860-2Y02-002 [DIALIGHT]
SafeSit? LED Signaling for Hazardous Locations; SafeSit ? LED信令危险场所型号: | 860-2Y02-002 |
厂家: | Dialight Corporation |
描述: | SafeSit? LED Signaling for Hazardous Locations |
文件: | 总8页 (文件大小:422K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Application:
Dialight's L864 LED Based Class I, Division 2 certified medium intensity
red beacon was designed to easily interface into existing systems or to
be provided as a red lighting fixture for new installations. The beacon is
used to mark any obstacle that may provide hazards to aircraft
navigation. Versions of this fixture are available in 120VAC or 230VAC.
US Patent # 7,281,821
SafeSite® L-864 Red LED Medium
Intensity Beacon
Mechanical Information:
Container Dimensions: 24” X 24” X 24”
610mm x 610mm x 610mm
Container Weight:
Mounting:
32lbs (12.70 kg)
Electrical specifications:
Current (Amps):
0.4 / 0.2
48 W
Power Consumption:
(nom)
Operating Temp:
Power Factor:
Material:
-40ºF to +133ºF (-40ºC to +55ºC)
> 0.9
Dimensions in Inches [mm]
Housing:
Cast aluminum
Polycarbonate
Certifications & Ratings:
Lens:
w Class I, Div 2, Groups A, B, C, D hazardous environments T5 rated
w ATEX certified, equipment group II (surface industries), category 3
(Zone 2), T4 rated
Accessories (Hardware): Stainless steel
w FAA AC No. 150/5345-43F
w Compliant to: ICAO (Annex 14 - Fourth Edition, July 2004),
DGAC Mexico
w Canadian Aviation Regulation CAR 621.9 (Transport Canada)
w IP66 / NEMA 4X rated
Mounting Information
w ETL Listed in compliance with UL1598 and UL844for use in Class I,
Div 2 hazardous locations
Features & Benefits:
w Uses 90% less energy than an incandescent
w Resistant to shock and vibration
w Lasts years longer than an incandescent
w Flash or steady burn
w 5 year warranty
Order Codes:
Class 1, Div 2 Beacon
D164-B13-001
D264-D13-001
Class I, Div 2 120/230 VAC Beacon
ATEX Beacon
Beacon Bottom View
ATEX 120/230 VAC Beacon
2
www.dialight.com
Application:
LED Based L810 Red Obstruction light certified to meet both the
rigorous FAA requirements for red LED obstruction lights and Class I,
Division 2 for hazardous area lighting locations. It is available in 120VAC
or 230VAC versions and can be ordered as single or dual units.
US Patent # 6,425,678
SafeSite® L-810 Red LED Obstruction Lights
Mechanical Information:
Single Units:
Shield
Shield
Container Dimensions: 16” X 9” X 8”
406mm x 229mm x 203mm
Lens
Assembly
14.77
[375.2]
Container Weight:
Mounting:
7.14 lbs (3.24 kg)
Lens
11.21
[284.6]
REF
11.77
[298.9]
REF
Assembly
14.21
[360.8]
Threaded 1” NPT and 3/4” NPT
bottom hub for mounting
Dual Units:
BI-DIRECTIONAL
WIRE HOUSING
Dual Wire
Housing
Container Dimensions: 22” X 17” X 9”
559mm x 432mm x 229mm
5.79 [147]
REF
15.54
[394.7]
Container Weight:
Mounting:
16.06 lbs (7.28 kg)
Dimensions in Inches [mm]
Threaded 1” NPT and 3/4” NPT
bottom hub for mounting
Certifications & Ratings:
w Class I, Div 2, Groups A, B, C, D hazardous environments T4 rated
w ATEX certified, equipment group II (surface industries), category 3
(Zone 2), T4 rated
w FAA AC No. 150/5345-43F
w Compliant to: ICAO (Annex 14 - Fourth Edition, July 2004),
DGAC Mexico
w Canadian Aviation Regulation CAR 621.9(Transport Canada)
w ETL Listed in compliance with UL1598 and UL844 for use in Class I,
Div 2 hazardous locations
Electrical specifications: (Per Light):
Volt Amps:
44 VA (120 VAC Units)
67 VA (230 VAC Units)
Input Power:
14.5 W (120 VAC Units)
16.0 W (230 VAC Units)
Operating Temp:
Material:
-67ºF to +131ºF (-55ºC to +55ºC)
w IP65 / IP66 / NEMA 4X rated
Features & Benefits:
Housing:
Cast aluminum
Glass
w Uses 90% less energy than an incandescent
w Weather/corrosion resistant lamp assembly and housing
