AP431YG-13 [DIODES]
Three Terminal Voltage Reference, 1 Output, 2.495V, Trim/Adjustable, BIPolar, PSSO3, GREEN, SOT-89, 3 PIN;型号: | AP431YG-13 |
厂家: | DIODES INCORPORATED |
描述: | Three Terminal Voltage Reference, 1 Output, 2.495V, Trim/Adjustable, BIPolar, PSSO3, GREEN, SOT-89, 3 PIN |
文件: | 总17页 (文件大小:628K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
NOT RECOMMENDED FOR NEW DESIGN
USE AS431
AP431/AP431A
ADJUSTABLE PRECISION SHUNT REGULATOR
Description
Pin Assignments
(1) SOT25
(Top View)
(2) SO-8
(Top View)
The AP431 and AP431A are 3-terminal adjustable precision shunt
regulators with guaranteed temperature stability over the applicable
extended commercial temperature range. The output voltage may be
set at any level greater than 2.495V (VREF) up to 36V merely by
selecting two external resistors that act as a voltage divider network.
These devices have a typical output impedance of 0.2Ω. Active output
circuitry provides very sharp turn-on characteristics, making these
devices excellent improved replacements for Zener diodes in many
applications.
1
2
3
4
8
7
REF
CATHODE
ANODE
5
4
ANODE
REF
NC
NC
1
2
3
ANODE
ANODE
6
5
ANODE
C
NC
CATHODE
(3) SC59
(4) SC59R
(Top View)
(Top View)
The precise (+/-) 1% reference voltage tolerance of the
AP431/AP431A make it possible in many applications to avoid the
use of a variable resistor, consequently saving cost and eliminating
drift and reliability problems associated with it.
1
2
REF
CATHODE
REF
1
ANODE
3
CATHODE
2
(5) SOT23
(6) SOT23R
(Top View)
Features
(Top View)
•
•
•
•
•
•
•
•
•
•
•
Precision Reference Voltage
REF
1
1
3
2
CATHODE
REF
AP431: 2.495V ± 1%
AP431A: 2.495V ± 0.5%
ANODE
3
ANODE
Sink Current Capability: 200mA
Minimum Cathode Current for Regulation: 300μA
Equivalent Full-Range Temp Coefficient: 30ppm/°C
Fast Turn-On Response
CATHODE 2
Low Dynamic Output Impedance: 0.2Ω
Programmable Output Voltage to 36V
Low Output Noise
(OT89
(Top View)
Lead Free Packages: SOT25, SC59, SC59R, SOT89 and SO-8
.
Totally Lead-Free; RoHS Compliant (Notes 1 & 2)
•
SOT23, SOT23R, SOT25, SCC59R, SO-8, SOT89:
Available in “Green” Moldinound (No Br, Sb). See
“Ordering Information”
3
2
1
Anode Cathode
REF
.
Halogen and Antimony Free. “Green” Device (Note 3)
Notes:
1. No purposely added lead. rective 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. Sehttp://www.diodes.com information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free.
3. Halogen- and Atimonyfree "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl)
and <1000ppm animny compounds.
1 of 17
www.diodes.com
September 2014
© Diodes Incorporated
AP431/AP431A
Document number: DS31002 Rev. 21 - 2
NOT RECOMMENDED FOR NEW DESIGN
USE AS431
AP431/AP431A
Typical Applications Circuit
VIN
VOUT
+
+
R1
R2
CIN
COUT
AP431
VOUT = (1 + R1/ R2) VREF
Precision Regulator
Symbol
Cathode (C)
)
Anode (A)
Functional Block Diagram
REF (R
+
-
VREF
Anode (A)
2 of 17
www.diodes.com
September 2014
© Diodes Incorporated
AP431/AP431A
Document number: DS31002 Rev. 21 - 2
NOT RECOMMENDED FOR NEW DESIGN
USE AS431
AP431/AP431A
Absolute Maximum Ratings (@TA = +25°C, unless otherwise specified.)
