AH1803 [DIODES]
MICROPOWER, ULTRA-SENSITIVE HALL EFFECT SWITCH; 微功耗,超灵敏霍尔效应开关型号: | AH1803 |
厂家: | DIODES INCORPORATED |
描述: | MICROPOWER, ULTRA-SENSITIVE HALL EFFECT SWITCH |
文件: | 总7页 (文件大小:127K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
AH1803
MICROPOWER, ULTRA-SENSITIVE HALL EFFECT
SWITCH
General Description
Features
AH1803 is with two Hall effect plates and a CMOS output driver,
mainly designed for battery–operation, hand-held equipment
(such as Cellular and Cordless Phone, PDA). The total operation
power is down to 24uW in the 3V supply.
Either north or south pole of sufficient strength will turn the output
on. The output will be turned off under no magnetic field.
While the magnetic flux density (B) is larger than operate point
(Bop), the output will be turned on (low), the output is held until B
is lower than release point (Brp), then turned off (High).
•
•
•
•
Micropower operation
Operation with North or South Pole
2.4 to 5.5V battery operation
Chopper stabilized
•
•
•
Superior temperature stability
Extremely low switch-point drift
Insensitive to physical stress
•
•
•
Good RF noise immunity
-40°C to 85°C operating temperature
Low profile 3 pin SC59 (commonly known as SOT23 in
Asia) and DFN2020-6 package
•
ESD (HBM) > 4KV for DFN2020-6
•
•
Lead Free Finish / RoHS Compliant (Note 1)
Green Packages: SC59 and DFN2020-6
Applications
•
•
•
Cellular phone
PDA
Cordless phone
Ordering Information
AH1803 - X X X
Package
W : SC59
Packing
Lead Free
G: Green
-7 : Taping
SN : DFN2020-6
Note:
1. RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex Notes 5 and 7.
Packaging
(Note 2)
7” Tape and Reel
Device
Package Code
Quantity
Part Number Suffix
AH1803-W
AH1803-SN
W
SN
SC59
DFN2020-6
3000/Tape & Reel
3000/Tape & Reel
-7
-7
Note:
2. Pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at
http://www.diodes.com/datasheets/ap02001.pdf.
AH1803 Rev. 1
1 of 7
JULY 2007
www.diodes.com
© Diodes Incorporated
AH1803
MICROPOWER, ULTRA-SENSITIVE HALL EFFECT
SWITCH
Pin Description
Name
Vdd
GND
P/I/O
P/I
P/I
Pin #
Description
Power Supply Input
Ground
1
2
3
Output
O
Output Pin
Pin Assignment
SC59
DFN2020-6
3. Output
1. Vdd
NC
3.
Output
GND 2.
1. Vdd
Top view
NC
NC
2. GND
Bottom view
Note:
3. NC is “No Connection”, which is recommended to be tied to ground.
Block Diagram
Vdd
1
Power
switch
Hall Plate
Hall Plate
Latch
Amp
Amp
3
Logical
Out
Latch
2
GND
AH1803 Rev. 1
2 of 7
www.diodes.com
JULY 2007
© Diodes Incorporated
AH1803
MICROPOWER, ULTRA-SENSITIVE HALL EFFECT
SWITCH
Typical Circuit
Vdd
O utput
A H 1803
G nd
Absolute Maximum Ratings (@ TA = 25°C)
Symbol
Characteristics
Values
Unit
Vdd
B
Supply voltage
Magnetic flux density
7
V
Unlimited
TA
Ts
Operating Temperature Range
Storage Temperature Range
-40 to +85
-65 to +150
230
°C
°C
mW
mW
°C
SC59
DFN2020-6
PD
TJ
Package Power Dissipation
230
150
Maximum Junction Temperature
Recommended Operating Conditions (TA = 25°C)
Symbol
Parameter
Supply Voltage
Conditions
Rating
Unit
Vdd
Operating
2.4~5.5
V
AH1803 Rev. 1
3 of 7
www.diodes.com
JULY 2007
© Diodes Incorporated
AH1803
MICROPOWER, ULTRA-SENSITIVE HALL EFFECT
SWITCH
Electrical Characteristics (TA = +25°C, Vdd = 3V; unless otherwise specified)
Symbol
Characteristic
Conditions
Min
Typ
Max
Unit
Vout
Ioff
Output On Voltage
Output Leakage Current Vout = 5.5V, Brpn < B < Brps
Iout =1mA
-
-
-
0.1
<0.1
3
0.3
1
6
V
µA
mA
Chip enable, TA = 25°C, Vdd = 3V
Idd(en)
Idd(dis)
Chip enable, TA = -40~85°C,
-
-
-
3
5
5
9
mA
µA
µA
Vdd = 2.4~5.5V
10
14
Chip disable, TA = 25°C, Vdd = 3V
Chip disable, TA = -40~85°C,
Vdd = 2.4~5.5V
Supply Current
Average supply current,
TA = 25°C, Vdd = 3V
Average supply current,
TA= -40~85°C, Vdd = 2.4~5.5V
-
-
8
8
16
23
µA
µA
Idd(avg)
Tawake Awake Time
Tperiod Period
-
-
-
75
75
0.1
150
150
-
µs
ms
%
D.C.
