AH1822-FU4G-7 [DIODES]
MICROPOWER OMNIPOLAR HALL-EFFECT SENSOR; 微功耗全极霍尔效应传感器型号: | AH1822-FU4G-7 |
厂家: | DIODES INCORPORATED |
描述: | MICROPOWER OMNIPOLAR HALL-EFFECT SENSOR |
文件: | 总9页 (文件大小:226K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
AH1822
MICROPOWER OMNIPOLAR HALL-EFFECT SENSOR
SWITCH
General Description
Features
AH1822 is comprised of two Hall effect plates and an open-drain
•
•
Micropower operation
Operation with magnetic field of either north or south
pole (omnipolar)
2.5V to 5.5V battery operation
Chopper stabilized
output driver, mainly designed for battery-operation, hand-held
equipment (such as Cellular and Cordless Phone, PDA). The
total power consumption in normal operation is typically 24μW
with a 3V power source.
•
•
• Superior temperature stability
• Extremely Low Switch-Point Drift
• Insensitive to Physical Stress
Good RF noise immunity
-40°C to 85°C operating temperature
ESD (HBM) > 5KV
Either north or south pole of sufficient strength will turn the output
on. The output will be turned off under no magnetic field. While
the magnetic flux density (B) is larger than operating point (Bop),
the output will be turned on (low), the output is held until B is
lower than release point (Brp), then turned off.
•
•
•
•
DFN2015-6 and DFN3020-6: Available in “Green”
Molding Compound (No Br, Sb)
•
Lead Free Finish/ RoHS Compliant (Note 1)
Applications
•
•
•
Cover switch in clam-shell cellular phones
Cover switch in Notebook PC/PDA
Contact-less switch in consumer products
Ordering Information
AH 1822 - XXX G - 7
Green
Packing
Package
FT4 : DFN2015-6
FU4 : DFN3020-6
G : Green
7 : Tape & Reel
7” Tape and Reel
Packaging
(Note 2)
Package
Device
Code
Quantity
Part Number Suffix
AH1822-FT4G-7
AH1822-FU4G-7
FT4
FU4
DFN2015H4-6
DFN3020H4-6
3000/Tape & Reel
3000/Tape & Reel
-7
-7
Notes:
1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied, see EU Directive 2002/95/EC Annex Notes.
2. Pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at
http://www.diodes.com/datasheets/ap02001.pdf.
AH1822 Rev. 5
1 of 9
FEBRUARY 2009
www.diodes.com
© Diodes Incorporated
AH1822
MICROPOWER OMNIPOLAR HALL-EFFECT SENSOR
SWITCH
Pin Assignments
( Top View )
( Top View )
1
2
3
6
5
4
Vdd
NC
Output
NC
1
2
3
6
5
4
NC
Vdd
NC
Output
GND
GND
GND
GND
DFN2015-6
DFN3020-6
Notes:
3. NC is “No Connection” which is recommended to be tied to ground.
Pin Descriptions
Pin Name
Vdd
P/I/O
P/I
P/I
Description
Power Supply Input
Ground
GND
Output
NC
O
NC
Output Pin
No Connected
Block Diagram
Vdd
Power
switch
Hall Plate
Hall Plate
Latch
Latch
Amp
Output
GND
Logical
Amp
AH1822 Rev. 5
2 of 9
FEBRUARY 2009
www.diodes.com
© Diodes Incorporated
AH1822
MICROPOWER OMNIPOLAR HALL-EFFECT SENSOR
SWITCH
Typical Circuit
2.5~5.5V
RL
C
Output
AH1822
GND
Notes:
4. C is for power stabilization and to strengthen the noise immunity, the recommended capacitance is 10nF~100nF.
RL is the pull-up resistor, the recommended resistance is 10KΩ~100KΩ.
Absolute Maximum Ratings (at TA= 25°C)
Symbol
Characteristics
Values
Unit
Vdd
B
Supply voltage
Magnetic flux density
7
V
Unlimited
TST
PD
TJ
Storage Temperature Range
Package Power Dissipation
Maximum Junction Temperature
-65 to +150
230
°C
mW
°C
150
Recommended Operating Conditions
Symbol
Parameter
Supply Voltage
Operating Temperature Range
Conditions
Rating
Unit
Vdd
TA
Operating
Operating
2.5~5.5
-40 to +85
V
°C
AH1822 Rev. 5
3 of 9
www.diodes.com
FEBRUARY 2009
© Diodes Incorporated
AH1822
MICROPOWER OMNIPOLAR HALL-EFFECT SENSOR
SWITCH
Electrical Characteristics (TA = +25°C, Vdd = 3V; unless otherwise specified)
Symbol
Characteristic
Conditions
Min
Typ.
Max
Unit
Vout
Ioff
Idd(en)
Output On Voltage
Output Leakage Current Vout=5.5V, Output off
Iout=1mA
⎯
⎯
⎯
0.1
<0.1
3
0.3
1
6
V
µA
mA
Chip enable , TA= 25°C , Vdd = 3V
Chip enable , TA= -40~85°C ,
Vdd = 2.5~5.5V
Chip disable , TA= 25°C , Vdd = 3V
Chip disable , TA= -40~85°C ,
Vdd = 2.5~5.5V
Idd(en)
Idd(dis)
Idd(dis)
⎯
⎯
⎯
3
5
5
10
10
18
mA
µA
µA
Supply Current
Average supply current ,
TA= 25°C , Vdd = 3V
Average supply current ,
TA= -40~85°C , Vdd = 2.5~5.5V
For design information only
(Note 5)
Idd(avg)
⎯
⎯
8
8
16
28
µA
µA
Idd(avg)
FC
Tawake Awake Time
Tperiod Period
Chopping Frequency
⎯
⎯
⎯
⎯
300
75
75
⎯
150
150
⎯
KHz
µs
ms
%
(Note 5)
D.C.