Parameter
Rating
Unit
V
Cathode Voltage
+36
-10 to +250
10
Continuous Cathode Current
Reference Input Current
Operating Temperature
Storage Temperature
mA
mA
°C
-20 to +85
-65 to +150
400
°C
SOT23(R)
SOT25
SC59(R)
SO-8
mW
mW
mW
mW
mW
550
Power Dissipation (Notes 4, 5)
400
600
SOT89
800
Notes:
4. T , max = +150°C.
J
5. Ratings apply to ambient temperature at +25°C.
Electrical Characteristics (@TA = +25°C, VDD = 3V; unless otherwse specified.
Symbol
Parameter
Coditions
Min
Typ
Max
Units
V
KA = VREF
,
AP431
P431A
2.470
2.82
2.520
2.507
Reference voltage
2.495
V
VREF
IKA = 10m(Figure 1)
V
KA VREF, IA = 10mA
Deviation of reference input voltage over
temperature (Note 5)
—
8.0
20.0
mV
VDEV
T= Full Range (Figure 1)
—
—
—
-1.4
-1
-2.0
-2
mV/V
mV/V
µA
Vto 10V
ΔVREF
ΔVKA
Ratio of the change in reference voltage t
the change in cathode voltage
mA (Figure 2)
VKA = to 36V
Refernce input current
1.4
3.5
IREF
R1 = 10KΩ, R2 = ∞ KA = 10mA (Figure 2)
R1 = 10KΩ, R2 = ∞ IK= 10mA
Deviation of reference input current over
temperature
—
0.4
1.2
µA
αIREF
TA = Full range (Figure 2)
Minimum cathode current for egulation
Off-state current
—
—
0.19
0.1
0.50
1.0
mA
µA
IKA(MIN)
IKA(OFF)
VK= VREF (Figure 1)
VKA = 36V, VRF = 0V (Figure 3)
V
K= VRVKA = VREF
Dynamic output impedance (Note 7)
—
0.2
0.5
Ω
|ZKA
|
ΔIKA 0.1mA to 15mA
Frequency ≤ 1KHz (Figure 1)
3 of 17
www.diodes.com
September 2014
© Diodes Incorporated
AP431/AP431A
Document number: DS31002 Rev. 21 - 2
NOT RECOMMENDED FOR NEW DESIGN
USE AS431
AP431/AP431A
Electrical Characteristics (cont.) (@TA = +25°C, VDD = 3V; unless otherwise specified.)
VMAX
VDEV = VMAX - VMIN
VMIN
T1
Temperature
Note: 6. Deviation of reference input voltage, VDEV, is defined as the maximum variation of the reference over the fulemperare range.
The average temperature coefficient of the reference input voltage αVREF is defined as:
VDEV
(
)⋅106
VREF(25°C)
T2 − T1
ppm
……………………..………..…………….. (
αVREF
=
)
°C
Where:
T2 – T1 = full temperature change.
αVREF can be positive or negative depending on whether tslope is positive or negatve.
Note: 7. The dynamic output impedance, RZ, is define
∆VKA
∆IKA
ZKA
=
When the device is programmed with two external resistors R1 and R2 see Figure 2.), the dynamic output impedance of the overall
circuit, is defined as:
∆v
∆i
R1
R2
'
ZKA
=
≈ ZKA (1+
)
Test Conditions
IN
IN
ut
IKA
VKA
VKA
VKA
IKA
R1
R2
IREF
IZ(OFF)
VREF
VREF
Note: VKA = VREF (1 + R1/R2) + IREF xR1
Figure. 2 Test Circuit for VKA > VREF
Figure. 1 Test Circuit for VKA = VREF
Figure. 3 Test Circuit for Off-State Current
4 of 17
www.diodes.com
September 2014
© Diodes Incorporated
AP431/AP431A
Document number: DS31002 Rev. 21 - 2
NOT RECOMMENDED FOR NEW DESIGN
USE AS431
AP431/AP431A
Typical Performace Characteristics
100
V
T
= V
REF
= 25°C
KA
V
T
= V
REF
KA
= 25°C
600
400
A
A
I
KA(MIN)
0
200
0
-200
-100
-1
-0.5
0.5
CATHODE VOLTAGE (V)
Cathoe Current (µAvs. Cathde Voltage
1
1.5
2
2.5
-1
-0.5
CATHODE VOLTAGE (V)
Cathode Current vs. Cathode Voltage
0.5
1.5
2.5
250
2
1.8
1.
