DVHV2805D-XXX [DELTA]
HIGH RELIABILITY HYBRID DC-DC CONVERTERS; 高可靠性混合式DC -DC转换器型号: | DVHV2805D-XXX |
厂家: | DELTA ELECTRONICS, INC. |
描述: | HIGH RELIABILITY HYBRID DC-DC CONVERTERS |
文件: | 总17页 (文件大小:255K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
HIGH RELIABILITY HYBRID
DC-DC CONVERTERS
DESCRIPTION
FEATURES
•
•
•
High Reliability
Very Low Output Noise
The DVHV series of high reliability DC-DC
converters is operable over the full military (-55 °C to
+125 °C) temperature range with no power derating.
Unique to the DVHV series is a magnetic feedback
circuit that is radiation immune. Operating at a
nominal fixed frequency of 475 kHz, these regulated,
isolated units utilize well controlled undervoltage
lockout circuitry to eliminate slow start-up problems.
Wide Input Voltage Range: 15 to 50 Volts per
MIL-STD-704
Up to 15 Watts Output Power
Radiation Immune Magnetic Feedback Circuit
NO Use of Optoisolators
Undervoltage Lockout
Indefinite Short Circuit Protection
Current Limit Protection
Industry Standard Pinout
High Input Transient Voltage: 80 Volts for 1 sec
per MIL-STD-704A
Radiation Hardened Version Available
Precision Seam Welded or Solder Seal
Hermetic Package
•
•
•
•
•
•
•
•
These converters are designed and manufactured in
a facility qualified to ISO9001 and certified to MIL-
PRF-38534 and MIL-STD-883.
This product may incorporate one or more of the
following U.S. patents:
•
•
5,784,266
5,790,389
5,963,438
5,999,433
6,005,780
6,084,792
6,118,673
•
•
•
Custom Versions Available
Additional Environmental Screening Available
Meets MIL-STD-461C and MIL-STD-461D EMC
Requirements When Used With a DVMC28 EMI
Filter
Flanged and Non-flanged Versions Available.
MIL-PRF-38534 Element Evaluated
Components
•
•
Figure 1 – DVHV2800D / DVHV2800DF DC-DC Converter
(Not To Scale)
Sales Information:
Phone: (425) 353-3010
Fax: (425) 353-4030
11314 4th Avenue
West, Suite 206
Everett, WA 98204
http://www.vpt-inc.com
1X021DSE
E-mail: vptsales@vpt-inc.com
1
SPECIFICATIONS (TCASE = -55°C to +125°C, VIN = +28V ± 5%, Full Load5, Unless Otherwise Specified)
ABSOLUTE MAXIMUM RATINGS
Input Voltage (Continuous)
Input Voltage (Transient, 1 second)
Output Power1
50 VDC
80 Volts
Junction Temperature Rise to Case
Storage Temperature
+15°C
-65°C to +150°C
15 Watts
Lead Solder Temperature (10 seconds)
Weight (Maximum) (Un-Flanged / Flanged)
270°C
Power Dissipation (Full Load, TCASE = +125°C) 11 Watts
(49 / 52) Grams
DVHV2805D
Typ
DVHV2812D
Parameter
Conditions
Units
Max
Min
Max
Min
Typ
STATIC
Continuous
15
28
50
80
15
28
50
80
V
V
INPUT
Voltage4
Transient, 1 sec
