DS60XTR [DALLAS]
暂无描述;型号: | DS60XTR |
厂家: | DALLAS SEMICONDUCTOR |
描述: | 暂无描述 传感器 温度传感器 |
文件: | 总4页 (文件大小:59K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
PRELIMINARY
DS60
Micro-Centigrade Temperature Sensor
www.dalsemi.com
FEATURES
§ Factory calibrated for sensitivity of
PIN ASSIGNMENT
GND
+6.25mV/°C and accuracy of ±2.0°C
§ Measurement range of -40°C to +125°C
§ Ultra-low supply current
§ Compact SOT-23 package
VDD
VO
§ Wide power supply range (2.7V £ VDD
5.5V)
£
DS60R-TRL
3,000 PIECE SOT-23 REEL
§ Functionally-compatible with LM60
§ Applications include monitoring battery
packs, disk drives, printers, office equipment
or any space and power sensitive and
temperature sensitive environments.
PIN DESCRIPTION
VDD
VO
- Power Supply Voltage (2.7V to 5.5V)
- Sensor Output
GND
- Ground
DESCRIPTION
The DS60 Micro-Centigrade Temperature Sensor is a factory-calibrated voltage output Centigrade
temperature sensor. The thermometer output has a typical sensitivity of +6.25mV/°C and a DC offset of
+424 mV. The measurement range is -40°C to +125°C, corresponding to a typical output range of +174
mV to +1205 mV. Because the output voltage is positive for the entire temperature range, there is no need
for a negative power supply. The accuracy of the analog output, taking into account amplifier
nonlinearity, gain variations, and temperature sensor variations is ±2.0°C from 0°C to 85°C and within
±3.0°C over the full voltage and temperature range.
The power supply range of the DS60 is 2.7V to 5.5V. Its low current requirement of 125 µA and wide
supply range make it ideal in battery-powered applications. To further reduce power dissipation, the
DS60 can be switched to a zero power standby state by logic gate outputs capable of sourcing current of
this magnitude.
The small size of the SOT-23 package, wide power supply range, and ultra-low power dissipation allow
the DS60 to be used in thermal management applications that are currently limited to nonlinear
thermistors. These include battery packs, LCD displays, disk drives, power supplies, and appliances.
1 of 4
102299
DS60
ABSOLUTE MAXIMUM RATINGS*
Voltage on VDD
Output Current
GND -0.3V to +6.5V
5.0 mA
Operating Temperature
Storage Temperature
ESD Susceptibility (Human Body Model)
Soldering Temperature (Note 2)
-40°C to +125°C
-55°C to +150°C
2kV
215°C for 60 seconds (Vapor Phase)
220°C for 15 seconds (IR)
* This is a stress rating only and functional operation of the device at these or any other conditions
above those indicated in the operation sections of this specification is not implied. Exposure to
absolute maximum rating conditions for extended periods of time may affect reliability.
The Dallas Semiconductor DS60 is built to the highest quality standards and manufactured for long-term
reliability. All Dallas Semiconductor devices are made using the same quality materials and
manufacturing methods. However, the DS60 is not exposed to environmental stresses, such as burn-in,
that some industrial applications require. For specific reliability information on this product, please
contact the factory in Dallas at (972) 371–4448.
RECOMMENDED DC OPERATING CONDITIONS
(-40°C to +125°C; 2.7V £ VDD £ 5.5V)
PARAMETER
Supply Voltage
SYMBOL
CONDITION
MIN
TYP
MAX UNITS NOTES
5.5
VDD
2.7
V
1
DC ELECTRICAL CHARACTERISTICS:
Power Supply (Note 3)
(-40°C to +125°C; 2.7V £ VDD £ 5.5V)
PARAMETER
SYMBOL
CONDITION
MIN
TYP
MAX UNITS NOTES
125 µA
Supply Current
IDD
80
DC ELECTRICAL CHARACTERISTICS:
Temperature Sensor and Voltage Output (Note 3)
(-40°C to +125°C; 2.7V £ VDD £ 5.5V)
PARAMETER
SYMBOL
CONDITION
-40°C£TA
£125°C
MIN
TYP
MAX UNITS NOTES
±3
Thermometer Error
TERR
°C
4
0°C£TA
£85°C
±2
VO DC Offset
Sensor Gain
Nonlinearity
T = 0°C
424
6.25
mV
mV/°C
°C
1
5
6.0
6.5
±0.8
DV/DT
2.7V£VDD
£3.3V
3.0V£VDD
£5.5V
±2.0
mV
Power Supply
Regulation
±0.25
mV/V
Sensor Drift
±0.25
°C
6
Output Impedance
800
W
2 of 4
102299
DS60
NOTES:
1. All voltages are referenced to ground, unless otherwise specified.
2. Solder according to IPC standards.
3. Specified for VO sourcing 1.0 µA (max).
4. Thermometer error (expressed in °C) is the difference between [VO(T) - 424]/6.25 and the DS60 case
temperature at VDD = 3.0V, thus taking into account sensor error, DC offset error, sensor amplifier
gain variations, and amplifier nonlinearity.
5. Nonlinearity is the maximum deviation of an ideal linear slope for a given DS60.
6. This is the typical drift following 3 consecutive passes through a vapor phase.
TYPICAL DS60 THERMOMETER ERROR Figure 1
TBD
3 of 4
102299
DS60
DS60 PHYSICAL DIMENSIONS
INCHES
LTR
MIN
0.030
0.001
0.015
0.003
0.100
0.040
0.070
0.080
0.005
0.015
0°
MAX
0.040
0.006
0.022
0.008
0.120
0.060
0.085
0.100
0.015
0.025
8°
A
A1
B
C
D
E
e
H
I
NOTES:
1. PACKAGE OUTLINE EXCLUSIVE OF ANY MOLD
FLASHES DIMENSION.
2. PACKAGE
DIMENSION.
OUTLINE
EXCLUSIVE
OF
BURR
S
Q
56-G2017-001
4 of 4
102299
相关型号:
©2020 ICPDF网 联系我们和版权申明