1N6379 [DIGITRON]

Transient Voltage Suppressor, Uni-directional; Max Peak Repetitive Reverse Voltage: 1500; Max TMS Bridge Input Voltage: 22; Max DC Reverse Voltage: 2; Sn/Pb - Pb-free;
1N6379
型号: 1N6379
厂家: Digitron Semiconductors    Digitron Semiconductors
描述:

Transient Voltage Suppressor, Uni-directional; Max Peak Repetitive Reverse Voltage: 1500; Max TMS Bridge Input Voltage: 22; Max DC Reverse Voltage: 2; Sn/Pb - Pb-free

局域网 二极管
文件: 总4页 (文件大小:972K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
1N6373-1N6389  
Transient Voltage Suppressor  
1500 Watt  
High-reliability discrete products  
and engineering services since 1977  
FEATURES:  
Available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number  
Available Non-RoHS (standard) or RoHS compliant (add PBF suffix)  
Unidirectional and bidirectional TVS series for thru-hole mounting  
Suppresses transients up to 1500 watts @ 10/1000 μs  
tclamping (0 volts to V(BR) min):  
Unidirectional – Less than 100 pico seconds  
Bidirectional – Less than 5 nano seconds  
Working voltage (VWM) range 5 V to 45 V  
Low clamping factor (ratio of actual VC/VBR): 1.33 @ full rated power and 1.20 @ 50% rated power  
Economical plastic encapsulated TVS for thru-hole mount  
Surface mount equivalent packages also available  
MAXIMUM RATINGS  
1500 Watts for 10/1000 μs with repetition rate of 0.01% or less* at lead temperature (TL) 25°C (See figures 1, 2, & 4)  
Operating and Storage Temperature:  
Thermal Resistance:  
-65°C to +150°C  
22°C/W junction to lead at  
ambient when mounted on FR4 PC board with 4mm2 copper pads  
and track width 1 mm, length 25mm  
≤ 40°C, or 1.52 watts at T  
A = 25°C when mounted on FR4  
PC board described for thermal resistance  
Steady State Power Dissipation:*:  
Solder Temperatures:  
5 watts at TL  
260°C for 10 s (maximum)  
* TVS devices are not typically used for dc power dissipation and are instead operated at or less than their rated standoff voltage (VWM) except for transients  
that briefly drive the device into avalanche breakdown (VBR to VC region).  
ELECTRICAL CHARACTERISTICS UNIDIRECTIONAL (TA = 25°C)  
Maximum  
Maximum  
Clamping  
Voltage  
Minimum*  
Breakdown  
Voltage @  
Maximum  
Reverse  
Leakage @  
VWM  
Clamping  
Voltage  
Stand-Off  
Voltage  
Maximum  
Peak Pulse  
Current  
(Fig. 2)  
@
Part  
Number  
(Fig. 2)  
(Note 1)  
Direction  
1.0 mA  
lPP1 = 1A  
lPP2 = 10A  
VWM  
VOLTS  
5.0  
lD  
μA  
300  
25  
2
V(BR) (min)  
VOLTS  
6.0  
VC  
VOLTS  
7.1  
VC  
VOLTS  
7.5  
lPP3  
A
1N6373  
1N6374  
1N6375  
1N6376  
1N6377  
1N6378  
1N6379  
1N6380  
1N6381  
1N6382  
1N6383  
Unidirectional  
Unidirectional  
Unidirectional  
Unidirectional  
Unidirectional  
Unidirectional  
Unidirectional  
Unidirectional  
Unidirectional  
Bidirectional  
Bidirectional  
160  
100  
90  
8.0  
9.4  
11.3  
13.7  
16.1  
20.1  
24.2  
29.8  
50.6  
63.3  
11.4  
14.1  
11.5  
14.1  
16.5  
20.6  
25.2  
32.0  
54.3  
70.0  
11.6  
14.5  
10.0  
12.0  
15.0  
18.0  
22.0  
36.0  
45.0  
8.0  
11.7  
14.1  
17.6  
21.2  
25.9  
42.4  
52.9  
9.4  
2
70  
2
60  
2
50  
2
40  
2
23  
2
19  
25  
2
100  
90  
10.0  
11.7  
Rev. 20121016  
1N6373-1N6389  
Transient Voltage Suppressor  
1500 Watt  
High-reliability discrete products  
and engineering services since 1977  
1N6384  
1N6385  
1N6386  
1N6387  
Bidirectional  
Bidirectional  
Bidirectional  
Bidirectional  
12.0  
15.0  
18.0  
22.0  
2
2
2
2
14.1  
17.6  
21.2  
25.9  
16.7  
20.8  
24.8  
30.8  
17.1  
21.4  
25.5  
32.0  
70  
60  
50  
40  
Bidirectional  
Bidirectional  
1N6388  
1N6389  
36.0  
45.0  
2
2
42.4  
52.9  
50.6  
63.3  
54.3  
70.0  
23  
19  
Note 1: TVS devices are normally selected according to the reverse “Stand Off Voltage” (VWM) which should be equal to or greater than dc or continuous peak  
operating voltage level.  
For bidirectional parts, add suffix C at end of the part number.  
*
The minimum breakdown voltage as shown takes into consideration the ±1 volt tolerance normally specified for power supply regulation on most  
integrated circuit manufacturers data sheets. Similar devices are available with reduced clamping voltages where tighter regulated power supply voltages are  
employed.  
MECHANICAL CHARACTERISTICS  
Case  
DO-201  
Marking  
Polarity  
Alpha-numeric  
Cathode band  
Rev. 20121016  
1N6373-1N6389  
Transient Voltage Suppressor  
1500 Watt  
High-reliability discrete products  
and engineering services since 1977  
Rev. 20121016  
1N6373-1N6389  
Transient Voltage Suppressor  
1500 Watt  
High-reliability discrete products  
and engineering services since 1977  
Rev. 20121016  

相关型号:

1N6379E3TR

Trans Voltage Suppressor Diode, 1500W, 22V V(RWM), Unidirectional, 1 Element, Silicon, ROHS COMPLIANT, PLASTIC, CASE 1, 2 PIN
MICROSEMI

1N6379G

1500 Watt Peak Power Mosorb TM Zener Transient Voltage Suppressors
ONSEMI

1N6379RL4

1500 Watt Peak Power Mosorb TM Zener Transient Voltage Suppressors
ONSEMI

1N6379RL4

1500W, UNIDIRECTIONAL, SILICON, TVS DIODE, PLASTIC, CASE 41A-02, 2 PIN
MOTOROLA

1N6379RL4G

1500 Watt Peak Power Mosorb TM Zener Transient Voltage Suppressors
ONSEMI

1N6379TRE3

Trans Voltage Suppressor Diode, 22V V(RWM), Unidirectional,
MICROSEMI

1N6380

1500 Watt Peak Power Mosorb Zener Transient Voltage Suppressors
ONSEMI

1N6380

Zener Transient Voltage Suppressors Unidirectional and Bidirectional
MOTOROLA

1N6380

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR
MDE

1N6380

Zener Transient Voltage Suppressors Unidirectional and Bidirectional
FREESCALE

1N6380

1500 WATT LOW CLAMPING FACTOF TRANSIENT VOLTAGE SUPPRESSO
NJSEMI

1N6380

Trans Voltage Suppressor Diode,
TAITRON