AP432L-U [DIODES]
Three Terminal Voltage Reference, 1 Output, 1.24V, Trim/Adjustable, PDSO8, ROHS COMPLIANT, SOP, 8 PIN;型号: | AP432L-U |
厂家: | DIODES INCORPORATED |
描述: | Three Terminal Voltage Reference, 1 Output, 1.24V, Trim/Adjustable, PDSO8, ROHS COMPLIANT, SOP, 8 PIN 光电二极管 |
文件: | 总13页 (文件大小:289K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
AP432/AP432A
ADJUSTABLE PRECISION SHUNT REGULATOR
General Description
Features
•
Precision reference voltage
The AP432/432A are 3-terminal adjustable precision shunt
regulators with guaranteed stable temperature over the
applicable extended commercial temperature range. The output
voltage may be set at any level greater than 1.24\/ (VREF) up to
20V merely by selecting two external resistors that act as a
voltage divider network. These devices have a typical output
impedance of 0.2Ω. Active output circuitry provides very sharp
turn-on characteristics, making these devices excellent improved
replacements for Zener diodes in many applications.
AP432 : 1.24V ± 1%
AP432A : 1.24V ± 0.5%
Sink current capability: 200mA
•
•
•
•
•
•
•
•
Minimum cathode current for regulation: 150µA
Equivalent full-range temp coefficient: 30 ppm/oC
Fast turn-on Response.
Low dynamic output impedance: 0.2Ω
Programmable output voltage to 20V
Low output noise
Packages: SOT89-3L, TO92-3L, SOP-8L, SOT23,
SOT25, SC-59
SOT23 and SC-59: Available in “Green” Molding
Compound (No Br, Sb)
The precise +/- 1% reference voltage tolerance of the
AP432/432A make it possible in many applications to avoid the
use of a variable resistor, consequently saving cost and
eliminating drift and reliability problems associated
•
•
Lead Free Finish/RoHS Compliant for Lead Free
and “Green” products (Note 2)
Ordering Information
X
X
X
X
AP 432
Package
Reference Voltage
Packing
Tube
Lead-Free
Tolerance:
Blank: +/- 1%
Blank : SOP-8L
L : Lead Free Package
G : Green (Note 1)
-U
-7/-13
-A
:
Y
V
SA
W
R
: SOT89-3L
: TO92-3L
: SOT23
: SC59
:
:
Taping
Ammo Box
A
: +/- 0.5%
(Note 3)
-B : Bulk (Note 4)
:
SC59
:
Q
SOT25
Note:
1. Green is for SOT23 and SC-59.
2. RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex Notes 5 and 7.
7” Tape and Reel 13” Tape and Reel
Part
Quantity Number Quantity Quantity Number Number Quantity Number
Ammo Box
Part Part
Bulk
Part
Device Package Packaging
(Note 5)
Code
(Note 6)
Suffix
Suffix
Suffix
Suffix
AP432(A)SA
AP432(A)Q
AP432(A)W
AP432(A)R
AP432(A)
3000/Tape
& Reel
3000/Tape
& Reel
3000/Tape
& Reel
3000/Tape
& Reel
-7
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
SA
Q
SOT23
SOT25
SC59
-7
-7
NA
NA
NA
NA
NA
-13
-13
-A
NA
NA
NA
NA
NA
-B
Lead-free
NA
W
R
-7
NA
NA
SC59
NA
NA
NA
NA
2500/Tape &
Reel
2500/Tape &
Reel
NA
NA
Lead-free
Lead-free
Lead-free
SOP-8L
AP432(A)Y
AP432(A)V
NA
NA
NA
NA
Y
V
SOT89-3L
TO92-3L
NA
2000/Box
1000
Notes: 3. Ammo Box is for TO92-3 Spread Lead.
4. Bulk is for TO92-3 Straight Lead.
5. Suffix “A” denotes AP432A device.
6. Pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at
http://www.diodes.com/datasheets/ap02001.pdf.
