MCR265-6-PBF [DIGITRON]
Silicon Controlled Rectifier;型号: | MCR265-6-PBF |
厂家: | Digitron Semiconductors |
描述: | Silicon Controlled Rectifier |
文件: | 总3页 (文件大小:1884K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MCR265 SERIES
THYRISTORS
High-reliability discrete products
and engineering services since 1977
FEATURES
Available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number.
Available as non-RoHS (Sn/Pb plating), standard, and as RoHS by adding “-PBF” suffix.
MAXIMUM RATINGS.
RATING
SYMBOL
VALUE
UNIT
Peak Reverse Blocking Voltage (1)
MCR265-2
MCR265-4
MCR265-6
MCR265-8
MCR265-10
50
200
400
600
800
VRRM
Volts
Forward Current (TC=70°C)
IT(RMS)
IT(AV)
55
35
Amps
Amps
(All Conduction Angles)
Peak Non-repetitive Surge Current – 8.3 ms
ITSM
(1/2 Cycle, Sine Wave)
550
20
Forward Peak Gate Power
PGM
Watts
Watt
Forward Average Gate Power
PG(AV)
0.5
Forward Peak Gate Current
lGM
Amps
(300μs, 120 PPS)
2.0
Operating Junction Temperature Range
TJ
-40 to +125
°C
°C
Storage Temperature Range
Tstg
-40 to +150
1. VRRM for all types can be applied on a continuous basis. Ratings apply for zero or negative voltage, however, positive gate voltage shall not be applied concurrent with negative potential on
the anode. Blocking voltages shall not be tested with a constant current source such that the voltage ratings of the devices are exceeded.
These devices are rated for use in applications subject to high surge conditions. Care must be taken to ensure proper heat sinking when the device is to be used at high sustained currents.
THERMAL CHARACTERISTICS
CHARACTERISTIC
SYMBOL
RθJC
MAX
0.9
UNIT
°C/W
°C/W
Thermal Resistance, Junction to Case
Thermal Resistance, Junction to Ambient
RθJA
60
ELECTRICAL CHARACTERISTICS
CHARACTERISTIC
SYMBOL
MIN
TYP
MAX
UNIT
Peak Forward Blocking Voltage (TJ = 125°C)
MCR265-2
MCR265-4
MCR265-6
MCR265-8
MCR265-10
50
-
-
-
-
-
-
-
-
-
-
Volts
200
400
600
800
VDRM
Peak forward blocking current
IDRM
IRRM
VTM
mA
mA
(rated VDRM @ TJ = 125°C)
-
-
-
-
-
2.0
2.0
1.9
Peak reverse blocking current
(rated VRRM @ TJ = 125°C)
Forward “on” voltage(1)
Volts
(ITM = 110A)
1.5
Rev. 20130116
MCR265 SERIES
THYRISTORS
High-reliability discrete products
and engineering services since 1977
Gate trigger current (continuous dc)
(Anode voltage = 12Vdc, RL = 100ohms)
(TC = -40°C)
IGT
-
-
20
40
50
90
mA
Gate trigger voltage (continuous dc)
VGT
VGD
Volts
Volts
(Anode voltage = 12Vdc, RL = 100ohms)
-
1.0
-
1.5
-
Gate non-trigger voltage
(Anode voltage = rated VDRM, RL = 100ohms, TJ = 125°C)
0.2
MECHANICAL CHARACTERISTICS
Case:
TO-220AB
Marking:
Pin out:
Body painted, alpha-numeric
See below
Rev. 20130116
MCR265 SERIES
THYRISTORS
High-reliability discrete products
and engineering services since 1977
Rev. 20130116
相关型号:
MCR265-6-T
Silicon Controlled Rectifier, 55A I(T)RMS, 400V V(DRM), 400V V(RRM), 1 Element, TO-220AB
MOTOROLA
MCR265-6-U2
Silicon Controlled Rectifier, 55A I(T)RMS, 400V V(DRM), 400V V(RRM), 1 Element, TO-220, 2 PIN
MOTOROLA
MCR265-6-UA
Silicon Controlled Rectifier, 55A I(T)RMS, 400V V(DRM), 400V V(RRM), 1 Element, TO-220AB
MOTOROLA
MCR265-6-W
Silicon Controlled Rectifier, 55A I(T)RMS, 400V V(DRM), 400V V(RRM), 1 Element, TO-220AB
MOTOROLA
MCR265-6-WC
Silicon Controlled Rectifier, 55A I(T)RMS, 400V V(DRM), 400V V(RRM), 1 Element, TO-220AB
MOTOROLA
©2020 ICPDF网 联系我们和版权申明