1.4
R1 = 10k
= 10mA
I
KA
2495
2490
2485
2480
1.2
1
-50
-25
0
25
FREE-AIR TEMPERATURE (V)
Reverence Input Current vs. Free Temperature
50
75
100
125
-40
-20
0
20
40
60
0
FREE-AIR TEMPERATURE (C
Reference Voltage vs. Free-Air Temperature
0
-2
-4
-6
-8
0mA
T
= 25°C
A
-10
-12
0
5
10
CATHODE VOLTAGE (V)
Change in Reference Voltage vs. Cathode Voltage
15
20
25
30
5 of 17
www.diodes.com
September 2014
© Diodes Incorporated
AP431/AP431A
Document number: DS31002 Rev. 21 - 2
NOT RECOMMENDED FOR NEW DESIGN
USE AS431
AP431/AP431A
Typical Performance Characteristics (cont.)
100
V
T
= V
REF
= 25°C
KA
V
T
= V
REF
KA
= 25°C
600
400
A
A
I
KA(MIN)
0
200
0
-200
-100
-1
-0.5
0.5
CATHODE VOLTAGE (V)
Cathoe Current (µAvs. Cathde Voltage
1
1.5
2
2.5
-1
-0.5
CATHODE VOLTAGE (V)
Cathode Current vs. Cathode Voltage
0.5
1.5
2.5
250
2
1.8
1.
1.4
R1 = 10k
= 10mA
I
KA
2495
2490
2485
2480
1.2
1
-50
-25
0
25
FREE-AIR TEMPERATURE (V)
Reverence Input Current vs. Free Temperature
50
75
100
125
-40
-20
0
20
40
60
0
FREE-AIR TEMPERATURE (C
Reference Voltage vs. Free-Air Temperature
0
-2
-4
-6
-8
0mA
T
= 25°C
A
-10
-12
0
5
10
CATHODE VOLTAGE (V)
Change in Reference Voltage vs. Cathode Voltage
15
20
25
30
6 of 17
www.diodes.com
September 2014
© Diodes Incorporated
AP431/AP431A
Document number: DS31002 Rev. 21 - 2
NOT RECOMMENDED FOR NEW DESIGN
USE AS431
AP431/AP431A
Typical Performance Characteristics (cont.)
60
50
40
30
20
I
= 10mA
KA
Output
T
= 25°C
A
IKA
15KΩ
232Ω
9µF
-
+
8.25KΩ
GND
10
0
Tst Circt for Voltage Amplification
1K
10K
100K
1M
10M
f-FREQUENCY -Hz
Small-Signal Voltage Amplification vs. Frequency
100
10
I
= 10mA
KA
T
= 25°C
A
1KΩ
Output
IKA
50Ω
1
0
GND
Test Circuit for Reference Impedance
1K
10K
100K
1M
10M
f-FREQUENCz
erence Impedance vsFrequency
7 of 17
www.diodes.com
September 2014
© Diodes Incorporated
AP431/AP431A
Document number: DS31002 Rev. 21 - 2
NOT RECOMMENDED FOR NEW DESIGN
USE AS431
AP431/AP431A
Typical Performance Characteristics (cont.)
6
5
4
3
2
T
= 25°C
A
Input
220Ω
50Ω
Output
Pulse
Generator
f = 100kHz
Output
GND
1
0
Test Circuit for Pulse Response
-1
0
1
2
3
4
5
6
7
t- TIME (µs)
Pulse Response
100
90
150Ω
T
= 25°C
A V = V
KA
A
REF
B V = 5V
KA
C V = 10V
KA
D V = 15V
80
70
KA
IKA
B
Stabl
+
VBATT
CL
-
60
50
C
Stable
A
40
30
Test Circuit for Curve A
D
20
10
0
IKA
150Ω
R1 = 10KΩ
0.
0.01
1
10
CL - LOAD ANCE (µF)
Stability Boonditions†
CL
+
-
†
The areas under the curves represent conditions that may cause
VBATT
R2
the device to oscilate. For cuves B, C, and D, R2 and V+ were
adjusted to establish the initial VKA and IKA conditions with CL = 0.
VBATT and CL were then adjusted to determine the ranges of
stability.
