AH1902_16 [DIODES]
HIGH SENSITIVITY MICROPOWER OMNIPLOAR HALL-EFFECT SWITCH;型号: | AH1902_16 |
厂家: | DIODES INCORPORATED |
描述: | HIGH SENSITIVITY MICROPOWER OMNIPLOAR HALL-EFFECT SWITCH |
文件: | 总11页 (文件大小:563K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
AH1902
HIGH SENSITIVITY MICROPOWER
OMNIPLOAR HALL-EFFECT SWITCH
Description
Pin Assignments
The AH1902 is a high-sensitivity micropower Omnipolar Hall effect
switch IC with internal pull up and pull down capability. Designed for
portable and battery powered consumer equipment such as cellular
phones and portable PCs to office equipment, home appliances and
industrial applications, the average supply current is only 4.3μA at
1.8V. To support potable equipment the AH1902 can operate over the
supply range of 1.6V to 3.6V and uses a hibernating clocking system
to minimize the power consumption. To minimize PCB space, the
AH1902 is available in small low profile X1-DFN1216-4,
X2-DFN2015-6 and SOT553 packages.
( Top View )
( Top View )
VDD
NC
1
2
3
6
5
4
OUTPUT
NC
1
2
4
3
VDD
NC
OUTPUT
GND
GND
NC
X2-DFN2015-6
X1-DFN1216-4
( Top View )
1
5
4
NC
GND
NC
OUTPUT
2
3
The output is activated with either a north or south pole of sufficient
magnetic field strength. When the magnetic flux density (B)
perpendicular to the package is larger than operate point (Bop), the
output will be turned on (pulled low) and held until B is lower than
release point (Brp).
VDD
SOT553
Applications
Features
Open and Close Detect for Flip/Slide Cellular Phones
Omnipolar Operation (North or South Pole)
Supply Voltage of 1.6V to 3.6V
High Sensitivity
Smart Cover or Dock Detect for Cellular Phones and Tablet PCs
Cover or Display Switch in Portable PCs (eg: Ultrabook)
Digital Still, Video Cameras and Handheld Gaming Consoles
Door, Lids and Tray Position Switches
Micropower Operation
Chopper Stabilized Design Provides:
Level, Proximity and Position Switches
-
-
-
Superior Temperature Stability
Minimal Switch Point Drift
Contact-Less Switches in Home Appliances and Industrial
Applications
Enhanced Immunity to Physical Stress
No External Pull-up Resistors Required
Good RF Noise Immunity
-40°C to +85°C Operating Temperature
High ESD capability of 8kV (Human Body Model)
Small Low Profile X1-DFN1216-4, X2-DFN2015-6 and SOT553
Packages
Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
Notes:
1. EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. All applicable RoHS exemptions applied.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"
and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
Typical Applications Circuit
1.6V to 3.6V
VDD
OUTPUT
AH1902
CIN
GND
Note:
4. CIN is for power stabilization and to strengthen the noise immunity, the recommended capacitance is 100nF typical and should be placed as close to
the supply pin as possible.
1 of 11
www.diodes.com
April 2016
© Diodes Incorporated
AH1902
Document number: DS36533 Rev. 4 - 2
AH1902
Pin Descriptions
Package: X1-DFN1216-4
Pin Number
Pin Name
Function
1
2
3
4
OUTPUT
GND
NC
Output Pin
Ground Pin
No Connection (Note 5)
Power Supply Input
VDD
The center exposed pad – No connection internally.
The exposed pad can be left open (unconnected to ) on the PCB layout.
Pad
Pad
Package: X2-DFN2015-6
Pin Number
Pin Name
Function
1
2
3
4
5
6
OUTPUT
NC
Output Pin
No Connection (Note 5)
No Connection (Note 5)
Ground Pin
NC
GND
NC
No Connection (Note 5)
Power Supply Input
VDD
The center exposed pad – No connection internally.
The exposed pad can be left open (unconnected to) on the PCB layout.
Pad
Pad
Package: SOT553
Pin Number
Pin Name
NC
Function
No Connection (Note 5)
Ground Pin
1
2
3
4
5
GND
NC
No Connection (Note 5)
Power Supply Input
VDD
OUTPUT
Output Pin
Note:
5. NC is “No Connection” pin and is not connected internally. This pin can be left open or tied to ground.
Functional Block Diagram
VDD
Sleep/Awake Logic
and Power Switch
Hall
Plate
Latch
and
Output
Driver
Controller
Amp
OUTPUT
GND
2 of 11
www.diodes.com
April 2016
© Diodes Incorporated
AH1902
Document number: DS36533 Rev. 4 - 2
AH1902
Absolute Maximum Ratings (Note 6) (@TA = +25°C, unless otherwise specified.)