Inhibited
-
-
-
-
-
-
6
-
-
6
mA
mA
mAp-p
V
Current
No Load
Full Load5, 20Hz to 10MHz
-
-
90
-
-
90
Ripple Current
Inhibit Pin Input4
-
-
50
-
-
50
0
-
1.5
0
-
1.5
Inhibit Pin Open Circuit Voltage4
9.0
11.0
13.0
14.8
14.5
5.05
5.075
5.075
5.10
15
9.0
11.0
13.0
14.8
14.5
12.12
12.18
12.18
12.24
15
V
UVLO Turn On
UVLO Turn Off4
12.0
-
12.0
-
V
11.0
-
11.0
-
V
+VOUT TCASE = 25°C
4.95
5.0
11.88
12.0
V
+VOUT TCASE = -55°C to +125°C
-VOUT TCASE = 25°C
4.925
5.0
11.82
12.0
V
OUTPUT
Voltage5
4.925
5.0
11.82
12.0
V
-VOUT TCASE = -55°C to +125°C
Total
4.90
5.0
11.76
12.0
V
0
0
0
-
-
-
-
-
-
-
-
-
0
0
0
-
-
-
-
-
-
-
-
-
W
Power3,6
±VOUT Either Output
10.5
2.1
10.5
0.875
40
W
Current3,6
±VOUT Either Output
A
Ripple Voltage
±VOUT Full Load5, 20Hz to 10MHz
+VOUT VIN = 16V to 40V
-VOUT VIN = 16V to 40V
+VOUT 5% Load to Full Load5
-VOUT 5% Load to Full Load5
30
mVp-p
mV
mV
mV
mV
-
20
-
20
Line Regulation
Load Regulation
Cross Regulation
-
200
50
-
200
50
-
-
-
200
-
200
+Load 70%, -Load 30%
-VOUT
-
-
500
-
-
500
mV
+Load 30%, -Load 70%
EFFICIENCY
Full Load5
Overload4
74
-
-
76
-
-
%
W
-
-
-
11
11
500
550
600
-
-
-
-
11
11
500
550
600
-
LOAD FAULT POWER DISSIPATION
Short Circuit
Either Output
-
-
W
CAPACITIVE LOAD4
SWITCHING FREQUENCY
SYNC FREQUENCY RANGE
ISOLATION
-
-
475
-
-
-
475
-
µF
400
500
100
-
400
500
100
-
kHz
kHz
MΩ
kHrs
VH – VL = 5V, DC = 20-80%
500 VDC, TCASE = 25°C
AIF @ TC = 55°C
-
-
MTBF (MIL-HDBK-217F)
413
-
413
-
See notes next page.
1X021DSE
2
SPECIFICATIONS (TCASE = -55°C to +125°C, VIN = +28V ± 5%, Full Load5, Unless Otherwise Specified)
ABSOLUTE MAXIMUM RATINGS
Input Voltage (Continuous)
Input Voltage (Transient, 1 second)
Output Power1
50 VDC
80 Volts
Junction Temperature Rise to Case
Storage Temperature
+15°C
-65°C to +150°C
15 Watts
Lead Solder Temperature (10 seconds)
Weight (Maximum) (Un-Flanged / Flanged)
270°C
Power Dissipation (Full Load, TCASE = +125°C) 11 Watts
(49 / 52) Grams
DVHV2805D
Typ
DVHV2812D
Parameter
Conditions
Units
Max
Min
Max
Min
Typ
DYNAMIC
Load Step Output Transient
Load Step Recovery2
Line Step Output Transient4
Line Step Recovery2, 4
Turn On Delay
±VOUT
±VOUT
±VOUT
-
-
-
-
-
-
-
200
400
600
500
20
-
-
-
-
-
-
-
300
500
900
500
20
mVPK
µSec
mVPK
µSec
mSec
mVPK
Half Load to Full Load
-
300
300
-
-
500
300
-
V
V
IN = 16V to 40V
IN = 0V to 28V
Turn On Overshoot
-
25
-
50
Notes: 1. Dependant on output voltage.
2. Time for output voltage to settle within 1% of its nominal value.
3. Derate linearly to 0 at 135°C.
4. Verified by qualification testing.
5. Half load at +VOUT and half load at –VOUT
.