w Resistant to shock and vibration
Lens:
w Available as a single or dual unit
w Unique optically designed lens to enhance LED operation and
provide 360º visibility
Accessories (Hardware): Stainless steel
w Flash or steady burn
w Will withstand wind in excess of 150 mph (240 kph), salt fog
w 5 year warranty
Order Codes:
Class 1, Div 2 Units
ATEX Units
860-2R01-001
860-2R02-001
860-2R01-002
860-2R02-002
Class I, Div 2 120 VAC, Single Unit
Class I, Div 2 230 VAC, Single Unit
Class I, Div 2 120 VAC, Dual Unit
Class I, Div 2 230 VAC, Dual Unit
860-9R01-001
ATEX 120 VAC, Single Unit
ATEX 230 VAC, Single Unit
ATEX 120 VAC, Dual Unit
ATEX 230 VAC, Dual Unit
860-9R02-001
860-9R01-002
860-9R02-002
3
www.dialight.com
Application:
Dialight's steady burn LED Based Class I, Division 2 Visual Signals are used
in a wide range of industries for visual indication in hazardous
environments. Versions of this fixture are available in 120VAC or 230VAC.
US Patent # 6,425,678
SafeSite® 860 Series LED Steady
Burn Visual Signal Lights
Mechanical Information:
Single Units:
Container Dimensions: 16” X 9” X 8”
Shield
Shield
406mm x 229mm x 203mm
Container Weight:
Mounting:
7.14 lbs (3.24 kg)
Lens
Threaded 1” NPT and 3/4” NPT
bottom hub for mounting
Assembly
Lens
Assembly
14.21
[360.8]
14.77
[375.2]
11.21
[284.6]
REF
11.77
[298.9]
REF
Dual Units:
Container Dimensions: 22” X 17” X 9”
559mm x 432mm x 229mm
Dual Wire
Housing
BI-DIRECTIONAL
WIRE HOUSING
Container Weight:
Mounting:
16.06 lbs (7.28 kg)
5.79 [147]
REF
15.54
[394.7]
Threaded 1” NPT and 3/4” NPT
bottom hub for mounting
Dimensions in Inches [mm]
Electrical specifications: (Per Light):
Certifications & Ratings:
w Class I, Div 2, Groups A, B, C, D hazardous environments T4 rated
w ATEX certified, equipment group II (surface industries), category 3
(Zone 2), T4 rated
w IP65 / IP66 / NEMA 4X rated
w ETL Listed in compliance with UL1598 and UL844 for use in Class I, Div
Volt Amps:
44 VA (120 VAC Units)
67 VA (230 VAC Units)
Input Power:
14.5 W (120 VAC Units)
16.0 W (230 VAC Units)
2 hazardous locations
Operating Temp:
Material:
-67ºF to +131ºF (-55ºC to +55ºC)
Features & Benefits:
w Uses 90% less energy than an incandescent
w Weather/corrosion resistant lamp assembly and housing
w Resistant to shock and vibration
w Available as a single or dual unit
w Unique optically designed lens to enhance LED operation and
provide 360º visibility
Housing:
Cast aluminum
Glass
Lens:
Accessories (Hardware): Stainless steel
w 5 year warranty
Order Codes:
Class I, Div 2 - Single Units
Class I, Div 2 - Dual Units
860-2R01-001
860-2W01-001
860-2G01-001
860-2Y01-001
860-2B01-001
860-2R02-001
860-2W02-001
860-2G02-001
860-2Y02-001
860-2B02-001
Class I, Div 2 Red 120 VAC
Class I, Div 2 White 120 VAC
Class I, Div 2 Green 120 VAC
Class I, Div 2 Yellow 120 VAC
Class I, Div 2 Blue 120 VAC
Class I, Div 2 Red 230 VAC
Class I, Div 2 White 230 VAC
Class I, Div 2 Green 230 VAC
Class I, Div 2 Yellow 230 VAC
Class I, Div 2 Blue 230 VAC
860-2R01-002
860-2W01-002
860-2G01-002
860-2Y01-002
860-2B01-002
860-2R02-002
860-2W02-002
860-2G02-002
860-2Y02-002
860-2B02-002
Class I, Div 2 Red 120 VAC
Class I, Div 2 White 120 VAC
Class I, Div 2 Green 120 VAC
Class I, Div 2 Yellow 120 VAC
Class I, Div 2 Blue 120 VAC
Class I, Div 2 Red 230 VAC
Class I, Div 2 White 230 VAC
Class I, Div 2 Green 230 VAC
Class I, Div 2 Yellow 230 VAC
Class I, Div 2 Blue 230 VAC
ATEX versions available - consult factory
4
www.dialight.com
Application:
Dialight’s flat base junction box allows versatility of mounting and
installation. It’s flat bottom base design creates the ability to mount the
visual signal against level surfaces such as walls, ceilings and platforms.