Symbol
VDD
Parameter
Rating
Unit
V
Supply Voltage (Note 7)
Reverse Supply Voltage
Output Current (source and sink)
Magnetic Flux Density
6
-0.3
3
V
VDD_REV
IOUTPUT
B
mA
Unlimited
X1-DFN1216-4 and X2-DFN2015-6
SOT553
230
230
mW
mW
°C
Package Power Dissipation
PD
Ts
TJ
Storage Temperature Range
-65 to +150
+150
Maximum Junction Temperature
°C
ESD HBM
Human Body Model (HMB) ESD capability
8
kV
Notes:
6. Stresses greater than the 'Absolute Maximum Ratings' specified above may cause permanent damage to the device. These are stress ratings only;
functional operation of the device at these or any other conditions exceeding those indicated in this specification is not implied. Device reliability may be
affected by exposure to absolute maximum rating conditions for extended periods of time.
7. The absolute maximum VDD of 6V is a transient stress rating and is not meant as a functional operating condition. It is not recommended to
operate the device at the absolute maximum rated conditions for any period of time.
Recommended Operating Conditions (@TA = +25°C, unless otherwise specified.)
Symbol
VDD
Parameter
Supply Voltage
Operating Temperature Range
Conditions
Rating
Unit
V
Operating
Operating
1.6V to 3.6V
-40 to +85
TA
C
Electrical Characteristics (@TA = +25°C, VDD = 1.8V, unless otherwise specified.)
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
VOL
Output Low Voltage (on)
IOUT = 1mA
IOUT = -1mA
—
0.1
0.2
V
VOH
Ioff
Output High Voltage (off)
Output Leakage Current
VDD-0.2
VDD-0.1
—
V
—
< 0.1
1
µA
VOUT = 3.6V, Output off
During ‘awake’ period,
TA = +25°C, VDD = 3V
During ‘sleep’ period,
TA = +25°C, VDD = 3V
—
—
2.1
2.5
—
—
mA
µA
IDD(awake)
IDD(sleep)
Supply Current
—
—
—
—
—
4.3
7.2
50
8
µA
µA
µs
ms
%
TA = +25°C, VDD = 1.8V
Average Supply Current
IDD(avg)
13
TA = +25°C, VDD = 3.6V
Tawake
Tperiod
D.C.
Awake Time
Period
(Note 8)
(Note 8)
—
100
100
—
50
Duty Cycle
0.1
Note:
8. When power is initially turned on, the operating VDD (1.6V to 3.6V) must be applied to guaranteed the output sampling.
The output state is valid after the second operating cycle (typical 100ms).
Tperiod
Tawake
IDD(awake)
Tsleep
Sample and output
latched
IDD(avg)
IDD(sleep)
0
3 of 11
www.diodes.com
April 2016
© Diodes Incorporated
AH1902
Document number: DS36533 Rev. 4 - 2
AH1902
Magnetic Characteristics (Note 9 &10) (TA = +25°C, VDD = 1.8V, unless otherwise specified)
(1mT=10 Gauss)
Symbol
Characteristics
Test Condition
Min
Typ
Max
Unit
—
23
33
47
Bops (south pole to part marking side)
VDD = 1.6V to 3.6V
TA = -40°C to +85°C
—
21
-47
-48
12
9
33
-33
-33
23
48
-24
-21
35
38
-12
-9
Operation Point
Bopn (north pole to part marking side)
Brps (south pole to part marking side)
VDD = 1.6V to 3.6V
TA = -40°C to +85°C
—
Gauss
VDD = 1.6V to 3.6V
TA = -40°C to +85°C
—
23
Release Point
Hysteresis
-35
-38
—
-23
-23
10
Brpn (north pole to part marking side)
Bhy (|Bopx|-|Brpx|)
VDD = 1.6V to 3.6V
TA = -40°C to +85°C
—
—
Notes:
9. Typical data is at T = +25C, VDD = 1.8V.
A
10. Maximum and minimum parameters values over operating temperature range are not tested in production, they are guaranteed by design,
characterization and process control. The magnetic characteristics may vary with supply voltage, operating temperature and after soldering.
