S1528TMCB-1.5000 [DIODES]
Oscillator, 1.5MHz Min, 27MHz Max, 1.5MHz Nom, Hybrid,;型号: | S1528TMCB-1.5000 |
厂家: | DIODES INCORPORATED |
描述: | Oscillator, 1.5MHz Min, 27MHz Max, 1.5MHz Nom, Hybrid, |
文件: | 总2页 (文件大小:104K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SaRonix
Voltage Controlled Crystal Oscillator
CMOS / TTL
S1528 Series
Technical Data
Frequency Range:
1.5 MHz to 27 MHz
50 ppm over all conditionsꢀ operating temperature, voltage change,
Frequency Stability:
load change, calibration tolerance, aging, with V = 2.5V
C
Temperature Range:
Operatingꢀ
Storageꢀ
0 to +70°C, 0 to +85°C, -40 to +85°C
-55 to +125°C
Supply Voltage:
Recommended Operatingꢀ
5V 5ꢁ
Supply Current:
Output:
20mA typ, 30mA max @ 25°C, 40mA max @ operating temp range
Symmetryꢀ
Rise & Fall Timesꢀ
See Part Numbering Guide and Output Waveform
ACTUAL SIZE
5ns max, 20ꢁ to 80ꢁ V
CMOS
DD,
4ns max, 0.4V to 2.4 VDC, TTL
10ꢁ V max for CMOS or 0.4 VDC max for TTL
Description
Logic 0ꢀ
Logic 1ꢀ
Loadꢀ
DD
-0.6 VDC for CMOS or 2.4 VDC min for TTL
V
CC
A voltage controlled crystal oscillator
providing precise rise and fall times to
drivehighperformanceapplications.The
device is packaged in a 6-pin, SMD, J
leaded package. The plastic molded sur-
face mountable package is ideal for to-
day'sautomatedassemblyenvironments.
50pF or 10 TTL
8ps max
Period Jitter RMSꢀ
Pull Characteristics:
Input Impedanceꢀ
Frequency Response (-3dB)ꢀ
Pullabilityꢀ
50KΩ min
20kHz
20, 50, 70, 100 ppm APRꢂ (See Part Numbering Guide)
0.5 to 4.5V
Frequency increases when Control Voltage increases
10ꢁ max
2.5V
Control Voltageꢀ
Transfer Functionꢀ
Linearityꢀ
Applications
Center Control Voltageꢀ
• For use with phase-locked loop (PLL)
for clock and data recovery, frequency
translation, or frequency synthesis ap-
plications in video, telephony, and data
communication environments.
• Plastic molded, J-lead SMD package
• TTL and CMOS compatible
• Tri-state output
• For frequencies above 27 MHz, see
SaRonix S1518 Series
• Availableas3.3Vversion,seeSaRonix
S1328 Series
Mechanical:
Shockꢀ
Solderabilityꢀ
Terminal Strengthꢀ
Vibrationꢀ
MIL-STD-883, Method 2002, Condition B
MIL-STD-883, Method 2003
MIL-STD-202, Method 211, Conditions A & C
MIL-STD-883, Method 2007, Condition A
MIL-STD-202, Method 210, Condition I or J
Resistance to Soldering Heatꢀ
Environmental:
Thermal Shockꢀ
Moisture Resistanceꢀ
MIL-STD-883, Method 1011, Condition A
MIL-STD-883, Method 1004
• Available on tape & reel; 24mm tape,
500pcs per reel
Output Waveform
CMOS
TTL
Tr
Tf
Tr
Tf
VDD
1 LEVEL
80% VDD
2.5 VDC
1.5 VDC
0.5 VDC
50% VDD
20% VDD
0 LEVEL
GND
SYMMETRY
SYMMETRY
* APR = (VCXO Pull relative to specified Output Freq. @ nominal control voltage) – (VCXO Freq. Stability)
DS-147 REV C
SaRonix
141 Jefferson Drive • Menlo Park, CA 94025 • USA • 650-470-7700 • 800-227-8974 • Fax 650-462-9894
SaRonix
Voltage Controlled Crystal Oscillator
CMOS / TTL
S1528 Series
Technical Data
Tri-State Logic Table
Solder Reflow Guide
Reflow 240°C max
250
Pin 2 Input
Pin 4 Output
4°C/sec max
200
Logic 1 or NC
Oscillation
Preheat 183 10°C
Cooling
High Impedance or
Standby Function
150
Logic 0 or GND
4°C/sec max
Required Input Levels on Pin 2:
Logic 1 = 3.0V min
Logic 0 = 0.5V max
Time
1 – 2 minutes
10 sec max
Package Details
Part Numbering Guide
S1528 C G E A
-
6.1760 (T)
6
5
4
DENOTES
PIN 1
(T) = Tape & Reel
full reel increments only
Series
S1528 = 5V VCXO, J Lead SMD
10.4
.409
8.74
.344
max
Logic Type
T = TTL
C = CMOS
Frequency (MHz)
Symmetry
A = 45/55% max**
B = 40/60% max
1
2
3
Absolute Pull Range
*
Operating Temperature
C = 0 to +70°C
E = 0 to +85°C
13.2
.520
C = 20 ppm
max
G = 50 ppm
H = 100 ppm***
M = 70 ppm
6.1
5.9
.234
L = -40 to +85°C
max
.240
* APR = (VCXO Pull relative to specified Output Freq. @ nominal control voltage) – (VCXO Freq. Stability)
** Not available at all frequencies; TTL 13.5 to 27 MHz only
*** Not available at all frequencies and all operating temperature ranges, please contact SaRonix
0.46
.018
2.54
.100
5.08
Test Circuits
.200
0.51
.020
x45° CHAM
SIMULATED TEST LOAD
V
CC
.75
.030
390
Ω
mA
M
1.50 .15
Pin 6
Pin 1
Pin 5
OSCILLATOR
Pin 2
Pin 4
Pin 3
.059 .006
8.74
.344
0.1 µF
C
= 15 pF
L
POWER
SUPPLY
Pin Functions:
(Note A)
Pin 1: Control Voltage
Pin 2: Tri-State Control
Pin 3: GND
Pin 4: Output
Pin 5: N/C
Pin 6: +5VDC (V
VC
)
CC
mm
TRI-STATE INPUT OR ENABLE/DISABLE
(current limited on fixture)
Scale: None (Dimensions in
)
inches
NOTE A:
C
includes probe and jig capacitance.
L
TTL TEST CIRCUIT
Recommended Land Pattern
mA
M
Pin 6
Pin 5
OSCILLATOR
Pin 2
Pin 4
Pin 3
5.08
.200
0.1 µF
C
= 50 pF (Note A)
L
POWER
SUPPLY
Pin 1
VC
8.74
1.27
.344
.050
2.5
.100
TRI-STATE INPUT OR ENABLE/DISABLE
(current limited on fixture)
2.54
.100
NOTE A:
C includes probe and jig capacitance.
L
HCMOS TEST CIRCUIT
All specifications are subject to change without notice.
DS-147 REV C
SaRonix
141 Jefferson Drive • Menlo Park, CA 94025 • USA • 650-470-7700 • 800-227-8974 • Fax 650-462-9894
相关型号:
©2020 ICPDF网 联系我们和版权申明