Test Circuit for Curve B, C, and D
8 of 17
www.diodes.com
September 2014
© Diodes Incorporated
AP431/AP431A
Document number: DS31002 Rev. 21 - 2
NOT RECOMMENDED FOR NEW DESIGN
USE AS431
AP431/AP431A
Application Examples
VIN
VIN
IOUT
RCL
VIN
R1B
R1A
R
R2A
R2B
+
N
OFF
LED on when Low Limit < VIN < High Limit
Low Limit ≈ VREF (1 + R1B/R2B)
VIN
Delay = RC x ln
)
IOUT = VREF /RCL
Fig 6. Current Limiter or Current Source
(
VIN - VREF
High Limit ≈ VREF (1 + R1A/R2A)
Fig 5. Delay Timer
Fig. 4 Voltage Monitor
VIN
VIN
VIN
IOUT
VOT
VOUT
PULSE
R
1
R
1
R
2
RS
Limit ≈ (1 + R1/R2) x VREF
IOUT = VREF / RS
VOT = (1 + R1R2) x VREF
Fig. 9 Crow Bar
Fig. 7 Constant-Curre
VIN
Fig. 8 Higher-Current Shunt Regulator
R1A
R1B
Output ON when
Low Limit < VIN < High Limit
+
VBE
R2B
R2A
Low Limit ≈ VREF (1 + R1B/R2B) + VBE
High Limit ≈ VREF (1 + R1A/R2A)
Fig. 10 Over-Voltage/ Under-Voltage Protection Circuit
Note:
12. Online application note, “Design Consideration with AP431 when used as a Comparator”
URL: http://www.diodes.com/_files/products_appnote_pdfs/AN78.pdf
9 of 17
www.diodes.com
September 2014
© Diodes Incorporated
AP431/AP431A
Document number: DS31002 Rev. 21 - 2
NOT RECOMMENDED FOR NEW DESIGN
USE AS431
AP431/AP431A
Ordering Information
AP431 X XX X - X
Reference Voltage
Tolerance
Package
Lead-Free
Packing
SA : SOT23
SR : SOT23R
Q : SOT25
W : SC59
L : Lead Free
G : Green (Note 8)
7 : Tape & Reel (Note 11)
13 : Tape & Rote 11)
13R : Tape & Re 11)
Blank : ±1%
A : ±0.5%
R : SC59R
Blank : SO-8
Y : SOT89
7”/13 Tape and Reel
Ammo Box
Part Number
Package Code
(Note 10)
Packaging
Part Number Suffix
Part Number
Quantity
Quantity
(Note 11)
Suffix
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
AP431(A)SAG-7
AP431(A)SRG-7
AP431(A)QL-7
AP431(A)QG-7
AP431AWL-7
SA
SR
Q
SOT23
SOT23R
SOT25
SOT25
SC59
3000/Tape & Reel
3000/Tape & Reel
3000/Tape & Reel
3000/Tape & Reel
3000Tape & Reel
3000/Tape & Reel
ape & Reel
pe & Reel
ape & Reel
2500/Tape & Reel
2500/Tape & Reel
4000/Tape & Reel
-7
-7
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
Pb
Lead-Free
-7
Q
-7
Pb
Lead-Free
W
W
R
-7
AP431(A)WG-7
AP431(A)RL-7
AP431(A)RG-7
AP431(A)G-13
AP431(A)YL-13
AP431(A)YG-13
AP431(A)YG-13R
SC59
-7
Pb
Lead-Free
SC59R
SC59R
SO-8
7
R
-13
-13
-13
-13R
Pb
Lead-Free
Y
Y
Y
SOT89
SOT89
SOT89
Notes:
