RP-05 [DBLECTRO]
Piano Type Dip Switch; 钢琴式DIP开关型号: | RP-05 |
厂家: | DB LECTRO INC |
描述: | Piano Type Dip Switch |
文件: | 总3页 (文件大小:281K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
P.C.B. LAYOUT
RPL & RP CONSTRUCTION
RPL series
RP series
1. Terminal plating by gold gives excellent results when
soldering.
2. RPL series (raised actuator) and RP series (recessed
actuator)
3. Low contact resistance, and self-clean on contact area.
4. Double contacts offer high reliability.
5. All materials are UL94V-0 grade fire retardant plastics.
ITEM Description
Materials
Treatment
White
Blue, Red, Black
Black
Gold Plating
Black
1
2
3
4
5
Actuator
Cover
Base
Terminal
Potting
UL94V-0 PBT
UL94V-0 PBT
UL94V-0 PBT
Phosphor bronze
Epoxy
DB LECTRO Inc. 3755 Place Java, Suite 140, Brossard, Québec, J4Y 0E4, Canada - T: 1-450-444-1424 / F: 1-450-444-4714 / www.dblectro.com
MODEL
CIRCUIT DIAGRAM
PROD NO.
RPL/RP-02
RPL/RP-03
RPL/RP-04
RPL/RP-05
RPL/RP-06
RPL/RP-08
RPL/RP-10
RPL/RP-12
NO. OF POS
DIM A
6.26
9.06
11.34
13.88
16.42
21.5
26.58
31.60
02
03
04
05
06
08
10
12
0.246
0.357
0.446
0.546
0.646
0.846
1.046
1.244
TERMINAL TYPE
HOW TO ORDER
SPECIFICATION
ELECTRICAL
Electrical life: 2000 operation cycles per switch 24VDC, 25mA.
Non-Switching Rating: 100mA, 50 VDC
Switching Rating: 25mA, 24VCD.
Contact resistance: (a) 50mΩ max. at initial
(b) 100mΩ max. after life test.
Insulation resistance: 100MΩ min. (at 500VDC)
Dielectric Strength: 500VAC/1 minute.
Capacitance: 5pF max.
Circuit: Single pole single throw.
MECHANICAL
Mechanical life: 2000 operations per cycle switch
Operation Force: 400gf max.
Stroke: 2.0mm
Operation Temp: -25° C to +70° C
Storage Temp: -40° C to +85° C
Vibration Test: MIL-STD-202F METHOD 201A
Frequency: 10-55-10Hz/1 min
Directions: X, Y, Z, three mutually
perpendicular directions.
Time: 2 hours each direction.
High reliability.
Shock Test: MIL-STD-202F METHOD 213B.
CONDITION A
Example: RPL-08-B-T is a Piano Type Dip Switch, Long key, 8
GRAVITY: 50G (peak value), 11 m/sec.
Direction and times: 6 sides and three times in
each direction. High reliability.
position with top tape sealed.
PACKING All Dip Switches are shipped in standard IC tubes with
all poles in "OFF" position.
SOLDERING AND CLEANING PROCESSES
For best results, please follow these recommendations: Keep all
switch contacts in their "OFF" position for all operations.
DB LECTRO Inc. 3755 Place Java, Suite 140, Brossard, Québec, J4Y 0E4, Canada - T: 1-450-444-1424 / F: 1-450-444-4714 / www.dblectro.com
WAVE SOLDERING: Recommended solder temperature at 500 F
(260° C) max. 5 seconds.
HAND SOLDERING: Use a soldering iron of 30 watts, controlled
at 608 F(320° C) approximately 2 seconds
while applying solder.
CLEANING PROCESS: Flux clean using force rinse, high agitation
or triple bath cleaning method. Freon TF
or TE give excellent results. When vapor
methods are used, do not subject the
switch to solvents at temperatures above
125 F (51° C).
DB LECTRO Inc. 3755 Place Java, Suite 140, Brossard, Québec, J4Y 0E4, Canada - T: 1-450-444-1424 / F: 1-450-444-4714 / www.dblectro.com
相关型号:
©2020 ICPDF网 联系我们和版权申明