Duty Cycle
0.1
Notes:
5. When power is initially on, the operating Vdd (2.5V to 5.5V) must be applied to be guaranteed for the output sampling. The output state is valid
after the second operating phase (typical 150ms).
Tperiod
Tawake
Idd(en)
Sample and output
latched
Idd (dis)
0
AH1822 Rev. 5
4 of 9
FEBRUARY 2009
www.diodes.com
© Diodes Incorporated
AH1822
MICROPOWER OMNIPOLAR HALL-EFFECT SENSOR
SWITCH
Magnetic Characteristics (TA=25°C, Vdd=3V, Note 6, 7)
(1mT=10 Gauss)
Symbol
Characteristic
Min
Typ.
Max
Unit
Bops(south pole to brand side)
Bopn(north pole to brand side)
Brps(south pole to brand side)
Brpn(north pole to brand side)
-
-55
10
-
28
-28
20
55
-
-
Operate Point
Gauss
Release Point
Hysteresis
-20
-10
Bhy( Bopx − Brpx )
5
8
-
Notes:
6. Typical data is at Ta = 25°C, Vdd = 3V, and for design information only.
7. Operating point and release point will vary with supply voltage and operating temperature.
Output
Output
( off-state )
( off-state )
Bhy
Vcc
Vcc
Turn off
Turn off
Bhy
Turn on
Turn on
( on-state )
Bopn
( on-state )
Bops
Vsat
Vsat
Brpn
0
0
Brps
( Magnetic flux density B )
( Magnetic flux density B )
Performance Characteristics
25
50
60
70
80
85
90
100
110
120
130
140
150
TA (°C)
230
184
166
147
129
120
110
92
74
55
37
18
0
PD (mW)
P D (m W )
Power D issipation C urve
300
200
100
0
85
0
25
50
75
100
125
150
。
TA ( C )
AH1822 Rev. 5
5 of 9
FEBRUARY 2009
www.diodes.com
© Diodes Incorporated
AH1822
MICROPOWER OMNIPOLAR HALL-EFFECT SENSOR
SWITCH
Marking Information
(1) DFN2015-6
( Top View )
Pin 1 indicator
XX : Identification Code
Y : Year : 0~9
X X
YWX
W : Week : A~Z : 1~26 week;
a~z : 27~52 week; z represents
52 and 53 week
X : A~Z : Green
Part Number
Package
Identification Code
K7
AH1822
DFN2015-6
(2) DFN3020-6
( Top View )
Pin 1 indicator
XX : Identification Code
Y : Year : 0~9
W : Week : A~Z : 1~26 week;
X X
YWX
a~z : 27~52 week; z represents
52 and 53 week
X : A~Z : Green
Part Number
Package
Identification Code
AH1822
DFN3020-6
K8
AH1822 Rev. 5
6 of 9
FEBRUARY 2009
www.diodes.com
© Diodes Incorporated
AH1822
MICROPOWER OMNIPOLAR HALL-EFFECT SENSOR
SWITCH
Package Information (All Dimensions in mm)
(1) Package type: DFN2015-6
1.45/1.575
B
A
2x-
aaa B
(Pin #1)
(Pin #1)
ccc
C
C
6x-
Seating Plane
0.08
4x-0.50
4x-0.50
C
(Pin #1)
1.0/1.2
0.20/0.30
bbb
C
A B
6x-0..30
Land Pattern Recommendation
Bottom View
(Unit:mm)
(2) Package type: DFN3020-6
1.95/2.075
B
A
2X-
aaa
B
(Pin #1)
ccc
0.08
C
C
Seating Plane
6x-
6x-0.30
0.50Typ.
C
(Pin #1 ID)
0.942/1.142
(Pin #1)
4x-0.50
0.20/0.30
A B
bbb
C
Bottom View
Land Pattern Recommendation
(Unit: mm)
AH1822 Rev. 5
7 of 9
FEBRUARY 2009
www.diodes.com
© Diodes Incorporated
AH1822
MICROPOWER OMNIPOLAR HALL-EFFECT SENSOR
SWITCH
Taping Orientation
(1) DFN2015-6
(2) DFN3020-6
Notes:
8. The taping orientation of the other package type can be found on our website at http://www.diodes.com/datasheets/ap02007.pdf.
AH1822 Rev. 5
8 of 9
FEBRUARY 2009
www.diodes.com
© Diodes Incorporated
AH1822
MICROPOWER OMNIPOLAR HALL-EFFECT SENSOR
SWITCH
IMPORTANT NOTICE
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further
notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither
does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will
agreeto hold Diodes Incorporatedand all the companieswhose products are represented onour website, harmlessagainst all damages.
LIFE SUPPORT
Diodes Incorporated productsare not authorizedfor use as criticalcomponents in lifesupport devices or systemswithout theexpressed written approval of the
President of DiodesIncorporated.
AH1822 Rev. 5
9 of 9
FEBRUARY 2009
www.diodes.com
© Diodes Incorporated
相关型号:
AH183-PL-A
Hall Effect Sensor, 1mT Min, 6mT Max, 0.30V, Rectangular, Through Hole Mount, ROHS COMPLIANT, SIP-3
DIODES
AH183-PL-B
Hall Effect Sensor, 1mT Min, 6mT Max, 0.30V, Rectangular, Through Hole Mount, ROHS COMPLIANT, SIP-3
DIODES
©2020 ICPDF网 联系我们和版权申明