SafeSite® 860 Series LED Visual Signal
Lights w/ Flat Base Junction Box
Mechanical Information:
Container Dimensions: 16” X 9” X 8”
406mm x 229mm x 203mm
Container Weight:
Mounting:
7.14 lbs (3.24 kg)
Threaded 1” NPT on 4 sides and 1
on bottom
Electrical specifications:
Volt Amps:
44 VA (120 VAC Units)
11.34
[288.2]
Input Power:
Operating Temp:
Material:
14.5 W (120 VAC Units)
-67ºF to +131ºF (-55ºC to +55ºC)
2.25
[57.15]
Housing:
Cast aluminum
Glass
Ø 6.60 [167.6]
Lens:
Dimensions in Inches [mm]
Accessories (Hardware): Stainless steel
Certifications & Ratings:
w Class I, Div 2, Groups A, B, C, D hazardous environments (pending)
w IP65 / IP66 / NEMA 4X rated
w ETL Listed in compliance with UL1598 and UL844 for use in Class I, Div
2 hazardous locations
Features & Benefits:
w Uses 90% less energy than an incandescent
w Weather/corrosion resistant lamp assembly and housing
w Resistant to shock and vibration
w Unique optically designed lens to enhance LED operation and
provide 360º visibility
w 5 year warranty
Order Codes:
Class I, Div 2 - Single Units
860-2R01-005
860-2Y01-005
860-2B01-005
Class I, Div 2 Red 120 VAC - Flat Base
Class I, Div 2 Yellow 120 VAC - Flat Base
Class I, Div 2 Blue 120 VAC - Flat Base
5
www.dialight.com
Application:
Dialight's newest addition to their line of Class I, Division 2 Visual Signal
Lights, the FLS Series Flashing Signals are used in a wide range of
industries for visual indication in hazardous environments. Versions of this
fixture are available in 120VAC or 230VAC.
US Patent # 6,425,678
SafeSite® FLS Series LED
Flashing Visual Signal Lights
Shield
Lens
Assembly
Mechanical Information:
Container Dimensions: 16” X 9” X 8”
11.21
[284.6]
REF
11.77
406mm x 229mm x 203mm
[298.9]
REF
Container Weight:
Mounting:
7.14 lbs (3.24 kg)
Threaded 1” NPT and 3/4” NPT
bottom hub for mounting
BI-DIRECTIONAL
WIRE HOUSING
5.79 [147]
REF
Electrical specifications:
Volt Amps:
44 VA (120 VAC Units)
67 VA (230 VAC Units)
Dimensions in Inches [mm]
Certifications & Ratings:
w Class I, Div 2, Groups A, B, C, D hazardous environments T4 rated
w IP66 / NEMA 4X rated
Input Power:
14.5 W (120 VAC Units)
16.0 W (230 VAC Units)
Operating Temp:
Material:
-67ºF to +131ºF (-55ºC to +55ºC)
w ETL Listed in compliance with UL1598 and UL844 for use in Class I, Div
2 hazardous locations
Features & Benefits:
Housing:
Cast aluminum
Glass
w Uses 90% less energy than an incandescent
w Weather/corrosion resistant lamp assembly and housing
w Resistant to shock and vibration
w Available as a single unit
w Unique optically designed lens to enhance LED operation and
provide 360º visibility
w 5 year warranty
Lens:
Accessories (Hardware): Stainless steel
Order Codes:
Class I, Div 2 - Single Units
FLS-2R01-001
Class I, Div 2 Red 120 VAC
Class I, Div 2 White 120 VAC
Class I, Div 2 Green 120 VAC
Class I, Div 2 Yellow 120 VAC
Class I, Div 2 Blue 120 VAC
Class I, Div 2 Red 230 VAC
Class I, Div 2 White 230 VAC
Class I, Div 2 Green 230 VAC
Class I, Div 2 Yellow 230 VAC
Class I, Div 2 Blue 230 VAC
FLS-2W01-001
FLS-2G01-001
FLS-2Y01-001
FLS-2B01-001
FLS-2R02-001
FLS-2W02-001
FLS-2G02-001
FLS-2Y02-001
FLS-2B02-001
ATEX versions available - consult factory
6
www.dialight.com
Application:
Dialight’s flat base junction box allows versatility of mounting and
installation. It’s flat bottom base design creates the ability to mount the
flashing signal against level surfaces such as walls, ceilings and platforms.
