CE02-6A24-10SZ [DDK]
MIL Series Connector;
| 型号： | CE02-6A24-10SZ |
| 厂家： | 
DDK LTD. |
| 描述： | MIL Series Connector 连接器 |
| 文件： | 总8页 (文件大小：320K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
CE02-2A Series
Moistureproof Receptacle Type Conforming to MIL-C-5015
DDK's CE02-2A series provides a set of vibration-
resistant, moistureproof, and oilproof receptacle
connectors. This series uses synthetic rubber for
-
its front inserts to cope with the various environ
ments in which industrial machines are installed.
The products in the CE02-2A series are compatible
with those in the DMS series and comply to MIL-C-
5015. They prevent the entry of water moisture,
cutting oil, and other foreign matter into machines
where these connectors are employed, helping
enhance the reliability of the machines. Typically,
their best applications are in servo motors, machine
tools, and equipment relating to factory automation
as well as in extremely dusty environments. For plug
-
connectors to mate with these receptacle connec
tors, DDK recommends that you use the CE02-6A
series or the DMS (D190) series available from DDK.
FEATURE
●The products in the CE02-2Ａ series are interchangeable with those in the DMS series, because both
are indentical in installation dimensions.
●The inserts are of a three-piece design. Their contacts will not break when used under normal operating
conditions.
●The inserts, which are made of silicone rubber, may be used at temperature of up to 125℃
●Coupling a receptacle connector in the CE02-2A series with a plug connector in the CE02-6A series or
the DMS (D190) series allows the entire joint between the two connectors to be moistureproof.
MATERIAL/FINISH
Shell
Aluminum alloy/Zinc plating, Olive drab chromate finish
Silicone rubber
Front insert
Middle insert PPS resin
Rear insert
Contact
PPS resin
Copper alloy/Silver plating
Flange gasket Silicone rubber
●ꢀ1 ●
<BACK NEXT>
MENU
CE02-2A Series
Wire Size
Contact Size
AWG
#16
#12
#8
#16-#22
#12-#14
#8-#10
SPECIFICATION
Contact size
Max.value/Per contact
AC (rms)
#16
13A
#12
23A
#8
Current rating
Voltage rating
26A
250V
350V
350V
500V
350V
500V
DC
Dielectric withstanding voltage AC (rms), 1minute
1,000V 1,500V 1,500V
5mΩ max.
Contact resistance
less than mΩ
Operating temperature
－40℃ to ＋125℃
2
●ꢀ ●
<BACK NEXT>
MENU
CE02-2A Series
Insert Arrangements
The inserts in the CE02-2A series are indentical to those in the DMS series. Only the pin inserts
are shown below.
InsertNo.
18-10
18-12
20-15
22-22
F
A
L
F
A
B
C
D
A
B
M
E
D
A
G
N
P
E
T
D
B
Arrangements
K
B
C
E
S
H
R
J
C
C
F
D
G
#16-6
#12-4
#12-7
#16-17
InsertNo.
22-14
22-22
22-23
24-10
L
A
G
M
V
F
A
B
D
A
C
N
U
K
A
B
D
C
F
Arrangements
B
J
T
P
C
H
D
B
E
G
C
E
H
S
R
E
D
G
F
#12-8
#8-4
#8-7
#16-19
Note : Each of the inserts in the CE02 series is viewed from its coupling side; all keys are set at their standard
positions.
Alternate Insert Positions
Non-standard key positionsθ
Contact Size/
No of Contact
Insert No.
W
X
120°
－
X
Z
θ=120゜
18-10P
18-12P
20-15P
20-29P
22-14P
22-22P
22-23P
24-10P
#12/4
#16/6
#12/7
#16/17
#16/19
#8/4
－
240°
－
－
80°
80°
80°
80°
－
280°
280°
280°
280°
－
－
－
－
－
110°
110°
－
250°
250°
250°
－
#12/8
#8/7
35°
80°
－
－
280°
Front View of Pin Insert
(for Model CE2-2A18-10P□)
When more than one connector (of the same model ) is used in a single device, the key positions
should be changed as shown in order to prevent the wrong connectors from being coupled
together.
●ꢀ ●
3
<BACK NEXT>
MENU
CE02-2A Series
Unit : mm
CE02-2Ａ20-29PWS
SHELL STYLE
FLANGE GASKET
Omit : Less Gasket
S : With Gasket
2A : Receptacle
SHELL SIZE
18, 20, 22, 24
ALTERNATE INSERT POSITION
Omit : Standard position.
W,X,Y,Z : Altenate position.
INSERT ARRANGEMENT
See page 3
CONTACT STYLE
P : Pin
F max.
