SEL3602C-157.0000(T) [DIODES]
Oscillator, 33MHz Min, 157MHz Max, 157MHz Nom, Hybrid,;型号: | SEL3602C-157.0000(T) |
厂家: | DIODES INCORPORATED |
描述: | Oscillator, 33MHz Min, 157MHz Max, 157MHz Nom, Hybrid, |
文件: | 总2页 (文件大小:117K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SaRonix
Crystal Clock Oscillator
3.3 & 5V, (P)ECL
SEL3600 / SEL3700 Series
Technical Data
Frequency Range:
33 MHz to 157 MHz
Frequency Stability:
50 or 100 ppm over all conditionsꢀ calibration tolerance, operating
temperature, input voltage, load, aging, shock and vibration.
Temperature Range:
Operatingꢀ
0 to +70°C
Storageꢀ
-55 to +125°C
Supply Voltage:
Supply Current:
+5.0V or -5.2V or +3.3V PECL
70mA typ, 100mA max @ 5V
50mA typ, 100mA max @ 3.3V
Output Drive:
Symmetryꢀ
Rise & Fall Timesꢀ
Logic 0ꢀ
45/55% max V
or Complementary Outputs Crossing
BB
350ps typ, 550ps max, 20% to 80% of the waveform
ACTUAL SIZE
V
V
V
V
-1.60V max @ 10K 5V
-1.62V max @ 10K 3.3V
-1.02V min @ 10K 5V
-1.025V min @ 10K 3.3V
CC
CC
CC
CC
Description
Logic 1ꢀ
A crystal controlled, high frequency,
highly stable oscillator, compatible with
10K ECL Logic. The output can be dis-
abled and wired-OR to facilitate testing
or combining multiple clocks. Open
emitter output allows the user to adjust
termination to optimize matching and
performance. Complementary outputs
are standard.*
Loadꢀ
RMS Period Jitterꢀ
50Ω to V
-2V
CC
3.5ps max, 1ps max 1σ cycle-to-cycle jitter
Mechanical:
Shockꢀ
Solderabilityꢀ
Terminal Strengthꢀ
Vibrationꢀ
MIL-STD-883, Method 2002, Condition B
MIL-STD-883, Method 2003
MIL-STD-883, Method 2004, Condition B2
MIL-STD-883, Method 2007, Condition A
MIL-STD-202, Method 215
Solvent Resistanceꢀ
Resistance to Soldering Heatꢀ
MIL-STD-202, Method 210, Condition I or J
Applications & Features
Environmental:
Thermal Shockꢀ
Moisture Resistanceꢀ
MIL-STD-883, Method 1011, Condition A
MIL-STD-883, Method 1004
• Ideal for high resolution graphics &
imaging applications
• Provides 10K compatible outputs
• 3.3V PECL version available
• Frequency range is from 33 to 157
MHz, consult factory for frequencies
beyond this range
Part Numbering Guide
SEL3
6 0 1 B - 100.0000 (T)
• Disable/wired-ORoutputfeatureavail-
able
• Standard SMD 6-pin J-lead package
• Available on tape & reel; 24mm tape,
500pcs per reel
(T) = Tape & Reel
full reel increꢀents only (500pcs)
Blank = Bulk
Series
Supply Type
6 = Positive Supply, Pin 6 = VCC, Pin 3 = VEE
7 = Negative Supply, Pin 6 = VEE, Pin 3 = VCC
Frequency (MHz)
Stability Tolerance
B = 50 ppꢀ
C = 100 ppꢀ
Logic Type
0 = 10K, 5V
3 = 10K, 3.3V
Device Type (See Table I)
1 = Pin 2: NC
2 = Pin 2: Enable/Disable
*For internal termination or single output without disable contact factory.
DS-165 REV F
SaRonix 141 Jefferson Drive • Menlo Park, CA 94025 • USA • 650-470-7700 • 800-227-8974 • Fax 650-462-9894
www.saronix.com
SaRonix
Crystal Clock Oscillator
3.3 & 5V, (P)ECL
SEL3600 / SEL3700 Series
Technical Data
Output Waveform
Enable Function Truth Table where applicable (Table I)
Complementary
TRUTH TABLE
Logic 1
80%
V
Min
OH
Positive Supply
tive Supply
Outputs
Crossing
Pin 2
Logic 0 or N/C CLK Output
Logic 1
Logic 0
Pin 4
Pin 1
CLK Output
Logic 1
Pin 4
Pin 1
CLK Output
Logic 1
CLK Otput
Logic 0
20%
Logic 0
V
Max
OL
SYMMETRY
45% Min, 55% Max
Enable/Disable Propagation Delay: 10K: ( [ 1/f ] / 2 ) +250ps
Package Details
Supply Options (Table II)
Solder Reflow Guide
Reflow 235 5°C
250
6
5
4
4°C/sec max
Preheat 183 10°C
DENOTES
PIN 1
Device Type
SEL36XX
SEL37XX
Pin 3
VEE 0V / GND V / +3.3V
VCC 0V / GEE -5V / -3.3V
Pn 6
200
150
Cooling
SARONIX YYWW
FREQUENCY MHZ
PART NUMBER
10.4
.409
8.74
.344
max
4°C/sec max
Time
1
2
3
1 – 2 minutes
5 sec min
10 sec max
13.2
.520
max
6.1
.240
5.9
.234
Test Circuits
max
POSITPPLY (PECL)
0.46
.018
2.54
.100
(ForSEL701/3711
use -3.2V)
5.08
.200
+2V
0.51
.020
x45° CHAM
6
5: N/C
4
.75
.030
OSCILLATOR
50
Ω INTERNAL SCOPE
TERMINATION TO GND
1.50 .15
.059 .006
1
2
3
50
Ω INTERNAL SCOPE
8.74
.344
TERMINATION TO GND
-3V
or
FOR SEL360X: USE -3V
FOR SEL363X: USE -1.3V
ENABLE/DISABLE
OR N/C
Pin Functions:
-1.3V
"ECL COMPATIBLE INPUT"
Pin 1: Output
Pin 4: Output
Pin 5: N/C
Pin 2: Enable / Disable or N/C
Pin 3: V or V
or V
EE
CC
C
EE
NEGATIVE SUPPLY (ECL)
Recommended Land Pattern
-3V
or
FOR SEL370X: USE -3V
FOR SEL373X: USE -1.3V
-1.3V
*
5.08
0.20
6
5: N/C
4
OSCILLATOR
50
Ω INTERNAL SCOPE
1.27
TERMINATION TO GND
8.62
0.05
1
2
3
0.339
50Ω INTERNAL SCOPE
TERMINATION TO GND
2.5
0.1
ENABLE/DISABLE
OR N/C
+2V
2.54
0.1
"ECL COMPATIBLE INPUT"
*
External high frequency power supply decoupling required
All specifications are subject to change without notice.
DS-165 REV F
mm
Scale: None ( Dimensions in
)
inches
SaRonix 141 Jefferson Drive • Menlo Park, CA 94025 • USA • 650-470-7700 • 800-227-8974 • Fax 650-462-9894
www.saronix.com
相关型号:
©2020 ICPDF网 联系我们和版权申明