OUTPUT
(off-state)
VDD
(off-state)
VOH
VOH
Turn
off
Turn
on
Bhy
Turn
off
Bhy
Turn
on
(on-state)
VOL
(on-state)
VOL = VSAT
Bops
Brps
Bopn Brpn
0
( Magnetic Flux Density B )
4 of 11
www.diodes.com
April 2016
© Diodes Incorporated
AH1902
Document number: DS36533 Rev. 4 - 2
AH1902
Typical Operating Characteristics
60
50
60
50
VDD = 1.6V
VDD = 1.8V
40
30
20
40
30
20
Bops
Brps
Bops
Brps
10
0
10
0
Bhy
Bhy
-10
-20
-30
-40
-50
-60
-10
-20
-30
-40
-50
-60
Brpn
Bopn
Brpn
Bopn
-50
-25
0
25
50
75
100
-50
-25
0
25
50
75
100
Temperature (°C)
Switch Points vs Temperature
Temperature (°C)
Switch Points vs Temperature
60
50
60
50
TA = +25 ꢀC
VDD = 3.6V
40
30
20
40
30
20
Bops
Brps
Bops
Brps
10
0
10
0
Bhy
Bhy
-10
-20
-30
-40
-50
-60
-10
-20
-30
-40
-50
-60
Brpn
Bopn
Brpn
Bopn
-50
-25
0
25
50
75
100
1.5
1.8
2.1
2.4
2.7
3
3.3
3.6
3.9
Temperature (°C)
Switch Points vs Temperature
Temperature (°C)
Switch Points vs Temperature
10
9
8
7
6
5
4
3
2
1
0
10
9
8
7
6
5
4
3
2
1
0
TA = +25 ꢀC
3.6V
1.8V
1.6V
-50
-25
0
25
50
75
100
1.5
1.8
2.1
2.4
2.7
3
3.3
3.6
3.9
Supply Voltage (V)
Average Supply Current vs. Supply Voltage
Temperature (ꢀC)
Average Supply Current vs. Temperature
5 of 11
www.diodes.com
April 2016
© Diodes Incorporated
AH1902
Document number: DS36533 Rev. 4 - 2
AH1902
Ordering Information
AH1902 - XXX - X
Package
Packing
7 : Tape & Reel
FA : X1-DFN1216-4
FT4 : X2-DFN2015-6
Z : SOT553
7” Tape and Reel
Part Number Suffix
Package
Code
Part Number
Packaging
Quantity
AH1902-FA-7
AH1902-FT4-7
AH1902-Z-7
FA
X1-DFN1216-4
X2-DFN2015-6
SOT553
3,000/Tape & Reel
3,000/Tape & Reel
3,000/Tape & Reel
-7
-7
-7
FT4
Z
Marking Information
(1) Package Type: X1-DFN1216-4 and X2-DFN2015-6
( Top View )
Pin 1 indicator
XX : Identification Code
Y : Year : 0~9
X X
W : Week : A~Z : 1~26 week;
a~z : 27~52 week; z represents
52 and 53 week
Y W X
X : Internal code
Part Number
AH1902-FA-7
AH1902-FT4-7
Package
X1-DFN1216-4
X2-DFN2015-6
Identification Code
F2
D2
(2) Package Type: SOT553
( Top View )
XX : Identification Code
Y : Year : 0 to 9
W : Week : A to Z : 1~26 week;
a to z : 27~52 week; z represents
52 and 53 week
XX Y W X
X : Internal code
Part Number
AH1902-Z-7
Package
Identification Code
SOT553
D2
6 of 11
www.diodes.com
April 2016
© Diodes Incorporated
AH1902
Document number: DS36533 Rev. 4 - 2
AH1902
Package Outline Dimensions (All dimensions in mm.)
Please see http://www.diodes.com/package-outlines.html for the latest version.
(1) Package Type: X1-DFN1216-4
A
A3
A1
Seating Plane
X1-DFN1216-4
Dim Min Max Typ
A
A1
A3
b
D
D2
E
E2
e
L
0.47 0.53 0.50
0.00 0.05 0.02
D
--
--
0.13
e
0.15 0.25 0.20
1.15 1.25 1.20
0.75 0.95 0.85
1.55 1.65 1.60
0.55 0.75 0.65
(
Pin #1 ID)
C'0.2x45°
-
-
0.65
0.20 0.30 0.25
0.175
E
E2
L
Z
-
-
All Dimensions in mm
D2
b
Z
Bottom View
Min/Max
Top View
PART
MARKING
SURFACE
Pin# 1
Die
Hall Sensor
0.77/0.83
Sensor Location
7 of 11
www.diodes.com
April 2016
© Diodes Incorporated
AH1902
Document number: DS36533 Rev. 4 - 2
AH1902
Package Outline Dimensions (continued) (All dimensions in mm.)