A
+0.25
-0.12
H
B
φL
D
J±0.15
□K
C
Threads
A
Part Number
B
C
D
F
G
H
J
K
L
CE02-2A18-10P
13.8
11.5
13.8
11.5
11.5
16.9
13.8
1
1 / -18UNEF-2A
19.2
3.35
7.44
25.4
15.88 26.97
15.88 29.36
34.9
3.05
8
CE02-2A18-12P
CE02-2A20-15P
CE02-2A20-29P
CE02-2A22-14P
CE02-2A22-22P
CE02-2A22-23P
1
1 / -18UNEF-2A
19.2
3.35
7.44
28.6
38.1
3.05
4
3
1 / -18UNEF-2A
19.2
20.8
3.35
3.35
7.44
7.44
31.8
34.9
15.88 31.75
15.88 34.93
41.3
44.4
3.05
3.73
8
1
CE02-2A24-10P
1 / -18UNEF-2A
15.4
2
4
●ꢀ ●
<BACK NEXT>
MENU
CE02-6A Series
Moistureproof Plug Type
Conforming to MIL-C-5015 and JIS-B-6015
The CE02 series circular connectors are designed
to protect connections to electrical equipment
from moisture, oil and surges in current which may
damage electronic circuitry. The CE02 series is
intermateable with MIL- C-5015 style connectors
such as the DMS series available from DDK.
APPLICATION
-
Factory automation equipment, machines, electri
calequipment in industrial outside applications
where :
●Electrical connection must be protected against
exposure to moisture, oil, or dust.
●The equipment contains electronic circuits
which need to be protected by a first-make,
last-break contact.
FEATURE
●First-make, last-break contact to prevent damage to electronic circuitry.
●Intermateable with MIL-C-5015 style connectors commonly used on existing factory automation and
other electrical equipment.
●Designed to offer protection against moisture and oil. A gasket located between the coupling ring and
receptacle shell seals the connection. Available water resistant backshells and cable clamps complete
the sealed connection. Plug connector is also designed to accept conduit fittings. When used in this
method and mated to DDK's CE02-2A series connectors, the entire connection system from the cable to
the inside of the equipment is sealed from moisture, oil, and dust.
MATERIAL/FINISH
Shell
Aluminum alloy/Zinc plating,Olive drab chromate finish
Coupling ring Aluminum alloy/Zinc plating, Olive drab chromate finish
Insert
Diallyl phthalate/Blue
Contact
Copper alloy/Silver plating
Retaining ring Copper alloy/Zinc plating, Olive drab chromate finish
Ground lug
Gasket
Copper alloy/Silver plating
Nitrile butadiene rubber/Black
●ꢀ ●
1
<BACK NEXT>
MENU
CE02-6A Series
Wire Size
Contact Size
Wire Size
#16
#12
#8
AWG#16-#22
AWG#12-#14
AWG#8-#10
Specification
Contact size
Max.value per contact
Service rating
AC (rms)
#16
13A
#12
23A
#8
Current rating
Voltage rating
46A
A
D
500V
700V
900V
1250V
2800V
DC
Withstanding voltage
Insulation resistance
AC (rms)
2000V
More than 5000MΩ at 500V DC
Contact size
#16
#12
3
#8
Contact resistance
less than mΩ
Test current
6
13A
2
23A
46A
Operating temperature
－55℃ to ＋125℃
Alternate Insert Positions
Insert
Contact size/
Number
W
X
Y
Z
No.
10SL-3
18-10
18-12
20-15
20-29
22-14
22-22
22-23
24-10
#16/3
#12/4
#16/6
#12/7
#16/17
#16/19
#8/4
－
－
120°
－
－
240°
－
－
－
－
W
X
Z
80°
80°
80°
80°
－
280°
280°
280°
280°
－
－
－
Y
－
－
－
－
110°
－
250°
250°
－
#12/8
#8/7
35°
80°
－
－
280°
Front View of Socket Insert
2
●ꢀ ●
<BACK NEXT>
MENU
CE02-6A Series
Insert Arrangements
Insert No.
Arrangements
Contact Size
10SL-3
18-10
18-12
20-15
20-29
F
A
F
A
M
B
L
C
A
E
A
D
C
A
B
C
G
N
E
B
T
K
P
D
B
D
B
S
H
R
J
E
F
C
C
D
G
#16
3
#12
4
#16
6
#12
7
#16
17
N
No. of
Contacts
Grounding
C
Terminal
D
Terminal
D
Terminal
D
Terminal
Contact Position
Terminal
Service Rating
A
A
Ａ
A
A
Current
Capacity
13A (29.4A)
23A (62.5A)
13A (43.6A)
23A (83.7A)
13A (81.7A)
Insert No.