6. Up to 70% of the total power or current can be drawn from any one of the two outputs.
1X021DSE
3
SPECIFICATIONS (TCASE = -55°C to +125°C, VIN = +28V ± 5%, Full Load5, Unless Otherwise Specified)
ABSOLUTE MAXIMUM RATINGS
Input Voltage (Continuous)
Input Voltage (Transient, 1 second)
Output Power1
50 VDC
80 Volts
Junction Temperature Rise to Case
Storage Temperature
+15°C
-65°C to +150°C
15 Watts
Lead Solder Temperature (10 seconds)
Weight (Maximum) (Un-Flanged / Flanged)
270°C
Power Dissipation (Full Load, TCASE = +125°C) 11 Watts
(49 / 52) Grams
DVHV2815D
Units
Parameter
Conditions
Min
Typ
Max
STATIC
Continuous
15
28
50
80
V
V
INPUT
Voltage4
Transient, 1 sec
Inhibited
-
-
-
-
6
mA
mA
mAp-p
V
Current
No Load
Full Load5, 20Hz to 10MHz
-
-
90
Ripple Current
Inhibit Pin Input4
-
-
50
0
-
1.5
Inhibit Pin Open Circuit Voltage4
9.0
11.0
13.0
14.8
14.5
15.15
15.225
15.225
15.30
15
V
UVLO Turn On
UVLO Turn Off4
12.0
-
V
11.0
-
V
+VOUT TCASE = 25°C
14.85
15.0
V
+VOUT TCASE = -55°C to +125°C
-VOUT TCASE = 25°C
14.775
15.0
V
OUTPUT
Voltage5
14.775
15.0
V
-VOUT TCASE = -55°C to +125°C
Total
14.70
15.0
V
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
W
Power3,6
±VOUT Either Output
10.5
0.7
W
Current3,6
±VOUT Either Output
A
Ripple Voltage
±VOUT Full Load5, 20Hz to 10MHz
+VOUT VIN = 16V to 40V
-VOUT VIN = 16V to 40V
+VOUT 5% Load to Full Load5
-VOUT 5% Load to Full Load5
40
mVp-p
mV
mV
mV
mV
20
Line Regulation
Load Regulation
Cross Regulation
200
50
200
+Load 70%, -Load 30%
-VOUT
-
-
500
mV
+Load 30%, -Load 70%
EFFICIENCY
Full Load5
Overload4
77
-
-
%
W
-
-
-
11
11
500
550
600
-
LOAD FAULT POWER DISSIPATION
Short Circuit
Either Output
-
W
CAPACITIVE LOAD4
SWITCHING FREQUENCY
SYNC FREQUENCY RANGE
ISOLATION
-
-
475
-
µF
400
500
100
-
kHz
kHz
MΩ
kHrs
VH – VL = 5V, DC = 20-80%
500 VDC, TCASE = 25°C
AIF @ TC = 55°C
-
MTBF (MIL-HDBK-217F)
413
-
See notes next page.
1X021DSE
4
SPECIFICATIONS (TCASE = -55°C to +125°C, VIN = +28V ± 5%, Full Load5, Unless Otherwise Specified)
ABSOLUTE MAXIMUM RATINGS
Input Voltage (Continuous)
Input Voltage (Transient, 1 second)
Output Power1
50 VDC
80 Volts
Junction Temperature Rise to Case
Storage Temperature
+15°C
-65°C to +150°C
15 Watts
Lead Solder Temperature (10 seconds)
Weight (Maximum) (Un-Flanged / Flanged)
270°C
Power Dissipation (Full Load, TCASE = +125°C) 11 Watts
(49 / 52) Grams
DVHV2815D
Units
Parameter
Conditions
Min
Typ
Max
DYNAMIC
Load Step Output Transient
Load Step Recovery2
Line Step Output Transient4
Line Step Recovery2, 4
Turn On Delay
±VOUT
±VOUT
±VOUT
-
-
-
-
-
-
-
350
500
900
500
20
mVPK
µSec
mVPK
µSec
mSec
mVPK
Half Load to Full Load
-
500
300
-
V
V
IN = 16V to 40V
IN = 0V to 28V
Turn On Overshoot
-
50
Notes: 1. Dependant on output voltage.
2. Time for output voltage to settle within 1% of its nominal value.
3. Derate linearly to 0 at 135°C.
4. Verified by qualification testing.
5. Half load at +VOUT and half load at –VOUT
.