AP432/AP432A Rev. 3
1 of 13
OCTOBER 2006
www.diodes.com
© Diodes Incorporated
AP432/AP432A
ADJUSTABLE PRECISION SHUNT REGULATOR
Typical Application Circuit
VIN
VOUT
+
+
R1
Cin
Cout
AP432
R2
VOUT = (1+R1/R2)VREF
Precision Regulator
Symbol
Block Diagram
Cathode (C)
REF (R)
+
-
REF (R)
VREF
Anode (A)
Anode (A)
AP432/AP432A Rev. 3
2 of 13
OCTOBER 2006
www.diodes.com
© Diodes Incorporated
AP432/AP432A
ADJUSTABLE PRECISION SHUNT REGULATOR
Pin Connections
Pin Configuration (Top View )
Package
SOP-8L
Pin Configuration (Top View )
Package
SOT25
1
2
3
4
8
7
REF
NC
NC
1
2
3
CATHODE
ANODE
5 ANODE
4 REF
ANODE
ANODE
6
5
ANODE
NC
CATHODE
NC
3 REF
3 REF
SC-59
(Package
Code-W)
23
SOT
ANODE 1
ANODE
1
2 CATHODE
2 CATHODE
3 Cathode
2 Anode
1 REF
3 CATHODE
2 REF
SC-59
(Package
Code -R)
SOT89-3L
ANODE
1
+
+
+
3 Cathode
2 Anode
1 REF
TO92-3L
Absolute Maximum Ratings
Cathode Voltage……………....……...........…..........……………………………………...…………………………………………….…….20V
Continuous cathode current ………………………………......................……………………………………………………...-10mA ~ 250mA
Reference input current range ………………………...….………....................……………………………………………………………10mA
Operating temperature range..…..…….…………………………………………………………………………………..………… -20oC ~ 85oC
Lead Temperature……………….…………….…..……………………………………………………………...………………..……........260oC
Storage Temperature ……………………..............…......………………….......…………………………………………...........-65oC ~ 150oC
Power Dissipation (Notes 7, 8)
SOT23 Package…………………………………………………………………………………. 250mW
SOT25 Package .………….....…………………….....…....………………...…......….…....... 250mW
SC59 Package......................................................................………………....……........…. 400mW
SOP-8L Package ……………..…………….......……………………………………...…....…. 600mW
SOT89-3L Package ...................................................................………………....……....... 800mW
TO92-3L Package……………………………………………………………………………….. 780mW
Note 7: TJ, max =150oC.
Note 8: Ratings apply to ambient temperature at 25oC.
AP432/AP432A Rev. 3
3 of 13
OCTOBER 2006
www.diodes.com
© Diodes Incorporated
AP432/AP432A
ADJUSTABLE PRECISION SHUNT REGULATOR
Electrical Characteristics ( TA = 25oC, V+ = +5.0V, unless otherwise stated )
Parameter
Reference Voltage
Test conditions
Symbol
Min.
1.227
1.233
Typ.
Max.
1.252
1.246
Unit
VKA = Vref,
AP432
VREF
1.24
V
I KA = 10mA (Fig.1)
AP432A
Deviation of Reference Input Voltage over
Temperature (Note 9)
VKA = VREF , IKA = 10mA ,
VREF
3.0
20
mV
Ta = full range
(Fig.1)
VKA = 20 ~VREF
∆V
REF
Ratio of the Change in Reference Voltage to IKA = 10mA
the Change in Cathode Voltage
-1.4
1.4
0.4
-2.0
3.5
1.2
mV/V
µA
(Fig.2)
∆V
KA
R1 = 10KΩ,R2 = ∞
IKA= 10mA (Fig.2)
R1 = 10KΩ,R2 = ∞
IKA = 10mA
Reference Input Current
IREF
Deviation of Reference Input Current over
Temperature
αIREF
µA
Ta = Full range (Fig.2)
Minimum Cathode Current for Regulation
Off-state Current
VKA = VREF (Fig.1)
VKA = 20V , VREF = 0V (Fig.3)
V KA = VREF
Frequency ≤ 1KHz (Fig.1)
IKA(min)
IKA(off)
0.15
0.1
0.3
1.0
mA
µA
Dynamic Output Impedance (Note 10)
0.2
0.5
Ω
ZKA
VMAX
VMIN
VDEV = VMAX - VMIN
TI
T2
Temperature
Note 9.
Deviation of reference input voltage, VDEV, is defined as the maximum variation of the reference over the full temperature
range. The average temperature coefficient of the reference input voltage αVREF is defined as:
VDEV
(
)⋅106
VREF (25°C)
T2 − T1
ppm
……………………..……………….. (
)
α VREF
=
°C
Where:
T2 – T1 = full temperature change.
αVREF can be positive or negative depending on whether the slope is positive or negative.
