RI-01_07 [DBLECTRO]
Machine Inertable Type Dip Switch; 机Inertable型DIP开关型号: | RI-01_07 |
厂家: | DB LECTRO INC |
描述: | Machine Inertable Type Dip Switch |
文件: | 总2页 (文件大小:374K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
P.C.B. LAYOUT
RI & RIR CONSTRUCTION
RI series
RIR series
1. RI series (raised actuator) and RIR series (recessed
actuator) available for different purposes.
2. Splay terminals allow for automatic insertion by IC
insertion machine.
3. Straight terminals are available for manual insertion.
4. Low contact resistance, and self-clean on contact area.
5. Gold plated electrical contact and terminal plating by gold
gives excellent results when soldering.
6. All materials are UL94V-0 grade fire retardant plastics.
ITEM Description Materials
Treatment
CIRCUIT DIAGRAM
1
2
3
Actuator
Cover
Base
UL94V-0 Nylon
UL94V-0 Nylon
UL94V-0 Nylon
Molded white
Molded black
Molded black
4
Contact
Beryllium Copper Gold plated at contact area
Gold plated at contact area
5
Terminal
Brass
and gold plating at terminal
DB LECTRO Inc. 3755 Place Java, Suite 140, Brossard, Québec, J4Y 0E4, Canada - T: 1-450-444-1424 / F: 1-450-444-4714 / www.dblectro.com
MODEL
PROD NO.
RI/RIR-01
RI/RIR-02
RI/RIR-03
RI/RIR-04
RI/RIR-05
RI/RIR-06
RI/RIR-07
RI/RIR-08
RI/RIR-09
RI/RIR-10
RI/RIR-12
NO. OF POS
DIM A
3.48
6.02
8.56
11.1
13.64
16.18
18.72
21.26
23.8
TERMINAL TYPE
01
02
03
04
05
06
07
08
09
10
12
0.137
0.237
0.337
0.437
0.537
0.637
0.737
0.837
0.937
1.037
1.237
26.34
31.42
SPECIFICATION
HOW TO ORDER
ELECTRICAL
Electrical life: 2000 operation cycles per switch 24VDC, 25mA.
Non-Switching Rating: 100mA, 50 VDC
Switching Rating: 25mA, 24VCD.
Contact resistance: (a) 50mΩ max. at initial
(b) 100mΩ max. after life test.
Insulation resistance: 100MΩ min. (at 500VDC)
Dielectric Strength: 500VAC/1 minute.
Capacitance: 5pF max.
Circuit: Single pole single throw
MECHANICAL
Mechanical life: 2000 operations per cycle switch
Operation Force: 600gf max.
Stroke: 0.9mm
Operation Temp: -25° C to +70° C
Storage Temp: -40° C to +85° C
Vibration Test: MIL-STD-202F METHOD 201A
Frequency: 10-55-10Hz/1 min
Directions: X, Y, Z, three mutually
perpendicular directions.
Time: 2 hours each direction.
High reliability.
Shock Test: MIL-STD-202F METHOD 213B.
CONDITION A
GRAVITY: 50G (peak value), 11 m/sec.
Direction and times: 6 sides and three times in
each direction. High reliability.
SOLDERING AND CLEANING PROCESSES
For best results, please follow these recommendations: Keep all
switch contacts in their "OFF" position for all operations.
WAVE SOLDERING: Recommended solder temperature at 500 F
(260° C) max. 5 seconds.
HAND
Use a soldering iron of 30 watts, controlled at
608 F(320° C) approximately 2 seconds while
applying solder.
SOLDERING:
CLEANING PROCESS: Flux clean using force rinse, high agitation
or triple bath cleaning method. Freon TF
or TE give excellent results. When vapor
methods are used, do not subject the
switch to solvents at temperatures above
125 F (51° C).
Example: RI-08G-S is a Machine Insertable Type Dip Switch,
Raised Actuator 8 position, splay terminal.
PACKING All DIP switches are shipped in standard IC tubes with
all poles in "OFF" position.
DB LECTRO Inc. 3755 Place Java, Suite 140, Brossard, Québec, J4Y 0E4, Canada - T: 1-450-444-1424 / F: 1-450-444-4714 / www.dblectro.com
相关型号:
©2020 ICPDF网 联系我们和版权申明