8. SO-8, SOT23 and SOT23R are ailable in “Green” proucts only.
9. Suffix “A” denotes AP4vice.
10. Details of tape and rs can be seen in document A2007, hich can be found on our website at
http://www.diodes.com/sheets/ap02007.pdf
10 of 17
www.diodes.com
September 2014
© Diodes Incorporated
AP431/AP431A
Document number: DS31002 Rev. 21 - 2
NOT RECOMMENDED FOR NEW DESIGN
USE AS431
AP431/AP431A
Marking Information
(1) SC59 and SC59R
( Top View )
3
XX : Identification code
Y : Year 0~9
W : Week : A~Z : 1~26 week;
a~z : 27~52 week; z represents
52 and 53 week
XX Y W X
X : A~Z : Green
1
2
a~z : Lead Free
(2) SOT23 and SOT23R
( Top View )
3
XX : Identification cod
Y : Year 0~9
W : Week : A~Z : 1~26 week;
a~z : 2752 week; z represents
52 and 53 week
XX Y W X
X : A~Z Green
1
2
(3) SOT25
( Top View )
5
4
X : Identification ce
Y : Year 0~9
W X
XX Y
2
W : Week : A~Z : 1~26 week;
a~z : 27~52 week; z represents
52 an53 week
X : A~Z : Green
3
a~z : Lead Free
(4) SO-8
11 of 17
www.diodes.com
September 2014
© Diodes Incorporated
AP431/AP431A
Document number: DS31002 Rev. 21 - 2
NOT RECOMMENDED FOR NEW DESIGN
USE AS431
AP431/AP431A
Marking Information (cont.)
(5) SOT89
( Top View )
XX : Identification code
Y : Year : 0~9
X X
Y W
W : Week : A~Z : 1~26 week;
X
a~z : 27~52 week;
z represents 52 and 53 week
X : Internal code
1
2
3
A~Z: Green
a~z : Lead Free
Identification Code Table
Device
AP431SA
AP431ASA
AP431SR
AP431ASR
AP431Q
Package (Note 11)
SOT23
Identification Cde
Date Code
D1
D2
D5
D6
A2
A3
A6
A7
A
A4
A5
YM
YM
YM
YM
YM
YM
YM
YM
YM
YM
YM
YM
SOT23
SOT23R
SOT23R
SOT25
AP431AQ
AP431W
AP431AW
AP431R
SOT25
SC59
SC59
SC59
AP431AR
AP431Y
SC5
SOT89
AP431AY
SOT89
Note: 11. For Packaging Details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf.
12 of 17
www.diodes.com
September 2014
© Diodes Incorporated
AP431/AP431A
Document number: DS31002 Rev. 21 - 2
NOT RECOMMENDED FOR NEW DESIGN
USE AS431
AP431/AP431A
Package Outline Dimensions (All dimensions in mm.)
Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for latest version.
(1) SOT25
A
SOT25
Dim Min Max Typ
A
B
C
D
H
J
K
L
M
N
α
0.35 0.50 0.38
1.50 1.70 1.60
2.70 3.00 2.80
B C
0.95
2.90 3.10 3.00
0.013 0.10 0.05
1.00 1.30 1.10
0.35 0.55 0.40
0.10 0.20 0.15
0.70 0.75
H
K
J
M
N
0°
L
D
All Dimensim
(2) SO-8
SO-8
Dim
A
A1
2
Min
-
0.10
1.30
0.5
0.3
Ma
1.75
0.20
1.50
0.25
0.5
E1
E
Gauge Plne
eating Plne
A1
L
Detail ‘A
E
E1
e
4.85
5.90
3.85
4.95
6.10
3.95
h
°
45
Detail A’
A2
A3
A
1.27 Typ
h
L
θ
-
0.35
0.82
8°
b
e
0.62
0°
D
All Dimensions in mm
(3) SC59 and SC59R
A
SC59
Dim
Min Max Typ
0.35 0.50 0.38
1.50 1.70 1.60
2.70 3.00 2.80
A
B
C
D
G
H
J
G
H
-
-
-
-
0.95
1.90
2.90 3.10 3.00
0.013 0.10 0.05
1.00 1.30 1.10
0.35 0.55 0.40
0.10 0.20 0.15
0.70 0.80 0.75
K
J
M
N
K
L
M
N
α
L
D
0°
8°
-
All Dimensions in mm
13 of 17
www.diodes.com
September 2014
© Diodes Incorporated
AP431/AP431A
Document number: DS31002 Rev. 21 - 2
NOT RECOMMENDED FOR NEW DESIGN
USE AS431
AP431/AP431A
Package Outline Dimensions (cont.) (All dimensions in mm.)
Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for latest version.
