SMBJ70 [DCCOM]

TECHNICAL SPECIFICATIONS OF SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR; 表面贴装瞬态电压抑制器技术规格


型号：	SMBJ70
厂家：	DC COMPONENTS
描述：	TECHNICAL SPECIFICATIONS OF SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR 表面贴装瞬态电压抑制器技术规格
文件：	总4页 (文件大小：1597K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

SMBJ5.0

THRU

DC COMPONENTS CO., LTD.

RECTIFIER SPECIALISTS

SMBJ170CA

TECHNICAL SPECIFICATIONS OF SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

VOLTAGE RANGE - 5.0 to 170 Volts

PEAK PULSE POWER - 600 Watts

FEATURES

* Ideal for surface mounted applications

* Glass passivated junction

* 400 Watts Peak Pulse Power capability on

10/1000 µs waveform

* Excellent clamping capability

* Low zener impedance

SMB (DO-214AA)

* Fast response time

.083(2.11)

.075(1.91)

MECHANICAL DATA

* Case: Molded plastic

.185(4.70)

.160(4.06)

* Epoxy: UL 94V-0 rate flame retardant

* Terminals: Solder plated, solderable per

MIL-STD-750, Method 2026

* Polarity: Indicated by cathode band except Bidirectional types.

* Mounting position: Any

* Weight: 0.093 gram

.060(1.52)

.030(0.76)

.008(.203)

.002(.051)

.220(5.59)

.200(5.08)

MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS

Ratings at 25 ^oC ambient temperature unless otherwise specified.

Single phase, half wave, 60 Hz, resistive or inductive load,

For capacitive load, derate current by 20%.

Dimensions in inches and (millimeters)

DEVICES FOR BIPOLAR APPLICATIONS

For Bidirectional use C or CA suffix (e.g. SMBJ5.0C, SMBJ170CA)

Electrical characteristics apply in both directions

SYMBOL

VALUE

Minimum 600

5.0

UNITS

Watts

PPM

Peak Pulse Power Dissipation on 10/1000 µs waveform (Note1)

Steady State Power Dissipation (Note 2)

(AV)

Peak Forward Surge Current 8.3mS single half sine-wave

superimposed on rated load (JEDEC Method) (Note 3)

FSM

Amps

⁰C

100

, TSTG

-55 to + 150

Operating and Storage Temperature Range

NOTES : 1. Non-repetitive current pulse, per Fig.3 and derated above T

= 25^oC per Fig.2.

2. Mounted on 0.2 X 0.2" ( 5.0 X 5.0mm ) copper pad to each terminal.

3. 8.3ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum.

352

EXIT

BACK

RATING AND CHARACTERISTIC CURVES ( SMBJ5.0 THRU SMBJ170CA )

DC COMPONENTS CO., LTD.

353

EXIT

BACK

SMBJ (600W) SERIES TRANSIENT VOLTAGE SUPPRESSORS

DC COMPONENTS CO., LTD.

354

EXIT

BACK

SMBJ (600W) SERIES TRANSIENT VOLTAGE SUPPRESSORS

NOTES : 1.VBR measured after IT applied for 300µs. IT = Square Wave Pulse or equivalent.

2.For bidirectonal use C or CA suffixs for all types (ex. SMBJ5.0C, SMBJ170CA).

electrical characteristics apply in both directions.

3.For bidirectional types having VWM of 10 volts and less, the ID limit is doubled.

DC COMPONENTS CO., LTD.

355

EXIT

BACK