AH286-WL-7 [DIODES]

Brushless DC Motor Controller, 0.7A, PDSO5, LEAD FREE, SOT-25, 5 PIN;
AH286-WL-7
型号: AH286-WL-7
厂家: DIODES INCORPORATED    DIODES INCORPORATED
描述:

Brushless DC Motor Controller, 0.7A, PDSO5, LEAD FREE, SOT-25, 5 PIN

电动机控制 输入元件 光电二极管
文件: 总10页 (文件大小:294K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
PART OBSOLETE NO ALTERNATE PART  
AH286  
HALL-EFFECT SMART FAN MOTOR CONTROLLER  
Description  
Pin Assignments  
The AH286 is a single-chip solution for driving two-coil brushless  
direct current (BLDC) fans and motors. The device includes a Hall-  
effect sensor, dynamic offset correction and two complementary  
open-drain output drivers with internal Zener diode protection.  
(Top View)  
Vdd  
1
2
RD  
5
286  
GND  
To help protect the motor coils, the AH286 provides Rotor Lock  
Protection which shuts down output drives if rotor lock is detected.  
The device automatically re-starts when the rotor lock is removed. A  
Rotor-lock Detect (RD) output flag allows external monitoring of any  
motor locks.  
DO 3  
4 DOB  
SO9-5  
The AH286 is available in SOT89-5 package.  
Application
Features  
Two-l BLDC Cooling Fans  
Loo Medium Voltage, Low PoweBLDC Motors  
Single-chip Solution  
Operating Voltage: 3.8V to 20V  
Built-in Hall Sensor and Input Amplifier  
Rotor-lock Detect (RD) Flag  
Rotor Lock Protection (Lock detection, output shutdown and  
automatic re-start)  
Built-in Zener Protection For Output Driver  
Average output current up to 500mA  
Packaged in SOT89-5  
Green Molding Compound  
Totally Lead-Free & Fully RoHS Compliant (Not
Halogen and Antimony Free. “Green” Device (
Notes:  
1. No purposely added lead. Fully EDirectie 2002/9565/EU (RoHS 2) compliant.  
2. See http://www.diodes.com/quy/lead_free.html for moabout Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"  
and Lead-free.  
3. Halogen- and Antimony-free "een” produe ned as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and  
<1000ppm antimony compound
1 of 10  
www.diodes.com  
June 2017  
© Diodes Incorporated  
AH286  
Document number: DS31030 Rev. 13 - 4  
PART OBSOLETE NO ALTERNATE PART  
AH286  
Typical Application Circuit (Note 4)  
D2  
Vdd  
(12V)  
Rpu  
D1  
5
1
4
3
Coil2  
RD  
286  
Coil1  
2
D3  
C3  
R1  
C1  
R2  
C2  
GND  
12V DC Brush-Less Fan with RD Output Function  
Notes: 4. Typically it is recommended to us a 56 Ohm resistor for R1 and R2 and a 2.2μF E-Cap capacitor for C1, C2 and C3. These values may need to be  
optimized depending on the coils used.  
To help with IC protection it’s advised to add a Zener diode between Vdd and ground. The Zener diode should be chosen to help prevent the supply voltage  
exceeding the maximum rating of the device.  
Pin Descriptions  
Pin Name  
Description  
RD  
Vdd  
DO  
Rotor-state detection  
Input power  
Output pin  
DOB  
GND  
Output pin  
Ground  
2 of 10  
www.diodes.com  
June 2017  
© Diodes Incorporated  
AH286  
Document number: DS31030 Rev. 13 - 4  
PART OBSOLETE NO ALTERNATE PART  
AH286  
Functional Block Diagram  
Vdd  
Lock detect,  
shutdown and  
automatic re-start  
Regulator  
DO  
Hall  
Plate  
Control Logic  
Amp.  
DOB  
GND  
RD  
3 of 10  
www.diodes.com  
June 2017  
© Diodes Incorporated  
AH286  
Document number: DS31030 Rev. 13 - 4  
PART OBSOLETE NO ALTERNATE PART  
AH286  
Absolute Maximum Ratings (T = +25°C )  
A
Symbol  
Characteristics  
Rating  
Unit  
Vdd  
Supply Voltage  
Output Current  
24  
500  
V
mA  
mA  
mW  
C  
IO (AVE)  
IO  
IO (PEAK)  
700  
Power Dissipation  
800  
PD  
Storage Temperature  
-55 to +150  
+150  
TST  
Maximum Junction Temperature  
Thermal Resistance Junction to Case (Note 5)  
C  
TJ  
156  
C/W  
θJA  
TA  
TJ  
Tc  
JA  
JC  
Note: 5. θJA should be confirmed with heat sink thermal resistance. If there is no heat sink contact, θJA will almost be the same as θJC  
.
Recommended Operating Conditions  
Symbol  
Characteristic  
Conditions  
Min  
Max  
Unit  
Vdd  
TA  
Supply Voltage  
Operating Ambient Temperature  
Operating  
Operating  
3.8  
-40  
20  
V
+100  
C  
4 of 10  
www.diodes.com  
June 2017  
© Diodes Incorporated  
AH286  
Document number: DS31030 Rev. 13 - 4  
PART OBSOLETE NO ALTERNATE PART  
AH286  
Electrical Characteristics (TA = +25°C, VDD = 12V, unless otherwise specified.)  
Symbol  
Characteristics  
Supply Current  
Conditions  
Min  
Typ.  
Max  
Unit  
Idd  
IOFF  
Operating  
VOUT = 24V  
-
-
-
2.0  
< 0.1  
0.5  
4.0  
10  
mA  
μA  
Output Leakage Current  
Rotor Lock Protection On Time  
0.4  
0.6  
Sec  
tRLP-ON  
Rotor Lock Protection Off Time  
-
2.4  
3
3.6  
500  
900  
1.67  
-
Sec  
tRLP-OFF  
-
-
375  
625  
1.25  
0.5  
42  
IO = 300mA  
IO = 500mA  
IO = 300mA  
IO = 10mA  
-
Output Saturation Voltage  
mV  
VOUT(SAT)  
Output On Resistance  
RD Output Vds  
-
  