SafeSite® FLS Series LED Flashing Signal
Lights w/ Flat Base Junction Box
Mechanical Information:
Container Dimensions: 16” X 9” X 8”
406mm x 229mm x 203mm
Container Weight:
Mounting:
7.14 lbs (3.24 kg)
Threaded 1” NPT on 4 sides and 1
on bottom
Electrical specifications:
Volt Amps:
44 VA (120 VAC Units)
11.34
[288.2]
Input Power:
Operating Temp:
Material:
14.5 W (120 VAC Units)
-67ºF to +131ºF (-55ºC to +55ºC)
2.25
[57.15]
Housing:
Cast aluminum
Glass
Ø 6.60 [167.6]
Lens:
Dimensions in Inches [mm]
Accessories (Hardware): Stainless steel
Certifications & Ratings:
w Class I, Div 2, Groups A, B, C, D hazardous environments (pending)
w IP65 / IP66 / NEMA 4X rated
Features & Benefits:
w ETL Listed in compliance with UL1598 and UL844 for use in Class I, Div
2 hazardous locations
w Uses 90% less energy than an incandescent
w Weather/corrosion resistant lamp assembly and housing
w Resistant to shock and vibration
w Unique optically designed lens to enhance LED operation and
provide 360º visibility
w 5 year warranty
Order Codes:
Class I, Div 2 - Single Units
FLS-2R01-005
FLS-2Y01-005
FLS-2B01-005
Class I, Div 2 Red 120 VAC - Flat Base
Class I, Div 2 Yellow 120 VAC - Flat Base
Class I, Div 2 Blue 120 VAC - Flat Base
7
www.dialight.com
Application:
Dialight's newest addition to their line of Class I, Division 2 Visual Signal
Lights, the FLS Series Flashing Signals are used in a wide range of
industries for visual indication in hazardous environments. The FLS series
incorporates a 4 wire connection for incorporation into a DC supervised
alarm systems.
Mechanical Information:
US Patent # 6,425,678
Container Dimensions: 16” X 9” X 8”
SafeSite® FLS Series LED
406mm x 229mm x 203mm
Flashing Visual Signal Lights
for Supervised Alarm Systems
Container Weight:
Mounting:
7.14 lbs (3.24 kg)
Threaded 1” NPT
Electrical specifications:
Operating Voltage:
Input Power:
12-48 VDC (nom)
1.5 W
Operating Temp:
On:Off Time:
-40°C to +65°C
100:900ms
Certifications & Ratings:
w Class I, Div 2, Groups A, B, C, D hazardous environments T4 rated
w Certified to UL844 / UL1598A / DL1598
w IP66 / NEMA 4X rated
Material:
Housing:
Powder coated cast aluminum
Glass
Features & Benefits:
w Uses 90% less energy than an incandescent
w Weather/corrosion resistant lamp assembly and housing
w Resistant to shock and vibration
w Unique optically designed lens to enhance LED operation and
provide 360º visibility
Lens:
Hardware:
Stainless steel
Included Accessories:
Threaded 3/4” NPT reducer
Threaded 1” NPT plug
Stainless steel cage
w 5 year warranty
Order Codes:
Class I, Div 2 - Single Units
11.18
[289.9]
REF
FLS-2R09-001
FLS-2W09-001
FLS-2G09-001
FLS-2Y09-001
FLS-2B09-001
Red
White
Green
Yellow
Blue
Ø5.79
[147.0]
REF
Dimensions in Inches [mm]
Dialight reserves the right to make changes at any time in order to supply the best product possible.
The most current version of this document will always be available at:
http://www.dialight.com/Assets/Brochures_And_Catalogs/Illumination/MDTFSFSTBROCHURE.pdf
MDTFSFSTBROCHURE_D
8
www.dialight.com
相关型号:
©2020 ICPDF网 联系我们和版权申明