S1564AABS-FREQ(T) [DIODES]
PECL Output Clock Oscillator, 65MHz Min, 168MHz Max,;型号: | S1564AABS-FREQ(T) |
厂家: | DIODES INCORPORATED |
描述: | PECL Output Clock Oscillator, 65MHz Min, 168MHz Max, 机械 振荡器 |
文件: | 总2页 (文件大小:969K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Voltage Controlled Crystal Oscillator
3.3V PECL
S1562 / S1564 Series
Technical Data
Frequency Range:
65.00 MHz to 168.00 MHz (S1564)
77.76 MHz to 155.52 MHz (S1562)
Frequency Stability:
±20, ±25, or ±50 ppm over all conditions: operating temperature,
supply voltage change within rating, load change, aging* shock
and vibration.
5 years @ 40°C average ambient operating temperature
* Aging:
Temperature Range:
Operating:
Storage:
0 to +70°C, 0 to +85°C, -40 to +85°C
-55°C to +105°C
Supply Voltage (V ):
+3.3V ±10%
CC
Supply Current:
Output Drive:
65mA typ, 100mA max (S1562)
65mA typ, 70mA max (S1564)
ACTUAL SIZE
Description
Symmetry:
45/55% max @ 50% waveform
Rise & Fall Times:
Logic 0:
550 ps max, 20% to 80% of output waveform
Avoltagecontrolledcrystaloscillatorde-
signed primarily for use in phase locked
loops, SONET/ATM/SDH/DWDM
transport & switch applications. Output
is 10KE LVPECL. Device is packaged
in a 14-pin DIP compatible, resistance
welded package. Case is grounded to Pin
7toreduceEMI.TrueSMDDILversions
for IR reflow available; select option "S"
or "U" in part builder.
≤ V -1.620V
CC
Logic 1:
Load:
Phase Jitter:
Total Jitter:
≥ V -1.025V
CC
50Ω to V -2V (all outputs require termination)
CC
1ps RMS (1-sigma) max, in 12khz ~ 40MHz frequency band
20ps max peak-to-peak, measured in 100,000 random samples
Pull Characteristics:
Input Impedence (Pin 1):
Frequency Response (-3dB):
Pullability:
50KΩ min
10 kHz min
±50 ppm min APR**
0.3V min to 3.0V max
Control Voltage:
Center Control Voltage:
Transfer Function:
Linearity:
1.65V
Applications & Features
Frequency increases when control voltage increases
10% max
1.65 ±0.3V @25°C
• High-frequency, fundamental-mode