V
RDS(ON)  
VOL  
-
Vz  
Output Zener-Breakdown Voltage  
35  
60  
V
Truth Table (Note 6)  
IN-  
IN+  
CT  
OUT1  
OUT2  
RD  
Mode  
H
L
-
L
H
-
L
L
H
H
L
Off  
L
H
Off  
L
L
H
Rotating  
Rotating  
Lockup protection activated  
Note: 6. Latch-type RD output is low during rotor rotation and high when the rotor is locked (not rotating).  
Magnetic Characteristics (TA = +25°C, VDD = 12V, unless otherwise specified, Note 7)  
(1mT = 10 Gauss)  
Symbol  
Characteristics  
Min  
Typ.  
Max  
Unit  
Bop  
Brp  
Bhy  
Operate Point  
Release Point  
Hysteresis  
10  
-60  
-
30  
-30  
60  
60  
-10  
-
Gauss  
Gauss  
Gauss  
Note: 7. The magnetic characteristics may vary with supply voltage, operating temperature and after soldering.  
5 of 10  
www.diodes.com  
June 2017  
© Diodes Incorporated  
AH286  
Document number: DS31030 Rev. 13 - 4  
PART OBSOLETE NO ALTERNATE PART  
AH286  
Operating Characteristics  
DOB  
DO  
12  
10  
8
12  
10  
8
RP  
ON  
OFF  
OP  
OFF  
OP  
ON  
6
6
4
4
2
2
RP  
Vsat  
Vsat  
Brp  
0
Bop  
Brp  
0
Bop  
Magnetic Flux Density in Gauss  
Magnetic Flux Density in Gauss  
S
N
Marking  
side  
( SOT89-5 )  
6 of 10  
www.diodes.com  
June 2017  
© Diodes Incorporated  
AH286  
Document number: DS31030 Rev. 13 - 4  
PART OBSOLETE NO ALTERNATE PART  
AH286  
Performance Characteristics  
25  
50  
60  
70  
75  
80  
85  
416  
135  
96  
90  
384  
140  
64  
95  
352  
145  
32  
100  
320  
150  
0
TA (C)  
PD (mW)  
TA (C)  
800  
105  
288  
640  
110  
256  
576  
115  
224  
512  
120  
192  
480  
125  
160  
448  
130  
128  
PD (mW)  
7 of 10  
www.diodes.com  
June 2017  
© Diodes Incorporated  
AH286  
Document number: DS31030 Rev. 13 - 4  
PART OBSOLETE NO ALTERNATE PART  
AH286  
Ordering Information  
AH 286 - Y G - 13  
Package  
Green  
Packing  
Y : SOT89-5  
G : Green  
13 : Tape & Reel  
Bulk  
13ape and Reel  
Package  
Packaging  
(Note 8, 9)  
Device  
Code  
Part Number  
Quantity  
Quantity  
Pt Number Suffix  
Suffix  
AH286-YG-13  
Y
SOT89-5  
NA  
NA  
2500/Te & Reel  
-13  
Notes: 8. Pad layout as shown on Diodes Incorporateds suggested pad layout document, which can be founour website at  
http://www.diodes.com/package-outlines.html.  
9. Reverse taping as shown on Diodes Incorporateds Surface Mount (SMD) Packaging documenP02007, ich can be found o
website http://www.diodes.com/datasheets/ap02007.pdf.  
Marking Information  
(Top View)  
5
1
4
Y : Year : 0~9  
W Week : A~: 1~26 week;  
~z : 272 week;  
286
z eprents 52 and 53 week  
X : Inteal code  
A~Z : Green  
SOT89-5  
8 of 10  
www.diodes.com  
June 2017  
© Diodes Incorporated  
AH286  
Document number: DS31030 Rev. 13 - 4  
PART OBSOLETE NO ALTERNATE PART  
AH286  
Package Outline Dimensions (All Dimensions in mm)  
r Location  
9 of 10  
www.diodes.com  
June 2017  
© Diodes Incorporated  
AH286  
Document number: DS31030 Rev. 13 - 4  
PART OBSOLETE NO ALTERNATE PART  
AH286  
IMPORTANT NOTICE  
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT,  
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE  
(AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).  
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes  
without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the  