6. Up to 70% of the total power or current can be drawn from any one of the two outputs.
1X021DSE
5
BLOCK DIAGRAM
D2
PIN 3
+V OUT
C3
Rs3
OUT COM
T1
D1
C2
Rs2
PIN 4
PIN 1
28V IN
L1
C1
PIN 5
-V OUT
IN COM
PIN 10
Q1
VOLTAGE AND
CURRENT
AMPLIFIERS
MAGNETIC
FEEDBACK
UNDER
VOLTAGE
SHUTDOWN
Rs1
PRIMARY
HOUSEKEEPING
SUPPLY
PWM
CONTROL
SECONDARY
HOUSEKEEPING
SUPPLY
INH
PIN 2
SYNC
PIN 9
Figure 2
CONNECTION DIAGRAM
1
9
2
3
4
5
28V IN
+V OUT
OUT COM
-V OUT
SYNC
INH
LOAD
LOAD
+
28 Vdc
-
10
IN COM
Figure 3
1X021DSE
6
INHIBIT DRIVE CONNECTION DIAGRAMS
28V IN
1
2
28V IN
INH
1
2
10K
10K
OPTOISOLATOR
INH
BIAS
BIAS
OPTIONAL
OPTIONAL
CAPACITOR
12V
CAPACITOR
12V
IN COM 10
IN COM 10
Figure 4 – Internal Inhibit Circuit and Recommended Drive
Figure 5 – Isolated Inhibit Drive
(Shown with optional capacitor for turn-on delay)
(Shown with optional capacitor for turn-on delay)
EMI FILTER HOOKUP DIAGRAM
DVMC28 EMI FILTER
DVHV2800D DC-DC CONVERTER
3
1
2
1
28V IN
28V OUT
28V IN
SYNC
INH
+V OUT
9
LOAD
LOAD
28 Vdc
4
5
+
OUT COM
-
2
5
4
10
IN COM OUT COM
3
IN COM
-V OUT
6, 7,8
CASE
Figure 6 – Converter with EMI Filter
1X021DSE
7
EFFICIENCY PERFORMANCE CURVES (TCASE = 25°C, Full Load, Unless Otherwise Specified)
VIN = 16V
VIN = 28V
VIN = 40V
85
80
75
70
65
80
75
70
65
60
55
60
3
3
6
9
12
15
6
9
12
15
Output Power (W)
Output Pow er (W)
Figure 7 – DVHV2805D
Figure 8 – DVHV2812D
Efficiency (%) vs. Output Power (W)
Efficiency (%) vs. Output Power (W)
85
80
75
70
65
60
3
6
9
12
15
Output Pow er (W)
Figure 9 – DVHV2815D
Efficiency (%) vs. Output Power (W)
1X021DSE
8
EMI PERFORMANCE CURVES
(TCASE = 25°C, VIN = +28V ± 5%, Full Load, Unless Otherwise Specified)
Figure 10 – DVHV2800D without EMI Filter
Figure 11 – DVHV2800D with EMI Filter
1X021DSE
9
PACKAGE SPECIFICATIONS (NON-FLANGED, SOLDER SEAL)
TOP VIEW
SIDE VIEW
PIN
FUNCTION
28V IN
1
2
INHIBIT
+V OUT
OUT COM
-V OUT
CASE
3
4
5
6
7
CASE
8
CASE
9
SYNC
10
IN COM
BOTTOM VIEW
Figure 12 – Non-Flanged, Solder Seal Tin Plated Package and Pinout (Not Used for /HB or Higher Screened Products)
(Dimensional Limits are ±0.005” Unless Otherwise Stated)
1X021DSE
10
PACKAGE SPECIFICATIONS (NON-FLANGED, SEAM SEAL)
TOP VIEW
SIDE VIEW
PIN
1
FUNCTION
28V IN
2
INHIBIT
+V OUT
OUT COM
-V OUT
CASE
3
4
5
6
7
CASE
8
CASE
9
SYNC
10
IN COM
BOTTOM VIEW
Figure 13 – Non-Flanged, Seam Seal Package and Pinout
(Dimensional Limits are ±0.005” Unless Otherwise Stated)
1X021DSE
11
PACKAGE SPECIFICATIONS (FLANGED, SOLDER SEAL)
TOP VIEW
SIDE VIEW
PIN
1
FUNCTION
28V IN
2
INHIBIT
+V OUT
OUT COM
-V OUT
CASE
3
4
5
6
7
CASE
8
CASE
9
SYNC
10
IN COM
BOTTOM VIEW
Figure 14 – Flanged, Solder Seal Tin Plated Package and Pinout (Not Used for /HB or Higher Screened Products)
(Dimensional Limits are ±0.005” Unless Otherwise Stated)
1X021DSE
12
PACKAGE SPECIFICATIONS (FLANGED, SEAM SEAL)
TOP VIEW
SIDE VIEW
PIN
1
FUNCTION
28V IN
2
INHIBIT
+V OUT
OUT COM
-V OUT
CASE
3
4
5
6
7
CASE
8
CASE
9
SYNC
10
IN COM
BOTTOM VIEW
Figure 15 – Flanged, Seam Seal Package and Pinout
(Dimensional Limits are ±0.005” Unless Otherwise Stated)
1X021DSE
13
PACKAGE PIN DESCRIPTION
Pin
Function
Description
1
28V IN
Positive Input Voltage Connection
Logic Low = Disabled Output. Connecting the inhibit pin to input common causes
converter shutdown.
2
INHIBIT
Logic High = Enabled Output. Unconnected or open collector TTL.