crystal design for ultra low jitter and
superb frequency stability over all
conditions
• Excellent frequency reference for OC-
12 (STM-4), OC-48 (STM-16), and
OC-192(STM-64) clock generation or
synchronization
RMT Center Frequency (f ):
0
Output Enable Characteristics:
Output Enable Voltage (Pin 3):
Disable Voltage:
< V - 1.475V or Open
CC
> V - 1.165V (Q Output Disabled to a fixed level of Logic 0)
CC
Mechanical:
Shock:
Solderability:
MIL-STD-883, Method 213, Condition F
MIL-STD-883, Method 2003
• Forward error correction frequencies
are available
• Enable/Disable standard
Positive supply voltage 3.3V ECL
• (PECL), LVDS compatible
• Complementary outputs on S1564
• Single output on S1562
Terminal Strength:
Vibration:
Solvent Resistance:
Resistance to Soldering Heat:
MIL-STD-883, Method 2004, Conditions B2
MIL-STD-883, Method 2007, Condition A
MIL-STD-202, Method 215
MIL-STD-202, Method 210, Condition B (for through-hole)
MIL-STD-202, Method 210, Condition I or J (for Gull Wing and SMD
adapter)
Environmental:
• Wide frequency range from
65 MHz to 168.00 MHz
• ±50 ppm minimum APR**
• GullWing&TrueSMDoptionavailable
for IR reflow
Gross Leak Test:
Fine Leak Test:
Thermal Shock:
MIL-STD-883, Method 1014, Condition C
MIL-STD-883, Method 1014, Condition A2
MIL-STD-883, Method 1011, Condition A
MIL-STD-883, Method 1004
Moisture Resistance:
• SeeS1569Seriesforcomparableperfor-
mace in true SMD 9x14mm package
• See S1566 Series for comparable per-
formance with output frequencies 622
~ 670 MHz
** APR = (VCXO Pull relative to specified Output Frequency) – (VCXO Frequency Stability)
Absolute Pull Range relative to specified nominal frequency
DS-189 REV D
www.pericom.com/saronix
Voltage Controlled Crystal Oscillator
3.3V PECL
S1562 / S1564 Series
Technical Data
Package Details
Part Numbering Guide
ꢟꢐꢠꢡ
ꢑꢔꢚ
S 156 2 A A B
- 77.7600 (T)
ꢠꢢꢟꢣ
Packaging
ꢡꢠꢤꢐ
ꢠꢡꢥꢦ
ꢑꢔꢚ
Model
Frequency (MHz)
Blank = bulk/tube
(T) = tape/reel