22-14
22-22
22-23
24-10 (D)
24-10 (G)
A
L
G
M
A
B
D
F
A
F
K
A
U
N
R
A
B
F
D
C
C
B
J
Arrangements
Contact Size
P
T
H
D
V
E
G
E
G
B
E
B
H
S
C
E
F
G
D
D
C
C
#16
19
N
#8
4
#12
8
#8
7
#8
7
No. of
Contacts
Grounding
D
D
D
G
Contact Position
Terminal
Terminal
Terminal
Terminal
Terminal
D (H), A
(Others)
Service Rating
A
A
A
A
Current
Capacity
13A (88.9A)
46A (125.1A)
23A (90.1A)
46A (167.4A)
46A (167.4A)
3
●ꢀ ●
<BACK NEXT>
MENU
CE02-6A Series
Unit : mm
CE02-6A18-12DSW
SHELL STYLE
ALTERNATE INSERT POSITION
6A : Straight Plug
Omit : Standard position
W,X,Y,Z : Alternate position
SHELL SIZE
10SL, 18, 20, 22, 24
CONTACT STYLE
S : Socket
INSERT ARRANGEMENT
See page 3
PREMATING CONTACT POSITION
Refer to insert arrangements
A
Gasket
E
D
C
H max
Shell Coupling Threads
Rear Threads
D
B
C
Size
A
E
G
5
9
10SL / -24UNEF
22.22 23.30 / -24UNEF-2A
7.50
12.5
8
16
1
18
20
22
24
1 / -18UNEF
34.13 33.72 1-20UNEF-2A
11.74
12.16
12.15
13.42
23.5
26.8
29.9
32.9
8
1
1
1 / -18UNEF
37.28 34.11 1 / -18UNEF-2A
4
8
3
1
1 / -18UNEF
40.48 34.11 1 / -18UNEF-2A
8
4
1
3
1 / -18UNEF
43.67 36.58 1 / -18UNEF-2A
2
8
Contact Size
#8 #8 (shell size 24)
10.0 8.5
#16
7.0
#12
7.5
H
4
●ꢀ ●
<BACK NEXT>
MENU
相关型号：
CE0201-222-Z016VB
Ceramic Capacitor, Multilayer, Ceramic, 16V, 80% +Tol, 20% -Tol, Y5V, -82/+22ppm/Cel TC, 0.0022uF, 0201,
RCD
CE0201-330-G025GCW
Ceramic Capacitor, Multilayer, Ceramic, 25V, 2% +Tol, 2% -Tol, C0G, -/+30ppm/Cel TC, 0.000033uF, 0201,
RCD
CE0201-330-G025GT
Ceramic Capacitor, Multilayer, Ceramic, 25V, 2% +Tol, 2% -Tol, C0G, -/+30ppm/Cel TC, 0.000033uF, 0201,
RCD
CE0201-470-F025GC
Ceramic Capacitor, Multilayer, Ceramic, 25V, 1% +Tol, 1% -Tol, C0G, -/+30ppm/Cel TC, 0.000047uF, 0201,
RCD
CE0201-470-G025GCS
Ceramic Capacitor, Multilayer, Ceramic, 25V, 2% +Tol, 2% -Tol, C0G, -/+30ppm/Cel TC, 0.000047uF, 0201,
RCD
CE0201-470-J025GC
Ceramic Capacitor, Multilayer, Ceramic, 25V, 5% +Tol, 5% -Tol, C0G, -/+30ppm/Cel TC, 0.000047uF, 0201,
RCD
CE0201-822-J010XC
Ceramic Capacitor, Multilayer, Ceramic, 10V, 5% +Tol, 5% -Tol, X5R, -/+15ppm/Cel TC, 0.0082uF, 0201,
RCD
CE0201A-181-M025RBQ
Ceramic Capacitor, Multilayer, Ceramic, 25V, 20% +Tol, 20% -Tol, X7R, -/+15ppm/Cel TC, 0.00018uF, 0201,
RCD
CE0201A-182-Z016VTS
Ceramic Capacitor, Multilayer, Ceramic, 16V, 80% +Tol, 20% -Tol, Y5V, -82/+22ppm/Cel TC, 0.0018uF, 0201,
RCD
CE0201A-331-K050RB
Ceramic Capacitor, Multilayer, Ceramic, 50V, 10% +Tol, 10% -Tol, X7R, -/+15ppm/Cel TC, 0.00033uF, 0201,
RCD
CE0201A-561-J025RT
Ceramic Capacitor, Multilayer, Ceramic, 25V, 5% +Tol, 5% -Tol, X7R, -/+15ppm/Cel TC, 0.00056uF, 0201,
RCD
CE0201A-562-Z016VC
Ceramic Capacitor, Multilayer, Ceramic, 16V, 80% +Tol, 20% -Tol, Y5V, -82/+22ppm/Cel TC, 0.0056uF, 0201,
RCD
©2020 ICPDF网 联系我们和版权申明