ATS177_10 [DIODES]
SINGLE OUTPUT HALL EFFECT LATCH; 单输出霍尔效应锁存型号: | ATS177_10 |
厂家: | DIODES INCORPORATED |
描述: | SINGLE OUTPUT HALL EFFECT LATCH |
文件: | 总9页 (文件大小:163K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
ATS177
SINGLE OUTPUT HALL EFFECT LATCH
Description
Pin Assignments
ATS177 is an integrated Hall-Effect latch sensor designed for
electronic commutation of brush-less DC motor applications.
The device includes an on-chip Hall voltage generator for
magnetic sensing, a comparator that amplifies the Hall
voltage, and a schmitt trigger to provide switching hysteresis
for noise rejection, and open-collector output. An internal
bandgap regulator provides a temperature compensated
supply voltage for internal circuits and allows a wide operating
supply range.
(Top View)
3.
2.
DO
GND
Vcc
1.
SIP-3L
Applications
When the magnetic flux density (B) is larger than operate
point (Bop), output is switched on (DO pin is pulled low). The
output state is held on until a magnetic flux density reversal
falls below Brp. When B is less than Brp, the output is
switched off.
•
•
•
•
Brush-less DC Motor
Brush-less DC Fan
Revolution counting
Speed measurement
The ATS177 is available in SIP-3L package.
Features
•
•
•
•
•
•
•
•
•
Bipolar Hall-Effect latch sensor
3.5V to 20V DC operating voltage
Temperature compensation
Open-collector pre-driver
25mA maximum output sink current
Built-in reverse polarity protection
Operating temperature: -40°C to +125°C
SIP-3L package
Green Molding Compound (No Br, Sb) (Note 1)
Notes: 1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied. Please visit our website at
http://www.diodes.com/products/lead_free.html.
Typical Application Circuit
+12V
D1
L1
R1
2K
L2
U1
R2
3K
1
3
Q1
NPN
Q2
NPN
VCC OUTPUT
GND
ATS177
2
+
+
C2
0.47uF
C1
0.47uF
Brush-less DC Fan
1 of 9
www.diodes.com
July 2010
© Diodes Incorporated
ATS177
Document number: DS31055 Rev. 6 - 2
ATS177
SINGLE OUTPUT HALL EFFECT LATCH
Pin Descriptions
Pin name
P/I/O
Pin #
Description
Vcc
GND
DO
P
P
O
1
2
3
Positive power supply
Ground
Digital output
Functional Block Diagram
Vcc
1
Regulator
Hall
plate
3 DO
Amp
GND
2
Absolute Maximum Ratings (TA = 25°C)
Symbol
Characteristics
Rating
Unit
VCC
VRCC
B
Supply Voltage
Reverse VCC Polarity Voltage
Magnetic Flux Density
20
-20
Unlimited
V
V
VCE
PD
IC
TJ(MAX)
TS
Output OFF Voltage
Package Power Dissipation
Output “ON” Current
Maximum Junction Temperature
Storage Temperature Range
30
550
25
V
SIP-3L
Continuous
mW
mA
°C
150
-65~+150
°C
Recommended Operating Conditions
Symbol
Characteristic
Supply Voltage
Operating Ambient Temperature
(Note 2)
Conditions
Min
Max
Unit
VCC
Operating
3.5
-20
20
V
TA
Operating
85
°C
Notes: 2. Shall not exceed PD and Safety Operation Area.
2 of 9
www.diodes.com
July 2010
© Diodes Incorporated
ATS177
Document number: DS31055 Rev. 6 - 2
ATS177
SINGLE OUTPUT HALL EFFECT LATCH
Electrical Characteristics (TA = 25°C)
Symbol
Characteristic
Test Conditions
Min
Typ. Max Unit
VCE (sat) Output Saturation Voltage VCC = 14V, Ic = 20mA
-
-
-
-
-
300
<0.1
5
0.3
0.3
700
10
10
1.5
1.5
mV
uA
mA
us
Icex
Icc
tr
Output Leakage Current
Supply Current
Output Rise Time
Output Falling Time
VCE = 14V, VCC = 14V
VCC = 20V, Output Open
VCC = 14V, RL = 820Ω, CL = 20pF
VCC = 14V, RL = 820Ω, CL = 20pF
tf
us
Test Circuit
14V
DO
RL
CL
RL=820 Ohm
CL=20 pF
Test Circuit
3 of 9
www.diodes.com
July 2010
© Diodes Incorporated
ATS177
Document number: DS31055 Rev. 6 - 2
ATS177
SINGLE OUTPUT HALL EFFECT LATCH
Magnetic Characteristics (TA = 25°C, Note 3)
(1mT=10 Gauss)
A grade
Symbol
Parameter
Min
Typ.
Max
Unit
Bops(south pole to brand side)
Brps(south pole to brand side)
Bhy(|Bopx|-|Brpx|)
Operation Point
Release Point
Hysteresis
5
-70
-
-
-
80
70
-5
-
Gauss
Gauss
Gauss
B grade
Symbol
Parameter
Min
Typ.
Max
Unit
Bops(south pole to brand side)
Brps(south pole to brand side)
Bhy(|Bopx|-|Brpx|)
Operation Point
Release Point
Hysteresis
-
-100
-
-
-
80
100
-
-
Gauss
Gauss
Gauss
Notes: 3. Magnetic characteristics may vary with supply voltage, operating temperature and after soldering.