(gull wing
ꢪꢉꢞ
ꢋꢪꢌꢏꢋꢊ
PECL VCXO Series
or SMD
only) 200
pc reels
only
ꢣꢠꢧꢧꢨꢡꢠꢣ
ꢠꢟꢟꢧꢨꢠꢡꢟ
Package
Output
ꢡꢠꢩꢦꢨꢠꢡꢢ
ꢠꢡꢐꢢꢨꢠꢡꢡꢥ
Blank = 7.49mm high through hole
K = 7.49mm high, gull wing
L = 5.08mm high through hole
2 = Single w/ Enable (see freq.range)
4 = Complementary w/ Enable
(see freq. range)
ꢐꢣꢠꢟꢩꢨꢠꢐꢥ
ꢠꢦꢡꢡꢨꢠꢡꢡꢣ
�ꢀꢁ ꢃ
�ꢀꢁ ꢘ
�ꢀꢁ ꢆ
S = True SMD adapter (7.57mm high)
U = True SMD adapter (9.85mm high)
Stability Tolerance
AA = ±20 ppm, 0 to +70°C
A = ±25 ppm, 0 to +70°C
Linearity
B = 10% max
ꢐꢥꢠꢡ
ꢠꢣꢐꢡ
ꢑꢔꢚ
ꢧꢠꢧꢣ
ꢠꢥꢡꢣ
ꢑꢔꢚ
B = ±50 ppm, 0 to +70°C
E = ±50 ppm, -40 to +85°C
G = ±50 ppm, 0 to +85°C
Pullability (APR)*
A = ±50 ppm min
�ꢀꢁ ꢃꢅ
�ꢀꢁ ꢃꢄ
ꢣꢠꢡꢢ
ꢠꢟꢡꢡ
�ꢀꢁ ꢂ
*APR = (VCXO Pull relative to specified Output Frequency) – (VCXO Frequency Stability)
Absolute Pull Range relative to specified nominal frequency
ꢇꢈꢉꢉ ꢊꢀꢁꢋ �ꢌꢍꢎꢌꢋꢏ
ꢐꢠꢧꢢ
ꢌꢜꢪ
Test Circuit
ꢠꢡꢧꢡ
ꢙ
ꢔꢊꢋꢐꢌꢊꢎꢍ ꢓꢈꢉ�ꢐ
ꢋꢐꢌꢚꢔꢊꢎꢋꢔꢉꢊ
ꢋꢉ ꢏꢊꢛ
ꢘꢆ
�
ꢄꢃꢅꢆꢇ
ꢐꢥꢠꢩꢦꢨꢠꢟꢣ
ꢠꢣꢥꢡꢨꢠꢡꢐꢡ
�ꢀꢁ ꢂꢕ
�ꢀꢁ ꢂꢃ
�ꢀꢁ ꢖ
�ꢀꢁ ꢗ
ꢙ
ꢘꢆ
�
ꢔꢊꢋꢐꢌꢊꢎꢍ ꢓꢈꢉ�ꢐ
ꢋꢐꢌꢚꢔꢊꢎꢋꢔꢉꢊ
ꢋꢉ ꢏꢊꢛ
ꢉꢓꢈꢔꢍꢍꢎꢋꢉꢌ
�ꢀꢁ ꢒ
�ꢀꢁ ꢐꢈꢁꢍꢑꢀꢒꢁꢓꢔ
�ꢐꢣꢦꢟ
�ꢀꢁ ꢂ
ꢎꢏꢊ ꢐꢖ ꢇꢋꢊꢌꢞꢋꢕ ꢆꢋꢕꢌꢔꢮꢉ
ꢎꢏꢊ ꢥꢖ ꢙꢊꢔꢯꢕꢉ
ꢎꢏꢊ ꢧꢖ ꢰꢃꢈ ꢭ ꢇꢔꢍꢉ
ꢎꢏꢊ ꢢꢖ ꢫ ꢂꢬꢌꢪꢬꢌ
ꢎꢏꢊ ꢐꢟꢖ ꢃꢭꢇ
ꢎꢏꢊ ꢐꢩꢖ �ꢬꢪꢪꢕꢜ ꢆꢋꢕꢌꢔꢮꢉ
ꢈꢉꢊꢋꢌꢉꢍ
ꢇꢉꢍꢋꢎꢏꢐ
ꢑꢒꢅꢆꢇ
�ꢐꢣꢦꢩ
ꢎꢏꢊ ꢐꢖ ꢇꢋꢊꢌꢞꢋꢕ ꢆꢋꢕꢌꢔꢮꢉ
ꢎꢏꢊ ꢥꢖ ꢙꢊꢔꢯꢕꢉ
ꢎꢏꢊ ꢧꢖ ꢰꢃꢈ ꢭ ꢇꢔꢍꢉ
ꢎꢏꢊ ꢢꢖ ꢫ ꢂꢬꢌꢪꢬꢌ
ꢎꢏꢊ ꢐꢟꢖ ꢫ ꢂꢬꢌꢪꢬꢌ
ꢎꢏꢊ ꢐꢩꢖ �ꢬꢪꢪꢕꢜ ꢆꢋꢕꢌꢔꢮꢉ
ꢐꢊꢎꢜꢍꢐ ꢝ ꢛꢔꢓꢎꢜꢍꢐ
ꢕꢌꢖꢎꢀꢁꢋ ꢐꢒꢖꢗꢌꢑ ��
ꢄꢊꢒꢕꢬꢱꢉꢍ ꢈꢔꢌꢉ ꢇꢋꢱꢉꢲ ꢳꢞꢉꢴꢬꢉꢊꢒꢜ ꢵ ꢎꢔꢞꢌ ꢃꢬꢑꢯꢉꢞ
* Note: Test Configuration depicts S1564 Series. Pin 12 is not connected for S1562 Series.
�ꢀꢁꢂꢃꢄꢅ
ꢆꢇꢅꢂ
Output Waveforms
Solder Reflow
�ꢀꢁꢂꢃꢄ ꢅꢆꢇ ꢈꢇꢉꢊ
ꢊꢃꢃꢂꢝꢞꢟ
ꢅꢇꢒ
ꢅꢒꢒ
ꢍꢆꢉꢇꢎ ꢏ
ꢕꢒꢔ
ꢊ
ꢌꢇꢈ
�ꢋ
ꢓꢉꢊꢔꢕꢀꢖ ꢗꢎꢘ
ꢋꢌꢀꢍꢀꢎꢏ ꢐꢑꢆ ꢈꢐꢒꢉꢊ
�ꢀꢁꢂꢀꢁꢃ
ꢈꢉꢊꢋꢌꢉꢍ ꢎꢏꢊ ꢐ
ꢄꢅꢆꢃꢃꢇꢈꢉ
ꢐꢇꢒ
ꢓꢒꢔ
ꢍꢆꢉꢇꢎ ꢒ
ꢊ
ꢌꢐꢑ
�ꢍ
��ꢙꢚꢔꢒꢌ ꢕꢋꢒꢔꢌꢏꢋꢊ ꢋꢛ ꢏꢌꢉꢑꢍ ꢑꢔꢜ ꢝꢔꢞꢜ
ꢓꢉꢊꢔꢕꢀꢖ ꢗꢎꢘ
ꢖꢗꢌꢌꢘꢙꢚꢗ
ꢛꢜꢔ ꢌꢇꢈꢝ ꢜꢜꢔ ꢌꢐꢑ
ꢑꢑ
�ꢒꢔꢕꢉꢖ ꢃꢋꢊꢉ ꢗꢈꢏꢑꢉꢊꢍꢏꢋꢊꢍ ꢏꢊ
ꢘ
ꢏꢊꢒꢓꢉꢍ
ꢙꢝꢗꢀ
ꢐ ꢜ ꢅ ꢗꢝꢞꢛꢏꢀꢕ
ꢇ ꢕꢀꢖ ꢗꢝꢞ
ꢐꢒ ꢕꢀꢖ ꢗꢎꢘ
* Note: Applicable to gull wing
and SMD versions only
*All specfications subject to changes without notice
DS-189 REV D
www.pericom.com/saronix
相关型号:
©2020 ICPDF网 联系我们和版权申明