &21), *85$7, 21 ꢁ
002-15856 **
11. JEDEC SPECIFICATION NO. REF : N/A
Document Number: 002-08252 Rev. *B
Page 21 of 23
MB88154A
Document History
Spansion Publication Number: DS04-29129-2E
Document Title: MB88154A Spread Spectrum Clock Generator
Document Number: 002-08252
Orig. of
Change
Submission
Date
Revision
ECN
Description of Change
**
–
TAOA
TAOA
06/29/2009 Initial Release
*A
5563140
12/22/2016 Updated to Cypress Template
Deleated EOL part number: MB88154A-101/102/111
12/12/2017 Updated Package Dimensions: Updated to Cypress format.
Changed the package name from FPT-8P-M02 to SOB008.
*B
5991372
TAOA
Document Number: 002-08252 Rev. *B
Page 22 of 23
MB88154A
Sales, Solutions, and Legal Information
Worldwide Sales and Design Support
Cypress maintains a worldwide network of offices, solution centers, manufacturer’s representatives, and distributors. To find the office
closest to you, visit us at Cypress Locations.
Products
PSoC® Solutions
ARM® Cortex® Microcontrollers
cypress.com/arm
cypress.com/automotive
cypress.com/clocks
cypress.com/interface
cypress.com/iot
PSoC 1 | PSoC 3 | PSoC 4 | PSoC 5LP | PSoC 6
Automotive
Cypress Developer Community
Clocks & Buffers
Interface
Forums | WICED IOT Forums | Projects | Video | Blogs |
Training | Components
Internet of Things
Memory
Technical Support
cypress.com/memory
cypress.com/mcu
cypress.com/support
Microcontrollers
PSoC
cypress.com/psoc
cypress.com/pmic
cypress.com/touch
cypress.com/usb
Power Management ICs
Touch Sensing
USB Controllers
Wireless Connectivity
cypress.com/wireless
© Cypress Semiconductor Corporation, 2007-2017. This document is the property of Cypress Semiconductor Corporation and its subsidiaries, including Spansion LLC ("Cypress"). This document,
including any software or firmware included or referenced in this document ("Software"), is owned by Cypress under the intellectual property laws and treaties of the United States and other countries
worldwide. Cypress reserves all rights under such laws and treaties and does not, except as specifically stated in this paragraph, grant any license under its patents, copyrights, trademarks, or other
intellectual property rights. If the Software is not accompanied by a license agreement and you do not otherwise have a written agreement with Cypress governing the use of the Software, then Cypress
hereby grants you a personal, non-exclusive, nontransferable license (without the right to sublicense) (1) under its copyright rights in the Software (a) for Software provided in source code form, to
modify and reproduce the Software solely for use with Cypress hardware products, only internally within your organization, and (b) to distribute the Software in binary code form externally to end users
(either directly or indirectly through resellers and distributors), solely for use on Cypress hardware product units, and (2) under those claims of Cypress's patents that are infringed by the Software (as
provided by Cypress, unmodified) to make, use, distribute, and import the Software solely for use with Cypress hardware products. Any other use, reproduction, modification, translation, or compilation
of the Software is prohibited.
TO THE EXTENT PERMITTED BY APPLICABLE LAW, CYPRESS MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS DOCUMENT OR ANY SOFTWARE
OR ACCOMPANYING HARDWARE, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. To the extent
permitted by applicable law, Cypress reserves the right to make changes to this document without further notice. Cypress does not assume any liability arising out of the application or use of any
product or circuit described in this document. Any information provided in this document, including any sample design information or programming code, is provided only for reference purposes. It is
the responsibility of the user of this document to properly design, program, and test the functionality and safety of any application made of this information and any resulting product. Cypress products
are not designed, intended, or authorized for use as critical components in systems designed or intended for the operation of weapons, weapons systems, nuclear installations, life-support devices or
systems, other medical devices or systems (including resuscitation equipment and surgical implants), pollution control or hazardous substances management, or other uses where the failure of the
device or system could cause personal injury, death, or property damage ("Unintended Uses"). A critical component is any component of a device or system whose failure to perform can be reasonably
expected to cause the failure of the device or system, or to affect its safety or effectiveness. Cypress is not liable, in whole or in part, and you shall and hereby do release Cypress from any claim,
damage, or other liability arising from or related to all Unintended Uses of Cypress products. You shall indemnify and hold Cypress harmless from and against all claims, costs, damages, and other
liabilities, including claims for personal injury or death, arising from or related to any Unintended Uses of Cypress products.
Cypress, the Cypress logo, Spansion, the Spansion logo, and combinations thereof, WICED, PSoC, CapSense, EZ-USB, F-RAM, and Traveo are trademarks or registered trademarks of Cypress in
the United States and other countries. For a more complete list of Cypress trademarks, visit cypress.com. Other names and brands may be claimed as property of their respective owners.
Document Number: 002-08252 Rev. *B
Revised December 12, 2017
Page 23 of 23
相关型号：
©2020 ICPDF网 联系我们和版权申明