ZA-1000-0600-1-PLP-RHS [DH]

Rack and pinion drives;


型号：	ZA-1000-0600-1-PLP-RHS
厂家：	D+H Mechatronic AG
描述：	Rack and pinion drives
文件：	总3页 (文件大小：424K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

ZA Series Rack and pinion drives

ZA-1000-1-PLP-HS

24 V DC

Performance features

Can be used for openings for smoke exhaust; D+H Euro SHEV in

accordance with EN 12101‑2; and for daily ventilation

Drive unit can be changed from left to right

Programmable drive functions and different drive parameters

With motor electronics controlled via microprocessor

Running speed in CLOSED direction decreases to 5 mm/s (passive closing

edge protection)

High‑speed function (HS) for especially fast opening windows in case of

fire (SHEV)

Time‑controlled reversing when an obstacle is detected in the CLOSED

direction (active closing edge protection)

Low current consumption thanks to high efficiency

Option of cable infeed above and below

Potential drive options

100

You can find the explanations for the icons on the last page

We reserve the right to make changes.

Pressure load diagram

Dimensions

All specifications in mm

Permanent

1000

800

600

400

200

104

160

Ø6

500

700

900

Stroke

1100

1300

1500

Technical data

Approvals / Certiﬁcates

Find out about permission details from your D+H Partner

Supply

24 V DC / 15 ꢀ / 2ꢁ2 ꢂ

30 ꢀ

Duty cycle

EN 12101-2

Force of pressure

Tensile force

1000 N

G 500001

1000 N

Nominal locking force

Service life

1100 N

20000 double strokes *

7ꢁ1 mm/s

Article also available with the following permissions under other article

numbers. Technical data may deviate.

OPEN running speed

OPEN running speed ‑ HS

CLOSED running speed

Type of protection

Emission sound pressure level

Temperature range

Fire resistance

17 mm/s

7ꢁ1 mm/s

IP 65

Lpꢂ ≤ 70 dB(ꢂ)

‑5 °C ꢁꢁꢁ +75 °C

B300 (30 min / 300 °C)

ꢂluminium / Polycarbonate

Powder‑coated

Housing

Surface

Colour

White aluminium (~ RꢂL 9006)

2ꢁ5 m silicone cable

Connection

* For vertical use, please consult with D+H Sales!

Design

Type

ꢂrtꢁ Noꢁ

Stroke

Dimension ꢂ

Weight

Remark

Zꢂ‑1000‑0600‑1‑PLP‑R HS

Zꢂ‑1000‑0800‑1‑PLP‑R HS

Zꢂ‑1‑PLP

27ꢁ006ꢁ30

27ꢁ006ꢁ35

27ꢁ005ꢁ00

600 mm

800 mm

762 mm

962 mm

2ꢁ10 kg

2ꢁ40 kg

Without holes on bottom, only for topside mounting

Variable equipment possible

Brackets are not included and have to be ordered separately.

Status 01/2018

HS “High‑Speed”

In the case of SHEV, the high‑speed function is used for reliably reaching the defined end position in 60 s. In daily ventilation mode, the drive runs

quietly and quickly, as usual.

Function programming

Option for customised configuring of drive parameters (e.g. stroke) via software and associated service tools for drives equipped with PLP, BSY or

BSY+ electronics.

BRV signal

Acknowledgement from the drive, via a control cable, to confirm that it has been completely extended or retracted. When used with the AT 41

and ERM 44 modules, this signal is sent to the central building control system, the modules themselves, or to the lock drive. The BRV signal is not

isolated.

ACB (Advanced Communication Bus)

ACB

Enables direct bus communication between the controller and the drive for, for example, control with perfect positioning or drive feedback. Com‑

munication is via the open source Modbus protocol, and it enables the drive to be combined with an ACB‑capable control panel or enables it to be

directly connected to higher‑level controllers such as a building management system.

BSY+ (synchronisation of drives)

BSY

In addition to providing the same synchronisation function as BSY, BSY+ enables different components in the window to communicate with each

other. For example, the chain drives, during synchronous operation, or the window and lock drives (e.g. FRA 11 BSY+ or VLD‑BSY+).

SGI signal (position reporting)

100

In combination with the D+H servo plug‑in unit SE 622, the drives can be controlled with perfect positioning.

SKS (closing edge protection)

Drive option, which enables an anti‑trap strip or presence detector to be connected directly to the drive (terminal resistor 5.6 kΩ).

Audible signal (corresponding to protection class)

AS2 corresponding to “Protection class 2” in accordance with ZVEI risk assessment through an audible warning signal in the “CLOSED” running direc‑

tion. AS3 corresponding to “Protection class 3” in accordance with ZVEI risk assessment, in addition to AS2, stops the drive for 11 s with a remaining

stroke of 28 mm.

End position message (OPEN / CLOSED)

Drive feedback via an integrated isolated switching contact. This happens if the chain / rack and pinion has moved completely out or in.

Mechanical adjustment

Drive option for adjusting the overall length or design (e.g.: centred chain outlet).

TM tandem connecting shaft

Available as an option for rack and pinion drives. The drives are mechanically coupled with the rack and pinion slave units (ZM) with connecting

shafts (VW).

WS (use in swimming pool)

Available as an option for rack and pinion drives to make them suitable for use in swimming pools. The drive is equipped with an A4 rack and pinion,

A4 eyebolt and a gearbox with hardened stainless steel pinion.

W (use outdoors)

Available as an option for rack and pinion drives to make them suitable for outdoor use. The drive is equipped with a pressure release vent (depen‑

ding on installation), condensation protective coating on the electronics and a gearbox with hardened stainless steel pinion.

相关型号：