3
4
+V OUT
OUT COM
-V OUT
CASE
Positive Output Voltage Connection
Output Common Connection
Negative Output Voltage Connection
Case Connection
5
6
7
CASE
Case Connection
8
CASE
Case Connection
9
SYNC
Synchronization Signal
10
IN COM
Input Common Connection
1X021DSE
14
ENVIRONMENTAL SCREENING (100% Tested Per MIL-STD-883 as referenced to MIL-PRF-38534)
Extended
/ES
HB
/HB
Class H
/H
Class K
/K
Standard
(No Suffix)
Screening
MIL-STD-883
Non-
Destructive
Bond Pull
Method 2023
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Internal
Visual
Method 2017, 2032
Internal Procedure
Temperature
Cycling
Method 1010, Condition C
Method 1010, -55°C to 125°C
•
•
Constant
Acceleration
Method 2001, 3000g, Y1 Direction
Method 2001, 500g, Y1 Direction
PIND
Method 2020, Condition A2
Pre Burn-In
Electrical
100% at 25°C
•
•
Method 1015, 320 hours at +125°C
Method 1015, 160 hours at +125°C
96 hours at +125°C
•
•
•
•
Burn-In
•
•
24 hours at +125°C
•
•
Final
Electrical
MIL-PRF-38534, Group A1
100% at 25°C
•
Method 1014, Fine Leak, Condition A
Method 1014, Gross Leak, Condition C
Dip (1 x 10-3)
•
•
•
•
•
•
•
•
Hermeticity
•
•
Radiography
Method 20123
Method 2009
•
•
External
Visual
•
•
•
Notes:
1.
2.
3.
100% R&R testing at –55°C, +25°C, and +125°C with all test data included in product shipment.
PIND test Certificate of Compliance included in product shipment.
Radiographic test Certificate of Compliance and film(s) included in product shipment.
1X021DSE
15
ORDERING INFORMATION
DVHV
28
05
D
F
R
/HB
-
XXX
1
2
3
4
5
6
7
8
(1)
(2)
(3)
Output Voltage
(4)
Nominal Input
Voltage
Product Series
DVHV
Number of Outputs
28
28 Volts
05
12
15
± 5 Volts
D
Dual
± 12 Volts
± 15 Volts
(5)
(6)
Rad-Hard Option2
(7)
Screening Code1,3
(8)
Additional Screening
Code
Package Option
None
F
Non-Flanged
Flanged
None
R
Standard
100 kRad
None
/ES
/HB
/H
Standard
Extended
HB
Class H
Class K
Contact Sales
/K
Notes:
1.
2.
3.
Contact the VPT Inc. Sales Department for availability of Class H (/H) or Class K (/K) qualified products.
VPT Inc. is not currently certified to a DSCC certified radiation hardness assurance program.
VPT Inc. reserves the right to ship higher screened or SMD products to meet lower screened orders at our
sole discretion unless specifically forbidden by customer contract.
Please contact your sales representative or the VPT Inc. Sales Department for more information
concerning additional environmental screening and testing, different input voltage, output voltage,
power requirement, source inspection, and/or special element evaluation for space or other higher
quality applications.
1X021DSE
16
SMD (STANDARD MICROCIRCUIT DRAWING) NUMBERS
Standard Microcircuit
Drawing (SMD)
DVHV2800D Series
Similar Part Number
DVHV2805D/H
DVHV2805DF/H
*T.B.D.
*T.B.D.
*T.B.D.
DVHV2812D/H
DVHV2812DF/H
DVHV2815D/H
DVHV2815DF/H
Do not use the DVHV2800D Series similar part number for SMD product acquisition. It is listed for
reference only. For exact specifications for the SMD product, refer to the SMD drawing. SMD’s can be
downloaded from the DSCC website at http://www.dscc.dla.mil/programs/smcr/. The SMD number
listed above is for MIL-PRF-38534 Class H screening, standard gold plated lead finish, and no RHA
(Radiation Hardness Assurance) level. Please reference the SMD for other screening levels, lead
finishes, and radiation levels.
CONTACT INFORMATION
To request a quotation or place orders please contact your sales representative or the VPT Inc. Sales
Department at:
Phone:
Fax:
(425) 353-3010
(425) 353-4030
E-mail:
vptsales@vpt-inc.com
All information contained in this datasheet is believed to be accurate, however, no responsibility is assumed for possible errors
or omissions. The products or specifications contained herein are subject to change without notice.
1X021DSE
17
相关型号:
©2020 ICPDF网 联系我们和版权申明