DO
12
OFF
RP
OP
10
8
6
4
2
ON
Vsat
-200
-100
0
100
200
Magnetic Flux Density in Gauss
Typical Magnetic Switch Point vs. Temperuture
100
50
0
Bop
Brp
Bhys
-50
-20
25
80
100
Temperature (oC)
4 of 9
www.diodes.com
July 2010
© Diodes Incorporated
ATS177
Document number: DS31055 Rev. 6 - 2
ATS177
SINGLE OUTPUT HALL EFFECT LATCH
Performance Characteristics
(1) SIP-3L
25
50
60
70
80
85
286
130
88
90
264
135
66
95
242
140
44
100
220
150
0
TA (°C)
PD (mW)
550
105
198
440
110
176
396
115
154
352
120
132
308
125
110
TA (°C)
PD (mW)
P (mW)
D
Power Dissipation Curve
600
500
400
300
200
100
0
-40
25
50
75
100
125
150
85
T (oC)
A
5 of 9
www.diodes.com
July 2010
© Diodes Incorporated
ATS177
Document number: DS31055 Rev. 6 - 2
ATS177
SINGLE OUTPUT HALL EFFECT LATCH
Ordering Information
ATS177 - X X - X - X
Magnetic
Packing
Package
Lead Free
Characteristics
P : SIP-3L
L : Lead Free
G : Green (Note 4)
A or B
A : Ammo Box (Note 7)
B : Bulk (Note 8)
7 : Tape & Reel
Tube/Bulk
Part
Quantity Number
Suffix
7” Tape and Reel
Part
Ammo Box
Magnetic
Characteristics
Packaging
Package
Code
Part
Number
Suffix
Device
(Note 5, 6)
Quantity
Number Quantity
Suffix
ATS177-PL-A-A
ATS177-PL-A-B
ATS177-PG-A-A
ATS177-PG-A-B
ATS177-PL-B-A
ATS177-PL-B-B
ATS177-PG-B-A
ATS177-PG-B-B
P
P
P
P
P
P
P
P
SIP-3L
SIP-3L
SIP-3L
SIP-3L
SIP-3L
SIP-3L
SIP-3L
SIP-3L
NA
NA
NA
NA
NA
NA
-B
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
4000/Box
4000/Box
4000/Box
4000/Box
NA
-A
A
B
A
B
A
B
A
B
-A
NA
-A
NA
-A
1000
1000
1000
1000
NA
NA
NA
NA
-B
NA
-B
NA
-B
NA
Notes:
4. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied. Please visit our website at
http://www.diodes.com/products/lead_free.html.
5. Pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at
http://www.diodes.com/datasheets/ap02001.pdf.
6. Reverse taping as shown on Diodes Inc. Surface Mount (SMD) Packaging document AP02007, which can be found on our
website http://www.diodes.com/datasheets/ap02007.pdf.
7. Ammo Box is for SIP-3L Spread Lead.
8. Bulk is for SIP-3L Straight Lead.
Marking Information
(1) SIP-3L
(Top View)
Y : Year : 0~9
WW : Week : 01~52, "52" represents
Part Number
177
Y WW X
52 and 53 week
X : Internal Code : A~Z : Green
a~z : Lead Free
6 of 9
www.diodes.com
July 2010
© Diodes Incorporated
ATS177
Document number: DS31055 Rev. 6 - 2
ATS177
SINGLE OUTPUT HALL EFFECT LATCH
Package Outline Dimensions (All Dimensions in mm)
(1) Package Type: SIP-3L for Bulk pack
0.51mm
NOM
2.00 +/-
0.10mm
1.15 +/-
0.10mm
BRANDED
SURFACE
1
2
3
Active Area Depth
Sensor Location
Package Dimension
7 of 9
www.diodes.com
July 2010
© Diodes Incorporated
ATS177
Document number: DS31055 Rev. 6 - 2
ATS177
SINGLE OUTPUT HALL EFFECT LATCH
Package Outline Dimensions (Continued)
(2) Package Type: SIP-3L for Ammo pack
8 of 9
www.diodes.com
July 2010
© Diodes Incorporated
ATS177
Document number: DS31055 Rev. 6 - 2
ATS177
SINGLE OUTPUT HALL EFFECT LATCH
IMPORTANT NOTICE
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS
DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other
changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability
arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any
license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described
herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies
whose products are represented on Diodes Incorporated website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized
sales channel.
Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall
indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees
arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign patents pending. Product names
and markings noted herein may also be covered by one or more United States, international or foreign trademarks.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without
the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided
in the labeling can be reasonably expected to result in significant injury to the user.
B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected
to cause the failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or
systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements
concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems,
notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further,
Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes
Incorporated products in such safety-critical, life support devices or systems.
Copyright © 2010, Diodes Incorporated
www.diodes.com
9 of 9
www.diodes.com
July 2010
© Diodes Incorporated
ATS177
Document number: DS31055 Rev. 6 - 2
相关型号:
ATS184-1
Series - Fundamental Quartz Crystal, 18.432MHz Nom, ROHS COMPLIANT, RESISTANCE WELD, METAL PACKAGE-2
CTS
ATS184-INS
Series - Fundamental Quartz Crystal, 18.432MHz Nom, ROHS COMPLIANT, RESISTANCE WELD, METAL PACKAGE-2
CTS
©2020 ICPDF网 联系我们和版权申明