Note 10. The dynamic output impedance, RZ, is defined as:
∆VKA
∆IKA
ZKA
=
When the device is programmed with two external resistors R1 and R2 (see Figure 2.), the dynamic output impedance of the overall
circuit, is defined as:
∆v
∆i
R1
R2
'
ZKA
=
≈ZKA (1+
)
AP432/AP432A Rev. 3
4 of 13
OCTOBER 2006
www.diodes.com
© Diodes Incorporated
AP432/AP432A
ADJUSTABLE PRECISION SHUNT REGULATOR
Test Circuits
Input
IN
IN
VKA
IKA
VKA
IKA
VKA
R1
R2
IREF
VREF
IZ(OFF)
VREF
Note:VKA=VREF(1+R1/R2)+IREFxR1
Fig 2. Test Circuit for VKA > VREF
Fig 1. Test Circuit for VKA= VREF
Fig 3. Test Circuit for Off-State Current
AP432/AP432A Rev. 3
5 of 13
OCTOBER 2006
www.diodes.com
© Diodes Incorporated
AP432/AP432A
ADJUSTABLE PRECISION SHUNT REGULATOR
Typical Performance Characteristics
Small-Signal Voltage Amplification vs Frequency
60
50
40
30
20
10
0
IKA=10mA
TA=25oC
Output
232Ω
IKA
15KΩ
9µF
-
+
-
8.25KΩ
GND
Test Circuit for Voltage Amplification
10K
1K
100K
1M
10M
f-Frequency-Hz
Reference Impedance vs Frequency
100
10
1
I
KA=10mA
T =25oC
A
1KΩ
Output
I
KA
50Ω
-
+
GND
Test Circuit for Reference Impedance
0.1
1K
10K
100K
1M
10M
f-Frequency-Hz
150Ω
STABILITY BOUNDARY CONDITIONS†
100
90
80
70
60
50
40
30
20
10
0
TA=25oC
AVKA=V
ref
I
KA
B VKA=5V
+
-
VBATT
C VKA=10V
D VKA=15V
CL
B
Stable
C
Stable
Test Circuit for Curve A
A
D
I
KA
150Ω
R1=10KΩ
CL
+
-
R2
VBATT
0.001
0.01
0.1
1
10
CL-Load Capacitance-µF
The areas under the curves represent conditions that may cause the
device to oscillate. For curves B, C, and D, R2 and V+ were adjusted
to establish the initial VKA and IKA conditions with CL=0.VBATT and
CL were then adjusted to determine the ranges of stability.
Test Circuit for Curve B, C, and D
AP432/AP432A Rev. 3
6 of 13
OCTOBER 2006
www.diodes.com
© Diodes Incorporated
AP432/AP432A
ADJUSTABLE PRECISION SHUNT REGULATOR
Application Examples
VIN
VIN
IOUT
RCL
R
VIN
R1B
R1A
+
ON
R2A
R2B
OFF
VIN
-V
Delay =
RC x ln (
)
IOUT = VREF / RCL
<
<
High Limit
LED on when Low Limit
V
V
IN
IN
REF
≈
Low Limit
High Limit
V
(1+R1B/R2B)
(1+R1A/R2A)
REF
≈
V
REF
Fig. 5 Delay
Timer
Fig. 4 Voltage
Monitor
Fig. 6 Current Limiter or Current
Source
VIN
IOUT
VIN
VOUT
VIN
VOUT
PUSE
R1
R1
R2
R2
RS
LIMIT
(1 + R1/R2) x VREF
VOUT
= (1 + R1/R2) x VREF
IOUT = VREF / RS
Fig. 7 Constant-Current
Sink
Fig. 8 Higher-Current Shunt
Regulator
Fig. 9 Crow Bar
VIN
R1A
R1B
Output ON when
Low Limit <VIN < High Limit
+
VBE
R2A
R2B
(1 + R1B/R2B) +VBE
(1 + R1A/R2A)
Low Limit
High Limit
VREF
VREF
Fig.10 Over-Voltage / Under-Voltage Protection Circuit
AP432/AP432A Rev. 3
7 of 13
OCTOBER 2006
www.diodes.com
© Diodes Incorporated
AP432/AP432A
ADJUSTABLE PRECISION SHUNT REGULATOR
Package Diagrams ( All Dimensions in mm )
(1) SOT25
(2) SC59
0.35/0.50
2.70/3.00
Typ 2.80
2.70/
3.00
TOP VIEW
TOP VIEW
1.90
2.90/3.10
Typ 3.00
2.90/3.10
1.00/
1.30
1.00/1.30
Typ 1.10
0.10/0.20 Typ 0.15
0.10/0.20
0.013/0.10
Typ 0.05
0.013/0.10
Typ Typ
0.95 0.55
0.95
0.35/0.55
0.35/0.55
Typ 0.40
0°/8°
(3) SOT23
(4) SOP-8L
0.37/0.51
TOP VIEW
0.89/
1.03
Gauge Plane
Seating Plane
0.38/1.27
Detail "A"
0.45/0.60
1.80/2.00
2.80/3.00
7°~9°
7°~9°
0.35max.