Please see http://www.diodes.com/package-outlines.html for the latest version.
(2) Package Type: X2-DFN2015-6
A1
A3
A
X2-DFN2015-6
Dim Min Max Typ
Seating Plane
A
A1
A3
b
0.375 0.40 0.390
D
0
0.05 0.02
L
z
-
-
0.13
0.20 0.30 0.25
1.45 1.575 1.50
D
D2 1.00 1.20 1.10
( Pin #1 ID)
e
-
-
0.50
E
1.95 2.075 2.00
E
E2
E2 0.70 0.90 0.80
L
Z
D2
0.25 0.35 0.30
-
-
-
-
0.125
0.075
z1
Z1
All Dimensions in mm
e
b
Bottom View
Min/Max
Top View
PART
MARKING
SURFACE
Pin# 1
Die
Hall Sensor
0.97/1.04
Sensor Location
8 of 11
www.diodes.com
April 2016
© Diodes Incorporated
AH1902
Document number: DS36533 Rev. 4 - 2
AH1902
Package Outline Dimensions (cont.) (All dimensions in mm.)
Please see http://www.diodes.com/package-outlines.html for the latest version.
(3) Package Type: SOT553
D
e1
SOT553
Dim
A
b
c
D
E
E1
e
e1
F
L
Min
Max
0.62
0.30
0.18
1.70
1.70
1.25
0.50 BSC
1.00 BSC
0.10
Typ
0.60
0.20
0.15
1.60
1.60
1.20
0.55
0.15
0.10
1.50
1.55
1.10
e
E/2
E1/2
E1
E
L (5x)
c
b (5x)
F
0.00
0.10
6°
––
0.20
7°
0.30
8°
R0.1 MAX.
TYP.
a
All Dimensions in mm
A
TYP.
Min/Max
Pin# 1
PART
MARKING
SURFACE
Die
Hall Sensor
0.75/0.85
Sensor Location
9 of 11
www.diodes.com
April 2016
© Diodes Incorporated
AH1902
Document number: DS36533 Rev. 4 - 2
AH1902
Suggested Pad Layout
Please see http://www.diodes.com/package-outlines.html for the latest version.
(1) Package Type: X1-DFN1216-4
X1
C
X1-DFN1216-4
Dimensions Value
C
X
X1
Y
Y1
Y2
0.65
0.25
0.90
0.50
0.70
2.00
Y2
Y1
Y
All Dimensions in mm
X
(2) Package Type: X2-DFN2015-6
X2
C
X
X2-DFN2015-6
Dimensions
Value
0.500
0.350
1.150
1.350
0.500
0.850
2.150
Y
C
X
X1
X2
Y
Y1
Y2
Y1
Y2
All Dimensions in mm
X1
(3) Package Type: SOT553
C2
C2
SOT553
Dimensions
Value
Z
G
X
2.2
1.2
0.375
0.5
C1
G
Z
Y
C1
C2
1.7
0.5
Y
All Dimensions in mm
X
10 of 11
www.diodes.com
April 2016
© Diodes Incorporated
AH1902
Document number: DS36533 Rev. 4 - 2
AH1902
IMPORTANT NOTICE
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
(AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes
without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the
application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or
trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume
all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated
website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel.
Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and
hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or
indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings
noted herein may also be covered by one or more United States, international or foreign trademarks.
This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the
final and determinative format released by Diodes Incorporated.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express
written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the
labeling can be reasonably expected to result in significant injury to the user.
B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the
failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any
use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related
information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its
representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems.
Copyright © 2016, Diodes Incorporated
www.diodes.com
11 of 11
www.diodes.com
April 2016
© Diodes Incorporated
AH1902
Document number: DS36533 Rev. 4 - 2
相关型号:
AH1903-FA-7
Hall Effect Sensor, 0.9mT Min, 4.8mT Max, 0.2-1.6V, Rectangular, Surface Mount, 1.20 X 1.60 MM, GREEN, DFN-4
DIODES
©2020 ICPDF网 联系我们和版权申明