(4) SOT23 and SOT23R
A
SOT23
Dim Min Max Typ
A
B
C
D
F
G
H
J
0.37 0.51 0.40
1.20 1.40 1.30
2.30 2.50 2.40
0.89 1.03 0.915
0.45 0.60 0.535
1.78 2.05 1.83
2.80 3.00 2.90
0.013 0.10 0.05
0.903 1.10 1.00
C
B
H
G
M
K
J
K1
K
K1
L
D
-
-
0.400
F
L
0.45 1 0.55
0.0.11
M
0°
-
α
All Dimensioin mm
(5) SOT89
D1
C
SOT89
Dim
A
B
B1
C
D
D1
Min
1.40
0.44
0.35
0.35
4.40
162
2.29
Max
1.60
062
0.54
0.44
4.60
1.83
2.60
H1
H
E
B1
L
B
e
8° (4X)
1.50 Typ
H
H1
L
3.94
2.63
0.89
4.25
2.93
1.20
A
All Dimensions in mm
D
14 of 17
www.diodes.com
September 2014
© Diodes Incorporated
AP431/AP431A
Document number: DS31002 Rev. 21 - 2
NOT RECOMMENDED FOR NEW DESIGN
USE AS431
AP431/AP431A
Suggested Pad Layout
Please see AP02001 at http://www.diodes.com/datasheets/ap02001.pdf for the latest version.
(1) SOT25
C2
C2
Dimensions Value (in mm)
Z
3.20
1.60
0.55
0.80
2.40
G
X
C1
G
Y
Y
C1
C2
Z
0.95
X
(2) SO-8
X
Dimensions Value (in mm)
X
Y
1
C2
0.60
155
5.4
C1
1.27
C2
Y
(3) SC59 and SC59R
Y
Dimensions Value (in mm)
Z
X
Y
C
E
3.4
0.8
1.0
2.4
C
1.35
X
E
15 of 17
www.diodes.com
September 2014
© Diodes Incorporated
AP431/AP431A
Document number: DS31002 Rev. 21 - 2
NOT RECOMMENDED FOR NEW DESIGN
USE AS431
AP431/AP431A
Suggested Pad Layout (cont.)
Please see AP02001 at http://www.diodes.com/datasheets/ap02001.pdf for the latest version.
(4) SOT23 and SOT23R
Y
Dimensions Value (in mm)
Z
X
Y
C
E
2.9
0.8
0.9
2.0
Z
C
1.35
E
X
(5) SOT89
X1
Dimensions Value (n mm)
X
0.90
1.733
0.416
1.300
4600
1.475
0.950
1.125
1.500
X2 (2x)
X1
X2
Y
Y1
Y2
Y3
C
Y1
Y3
Y
Y4
Y2
C
X (3x)
16 of 17
www.diodes.com
September 2014
© Diodes Incorporated
AP431/AP431A
Document number: DS31002 Rev. 21 - 2
NOT RECOMMENDED FOR NEW DESIGN
USE AS431
AP431/AP431A
IMPORTANT NOTICE
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes
without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the
application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or
trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall
assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes
Incorporated website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased unauthorized sales
channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized aCustomers shall
indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, orney fees arising
out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauhorized appliation.
Products described herein may be covered by one or more United States, international or foreigatents pending. Product names and
markings noted herein may also be covered by one or more United States, international or foreign ks.
This document is written in English but may be translated into multiple languages for reference. Onlnglish version of this document is
the final and determinative format released by Diodes Incorporated.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support evices or systems without the
express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the
labeling can be reasonably expected to result in significant injury to the u
B. A critical component is any component in a life supe or system whoso perform can be reasonably expected to cause
the
failure of the life support device or to affect its safety or ectiveness.
Customers represent that they have all necessay experte in the safety and regulatory ramifications of their life support devices or systems,
and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their
products and any use of Diodes Incorprated products in such safety-criticalife support devices or systems, notwithstanding any devices- or
systems-related information or support tat may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes
Incorporated and its representatgainst any damages arising out of the use of Diodes Incorporated products in such safety-critical, life
support devices or systems.
Copyright © 2014, Diodes Incorporated
www.diodes.com
17 of 17
www.diodes.com
September 2014
© Diodes Incorporated
AP431/AP431A
Document number: DS31002 Rev. 21 - 2
©2020 ICPDF网 联系我们和版权申明