45°
0.085/0.180
Detail "A"
0.013/
0.10
0.3/0.5
3.70/4.10
0.45/0.61
1.27typ
4.80/5.30
0º/8º
AP432/AP432A Rev. 3
8 of 13
www.diodes.com
OCTOBER 2006
© Diodes Incorporated
AP432/AP432A
ADJUSTABLE PRECISION SHUNT REGULATOR
Package Diagrams (Continued) ( All Dimensions in mm )
(5) SOT89-3L
(6) TO92-3L for Bulk pack
AP432/AP432A Rev. 3
9 of 13
OCTOBER 2006
www.diodes.com
© Diodes Incorporated
AP432/AP432A
ADJUSTABLE PRECISION SHUNT REGULATOR
Package Diagrams (Continued) ( All Dimensions in mm )
(7) TO92-3L for Ammo pack
AP432/AP432A Rev. 3
10 of 13
OCTOBER 2006
www.diodes.com
© Diodes Incorporated
AP432/AP432A
ADJUSTABLE PRECISION SHUNT REGULATOR
Marking Information
(1) SOT23
(Top View)
3
L: Lead Free
G: Green
XX
: Marking code
XX Y M X
Y
: Year: 0-9
1
2
M
: Month: A~L
(2) SC59
(Top View)
3
L: Lead Free
XX
: Marking code
XX Y M X
Y
: Year: 0-9
1
2
M
: Month: A~L
(3)SOT25
5
4
L:Lead Free
XX Y M X
XX : Marking code
Y : Year: 0-9
1
2
3
M : Month: A~L
AP432/AP432A Rev. 3
11 of 13
www.diodes.com
OCTOBER 2006
© Diodes Incorporated
AP432/AP432A
ADJUSTABLE PRECISION SHUNT REGULATOR
Marking Information (continue)
(4)SOP-8L
(Top View)
8
5
Logo
Accuracy
Blank: 1.24 +1 %
A
: 1.24 +0.5 %
AP432
X
L : Lead Free Package
YY WW
X
WW: Nth week
YY : Year
1
4
SOP-8L
(5) SOT89-3L
(
)
Top View
Marking Code
:
:
:
XX
Y
M
X X
Y M X
Year: 0-9
Month: A~L
L : Lead-Free Package
X :
1
2
3
(4) TO92-3L
( Top view )
L: Lead Free Package
AP432
X
Y
: Internal code
: Year
Accuracy
X YWW X X
Blank: 1.24 ±1%
1.24 ± 0.5%
A
:
WW: Nth week
Device
Package (Note 11)
Marking Code
Date Code
AP432SA
AP432ASA
AP432Q
AP432AQ
AP432W
AP432AW
AP432R
AP432AR
AP432Y
SOT23
SOT23
SOT25
SOT25
SC59
SC59
SC59
SC59
SOT89
SOT89
D3
D4
B7
B8
B3
B4
B5
B6
B1
B2
YM
YM
YM
YM
YM
YM
YM
YM
YM
YM
AP432AY
Notes: 11. For Packaging Details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf.
AP432/AP432A Rev. 3
12 of 13
OCTOBER 2006
www.diodes.com
© Diodes Incorporated
AP432/AP432A
ADJUSTABLE PRECISION SHUNT REGULATOR
IMPORTANT NOTICE
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further
notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither
does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will
agreeto hold DiodesIncorporatedand all the companieswhose productsare represented onour website, harmlessagainst all damages.
LIFE SUPPORT
Diodes Incorporated productsare notauthorizedfor use ascriticalcomponentsin lifesupportdevices or systemswithout theexpressed written approval ofthe
PresidentofDiodesIncorporated.
AP432/AP432A Rev. 3
13 of 13
OCTOBER 2006
www.diodes.com
© Diodes Incorporated
相关型号:
AP432M-A-HF
IC THREE TERM VOLTAGE REFERENCE, PDSO8, HALOGEN FREE AND ROHS COMPLIANT, SOP-8, Voltage Reference
A-POWER
AP432M-B-HF
IC THREE TERM VOLTAGE REFERENCE, PDSO8, HALOGEN FREE AND ROHS COMPLIANT, SOP-8, Voltage Reference
A-POWER
AP432N-A-HF
IC THREE TERM VOLTAGE REFERENCE, PDSO3, HALOGEN FREE AND ROHS COMPLIANT, SOT-23, 3 PIN, Voltage Reference
A-POWER
AP432N-B-HF
IC THREE TERM VOLTAGE REFERENCE, PDSO3, HALOGEN FREE AND ROHS COMPLIANT, SOT-23, 3 PIN, Voltage Reference
A-POWER
©2020 ICPDF网 联系我们和版权申明