P6KE9.1A [DCCOM]
TECHNICAL SPECIFICATIONS OF TRANSIENT VOLTAGE SUPPRESSOR; 瞬态电压抑制器技术规格
| 型号： | P6KE9.1A |
| 厂家： | 
DC COMPONENTS |
| 描述： | TECHNICAL SPECIFICATIONS OF TRANSIENT VOLTAGE SUPPRESSOR |
| 文件： | 总4页 (文件大小：1394K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
P6KE6.8
THRU
DC COMPONENTS CO., LTD.
RECTIFIER SPECIALISTS
R
P6KE440CA
TECHNICAL SPECIFICATIONS OF TRANSIENT VOLTAGE SUPPRESSOR
VOLTAGE RANGE - 6.8 to 440 Volts
PEAK PULSE POWER - 600 Watts
FEATURES
* Glass passivated junction
* 600 Watts Peak Pulse Power capability on
10/1000 µs waveform
* Excellent clamping capability
* Low zener impedance
* Fast response time
DO-15
MECHANICAL DATA
* Case: Molded plastic
* Epoxy: UL 94V-0 rate flame retardant
* Lead: MIL-STD-202E, Method 208 guaranteed
* Polarity: Color band denotes positive end (cathode)
except bidirectional types
* Mounting position: Any
* Weight: 0.4 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load,
For capacitive load, derate current by 20%.
Dimensions in inches and (millimeters)
DEVICES FOR BIPOLAR APPLICATIONS
For Bidirectional use C or CA suffix (e.g. P6KE6.8C, P6KE440CA)
Electrical characteristics apply in both directions
SYMBOL
VALUE
UNITS
Watts
Peak Pulse Power Dissipation on 10/1000 µs waverform
(Note1,FIG.1)
P
PPM
Minimum 600
Steady State Power Dissipation at TL
= 75oC
P
I
M (AV)
FSM
5.0
Watts
Amps
Lead Lengths .375*( 9.5 mm ) ( Note 2 )
Peak Forward Surge Current, 8.3ms single half sine-wave
superimposed on rated load( JEDEC Method ) ( Note 3 )
100
Maximum Instantaneous Forward Voltage at 50A for Unidirectional
Only
3.5/6.5
Volts
0 C
V
F
Operating and Storage Temperature Range
T
J
, TSTG
-65 to + 175
NOTES : 1. Non-repetitive current pulse, per Fig.3 and derated above T
A
= 25oC per Fig.2.
2. Mounted on Copper Leaf area of 1.6 X 1.6"(40X40 mm) per Fig. 5
3. 8.3ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum.
4. V
F
= 3.5V max. for devices of V(BR
)
200V and V
F
= 6.5V for devices of V( BR) > 200V.
172
EXIT
BACK
NEXT
RATING AND CHARACTERISTIC CURVES ( P6KE6.8 THRU P6KE440CA )
DC COMPONENTS CO., LTD.
R
173
EXIT
BACK
NEXT
P6KE (600W) SERIES TRANSIENT VOLTAGE SUPPRESSORS
DC COMPONENTS CO., LTD.
R
174
EXIT
BACK
NEXT
P6KE (600W) SERIES TRANSIENT VOLTAGE SUPPRESSORS
1.VBR measured after IT applied for 300µs. IT= Square Wave Pulse or equivalent.
2.For bidirectonal use C or CA suffixs for all types (ex. P6KE6.8C, P6KE440CA).
electrical characteristics apply in both directions.
NOTES :
3.For bidirectional types having VWM of 10 volts and less, the ID limit is doubled.
DC COMPONENTS CO., LTD.
R
175
EXIT
BACK
NEXT
相关型号：
P6KE9.1A-13
Trans Voltage Suppressor Diode, 600W, 7.78V V(RWM), Unidirectional, 1 Element, Silicon, DO-15
DIODES
P6KE9.1A-54
Trans Voltage Suppressor Diode, 600W, 7.78V V(RWM), Unidirectional, 1 Element, Silicon, DO-15, PLASTIC, DO-214AC, 2 PIN
VISHAY
P6KE9.1A-73
Trans Voltage Suppressor Diode, 600W, 7.78V V(RWM), Unidirectional, 1 Element, Silicon, DO-15, PLASTIC, DO-214AC, 2 PIN
VISHAY
P6KE9.1A-73-E3
DIODE 600 W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-15, PLASTIC, DO-214AC, 2 PIN, Transient Suppressor
VISHAY
P6KE9.1A-E3/23
Trans Voltage Suppressor Diode, 600W, 7.78V V(RWM), Unidirectional, 1 Element, Silicon, DO-204AC, ROHS COMPLIANT, PLASTIC, DO-15, 2 PIN
VISHAY
P6KE9.1A-E3/4
Trans Voltage Suppressor Diode, 600W, 7.78V V(RWM), Unidirectional, 1 Element, Silicon, DO-204AC, ROHS COMPLIANT, PLASTIC, DO-15, 2 PIN
VISHAY
P6KE9.1A-E3/54
DIODE 600 W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-204AC, ROHS COMPLIANT, PLASTIC, DO-15, 2 PIN, Transient Suppressor
VISHAY
©2020 ICPDF网 联系我们和版权申明