Duty Cycle
Magnetic Characteristics (TA = 25°C, Vdd = 3V)
(1mT=10 Gauss)
Symbol
Characteristic
Min
Typ
Max
Unit
Bops(south pole to brand side)
Bopn(north pole to brand side)
Brps(south pole to brand side)
Brpn(north pole to brand side)
2
-4
1
3
-3
2
4
-2
-
Operate Point
mT
Release Point
Hysteresis
-
-2
-1
Bhy( Bopx − Brpx )
0.5
1
-
Note:
4. Typical data is at Ta =25°C, Vdd = 3V, and for design information only.
5. Operate point and release point will vary with supply voltage and operating temperature.
Output
Output
( off-state )
( off-state )
Bhy
Vcc
Vcc
Turn off
Turn off
Bhy
Turn on
Turn on
( on-state )
Bopn
( on-state )
Vsat
Vsat
Brpn
0
0
Brps
Bops
( Magnetic flux density B )
( Magnetic flux density B )
AH1803 Rev. 1
4 of 7
www.diodes.com
JULY 2007
© Diodes Incorporated
AH1803
MICROPOWER, ULTRA-SENSITIVE HALL EFFECT
SWITCH
Performance Characteristics
(1) SC59 and DFN2020-6
25
50
60
70
80
85
90
100 110 120 130 140 150
TA (°C)
230 184 166 147 129 120 110
92
74
55
37
18
0
PD (mW)
P ow er D issipation C urve
PD (m W )
300
200
100
0
0
25
50
75
100
125
150
85
。
TA ( C )
Marking Information
(1) SC59
(2) DFN2020-6
(Top View)
(Top View)
Pin 1 indicator
XX
: KD: AH1803
X X
KD : AH1803
Date code
Internal code
: Year 0~9
Y
YMX
XX Y M X
M
: Month A~L
: Internal code
A~Z: Green
X
A~Z: Green Package
M : Month (A~L)
Y : Year
Part Number
AH1803
Package Identification Code
Part Number
Package Identification Code
SC59 KD
DFN2020-6
KD
AH1803
AH1803 Rev. 1
5 of 7
www.diodes.com
JULY 2007
© Diodes Incorporated
AH1803
MICROPOWER, ULTRA-SENSITIVE HALL EFFECT
SWITCH
Package Information (unit: mm)
(1) Package Type: SC59 (commonly known as SOT23 in Asia)
0.35/0.50
2.70/
3.00
TOP VIEW
1.90
2.90/3.10
1.00/
1.30
0.10/0.20
0.013/0.10
0.95
0.35/0.55
0°/8°
(2) Package Type: DFN2020-6
Marking
0.05 C
0.08 C
(Active area depth)
Seating plane
C
Pin#1 ID
1.95/2.075
1.45/1.65
Sensor location
A
B
0.15 C
2x-
0.65nom.
0.2/0.3
0.05
M C A B
Bottom View
AH1803 Rev. 1
6 of 7
JULY 2007
www.diodes.com
© Diodes Incorporated
AH1803
MICROPOWER, ULTRA-SENSITIVE HALL EFFECT
SWITCH
IMPORTANT NOTICE
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further
notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither
does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will
agreeto hold Diodes Incorporatedand all the companieswhose productsare represented onour website, harmlessagainst all damages.
LIFE SUPPORT
Diodes Incorporated productsare notauthorizedfor use as criticalcomponentsin lifesupportdevices or systems without theexpressed written approval ofthe
President of Diodes Incorporated.
AH1803 Rev. 1
7 of 7
JULY 2007
www.diodes.com
© Diodes Incorporated
相关型号:
AH1804-W-7
Hall Effect Sensor, 1.5mT Min, 6mT Max, 0.20-3.10V, Plastic/epoxy, Rectangular, 3 Pin, Surface Mount, ROHS COMPLIANT, SC-59, 3 PIN
DIODES
AH1807
The AH1807 is a medium sensitivity micropower Omnipolar Hall Effect switch IC designed for battery powered consumer to home appliance and industrial equipment such as smart meter magnetic tamper detect.
DIODES
©2020 ICPDF网 联系我们和版权申明