application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or  
trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume  
all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represeted on Diodes Incorporated  
website, harmless against all damages.  
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased ough unauthorized sales channel.  
Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized applion, Customs shall indemnify and  
hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attoey feerising out of, directly or  
indirectly, any claim of personal injury or death associated with such unintended or unauthorized appliion.  
Products described herein may be covered by one or more United States, international or foreigents pending. Puct nas and markings  
noted herein may also be covered by one or more United States, international or foreign traderks.  
This document is written in English but may be translated into multiple languages for refence. Only the glish version of this document is the  
final and determinative format released by Diodes Incorporated.  
LIFE SUPPORT  
Diodes Incorporated products are specifically not authorized for use as critical comnents life support devices or systems without the express  
written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:  
A. Life support devices or systems are devices or systems which:  
1. are intended to implant into the body, or  
2. support or sustain life and whose failure ten prorly used accordance with instructions for use provided in the  
labeling can be reasonably expected to rejury to e us
B. A critical component is any component in a life supwhose failure to perform can be reasonably expected to cause the  
failure of the life support device or to affect its safet
Customers represent that they have all nssarexpertisd regulatory ramifications of their life support devices or systems, and  
acknowledge and agree that they are sly responsible for all tory and safety-related requirements concerning their products and any  
use of Diodes Incorporated products such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related  
information or support that may be pvided by odes corporated. Further, Customers must fully indemnify Diodes Incorporated and its  
representatives against any damages arisof the use Diodes Incorporated products in such safety-critical, life support devices or systems.  
Copyright © 2017, Diodes d  
www.diodes.com  
10 of 10  
www.diodes.com  
June 2017  
© Diodes Incorporated  
AH286  
Document number: DS31030 Rev. 13 - 4  

相关型号:

AH286-WLA

Hall-Effect Smart Fan Motor Controller
ANACHIP

AH286-Y

HALL-EFFECT SMART FAN MOTOR CONTROLLER
DIODES

AH286-Y

Sensor/Transducer, Open-drain, 5 Pin, Plastic/epoxy,
ANACHIP

AH286-YA

Sensor/Transducer, Open-drain, 5 Pin, Plastic/epoxy,
DIODES

AH286-YA

Sensor/Transducer, Open-drain, 5 Pin, Plastic/epoxy,
ANACHIP

AH286-YG-13

HALL-EFFECT SMART FAN MOTOR CONTROLLER
DIODES

AH286-YL

Hall-Effect Smart Fan Motor Controller
ANACHIP

AH286-YL-13

HALL-EFFECT SMART FAN MOTOR CONTROLLER
DIODES

AH286-YL-7

HALL-EFFECT SMART FAN MOTOR CONTROLLER
DIODES

AH286-YL-B

HALL-EFFECT SMART FAN MOTOR CONTROLLER
DIODES

AH286-YLA

Hall-Effect Smart Fan Motor Controller
ANACHIP

AH286A-PL

Hall-Effect Smart Fan Motor Controller
ANACHIP